Underwater pelletizing unit

BKG Nordson A 300 - TVE1000 ED

Condition: new, capacity 2000 kg/h power 4,0 (5,2) kW (PS) electric outlet 400V 50Hz (3 phases) fuse 16 A dimensions: length 875 mm width 735 mm height 1 410 mm insertion resp. discharge height 1 510 mm weight 55 kg material varnished steel discharge height 450 mm suitable for pomaceous fruit, turnips, potatoes, corn, etc Hodpfxjb Nvino Ag Uefb scope of delivery schredder disc

Condition: excellent (used), machine/vehicle number: 040501, Henneken C2 vacuum tumbler in lovely condition. 3,650 litres, front and rear doors. Dimensions 2.55m wide, 2.04m long, 2.28m high. Also available (at extra cost) Henneken tote bin loader to match. Hfjdpfx Asqwhiijg Ueb

Condition: reconditioned (used), Stock - No.: 2553 1 used, partly overhauled and functionally tested Single-Screw Extruder, equipped with: Hfjdpfsiyyndox Ag Usb Material hopper loader Extruder BATTENFELD Typ UNI-EX 1-75-25 B Screw - Ø 75 mm – 25 L/D, Cylinder Air-cooled Extruder-Motor 120 kW – DC ( overhauled ) Screw –speed up to 130 r.p.m. additional Temperature controllers for down-stream equipment Control-Board with melt-pressure sensor / Display. Inspectiuon visist / trial-run shortly by appointment in our workshop Wuppertal Germany possible. We can offer, installed to this extruder: > screen-pack-changer > pelletizing ( strand, hot-face or waterring ) > other equipment Send us your inquiry. More extruder and complete pelletizing lines ex our workshop Wuppertal, send us your inquiry or visit us, you´re welcome

Year of construction: 2011, condition: good (used), Shredder system, single-shaft shredder, shredder, chipper, cutting mill, single-shaft crusher, rotor mill -Shredder system: completely made of stainless steel, for frozen meat or other -Motor power: 4 kW -Speed: approx. 60 rpm -Number of cutting knives: 10 pieces -Dimensions cutting blade: 250 mm -Filling spout 500 x 895 x H480 mm -Dimension 880/1390/H2060 mm Hfodpfxsh Di H Ds Ag Uob -Weight 640 kg

Year of construction: 2006, operating hours: 15,000 h, condition: good (used), For sale is an Erema 1007T. Year of manufacture: 2006 Operating hours: 15,420 Hedpfoumubyjx Ag Uefb Throughput: 250-350 kg/h Currently, the system is used to process HDPE, but it is also suitable for other plastics such as LDPE. The system can be viewed during operation. A new extruder screw was installed in February.

Condition: new, Extraction capacity of filter unit at spigot*: 350 m³/h Total power consumption*: 0.09 kW Operating voltage: 230 V, 50/60 Hz, 1PH + N + PE Noise level*: 52 db(A) Dimensions L/W/H in mm: L 329 / W 374 /H 510 Colour: RAL 7035 Weight: 25 kg Manufacturer: ISI Industrieprodukte GmbH *Depending on the filter equipment Special voltage or special colour on request Application: Extraction of oil mist and smoke, for small to very large machine workrooms. Your advantages of the ELBARON series: - 18 unit variants available - Direct from the manufacturer - ISI-TRONIC as standard (digitalised filter control) Hfsdoh Rdwxspfx Ag Usb - Electronically controlled EC fan as standard - Speed and air flow rate adjustable - Simplex (single-stage) or duplex (two-stage) available - Wide range of air flow rates available - Adaptable to pollutant load and air performance requirements - Large range of mounting and connection accessories - Quality Made in Germany We have developed the ELBARON® filter series for use in machining operations with pure oil or for separating oil mist and smoke. For many years now, the digital electrostatic air filters of the ELBARON® series have been among the most efficient filter units on the market and are in use worldwide. Our filter units are already digitalised as standard and can be controlled, for example, using a laptop. The ELBARON® unit series comprises 18 unit variants and can be optimally designed for your application in terms of size and performance. ELBARON® units impress with their long service life and absolute functional reliability. Our electrostatic filter cells are dimensioned in such a way that the best possible filter efficiencies, service lives and trouble-free operation are achieved under economic aspects.

Year of construction: 2023, condition: new, Nitrogen self-generation plant for the production of a wide range of purities, pressures and volume flows. Consisting of high-quality components, such as filters, adsorbers, nitrogen separation unit of the company Parker Hannifin and the compressor manufacturer Käser. If you need high pressure compression we cooperate with Bauer Kompressoren. More than 400 units have been installed at our customers. Gz7iapb Hodpfxsnq Di Te Ag Ujfb All plants are assembled by us and adapted according to your space conditions and needs. We also plan and realize container plants for outdoor and indoor installation. We are looking forward to your inquiries...

Year of construction: 2023, condition: as good as new (ex-display), Up-stroke construction pressing force 300 kN pressing surface 300 x 300 mm specific force 3,3 N/mm² opening 200 mm heating platen as solid steel plate electrical heated up to 300°C (570 °F) control Siemens S7-1200 with 12" Touchpanel Hfsdpfxskuz T Uo Ag Ujb mechanical safety door data collection

Year of construction: 2024, condition: new, machine/vehicle number: SPIN500, Co-lead Spin Dryer is a small-sized vegetable centrifuge machine that removes excess water from leafy vegetables and other fresh produce. The basket with the product is placed in the machine and once the lid is closed, the engine will start running. A magnet locks the lid during centrifuging. Suitable for dewatering leafy vegetables, fruit, and vegetable material surface after cutting. The body is made of SUS304 stainless steel, which has a delicate appearance. It is equipped with a basket for dehydration, which is more convenient to store. The machine can set the dehydration time and dehydration speed, and the operation is stable. It is suitable for all kinds of Hfedeiniz Dspfx Ag Ueb fruit and vegetable industries, and large and medium-sized industrial catering enterprises’ demand for vegetable dehydration. * Use frequency conversion centrifugal technology to complete the surface dehydration of the material; * Use frequency conversion technology and optical sensing technology to realize the draining time and speed, and turn on and off control. * Full open design, easy to install and take out during Vegetable Processing. * Driving by frequency conversion adjusting speed three or single asynchronous motor, stable running, convenient for speed adjustment

Condition: new, Year of construction: 2024, pressure: 8 bar, Miter setting horizontally 15°- 90°15° infinitely variable saw motor 5.50 KW (400 volts) saw blade 600 mm traversing range rear stop 180 mm working height 940 to 1000 mm adjustable via feet 2 x suction nozzles (above in the hood and below) net weight 600 kg WxDxH 135x140x150 cm RAL 9007 gray aluminum rotary plate polished nickel steel Saw head with recirculating ball guides designed with high accuracy and long service life and high rigidity. Sawing material can be preloaded with low pressure when the hood is open. Hydropneumatic sheet feed Chip flow towards the extraction hood. Furnishing • Precision underfloor circular saw • Miter adjustment 0º/ 45º/ 90º/ -45º / -60º continuously • incl. 2 pneumatic vices (vertical) • Infinitely adjustable saw blade feed • Two-hand safety control • Adjustable material stop (rear) • Suction device-swarf extraction system Othgf • Mist spray device for air-oil cooling • Air gun with spiral hose • incl. maintenance unit with pressure reducer • Ergonomically arranged control panel Hsdpfxsgwt S To Ag Uofb • maximum cutting height 230 mm Hxdcvds7y • Saw blade 600mm • Saw blade not included! Our NC pusher system ensures that your machining parts are positioned at the desired machining position on our UK 600 HA 90°. A gripper clamps the material, the NC control positions the material automatically. The tension and the sawing process are then triggered. The positions are previously programmed into the program control. Once the machine tool has completed your machining, it automatically moves to the next sawing position. Depending on the processing part, several parts can also be clamped on top of each other/next to each other and positioned at the same time. It is always possible for you to inspect the desired system in our production/demonstration hall. Please do not hesitate to contact us.