Wood chipper

Weima WL4

Condition: as good as new (ex-display), Year of construction: 2026, Quiet and slow runner WL 4/18,5 kW Technical data: Hopper opening: 600 x 800 mm Hopper opening with logspacer:600 x 1050 mm hopper capacity: approx. 0,6 m³ Working width of the rotor: 600 mm Diameter of the rotor: 252 mm Guodpfjbtnftsx Ai Njc Number of knives: 28 pieces Knives: 40 x 40 mm concave Sieve perforation: 15/20 mm Included: Control cabinet Electrical control Star-delta start-up Rubber vibrating elements 2nd row of knives Logspacer (free cutting hopper) Top equipment Location: Ex stock Bitburg - immediately available - at a special price

Condition: reconditioned (used), power: 30 kW (40.79 HP), hopper volume: 800 l, working width: 800 mm, Slow-speed shredder, 800 x 1000 mm hopper, 30 kW motor, hydraulic pusher, reversible knives Guodpfjwzg Taox Ai Nec

Condition: as good as new (ex-display), Year of construction: 2026, Quiet and slow runner WL 4/18,5 kW Technical data: Hopper opening: 600 x 800 mm Hopper opening with logspacer: 600 x 1050 mm hopper capacity: approx. 0,6 m³ Guodpobunq Hefx Ai Nsc Working width of the rotor: 600 mm Diameter of the rotor: 252 mm Number of knives: 28 pieces Knives: 40 x 40 mm concave Sieve perforation: 15/20 mm Included: Control cabinet Electrical control Star-delta start-up Rubber vibrating elements 2nd row of knives Logspacer (free cutting hopper) Location: 54634 Bitburg Immediately available

Condition: used, Year of construction: 2026, Special price - exhibition machine Technical specification WL 4 Hopper opening with log spacer 600 x 1,050 mm Hopper content 0.6 m³ Working width of the rotor 600 mm Diameter of the rotor 252 mm Drive power 18.5 kW Rotor speed 80 -120 rpm Number of knives 28 Type and size of knives concave / 40 x 40 mm, cutting reversible crowns Screen perforation 15-20 mm Painting WEIMA Standard RAL 2002 / 7016 Connected load 400 V +/- 5% / 50 Hz Weight approx. 1,300 kg Including: • Control cabinet* (Rittal) including electrical control (Moeller / Siemens) and star-delta start-up • Rubber vibration elements • V - rotor (patented) with knife pockets milled into the profile • Gear limit switch • Slider cycle • Slider half back • Log spacer hopper • 2. Knife series Storage location: Supplier Gujdpfey D E U Iox Ai Njc

Year of construction: 1995, condition: good (used), Kuper veneer zig-zag splicer machine, type FW/ 1200-E year of manufacture 1995 S/N 3508 3179 Specific features of the KUPER FW 1200 E: high feed speed of 60 m/min. electronically infinitely variable width of zig-zag pattern glue thread cutting device max. veneer thickness : 3,0 mm min. veneer thickness : 0,3 mm Guodpohbp Ifsfx Ai Njc glue thread with hot air heating Compressed air discus for transporting the veneer over the veneer table control via foot pedal feed speed : 35-60m / min Volt: 400 V, 50 Hz Total power 1,35 kW working height 915mm weight approx. : 440 kg Dimension : 2,12m x 0,73m x 1,55m

Condition: used, Year of construction: 1991, total length: 1,660 mm, total height: 1,470 mm, total width: 1,100 mm, Colour: Grey Empty weight: 1.300 kg - Year: 1991 - Documentation available: No - CE certificate present: No Gujdpfx Aiowu Uy Is Noc - Serial number: 500-1014 - Main motor power [kW]: 18.5 - Rotor width [mm]: 600 - Opening width [mm]: 600 - Opening length [mm]: 800 - Sieve perforation [mm]: 15 - Number of rotating knives [pcs.]: 1 - Transport dimensions: 1660mm x 1100mm x 1470mm (l x w x h) - Transport weight [kg]: 1300kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: new, Year of construction: 2025, Weima single-shaft shredder Type: WL 4 Rotor diameter: 260 mm Rotor width: 600 mm Self-cutting hopper Logspaser (600x1050 mm) Motor power: 18.5 kW Double knife row with 28 pcs. Weight: 1300 kg Extraction nozzle: 160 mm incl. bolted extraction trough. Gjdpexwyx Sofx Ai Neuc Screen perforation: 15 / 20 mm (or as requested and agreed) Stock machine immediately available. Price ex stock Rosenheim, excluding shipping.

Condition: excellent (used), Year of construction: 2018, Roller glue spreader OSAM S2R-1300 + disc table OSMA TDM Working width: 1300 mm Maximum working height: 100 mm Manual adjustment of working height 2 glue rollers (top and bottom) Disc table OSAMA TDM 1300-3000 CE marking Year of manufacture of the set: 2018 Gsdpfx Aioxrdv De Neuc

Condition: used, Year of construction: 2023, Special price on request!! Demonstration machine! Machine Concept: The WEIMA high-performance shredders, with their flexible application possibilities, can process all types of wood materials (hardwood, softwood, chipboard, MDF materials, plywood, veneer waste, etc.) into fuel chips and achieve enormous volume reduction, especially with bulky materials. Operation: The machine is equipped with a large feed hopper, which can be loaded either by conveyor belt or manually. The hopper can be customized according to individual requirements and ensures continuous and cost-effective material feed without the need for manual assistance. A hydraulically controlled pusher supplies the wood waste to be shredded to the rotor's cutting area, operating automatically and load-dependently. The internal slider guides are made of highly wear-resistant plastic (polyamide) and can be adjusted. The hydraulic cylinders are mounted with universal joints to prevent lateral forces on the piston seals. The patented, profiled V-rotor made from solid steel has a diameter of 252 mm and operates at a rotor speed of 80–120 rpm. The concave-ground, aggressive, and four-way reversible cutters / cutting crowns are located in milled knife pockets on special cutter holders. This patented system, by enabling for the first time the reduction of the cutting gap between the counter knife and rotor, ensures high throughput capacity, low energy consumption, and optimal discharge of shredded material. Power transmission from the electric motors is via V-belts to a heavy-duty gearbox mounted on one side of the rotor shaft. Gedpsvfy Rzjfx Ai Nouc Technical Specification: Motor power: 18.5 kW Hopper opening: 600 x 800 x 1,050 mm Working width – rotor length: 600 mm Rotor diameter: 256 mm Rotor speed: 60–100 rpm Number of knives: 28 Type and size of knives: concave / 40 x 40 mm cutting crowns Screen hole diameter: 12–15 mm Paint: WEIMA Standard RAL 2002 / 7016 Connection: 400 V +/- 5% / 50 Hz Weight approx. 1,300 kg Standard equipment: - V-rotor with one knife row 40 x 40 mm - Vibration-damping machine feet - Pressure bar on pusher - Horizontal pusher - Control cabinet with 5 m cable, incl. PLC control and LOGO! text display - Bolted screen - WEIMA WAP gearbox - Extraction socket Ø160 mm - Straight feed hopper Additional equipment: - Additional rotor knife row (28 knives) - Self-cleaning hopper (LOGSPACER) - 4-way segmented floor - Fast-reverse hydraulics with shock valve Location:

Condition: good (used), functionality: fully functional, Rotor approx. 250 mm Feed opening approx. 600 x 800 mm Rotor length approx. 600 mm Motor 18.5 kW Technical data on request Gsdsy A Rqlepfx Ai Neuc

Condition: new, Year of construction: 2026, Extremely powerful industrial magnet for iron separation Special price: €990 net (shipping €14.90 net) *Construction lengths can be found in image 2 The active side is equipped with a stainless steel end plate (material 1.4301). Threaded holes are provided on the rear side for mounting; *handle available on request The block magnet systems can be used at temperatures of up to max. +100°C operating temperature. The magnet surface should be cleaned regularly from captured iron parts. Pickup distances for all types, for example: For a steel nut M5: approx. 60 mm For an M5 x 30 screw: approx. 100 mm Gusdpfx Aetqfhxsi Nec Mounting example 1: Mounted above a conveyor belt, 'iron parts jump onto the holding surface of the magnet.' Mounting example 2: Mounted within a pipeline system with direct contact to the material flow. For maximum separation safety, a cascade setup of multiple block magnets in series is possible. Assembly and safety instructions: When handling, already upon unpacking and later during installation, ensure that there are no loose iron parts, such as tools or screws, nearby. The magnetic force is so strong that painful injuries may occur if fingers get caught between iron parts and the active surface. There should be no steel parts under the active surface within a minimum distance of 400 mm.

Condition: used, Year of construction: 1993, output 18,5 kw number of blades 28 Gjdsyk H Tqjpfx Ai Njuc Weight 1300 kg

Condition: like new (used), engine power 18.5 kW hydraulic pressing drawer feed hopper height 90 cm + additional 200 cm Godpfxjyzm H To Ai Nouc operating pressure 180 bar control panel operation CE marking year of manufacture 2002

Condition: used, Year of construction: 1999, Shredder Nazzareno K700 Serial number: 97013 Year of manufacture: 2007 Motor power: 18.5 kW Opening: 740x1400 mm Rotor length: 750 mm Screen diameter: 10 mm Guedpewh Na Aefx Ai Nsc Includes feeding conveyor Transport dimensions: 3600×1350×1900 mm (L×W×H), Weight: 3500 kg - Year: 1999 - Documentation available: No - CE certificate present: No - Serial number: 97013 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: new, Year of construction: 2025, Year of manufacture: 2025/2 Engine power: 18.5 kW Speed: 90 1/min Guedevw Tw Ejpfx Ai Nsc Weight: 1.3 tons Rotor lengths: 600 mm Rotor diameter: 252 mm Rotor knives: 28 pcs Funnel: 600 x 1050 mm with an extra-ribbed sliding plate