Brush-anchoring machine

Valmec 600

Condition: like new (used), Working width 600 mm Two brushing rollers Two 4 kW motors Infinitely variable feed speed Fgodpfx Acjytp Tfswea Roller height adjustment (up/down) Power supply 400V 650 kg Year of manufacture: 2021

Condition: used, Year of construction: 2023, functionality: fully functional, Due to the conversion of our drying process, we are selling our walking floor dryer. Drying container / dryer in like-new condition due to limited use. 40” Container, Drying container TC40ft WISSMATEC. Both used and new components: - 40ft sea container - Drying floor with slotted bridge plate - Hydraulic walking floor with cylinder and external quick coupling - Discharge via trough screw conveyor 0.75 kW - Rotary valve 0.75 kW. External length ≈ 12,200 mm, width ≈ 2,440 mm, height ≈ 2,655 mm, weight ≈ 6,500 kg. Year built: 11/2023. Fgedpfewzycbex Acwsa

Condition: new, Working width: 600 mm Maximum element height: 300 mm Feed speed: 4-12 m / min Fgodpfx Asgpgyqscwoa Engine power: 2x4 kW Power supply: 400V Manual height adjustment of the working unit Independent positioning of the first and second work units Safety switch 2 brushes included

Condition: new, Year of construction: 2026, Engine power 5HP Blade diameter 250mm Blade revolutions per (min) 5300 Automatic pneumatic movable table Galvanized iron and polyzene supports √ Fodpfx Acou Rqq Howjga Maximum horizontal cutting length 4200mm Maximum vertical cutting height 2200mm Maximum horizontal cutting height 2080mm Maximum cutting depth 60mm

Condition: excellent (used), functionality: fully functional, SURFACE PLANER model SCM F 520 second hand machine n.4 knives Tersa length of ground surfaces: 3000 mm hydraulic foot pedal lift volts: 380/50 Fedpowt T Hdofx Acwsga Other models available as shown in the photos second hand machines

Condition: refurbished (used), Our Edwards GV250 pumps will: be good as new be checked after the manufacturer's specifications, for example its tolerances be fitted with new wear parts be available at short notice Fgedpfxofq Rgij Acwja included one-year warranty

Condition: used, Year of construction: 2019, Used machine Fgedpfx Acowka Ntswea Year of manufacture: 2019 Equipment and technical data: Cutting height: vertical 2,150 mm, horizontal 2,070 mm Cutting length: 5,300 mm Cutting depth: 80 mm Saw blade: diameter 303 mm, bore 30 mm, Z=60 alternate top bevel teeth Saw blade speed: 5,000 rpm Motor: 5.5 kW Required air pressure: 6 bar Measurement readout for: - horizontal cuts: via scale and strip cutting stop - vertical cuts: via scale from 0 - 1,300 mm Extraction port: 100 mm 5 material support rollers per meter of cutting length 1 infeed and 1 outfeed roller Pneumatic workpiece clamping device between the support rollers 1 central support element per meter of cutting length Twist-resistant, freestanding machine frame Pneumatically retracting slatted frame Round bar guide vertical and horizontal Fine-adjustable folding stop Fine adjustment for horizontal cuts via handwheel Strip cutting stop Manual programming rail with 5 T-nuts Pneumatic plunge of the saw unit Pneumatic saw head lock Control unit at the saw assembly: start button, stop button Operator panel with template holder Electronic digital display for the saw unit Electronic digital display for the folding stop Automatically swiveling saw head Location: Flörsheim Availability: short-term

Condition: used, Year of construction: 1987, pressure / t stroke / mm table-size / mm weight of the machine ca. 65000 kg Make: Shepherd Type: SVRM Fodpeuddcasfx Acwega 4-roller bending machine: Year of construction: 1986 Working width: 3000cm Smallest pipe diameter with 600 mm roller: Ø 720 mm Smallest tube diameter with 360 mm roller: Ø 460 mm Sheet thickness up to (depending on the material): 50 mm Material SA- 738 B Working width: 2500 mm Material SA- 738 B Material thickness: 35 mm conical bending: Except for the top roller, all rollers can be moved in an inclined position for conical bending. The roller positions can be read on display instruments. For semi-automatic or fully automatic operation of the machine, the bearing jewels of the rollers are equipped with scale bars and slide cams for limit switch actuation. This allows the rollers to return to the same set position over and over again, giving a very high level of uniformity in the shot wefts being bent.

Condition: used, No. 3213 Thermal treatment system / vacuum dryer WTT Used, year of construction 2017 Thermal treatment system / thermal chamber for the modification of wood The WTT thermal chamber is a system for the thermal modification of wood. It enables efficient treatment of 2 to 3 batches per day, depending on the thickness and type of wood. The system has a powerful energy and heat transfer system and works with a gas or oil-fired boiler system that uses thermal oil as a heat transfer medium. Technical data: Capacity: 5950 - 9900 m³ of wood per year (for 330 working days) Usable volume: 9 m³ (with 50 mm wood thickness) Stack dimensions: 10500 x 1300 x 1100 mm LWH Minimum board thickness: 10 mm Power connection: 3 x 400 V, 50 Hz + zero + earth, 63 A Specific power consumption: 15.9 kW/m³ Maximum heat output: 2 MW (230 °C - 250 °C thermal oil) Heat consumption: 120 kWh/m³ wood Autoclave length: 11,000 mm Autoclave diameter: 1,800 mm Autoclave material: 10 mm stainless steel duplex EN 4462 Door opens hydraulically, with 1.5 kW drive Working pressure: 0.1 to 15 bar (absolute) Working temperature: 0 °C to 220 °C 200 mm glass wool insulation, clad with 1 mm galvanized sheet steel Main components: 1. autoclave, in which the heat treatment takes place 2. vacuum system that sucks the air out of the autoclave before heat is applied 3. energy center with a 2 MW oil burner 4. 4 MW cooling system with dry coolers Fsdsv Si Szepfx Acwega 5. nitrogen generator 6. gas cooler system Heating and cooling system: Heat exchanger: 8 units (4 on each side) Material: Stainless steel pipes (seawater resistant) Total floor area: 165 m² Cooling water consumption: 1000 l/batch (not contaminated, only heated) Control and operation: Control system: WTT ExoT (fully automatic) 22” color monitor, IBM computer, printer Sensors: 4 PT100 temperature sensors 2 mechanical thermometers 1 vacuum/pressure transmitter 1 mechanical vacuum/pressure gauge Special equipment: Hydraulic rail bridge for convenient transportation of wooden trolleys Automatic trolley extraction with cable winch (1.5 kW) 2 MW thermal oil boiler (heating) Fuel oil tank (4000 l) with measuring system Insulated 20 foot steel container for heating module Stainless steel safety chimney (300 mm diameter, 6000 mm length) Functional description: 1. filling the autoclave with wood 2. creating a pre-vacuum 3. filling with gas 4. heating 5. modifying 6. cooling 7. pressure equalization 8. creating a post-vacuum / drying 9. pressure equalization 10. emptying Certified EC Pressure Equipment Directive (PED) 97/23/EF Construction EN 13445 Sale on behalf of customer, from location near 5020 Salzburg (Austria), without dismantling, transportation and assembly Dismantling, loading and transportation by us optionally possible Subject to errors in the description and price To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended Sold as is Technical details, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “purchased as seen” Pictures and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices excl. VAT, payment before collection or dispatch Terms of delivery: ex location

Condition: new, Type 1300-2S Working width 1300 mm Min.working length 400 mm Working thickness 2-80mm Grinding roller speed - Frequency control Fgodpjm Dr Rgsfx Acwoa Feeding speed 5-20 m/min Total motor power 6.27 kW Transport dimensions 1700x2100x1400mm Weight 1200 kg Price 6100 Eur (EXW Jonava, Lithuania)