Band-resaw CENTAURO SUPERCUT 80

Centauro Supercut 80

Condition: new, Thin layer from 2 mm thickness Maximum cutting accuracy up to ± 0.15 mm Minimal kerf, cutting thickness from 1.3 mm Ideal for the cutting of dried and wet wood or alternative materials Surface of the thin layer ready for gluing without need of further processing steps Friendly user electronic control Two programmable speeds of the carpet (0-30 m/min) for the best cutting quality and to safeguard the blade life Optical sensor to start cutting cycle and speed change Ground table “Flexam” belt feeding for the best performance 6 rubber idler rollers adjustable in height, for opening/closing to ensure the best pneumatic pressure on the workpiece during feeding and cutting Oleo-pneumatic tensioning of the blade for better cutting performance Top and bottom ‘’Chaco’’ blade-guides which guarantee the best stability blade during cutting Internal/external lubrication of the blade to remove residues of resins and chips 4 dust extraction to optimize the suction of dust and chips Cutting height of 400 mm (500 mm optional) Cutting width up to 400 mm High quality powerful motor kW 15 (HP 20) Ethernet connection for on line service Nkedpfedcd Dlsx Agwow Carbide or stellite blades for best cutting performance DM of saw wheels mm 800 Max. cutting height mm 400 fixed working table mm 1290 x 800 Max. saw blade width mm 54 x 0,9 Max. & min. saw blade length mm 5530 / 5380 motor Kw 15 (HP 20) suction connection nr 2x Ø 120 & 1 x Ø 100 compressed air requirement bar 6/ 27 ltd machine weight Kg 880 feed speed m/min 0 - 30 height of feeder belt mm 300 length of feeder mm 750 feeder roller DM mm 160 Max. feeder opening mm 200 Max. fence opening mm 200 feeder speed var. mt/ min 0-30

Year of construction: 2023, condition: new, Chopping height max. mm. 200 Infeed width mm. 500 Infeed rollers piece 3 Rotor flight circle mm. 600 Chopping length approx. mm. 20-30 output - output 16 - 20 rm/h chipping Chipper blade piece 2 Feed motors kW 2x2,2 Weight approx. net kg 4100 Inlet : horizontal machine base : steel, inert gas welded Rotor : steel, inert gas welded, dyn. balanced. Bearing : Oversized roller bearings. Bearing housing : Steel, flanged housing. Feed rollers : steel, special toothed. Chip outlet : underneath the machine. Machine grate : (sieve) for secondary crushing of excess lengths. Drive pulley : Matched to main motor Nedpfx Aencd Azjgwekw N=1500 min-1 Hydraulic system : consisting of: Hydraulic pump, diaphragm accumulator, cylinder, pressure gauge, control valves for lifting of the upper feed roller. Feeding : by 2 gear motors, Make NORD GEAR

Condition: new, Year of construction: 2025, functionality: fully functional, exhibition machine minimum slat thickness 2mm magnetic fence position reader adjustable pulling roller spacing material presence detector tape cooling/lubrication system wheel diameter 800mm engine power 15kW smooth feed speed adjustment pneumatic pulling roller pressure control panel with colour touch screen screw tape centring pneumohydraulic tape tensioning Nsdpfx Ajv Dh R Tsgwokw year of production 2025 - brand new machine total weight 1300kg 380V power supply Machine available in March

Condition: new, Year of construction: 2026, Oy Foudila Ab is a company, in Kaskinen, Finland with over 45 years of experience in equipment for timber handling. For the past 15 years, we have also been active in pallet industry and have developed a lot of machines over the years for nailing, automatic timber feeding and stacking. We manufacture both standard machines and customized solutions for the customer's purposes LNM3500 is a flexible, compact and efficient pneumatic nailing machine for manufacturing legs for pallet production. User-friendly program, which means the changeover takes place very quickly and the machine can save settings for over 100 different legs. Three Bostitch nail guns with magazines for jumbo coils equipped with indicators. Possible to produce legs with 2-30 blocks/leg. Equipped with large cassette for boards. Protective cover for sound attenuation and for a safe function. The machine is controlled from a 10" touch screen. Beckhoff control system. The machine can be equipped with an optimized block cutter, as well as automatic block feeding into the nailing machine. The block cutter can be mounted on the back side of the nailing machine or on the side. Dimensions for standard machine: - Boards: Length 600-3500mm, Width 60-125mm, Height 16-28mm - Blocks: Length 60-150mm, Width 60-125mm, Height 50-100mm Capacity: Njdpfx Aei Hkqmegwjkw - 21 blocks/min Machine dimensions (without block cutter): - Length 9000mm, Width 1000mm, Height 1900mm The machines is CE-marked. The leg nailing machine can also be equipped with automatic stacker for finished legs. Do not hesitate to contact us for more information, pictures and videos.

Year of construction: 2026, condition: reconditioned (used), functionality: limited functionality, machine/vehicle number: 559, Dryer optimized for thick timber or hardwood Usable length: 5000 mm Usable height: 1100 mm Usable width: 1100 mm Njdeya Ik Aepfx Agwjkw New electrical cabinet and sensors Controlled drying function Missing external rail and trolley (can be supplied or we will assist the buyer with fabrication) Dryer can be inspected in department 74

Condition: good (used), Year of construction: 1996, Weinig Unimat 23 four-side planer - German production - grooved top - year of production 1996 - pulling rollers in the table top TECHNICAL PARAMETERS: planed width 230 mm planing height 160 mm grooved top spindle diameter 40 mm 1 lower spindle 7.5 kW 2 right spindle 7.5 kW 3 left spindle 7.5 kW 4 upper spindle 11 kW 5 lower spindle 7.5 kW feed smoothly adjustable 6-36 m / min 5.5 kW feed motor power six top steel pulling rollers two upper rubber pulling rollers three pullers in the table top pneumatic feed pressure pneumatic shoe clamp spindles with brakes pre-table length 1970 mm electric height adjustment central lubrication (split) diameter of nozzles 140 mm dimensions of the machine (length / width / height) 410/200/180 cm Nodpfoh Dwl Dsx Agwskw weight ~ 3000 kg

Condition: good (used), Year of construction: 1994, 2 side planer top - bottom Nkedpfehuthyjx Agwow constant table ( always same infeed height ) max. planing width 600 mm max. planing height 280 mm planing shafts with strip knives immediately ready for use

Year of construction: 1980, condition: good (used), Stellite forming machine VOLLMER GF10U Blade thickness 1 to 4mm Nkjdpfegxb Ebox Agwew Width band saw blades 60 to 420 mm circular saw blades 300 to 1.200 mm Ø electric feed drive via gear motor

Condition: used, Year of construction: 2023, functionality: fully functional, Due to the conversion of our drying process, we are selling our walking floor dryer. Drying container / dryer in like-new condition due to limited use. 40” Container, Drying container TC40ft WISSMATEC. Both used and new components: - 40ft sea container - Drying floor with slotted bridge plate - Hydraulic walking floor with cylinder and external quick coupling - Discharge via trough screw conveyor 0.75 kW - Rotary valve 0.75 kW. External length ≈ 12,200 mm, width ≈ 2,440 mm, height ≈ 2,655 mm, weight ≈ 6,500 kg. Year built: 11/2023. Njdpfx Agowzycbswekw

Condition: used, No. 3213 Thermal treatment system / vacuum dryer WTT Used, year of construction 2017 Thermal treatment system / thermal chamber for the modification of wood The WTT thermal chamber is a system for the thermal modification of wood. It enables efficient treatment of 2 to 3 batches per day, depending on the thickness and type of wood. The system has a powerful energy and heat transfer system and works with a gas or oil-fired boiler system that uses thermal oil as a heat transfer medium. Technical data: Capacity: 5950 - 9900 m³ of wood per year (for 330 working days) Usable volume: 9 m³ (with 50 mm wood thickness) Stack dimensions: 10500 x 1300 x 1100 mm LWH Minimum board thickness: 10 mm Power connection: 3 x 400 V, 50 Hz + zero + earth, 63 A Specific power consumption: 15.9 kW/m³ Maximum heat output: 2 MW (230 °C - 250 °C thermal oil) Heat consumption: 120 kWh/m³ wood Autoclave length: 11,000 mm Autoclave diameter: 1,800 mm Autoclave material: 10 mm stainless steel duplex EN 4462 Door opens hydraulically, with 1.5 kW drive Working pressure: 0.1 to 15 bar (absolute) Working temperature: 0 °C to 220 °C 200 mm glass wool insulation, clad with 1 mm galvanized sheet steel Main components: 1. autoclave, in which the heat treatment takes place 2. vacuum system that sucks the air out of the autoclave before heat is applied 3. energy center with a 2 MW oil burner 4. 4 MW cooling system with dry coolers 5. nitrogen generator 6. gas cooler system Heating and cooling system: Heat exchanger: 8 units (4 on each side) Material: Stainless steel pipes (seawater resistant) Total floor area: 165 m² Cooling water consumption: 1000 l/batch (not contaminated, only heated) Control and operation: Control system: WTT ExoT (fully automatic) 22” color monitor, IBM computer, printer Sensors: 4 PT100 temperature sensors 2 mechanical thermometers 1 vacuum/pressure transmitter 1 mechanical vacuum/pressure gauge Special equipment: Hydraulic rail bridge for convenient transportation of wooden trolleys Automatic trolley extraction with cable winch (1.5 kW) 2 MW thermal oil boiler (heating) Fuel oil tank (4000 l) with measuring system Insulated 20 foot steel container for heating module Stainless steel safety chimney (300 mm diameter, 6000 mm length) Nodpfev Si Szjx Agwekw Functional description: 1. filling the autoclave with wood 2. creating a pre-vacuum 3. filling with gas 4. heating 5. modifying 6. cooling 7. pressure equalization 8. creating a post-vacuum / drying 9. pressure equalization 10. emptying Certified EC Pressure Equipment Directive (PED) 97/23/EF Construction EN 13445 Sale on behalf of customer, from location near 5020 Salzburg (Austria), without dismantling, transportation and assembly Dismantling, loading and transportation by us optionally possible Subject to errors in the description and price To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended Sold as is Technical details, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “purchased as seen” Pictures and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices excl. VAT, payment before collection or dispatch Terms of delivery: ex location