Measuring Plate

UNBEKANNT Granitplatte 755x560x75mm

Condition: excellent (used), Motor-driven rotary shift table Stepless rotary table (pitch 0.001°) Fgodpfx Afoif Rlbekoc Manufacturer: Rückle Type: PKT 6 Clamping surface: 1600 mm x 1600 mm Travel lengthwise: W-axis = 1000 mm Condition: Very good (used)

Condition: like new (used), Year of construction: 2025, Used cantilever rack: screw system in hot-dip galvanized design Scope of delivery: 4 rack uprights, height 4,160 mm with foot section, 1,200 mm usable depth 12 cantilevers with 1,200 mm usable depth, standard Longitudinal and diagonal struts for 4,000 mm rack length (distance 1,300 mm) Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) Fedpfemhhf Sjx Afkjgc - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Surface hot-dip galvanized - Rack height 4,160 mm - Load capacity per upright 2,250 kg - Foot section and cantilever arms with 1,200 mm Usable depth - Cantilever arms height adjustable in 100 mm increments - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and C4 load plates in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with registration before delivery. The material is packed sensibly to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and suitable for dowels and must be able to absorb the loads. The customer must check and ensure that the floor conditions and load-bearing capacity, as well as any official permits that may be required, are obtained. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and is not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: new, ZEATZ PHL Linear Rotary Tables – Rotary and Linear Tables for Workpieces up to 80 tons The ZEATZ PHL linear series combines highly precise rotary table technology with an integrated linear axis, offering maximum flexibility for complex machining tasks. Ideal for positioning, simultaneous rotation, and interpolation machining of large and heavy workpieces. Your advantages at a glance: ✔ Combination of rotary table and linear axis in a single unit ✔ Integration into existing machines (controls: HEIDENHAIN / SIEMENS / FANUC) ✔ Service & technical support directly from JMT ✔ Customized designs and customer-specific solutions Why ZEATZ: ZEATZ stands for highly precise NC rotary tables and innovative solutions for demanding machining processes. Due to their robust design, backlash-free drive systems, and state-of-the-art control technology, the systems are ideally suited for heavy machining and the highest accuracy requirements. Technical Features: Applications: Positioning | Simultaneous Rotation | Interpolation Machining Table sizes: 1,000 x 1,000 mm 1,200 x 1,200 mm 1,500 x 1,500 mm 1,800 x 1,800 mm 2,000 x 2,000 mm 2,500 x 2,500 mm 3,000 x 3,000 mm 3,500 x 3,500 mm 4,000 x 4,000 mm (round clamping surfaces also possible) Max. workpiece weight: Fgsdom Tv Azspfx Afkjc approx. 6,000 to 80,000 kg Linear axis: Optional integrated traversing axis Travel: approx. 1,000 to 3,000 mm (in 500 mm steps) Positioning accuracy: ± 5 arc seconds Integration: Compatible with HEIDENHAIN, SIEMENS, and FANUC controls Your advantages as a JMT customer: ✔ Official distribution partner for ZEATZ in Germany ✔ Technical support and on-site service ✔ Fast spare parts supply ✔ Support with integration and commissioning ✔ Reference projects available in Germany Contact us – we will be happy to advise you and prepare a customized offer.

Condition: refurbished (used), End mill, flute cutters, Corner milling cutter Make Walter type prototype P 31 23017-20 shank diameter 20 mm cutting diameter approx.19 mm cutting length 38 mm freshly ground and coated Fodpfx Aoiuh E Iofkegc Material HSS Co

Condition: ready for operation (used), Plate size: 1900 x 1820 mm Plate thickness: 405 mm Fgodpfx Aehc S Rnsfksc with 20 mm offset surface: 1820 x 385 mm Weight approx .: 4 t

Condition: new, Year of construction: 2020, table load: 60,000 kg, load capacity: 60,000 kg, DEMMELER DRALT 2500 tilting rotary table. New, newer used stored in heated warehouse. 2,500 x 2,500 mm, 60 ton. Linear travel 2,500 mm. Tilting 10°. Continues rotating. Linear measuring system Heidenhein LC 185. Fedpfxswdiwae Afkjgc

Condition: new, Year of construction: 2024, functionality: fully functional, input voltage: 400 V, overall weight: 95 kg, Equipment: documentation/manual, type plate available, Extraction capacity of filter unit at spigot*: 2200 m³/h (free-eye) Total power consumption*: 0.62 kW Operating voltage: 400 V, 50/60 Hz,3Ph+PE Noise level*: 65 db(A) Dimensions L/W/H in mm: L 1623 / W 508 /H 545 Colour: RAL 7035 Weight: 95 kg Manufacturer: ISI Industrieprodukte GmbH *Depending on filter equipment Special voltage or special colour on request Filter equipment*: - 40 mm aluminium mesh pre-filter (optional/retrofittable: PrePac pre-filter package) - 1 piece electrostatic filter cell - 20 mm knitted aluminium post-filter (optional: 40 mm post-filter range) OPTIONAL: Several pre-filter packages possible The application: Horizontal, electrostatic air cleaner with EC centrifugal fan for separating oil mist, emulsion mist and smoke from the hall air in recirculation mode. Vertical raw air capture via intake manifold with suction nozzle. Clean air recirculation via adjustable diffusion grille. Your advantages of the ELBARON series: - 6 appliance variants available - Directly from the manufacturer - Electronically controlled EC fan as standard - Adjustable speed and air flow rate - Simplex (single-stage) or duplex (two-stage) available - Wide range of air flow rates available - Adaptable to pollutant load and air performance requirements - Large programme of mounting and connection accessories Fedpsum Uzaefx Afksgc - Quality made in Germany We have developed the hall extraction system as a cost-effective alternative to expensive centralised extraction systems or complex individual machine extraction systems. This allows you to protect the health of your employees and maintain your factory building without major investment. We have developed the ELBARON® filter series for use in machining operations with pure oil or for separating oil mist and smoke (oil mist separator). For many years now, the digital electrostatic air filters of the ELBARON® series have been among the most efficient filter devices on the market and are in use worldwide.

Condition: good (used), Year of construction: 2000, Measuring and granite plate, manuf. Oelze, 1000x1500 x 220 mm, with base frame Fgsdpfx Asxxzp Uofkjc

Condition: like new (used), Zero point clamping system Fgsdpfx Ajhlu Nzofkjc For rotary table: Manufacturer: Vischer & Bolli GmbH Type: 07/447749/Z This zero-point clamping system was used on a FIBRO rotary sliding table with a clamping surface of 2500 x 2500 mm. For clamping plate: Zero point clamping system Manufacturer: Vischer & Bolli GmbH Type: 07/447749/Z Dimensions: 2290 x 1000 x 120 mm

Year of construction: 2011, condition: like new (used), Offer on request 2 pieces available Motor power: 3 KW Voltage: 400 V Maximum capacity: 40 LM Pressure: 20 Bar Tank capacity: 980 Lt. Weight: 900 kg with cooling system EUROCHILLER GC-B A 009 SP - year 2011 400 V 50 HZ 6 Kw 9 A 24 Vaux 500 VI 54 IP R407c gas Fjdpedtyx Ejfx Afkjgc Air condenser: 25°C Water process: 15°C Weight: 4 kg