Cantilever rack

Kragarmregal einseitig Höhe: 4.160 mm Nutztiefe: 1.200 mm / Länge: 4.000 mm

Condition: like new (used), Year of construction: 2025, Used cantilever rack: screw system in hot-dip galvanized design Scope of delivery: 4 shelf uprights, height 4,160 mm with foot section, 1,200 mm usable depth 12 cantilevers with 1,200 mm usable depth, standard Longitudinal and diagonal struts for 4,000 mm shelf length (distance 1,300 mm) Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) Kfsdpfxjmhh Dto Aa Esa - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Surface hot-dip galvanized - Shelf height 4,160 mm - Load capacity per upright 2,250 kg - Foot section and cantilever arms with 1,200 mm Usable depth - Cantilever arms height adjustable in 100 mm increments - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and C4 load plates in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with registration before delivery. The material is packed sensibly to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and suitable for dowels and must be able to absorb the loads. The customer must check and ensure that the floor conditions and load-bearing capacity, as well as any official permits that may be required, are obtained. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and is not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: used, mileage: 34,275 km, power: 110 kW (149.56 HP), first registration: 10/2000, fuel type: diesel, overall weight: 8,000 kg, color: green, gearing type: mechanical, emission class: euro2, number of seats: 3, Year of construction: 2000, Equipment: all wheel drive, Flatbed body large roof hatch Ksdpfxjhyu Tqs Aa Ejfa All-wheel drive with differential locks Double passenger bench seat Permissible maximum weight: 8,000 kg Unladen vehicle weight: 4,700 kg... and much more. ----The vehicle is unprepared (in original condition)! Nationwide delivery available at an extra cost. Errors and prior sale reserved. We are happy to take your vehicle in trade. Financing / leasing possible even without down payment! Do you have any further questions? We are happy to advise you!

Condition: new, New equipment, made in Denmark. Lifting time: 18 secs. Kodpjd Hp Efofx Aa Ejfa Loading and unloading by means of pallet truck. Items are lifted to an ergonomically correct working height. Remote controlled lifting/lowering with emergency stop. Consumption 0,75 kW. Capacity: 1000 kg. Voltage: 3 x 400 V. Minimal lifting height: 80 mm. Maximal lifting height: 780 mm. External dimensions: 1420 x 1140 mm. Internal free space: 585 mm. Lifting / lowing speed: 42 / 48 mm/s. Weight: 235 kg.

Condition: used, mileage: 29,232 km, power: 110 kW (149.56 HP), first registration: 10/2000, fuel type: diesel, overall weight: 7,490 kg, color: green, gearing type: mechanical, emission class: euro2, number of seats: 3, Year of construction: 2000, Equipment: all wheel drive, 1106. GW22W194650 Flatbed large roof hatch all-wheel drive with locks passenger double seat braked trailer load 8000KG Kfedpfjqml Arex Aa Esa vehicle weight (G) 4660 KG... and much more ---- The vehicle is unprepared! Nationwide delivery possible for an additional charge. Subject to errors and prior sale. We are happy to accept your vehicle as part payment. Financing/leasing also possible without a down payment! Do you have any questions? We are happy to advise you!

Condition: new, Best price 4499 Eur (EXW Jonava, Lithuania) Dimension of sliding table- 2200x375mm Gross cut capacity- 1500mm Width of cut between saw blade and rip fence - 1140mm Saw blade diameter - 400mm Height of cut (90°) - 115mm Height of cut (45°)- 105mm Speed of main saw spindle - 4500/6000rpm Main spindle diameter - 30mm Tilting saw blade - 0-45º Saws lifting, up and down, electrical control. Main motor - 5,5 kW Scoring saw blade diameter - 120mm Speed of scoring saw blade - 7000-8000rpm Scoring saw diameter - 20mm Scoring motor - 1,1 kW Kodpfx Aednxydja Eofa Weight: 700 kg * Using the blade 400mm, the smaller should be removed. Reduced saw blade should be used with not more than 350 mm main shield.

Condition: excellent (used), Grinding length 1000 mm Kodpfx Aek Abxxoa Ejfa grinding diameter fi 350 mm In very good condition.

Condition: ready for operation (used), Year of construction: 2008, machine/vehicle number: 100810261, type of cooling: water, SHINOHARA 75 VP AMBIDEXTROUS (1+4 COLORS) CIP3. AUTOMATIC CHINCH PASS AUTOMATIC WASHING. UV LAMPS. WATER COOLER WITH AUTOMATIC ALCOHOL MIXING PH. AUTOMATIC METERS. WASHING ROLLER WINDER DISTRIBUTED WITH THE MACHINE. FLOOR FAN. 2 CALIBRATION DEVICES 20 SPARE CYLINDERS. PRINTING 4600000 Kjdpfx Aaotvmq Ns Eofa

Condition: excellent (used), Weinig four-sided planer max planing width 230mm max planing height 120mm 5 heads, bottom-5,5KW; left and right-11KW, top-11KW, bottom-5,5KW feed - 4KW fully adjustable heads electrically adjustable up and down and planing width 40mm spindles feed on gimbal rollers, with smooth adjustment WEINIG brand solid planer, length of the machine 415cm machine checked in original condition Ksdpfxerigxye Aa Eofa

Condition: excellent (used), Year of construction: 1997, Rover 20 machining center Kfjdolc Dwnopfx Aa Eea Working area 2,893 x 950 mm, milling spindle with ISO30 tool holder 3.6 kW, drilling unit with 10 vertical and 6 horizontal drills as well as grooving saw, 6-fold tool changer. The NC410 control had a floppy disk drive and a colour screen as well as the simplest, graphically supported programming options. Furthermore, the Rover 20 already enabled pendulum machining. Dimensions: approx. 3800 x 2000, height 1600 Control cabinet: 950 x 700 x 1300 From location

Condition: new, Hydraulic winch for wood splitters, cranes, mini excavators, tractors, tractors, viticulture, horticulture and many other applications. With the hydraulic winch you can make many applications easier. - Pull the firewood to the log splitter and set it up - pull logs on trailers - Pull out rootstocks and trees - As an attachment winch on back cranes and small excavators - As winch for small tractors and narrow track tractors A robust steel construction with 3-sided screwing possibility (left, right, back) with 12 threaded holes, this offers many possibilities for fastening the winch (threads are cut and painted. They have to be re-cut with a tap before use because of the rust protection). A 20 m long and 6 mm thick steel cable is mounted. Large pulley for long life of the steel cable. We mount hydraulic motors from 50 to 630 ccm (standard = 400 ccm). Depending on which speed and traction you need. Maximum working pressure: 225 bar peak Continuous operating pressure: 175 bar Displacement: 400 ccm Torque at 225 bar: 870 Nm peak Kjdpfxsdf Ua Rs Aa Ejfa Torque in continuous operation: 380 Nm Maximum tractive force: 1700 kg Weight: 49 kg rope speed: 47 m/min at 60 L/min hydraulic oil Colour: red Dimensions: Length: 500 mm Length with pendulum: 570 mm width front: 120 mm Width rear: 180 mm bearing width: + 30 mm Motor width: + 200 mm Height: 250 mm Item number: HAW1700 NOTE: Figure 1 is marked with m