Wood shredder

UMP TECHNIKA VVSG Shredder

Year of construction: 1980, condition: ready for operation (used), An old drying kiln (approx. 40 years old) Brunner is available. External dimensions X/Y: approx. 6000mm/8000mm. On-site inspection is possible. Pgodpfovbigwjx Ag Dew

Condition: excellent (used), Circular saw flat motor KATT 11 kW / 1450 rpm, flange Ø 200 mm, right-hand thread, second stub shaft for hydraulic pump drive with pulley 150 mm Ø, tested and with new bearings. Pedpsh D Rt Ajfx Ag Dogw

Condition: used, Year of construction: 2002, functionality: fully functional, machine/vehicle number: 220992, SECOND HAND END CUTTING SAW WITH ELECTRONIC PUSH FEED STROMAB MOD. TR500 MATRIX - CE RULES - infeed with roller table and electronic push feed MATRIX of 6000mm - Outfeed roller table1500mm - 10 hp motor - Blade diameter: 500mm - Blade rotation speed: 3500 rpm - Maximum cutting capacity: 360mm (L) at 55mm (H), 200mm (L) at 135mm (H) - Minimum cutting section: 20mm (L) x 10mm (H) - ELCO numerical control Pjdst U I A Hopfx Ag Degw - 415 volts - Serial number: 220992 - Year 2002

Year of construction: 2023, condition: new, Chopping height max. mm. 200 Infeed width mm. 500 Infeed rollers piece 3 Rotor flight circle mm. 600 Chopping length approx. mm. 20-30 output - output 16 - 20 rm/h chipping Chipper blade piece 2 Feed motors kW 2x2,2 Weight approx. net kg 4100 Inlet : horizontal machine base : steel, inert gas welded Rotor : steel, inert gas welded, dyn. balanced. Bearing : Oversized roller bearings. Bearing housing : Steel, flanged housing. Feed rollers : steel, special toothed. Chip outlet : underneath the machine. Machine grate : (sieve) for secondary crushing of excess lengths. Drive pulley : Matched to main motor N=1500 min-1 Hydraulic system : consisting of: Hydraulic pump, diaphragm accumulator, Pjdpfx Agjncd Aze Dsgw cylinder, pressure gauge, control valves for lifting of the upper feed roller. Feeding : by 2 gear motors, Make NORD GEAR

Condition: new, Year of construction: 2025, Drum chipper series ATH S&F chippers and drum chippers with horizontal infeed are used in many areas of the wood processing industry (sawmills, timber mills). Chippers from the ‘ATH’ series produce high-quality and homogeneous wood chips with a low proportion of fines from residual wood, for example as quality chips for the cellulose industry or as fuel chips for energy generation ATH 220 series - Feed height: 200 mm - Feed width: 500 | 700 | 1000 mm - Number of chipper knives: 2 - 4 pieces - Number of counter knives: 2 pieces - Rotor diameter:520 mm - Number of feed rollers: 3 pieces - Throughput: up to approx. 40 rm/h * - Chipping length: 5 - 50 mm - Chipper drive power: 22 - 110 kW - Drive power feed rollers: 2 x 2.2 kW - Operating/control voltage: 400/220 V, 50 Hz Pedpfx Aouz Hmxeg Degw - Weight: 2,800 - 4,000 kg ATH 330 series - Feed height: 300 mm - Feed width: 500 | 700 | 1000 mm - Number of chipper knives: 2 - 6 pieces - Number of counter knives: 2 pieces - Rotor diameter: 700 mm - Number of feed rollers: 3 pieces - Throughput capacity: up to approx. 70 rm/h * - Chipping length: 5 - 80 mm - Chipper drive power: 37 - 250 kW - Drive power feed rollers: 2 x 3.0 kW - Operating/control voltage: 400/220 V, 50 Hz - Weight: 3,500 - 5,000 kg *depending on chipper length, kW main motor, number of knives, feed Advantages: - Maximum throughput - Low fines content - Low maintenance - Flexible use - Customised production

Condition: excellent (used), Optimizing cross-cut system GreCon type 2004 with infeed cross conveyor with outfeed conveyor with 4 ejectors with chain bed Technical specification: Max. width of workpieces: 250 mm Max. Thickness of workpieces: 80 mm Diameter of saw blade: 450 mm Cutting speed: 90 m/sec. Pgedpon Hwl Aofx Ag Dsw Saw motor: 5,5 kW Control saw shaft: pneumatic Drive chain: servo motor Min. working width: 40 mm Min. input length: 500 mm Net weight: approx. 1.800 kg was overhauled and then no longer used Location: Austria, near Ried im Innkreis

Condition: good (used), Year of construction: 2006, Drum chipper, high-speed with horizontal infeed max. infeed width 450 mm max. infeed height 140 mm Motor 75 kw with frequency converter for variable speed Podpfx Aou Rl Rujg Dogw no vibrating chute included

Condition: excellent (used), Year of construction: 2014, Scheuch cyclone with rotary valve and spark extinguisher for wood chips Cyclone as bunker or silo structure with attached rotary valve Designation: fru v 1000-04/014-B Serial No.:/Year: F-1633/14 Pgedouvdpljpfx Ag Dow System is dismantled and immediately available

Year of construction: 2004, condition: good (used), Built in 2004 Heating capacity 20.8, 23.4, 31.2 kW Pedpfxed S Svhs Ag Degw Temperature max 280 ° C Exit height 300-400 mm Tunnel width max 500 mm Transport speed adjustable 5-25 m/min Electrical 400 VAC Electrical 3 Ph, N+PE Electrical 50 Hz Electrical depending on heating 18-30 kW Dimensions (L x W x H) 2600 x 1100 x 1500 mm Equipment: Trimer for delayed switch-off Pressure trolleys on exit Cooling blower above exit Lateral film blowing devise Integrated socket 16 A Chain lubrification

Condition: used, For sale - 3 kilns. Excellent technical condition; visual condition as per photos. Please see dimensions and specification for each kiln in attached pdf document. Kilns has been dismantled and standing in our warehouse. We can arrange an assembly of the kilns in the buyers location. For any further questions and inquirys, please feel free to contact us. Pgjdow Apncopfx Ag Dew