Drum Chipper ATH 220 series

S&F GmbH ATH-220/530/3 | ATH-220/730/3

Condition: like new (used), Year of construction: 2008, operating hours: 8,348 h, functionality: fully functional, machine/vehicle number: 2887, pressure: 8.5 bar, power: 2.276 kW (3.09 HP), operating pressure: 8 bar, temperature: 176 °C, total height: 2,950 mm, total length: 5,100 mm, nominal heat output: 2.276 kW (3.09 HP), total width: 2,400 mm, empty load weight: 6,500 kg, Equipment: CE marking, ATTSU RL3000/8 steam generator on sale. The steam generator is in very good conditions and has a low mileage of 8348 operating hours. The generator was used in a factory of pickled vegetables which stopped activity. The boiler has been kept preserved ever since. The boiler includes a fuel oil burner (optional), but can be fired with gas. An inspection on the boiler was performed in June 2025 by a boiler specialist which include thickness measurements and pressure test. The test results were favourable. Boiler Datasheet Manufacturer: ATTSU Model: RL 3000/8 (tube fired) Burner: Fuel oil Serial Number: 2887 Steam Production: 3000 kg/h of saturated steam Dcedpjwxd Atjfx Am Rjh Rated Pressure: 8.3 bar Test Pressure: 12.5 bar Volume: 3125 liters Year of Manufacture: 2008

Condition: new, Fully automated block cutting machine for pallet legs. Maximum length of raw material 6m. The machine suits all type of pallet production. OKKR-2006 can operate as a separate standing machine or as part of a production line. How does it work? Dodpfjwdutmsx Am Rech The machine is fed block material on the chain infeed conveyor. The material is fed automatically and the machine cuts the blocks into the preinstalled length. OKKR-2006 can be programmed to cut several different lengths of blocks from the original piece of raw material. Maximum length of the raw material is 6m. Asssembled block size: Min / max length: 600 mm - 6000 mm Width min / max: 75 mm - 150 mm Thickness min / max: 75 mm - 100 mm Specifications Operators | 0 Length | 7,5 m Width | 2,5 m Height | 1,8 m Power | 7 kW, 3x400 V+N Pneumatic system | 7 bar compressed dried air: 450 L/min Should be filled and controlled | Lubrication points Machine capacity | 36 blocks/min Standard equipment | 1 electric motor for saw blade 1 electric motor for material infeed 1 electric motor for chain infeed Mychrome has various additional machine modules that can be easily docked onto existing machines to achieve a higher level of automation. The ability to change the design and size of the pallets is still available with these additional machine modules.

Year of construction: 1980, condition: good (used), Stellite forming machine VOLLMER GF10U Blade thickness 1 to 4mm Width band saw blades 60 to 420 mm circular saw blades 300 to 1.200 mm Ø electric feed drive via gear motor Dodpjgxb Ebsfx Am Rsch

Year of construction: 2024, condition: new, ‼️SONDERANGEBOT‼️HIER IN STOCK IN HEILBRONN! Only while stocks last! ‼️SOFORT AVAILABLE ‼️AUF LAGER‼️ Powerful, robust machine at an affordable price from Josan & Söhne Alligator shears small: ➡️3 kw motor ➡️7 up to 8 shear strokes per minute. ➡️Maße 1100x980x800 mm ➡️Gewicht approx. 275 kg ➡️Spannweite 15cm ➡️Messer can be turned over at some point when they are blunt, allowing you to work with them for longer ➡️UVV (accident prevention regulation) made by German company here Net 3.999,00€ +19% VAT 759,81€ Gross 4.758,81€ Alligator scissors large: Dedpfxsp E Ehqe Am Rsch ➡️Motor 7,5 kw ➡️30 cm span ➡️7 up to 8 shear strokes per minute. ➡️Maße 249x109x174 cm ➡️Gewicht approx. 1500 kg ➡️Messer can be turned over at some point when they are blunt and thus work longer with them ➡️630 KN pressure ➡️Hydraulikdruck 21 mpa ➡️UVV (accident prevention regulation) made by German company here PRICE ON REQUEST Pictures/equipment may vary. Errors/changes excepted

Condition: used, Year of construction: 2007, SINGLE SHAFT SHREDDER WEIMA MODEL WLK15 MAIN MOTOR 90KW Dedotqdxfspfx Am Rsch ROTOR KNIVES SIZE 50X50 (NEW KNIVES) ROTOR LENGTH 1500MM ROTOR DIAMETER 370MM THE MACHINE IS 100% FUNCTIONAL READY TO WORK

Condition: used, Year of construction: 2024, Rear section Primera DMC 4200 l 1-fold conveyor section Single-shoot distributor heads / f. 16 rows Long loading board for rear section Drawbar with folding support foot / lower linkage attachment Cat. 3 braked axle with parking brake / dual-circuit air brake system Dcodpfxouhnwvj Am Rsh

Condition: as good as new (ex-display), Demonstrator with 7 operating hours Another machine available immediately (ex works in Neckartailfingen) MRZ 830 Shredder Custom tariff number: 84659600 Feed opening 800 x 1000 mm Motor: 18.5/22 kW; 400 V - 50 Hz - 3 ph Blades: multi-rotatable Hydraulically operated slide gate Screen perforation of your choice (10 - 40 mm) Weight approx. 1,600 kg Dimensions (L x W x H) approx. 2,290 x 1,420 x 1,750 mm Turbo clutch Included as standard: - Automatic star/delta start-up - Fast hydraulics - Auto. OFF when the rotor is idle - Speed 70-90 rpm for high throughput - Cycle control to avoid idle times - Performance-enhancing step control of the hydraulic slide - Pertinax guides for the hydraulic slide - Vibration-damping machine feet - CE compliant . The shredder is designed for shredding natural wood, particle board, and MDF, as well as other materials after testing and approval by the manufacturer. Included: - Raise the shredder by 30 cm (prepared for conveyor belt) Additional shredder options: Dcsdpsv Sqrpefx Am Roh - Articulated conveyor belt + €8,770 net Horizontal section: 1,200 mm Rising section: 2,500 mm Angle: adjustable from 0-60 degrees Discharge height: approx. 2,000 mm + - 100 mm - Overbelt magnet + €6,780 net - Conveyor belt and overbelt magnet control + €2,750 net (Start and stop synchronized with the shredder) Raw material requirements: - The moisture content (dry) must be below 30% - Metals and mineral contaminants such as sand, stones, etc. lead to increased wear

Condition: new, Year of construction: 2024, Maximize Profit with TRV 1200L and TRV 1600L: From Sawmill to Firewood TRV 1200L Ø550: Efficiency and Speed for Continuous Cutting Optimize waste management and turn production scraps into immediate economic value! The TRV 1200L Ø550, with its advanced design, is the ideal solution for sawmills needing to dispose of large amounts of multilaminate trims and log side sections. The result? A continuous and automated disposal process that converts waste into high-quality firewood. Key Features: Simplified handling: randomly load trims and waste onto the low-wear conveyor/roller VV. Smart clamping system: innovative technology allows processing of overlapping pieces of different shapes and thicknesses. Advanced precision: PLC-automated cutting system with timed length control of trimmed pieces. Dsdev Ip T Rjpfx Am Roch Independent sectors: equipped with 5 sectors, each with its own pneumatic cylinder and shock absorbers for maximum stability. Enhanced Safety: Advanced protection system: access door to moving parts with forced-lock safety micro-switch. Sealed, non-duplicable security key for exclusive access. Protective tunnel with sealed key and reinforced blade guard for superior safety. Rapid blade motor stop (

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, Press type JJZ-CP is designed for the production of plywood, doors, MDF board. Feeding and receiving of glued elements from the press is done automatically by means of driven rollers. The press can cooperate with glue feeders. Technical data: -max.pressure 500T/ adjustable/ Dcodpfx Ametutwvj Roh -max. batch height 1300mm -max. charge size 1300x2500 -press dimension 3600x1370x4500 mm -Press position ~500mm below floor level -feeding table 2000x1960 mm -receiving table 2350x2500 mm -max.power 13,2 kW -CE mark

Condition: new, Year of construction: 2023, New machine Year of manufacture: 2023 Partnership Edition Technical Specifications: Cutting height: vertical: 0–2,150 mm, horizontal: 80–2,000 mm Cutting length: 5,300 mm Cutting depth: 80 mm (55 mm with clamps) Saw blade: Diameter 303 mm, bore 30 mm, Z=60 hollow flat-top tooth Blade speed: 5,000 rpm Required air pressure: 6 bar Measurement readout for horizontal cuts: - via scale from 0–2,070 mm - via strip cutting fence from 75–500 mm Measurement readout for vertical cuts: - via scale from 0–1,300 mm Extraction connection: 1 x 100 mm, 1 x 120 mm Features: - ADVANCE clamping system, consisting of 2 pneumatic clamping grippers, motorized on vertical axes via a ball screw, moving from top to bottom. The grippers handle panels weighing up to 150 kg. - Torsion-free, free-standing machine frame - Round bar guides, vertical and horizontal - Pneumatically retractable slat bed - Fine-adjustable flip stop with extension - Fine adjustment for horizontal cuts via handwheel - Strip cutting fence - Manual programming rail with 5 T-slot nuts - Pneumatic immersion of the saw unit - 25 material support rollers - 1 infeed and 1 outfeed roller - Pneumatic workpiece clamping device between the support rollers - 3 intermediate support elements, pneumatically extendable - Pneumatic saw head locking - Control panel with documentation holder - Switch unit on the saw unit: start button, stop button - Tool cabinet - Scale illumination for vertical cuts Partnership Edition Features: - Digital display for the flip stop - Digital display for the saw unit with incremental mode - Pneumatically tiltable saw unit - Scoring system with controlled counter-air nozzle, numerical display for scoring or grooving depth setting, and activation indicator - 5.5 kW motor including star-delta starter - Cutting line laser Dcodpfx Aew I U D Ejm Rsh Availability: Short-term Location: Flörsheim