Injection Moulding Machine

Stork ST 13000-1200

Condition: excellent (used), Year of construction: 2018, operating hours: 17,000 h, clamping force: 220 kN, screw diameter: 50 mm, Year: 2018 Type of control: CC300 Number of hours: 17,000H Storage location: MECA PLASTIC Deadline: AVAILABLE Closing force: 220 T Opening stroke: 530 mm Between columns: 620 mm x620 mm Plate dimensions: 900mm x900 mm Mini/max mold: 250/600 mm Max gap between plates: 1220 mm Screw diameter: 50mm Screw length: 20D cm3: 432 Bars: 2002 Psdjvtm Uiepfx Aa Ejrf Motor power: 29kw Heating power: 15.3kw Closing weight: 11.3T Length dimensions: 6.30m Width dimensions: 1.80 m Height dimensions: 2.10 m Cores: NO Robot interface: YES Bimetal: YES

Condition: used, machine/vehicle number: 12579, Rotor diameter: 450 mm Rotor width: 650 mm Prsdjkyzavjpfx Aa Eef 3-knife rotor 2 rows of stator knives inlet cross section approx. 450 x 650 mm drive motor: 37 kW

Condition: good (used), Year of construction: 2023, operating hours: 50 h, Brand Ferromatik Milacron GmbH Type eQ-280 - 2290 Year of manufacture 2023 Machine hours 50 hours Clamping force 2,800 kN Screw diameter 60 mm Podjw Ebpwopfx Aa Esrf Injection pressure 2,238 bar Maximum shot volume 905 cm³ Max. distance between tie bars 710 x 660 mm Min. mould height 250 mm Distance between plates max. 1,400 mm Dimensions (LxWxH) 8,500 x 2,100 x 2,500 mm Weight 18,400 kg

Condition: excellent (used), Year of construction: 2017, WITTMANN BATTENFELD MacroPower 900/8800 Injection Moulding Machine Servo-hydraulic injection moulding machine Clamping force: 9,000 kN (900 tons) 🔹 General Information: Year of manufacture: 2017 Control system: UNILOG B8 Installed power: 53.9 kW Operating hours: only 999 Dry cycle time: 4.0 – 770 sec/mm Prsdewzy N Uspfx Aa Eef Machine dimensions (L x W x H): 10,100 × 3,400 × 2,700 mm Machine weight: 35,200 kg 🔹 Injection Unit: Screw diameter: 105 mm Injection volume: 4,545 cm³ Screw rotation speed: 159 rpm Screw L/D ratio: 22 Nozzle stroke / max force: 129 mm / 950 kN Max nozzle travel: 525 mm Number of heating zones: 7 🔹 Clamping Unit: Clamping force: 9,000 kN Max mould opening stroke: 1,800 mm Min / max mould height: 600 mm / 1,200 mm Max daylight (between platens): 2,400 mm Tie bar spacing (H × V): 1,450 × 1,100 mm Ejector stroke / force: 300 mm / 165 kN Mould opening force: 300 kN Core pulls: 2

Condition: used, Year of construction: 2015, Technical details: closing pressure: 6600 kN weight of the machine ca.: 45,5 t Pedpfxjw I E R Ns Aa Eerf

Condition: excellent (used), Year of construction: 2015, WITTMANN BATTENFELD TM 400/3400 injection molding machine Control -UNILOG B6P Year of production – 2015 NUMBER OF HOURS WORKED 33756 ServoPower SO package: Servo drive with variable speed for hydraulic pump to increase energy efficiency and shorten cycle times according to EUROMAP 60 Cycle II and Cycle III _____ Technical data of injection unit: • Screw diameter: 85 mm • L/D ratio (length to diameter): 22 • Specific injection pressure: 1574 bar • Injection volume (calculated): 2128 cm³ • Max. injection weight (PS): 1936.4 g Pedswqd Tcepfx Aa Eorf _____ Technical data of closing unit: • Closing force: 4000 kN • Free space between columns: 710 × 710 mm (W × H) • Min. mold height: 300 mm • Max. plate spacing: 1380 mm • Opening stroke: 670 mm

Condition: good (used), Year of construction: 2014, operating hours: 29,646 h, clamping force: 900 kN, screw diameter: 100 mm, injection weight: 3,691 g, opening stroke: 1,120 mm, We are offering a HAITIAN MA 9000 injection molding machine in excellent condition, ideal for high-volume plastic production. This machine has been carefully maintained and has very low operating hours ( Prodpfx Aasxc U Hzj Esf

Condition: ready for operation (used), Year of construction: 2020, operating hours: 10,000 h, functionality: fully functional, clamping force: 9,000 kN, screw diameter: 100 mm, displacement volume: 3,691 cm³, Clamping force 9000 kN Distance between tie bars (h x v) 1180 x 1000 mm Mould opening stroke 1600 / 1000 mm Mould height min 500 / 1400 mm Max. daylight 2400 mm Hydraulic ejector - stroke 300 mm Ejector force 195 kN Injection unit: Screw diameter 100 mm Ls/D ratio 22 Injection pressure 1800 bar Stroke volume 3691 ccm Shot weight (PS) 3359 gr. Screw speed 135 1/min Plasticising rate max. 793 g/s Electric and Hydraulic Equipment: Nominal capacity of pump motor 85 kW Installed heating capacity 71 kW Reservoir capacity 780 ltr. Dimensions and weights: Predpexcakrefx Aa Eef Dimensions of the machine ca. 9,24 x 3,21 x 2,88 m Total machine weight 38000 kg Accessories: - Anti vibration pads - 4 x 8-fold water flower Additional Options: - 2 x Air valves - 2 x hydr. Core pulls on movable plate - 2 x hydr. core pulls on fix plate - 1 x pneum. Core pull on movable plate - 1 x pneum. Core pull on fix plate - Robot interface according to Euromap 67

Condition: good (used), Year of construction: 2019, EASYMASTER EM480-SVP-2 injection molding machines Injection volume 2164 cm3 Prodpsubuznofx Aa Ejf Clamping force 480 T

Condition: excellent (used), Year of construction: 2012, machine/vehicle number: X 44733, Plastic injection moulding machine | Stork S+ 4400-2150 - Clamping force: 4400 kN - Opening stroke: 720 mm - Tie bar distance: 730 x 730 mm - Mould height: 500–1050 mm - Screw diameter: 62 mm - Shot volume: 951 cm³ - E-Screwdrive Psdpfx Aaexwva Es Ejrf An inspection can be arranged at any time by appointment.