Mobile extraction system

Riedex XtractPlus 350 15,0 kW FU

Condition: new, Year of construction: 2026, Max. edge thickness 3 mm (optionally up to 8 mm) Min/Max. work piece thickness 8–60 mm* Min. workpiece length approx. 200 mm* Min. workpiece width approx. 80 mm* Feed speed approx. 10 m/min. Ready to operate approx. 6 min. Power consumption max. approx. 14 kW Electrical connection 400 V – 3 Ph – 50 Hz Machine dimensions 5,250 x 1,230 x 1,430 mm (LxWxH) Weight approx. 1,700 kg pre-milling head Whispercut Nodpfx Aeg Tu Rkskielh radius for corner rounder R = 2mm heatable infeed fence quick change device f.motor corner rounder change motor for corner rounding unit including HM profile cutter radius for change motor R = 1mm Radius Multi-Radiusscraper R2/R1 wheels release agent spraying unit cleaning agent spraying unit protection spraying edge nesting pneumatic 3-point adjustment

Condition: as good as new (ex-display), Year of construction: 2023, machine/vehicle number: AH00004861, functionality: fully functional, operating pressure: 6 bar, temperature: 15 °C, NEW OPTIONAL SEMI-INDUSTRIAL EDGEBANDER SEMI-INDUSTRIAL WITH SIMPLIFIED CONTROL PANEL Make: SCM Model: K360 T-ER1 Year: 2023-2024 CE AH00004861 MACHINING CAPACITIES : - Panel height: 8 - 50 mm Thickness: 10 to 45 mm with use of rounding tool - Length of panel to be clad: 210 to 2500 mm - Minimum panel width: 90 to 1100 mm - Roll edge thickness: 0.4 to 3 mm without rounding max 3 mm with rounding - Strip edge thickness: max 6 mm without rounding max 3 mm with rounding - Edge width: panel thickness +2mm on each side - Drive (feed speed): 11 m/min - Workpiece spacing: 600 mm - Part protrusion from transfer chain (panel protrusion): 30 mm MACHINE COMPOSITION : - Reel table - Predisposition to receive an air-cushion table - Work table with front extension - Drive belt: chain - Non-stick spray unit - Edge straighteners (2 routers) rpm Diamond tools - Gluing unit with interchangeable tray Pneumatic pre-cutter Marouflage (pressing) with 3 rollers (1 motorized) - Chop-saw butt-cutting unit Nlsdpjttakhefx Akioh - Nesting copying top/bottom trimming unit - Rounding unit - Radius scrapers - Straight scrapers - Edge finishing spray device (Nebulization) - Textile polishing brush station - General power supply: 400v. Three-phase+N+T 50Hz Options installed on the machine : - 10.09.98 European safety standards (CE standards) - 63.05.29 Provision for an eventual air cushion plane at machine inlet - 62.15.02 "Nesting" copier kit - 62.12.03 "AAR" anti-stick group - 62.12.61 Nebulization device for edge finishing - 62.14.55 Diamond tools H=64 on grinding group - n.2 cuts - 62.15.06 "SGP-E" glue pot - Instead of the standard glue pot - 62.15.04 "RC-N" glue scraper group - 62.12.12 "SP-V" brush group Machine available : in stock

Condition: new, bore capacity in steel (diameter) 60 mm bore capacity in cast iron (diameter) 70 mm threading cutting capacity: M50 throat 420 mm bore stroke 260 mm spindle taper MK 5 Nsdpfxofg U Tuo Akislh feed range - spindle 0,1-0,2-0,3-0,4-0,5-0,6 mm/U spindle turning speed range 64 - 1210 U/min transmission ratio 12 Stufen column diameter 220 mm table surface area 600 x 600 mm total power requirement 4 kW weight of the machine ca. 0,82 t dimensions of the machine ca. 0,7 x 1,2 x 2,7 m Equipment: - Gears made of hardened and ground steel - Front speed selector lever - Gear lubrication by automatic oil pump - Integrated coolant device - Machine lamp - Rotatable and tiltable table - Automatic feed with electromagnetic clutch - Handwheel for manual fine feed - automatic tool ejector - Integrated electrical controls in the drill head - Pushbutton for EMERGENCY STOP - Switch for right / left rotation - Height-adjustable chip protection hood with microswitch - CE mark

Condition: excellent (used), Year of construction: 2017, Separator, dust separator, welding fume filter, filter system, cartridge dust extraction system, cartridge filter unit, cartridge filter -Condition: unused, without extraction fan -Manufacturer: INFASTAUB, filter system cartridge filter with pneumatic filter cleaning -Type: AJV 800-980-22 P -Cyclone separator: made of stainless steel -Inlet opening: Ø 110 mm Nedpfxjytgrxs Akielh -Outlet opening: pneumatic shut-off valve Ø 300 mm -Dimensions: 1730/1730/H5500 mm -Quantity: 2 pieces available Price: per piece -Transport dimensions: 4 loading meters, height 1730 mm -Weight: 1120 kg

Condition: new, Bernardo Motorized Sheet Metal Shear MTA 2060 x 3 mm NCC Cutting length 2060 mm Max. sheet thickness * 3 mm Cutting angle 1° 30’ Strokes/min 31 Working height 810 mm Rear stop 0 – 750 mm Table width 390 mm Motor power 4.0 kW Width 2600 mm Depth 2100 mm Height 1260 mm Weight approx. 1710 kg * Material strength 400 N/mm² Features Equipped as standard with a sheet metal holding device, ideal for thin sheets Support arms on the front for easy processing of large sheets Motorized rear stop, precise adjustment via ball screws Clearly designed control panel with integrated control Robust steel sheet metal construction for vibration-free operation Support table with a right-angled stop on both sides High operator safety thanks to a protective cover and photocells on the rear of the machine 2-blade cutting knives made of high-quality steel guarantee clean and burr-free cutting Automatically acting clamping device for fixing the sheet Nodpfxjd Hxnho Akijlh Scope of supply Cutting line illumination Motorized NC rear stop Front sheet supports Side stops Protective plate with photocells NC control BRL 401.2 Pneumatic sheet metal holding device Foot pedal with emergency stop Knives made of tool steel

Condition: new, Bernardo Dual-Column Bandsaw MBS 300 DG-V PRO Technical Specifications Nledpfx Aked Hzbwoijh Cutting capacity, round / square 90° 255 mm / 210 x 210 mm Cutting capacity, flat 90° 310 x 210 mm Cutting capacity, round / square 45° R 220 mm / 210 x 210 mm Cutting capacity, flat 45° R 220 x 200 mm Cutting capacity, round / square 45° L 230 mm / 200 x 200 mm Cutting capacity, flat 45° L 230 x 200 mm Cutting capacity, round / square 60° R 135 mm / 135 x 135 mm Cutting capacity, flat 60° R 135 x 135 mm Working height 930 mm Saw band dimensions 2750 x 27 x 0.9 mm Cutting speeds, infinitely variable 20 – 80 m/min Coolant pump 100 W Motor output power S1 100% 1.5 kW Motor input power S6 40% 2.2 kW Voltage 400 V Machine dimensions (L x W x H) 2000 x 1250 x 1900 mm Weight approx. 350 kg Scope of supply • Saw band • Workpiece stop • Base frame • Manometer for band tension • Saw band guide with carbide inserts • Quick-release vice • Coolant system • Hydraulic lowering cylinder • Motor protection switch • Automatic end-of-cut shut-off

Condition: good (used), Year of construction: 2004, functionality: fully functional, power: 11 kW (14.96 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, intake manifold diameter: 350 mm, year of last overhaul: 2020, Equipment: CE marking, documentation/manual, Schuko Intermediate Filter System “Eco Var 04” Professional dust extraction system Schuko Eco-Var 04 (year of manufacture 2004) – complete system including piping, control system, and emission permit. For sale is a powerful and fully functional industrial dust extraction system from the premium manufacturer Schuko, type Eco Var 04 (year of manufacture 2004). The system is ideally suited for woodworking companies for efficient extraction of chips and dust and is offered including an extensive pipe and control system infrastructure. Technical data & equipment • Manufacturer: Schuko • Model series: Eco Var 04 (intermediate filter system) • Year of manufacture: 2004 • Drive power: approx. 11 kW (powerful, efficient fan) • Discharge: Rotary valve airlock with 5 sealing lips (ensures safe, pressure-loss-free material discharge into containers, silos, or briquetting presses) Extensive accessories & infrastructure (included) • Pneumatic valves: approx. 20 units for automatic shut-off of individual machine connections. Nsdpfx Akszddwgsislh • Pipe & hose system: approx. 80 meters of robust extraction pipe including the corresponding flexible hoses. • Pneumatic infrastructure: compressed air connections including all associated pneumatic hoses for valve control. Product advantages & condition • Complete package: No tedious searching for individual parts – from the filter system to the piping and the complete control and pneumatic system, everything is available for workshop installation. • Robust industrial quality: The Eco-Var series from Schuko is known for its durability, high filter area, and reliability in daily workshop use. • Energy-efficient: Thanks to the approx. 20 pneumatic valves, the extraction performance is only provided where work is currently being carried out, which saves a lot of energy. Note for buyers: The system is in a well-maintained and fully functional condition, appropriate for its age. Inspection can be arranged.

Condition: ready for operation (used), Year of construction: 2016, Felder clean air extraction unit | Dust extraction system RL 200 | Ø 200 mm Maximum flow rate: 4000 m³/h Nominal flow rate: 20 m/sec, 2300 m³/h Valve pressure: 2380 Pa Filter area: 20 m² Extraction connection diameter: 200 mm Residual dust content: < 0.1 mg/m³ Felder Briquetting Press FBP 50 Briquette diameter: 50 mm Throughput: 30–50 kg/h Motor power: 4 kW Njdpfx Aewa Rlkokiolh Dimensions (L x W): 1750 x 1270 mm Weight: 950 kg Hydraulic oil capacity: 125 liters Year of manufacture: 2016 Condition: Ready for use Price: €15,500 The system has already been dismantled and is stored in the Raasdorf warehouse.

Condition: new, Bernardo Vario Pillar Drill SB 40 Profi Technical Specifications Drilling capacity max. 40 mm Drill chuck 1 – 16 mm / B 18 Morse taper MK 4 Spindle speed, stepless 90 – 1455 rpm Overhang 320 mm Drill table swiveling -50° to +50° Distance spindle / table max. 590 mm Distance spindle / base plate 1155 mm Quill stroke 160 mm Quill feed 0.1 / 0.2 / 0.3 mm/rev Column diameter 120 mm Table size / T-slot size 505 x 425 mm / 14 mm Base plate working area 360 x 370 mm Motor power 1.0 / 1.5 kW Machine dimensions (W x D x H) 500 x 930 x 1870 mm Weight approx. 380 kg Features Vario drive for precise speed adjustment Quill feed can be done manually or via mechanical feed Easy tool change due to automatic tool ejector Set speed can be quickly and easily read via digital display Solid, swiveling gray cast iron table with T-slots and coolant channel Coolant system and lighting included Adjustable drilling depth stop, drilling depth can be read via scale Right-hand/left-hand rotation for thread cutting Njdpod Hxk Nefx Akijlh Scope of supply Drill chuck arbor MK 4 / B 18 Coolant system Digital speed display Quick-change drill chuck 1 – 16 mm / B 18 Reducing sleeve MK 4 / 3, MK 4 / 2, MK 3 / 1 LED machine light Automatic tool ejector Height-adjustable protective shield

Condition: excellent (used), Year of construction: 2014, machine/vehicle number: AH/117989, Usable working area: X-axis = 3,086 mm Y-axis = 2,155 mm Z-axis = 100 mm Work table: Gridded table with a phenol resin base, grid spacing 30 x 30 mm Multi-zone vacuum system WORKING UNITS: Drilling unit Vertical spindle in X: 5 Vertical spindle in Y: 2 Additional unit (ATEMAG) Motor power: 2.2 kW Milling spindle: 6.6 kW electric spindle HSK-F63 tool holder Tool changer: Linear tool magazine 13 tool positions Becker pump: 2 x 250 m³/h Control: PC-based BUSellato/SCM control system Handheld control unit WAVE CAD/CAM software (depending on configuration) Machine dimensions: L = 5120 x W = 3420 x H = 2120 mm Weight: 3400 kg Nledpfxezy Euqo Akish