EDGE BANDER - NEW EDGE BANDER

SCM OLIMPIC K 360 T-ER1

Condition: used, Year of construction: 1992, Max. cutting width: 5300 mm Max. cutting height: 2200 mm Saw blade diameter: 300 mm Max. processing thickness: 80 mm Saw blade bore: 30 mm Bottom support: Fixed rollers Saw head pivoting: Manual Saw feed: Automatic Extraction: External extraction Approx. weight: 1500 kg Motor power: 5.5 kW Storage location: Nattheim Ksdpevvkq Tjfx Aaljww

Condition: new, Year of construction: 2026, Max. edge thickness 3 mm (optionally up to 8 mm) Min/Max. work piece thickness 8–60 mm* Min. workpiece length approx. 200 mm* Min. workpiece width approx. 80 mm* Feed speed approx. 10 m/min. Ready to operate approx. 6 min. Power consumption max. approx. 14 kW Electrical connection 400 V – 3 Ph – 50 Hz Machine dimensions 5,250 x 1,230 x 1,430 mm (LxWxH) Weight approx. 1,700 kg pre-milling head Whispercut radius for corner rounder R = 2mm heatable infeed fence quick change device f.motor corner rounder change motor for corner rounding unit including HM profile cutter radius for change motor R = 1mm Radius Multi-Radiusscraper R2/R1 wheels release agent spraying unit cleaning agent spraying unit protection spraying edge nesting pneumatic 3-point adjustment Kedpfx Ajg Tu Rkjaleww

Condition: good (used), BRANDT highflex 1440 edgebanding machine well equipped, possibility to check before buying pre-cutters application of glue pneumatic pre-application guillotine pressure rollers pre-cutting balls top and bottom pre-milling unit 2 x earning-multifilling unit profile cyclin flat cyclin polisher machine has nc cutter control and pneumatic package max workpiece height 60mm max thickness of veneer in a roll 3mm feed rate max 14m/min Kwodet Hxxpspfx Aalow Machine well maintained in very good condition

Condition: new, SCM Olimpic 500 HT - Automatic Edge Banding Machine New machine with warranty. - Olimpic 500 - "HP T-ER2" version - "eye-S" control panel Kwodewkf Ihopfx Aalew - "Maestro active edge" human-machine interface (HMI) software - Fine milling and radius scraping unit, radius = 1 mm - Fine milling and radius scraping unit, radius = 2 mm - Electronic positioning of the upper pressure beam - Spacer on the infeed guide - "SAVENERGY" kit - Interior lighting of the booth and gluing area - Nesting rollers - Release agent spray unit "AAR" 1 - Sprayer for finishing the edge - Sprayer for delicate edges - "RT-V1" jointing unit - "EASY SIZE" device - "VC-VM" gluing unit - Ceramic lamp with infrared rays - Electronic positioning of the pressure rollers - "K-2 Radius" trimming unit - Chamfering and Radius milling unit "R-HP Multiedge 2R" - Rounding unit "Round 2-A Multiedge 1R" - MULTIEDGE kit with 3 automatic positions straight/R/R, for "Round 2-A" - Radius scraper unit "RAS-HP Multiedge 2R" - Flat scraper "RC-N" - Buffing unit "SP-V" Machine is new and still in original packaging. Promotional machine at a special price.

Condition: new, The ALTENDORF F 25 offers everything in a small space, what a sliding table saw must be able to do. Whether in the first own workshop, for daily use, in industrial production industrial production or as a powerful second machine. - The F 25 is the space-saving all-rounder that simply makes you simply makes you more productive. Materials such as wood panel materials, solid wood, wood-like materials or extruded or extruded profiles can be cut with the best precision, easy handling and outstanding cutting quality Kwodju R S Hcopfx Aalow can be easily processed. The one-sided swivel saw blade also enables angled cuts. The smooth-running double roller carriage based on the Altendorf as well as the digital display of the height and tilt are standard features. A machine for beginners and professionals alike. Double roller carriage, tiltable, man. Height and swivel adjustment, Rip fence with man. Fine adjustment, angle mitre fence, Preparation for retrofitting, of a scoring unit ----- Technical data ----- Swivel range: 0 - 46 °, carriage length: 3,200 mm, Cutting width: 1,000 mm, Cutting height: 100 mm, max. saw blade Ø: 315 mm, max. saw blade projection: 104 mm, Non CE version: max. saw blade Ø: 350 mm, max. saw blade projection: 121.5 mm, Crosscut fence extendable up to: 3,450 mm, speeds: 4,200 rpm, Motor power: 4.4 kW, 5.5 HP, work table height: 880 mm - large extraction hood is optional - - new exhibition machine -

Condition: new, ALTENDORF F 35 Type 1 - 1000 Panel Saw Robust, powerful, high cutting height – ideal for solid wood! - New machine - available immediately - Motor power: 7.5 kW, 400 V, 50 Hz, 3 speeds Motorized height and tilt adjustment Large protective hood Double roller carriage 3,200 mm Scoring unit preparation Kwedpfxjxtbtps Aaljw Rip fence, cutting width 1,000 mm Angle and mitre fence 3,450 mm, without longitudinal compensation Table extension/widening: powder-coated surface Saw blade tilt: 0 - 46° Carriage length: 3,200 mm Cutting length: 3,100 mm Cutting width: 1,000 mm Cutting height: 154 mm Max. saw blade Ø: 450 mm Screen size: 15 inches Working table height: 910 mm Extraction port Ø: 80 + 120 mm Including options: M45102 Rip fence 1000 mm Digit_X M64300 Front support roller M99008 Template holder

Condition: new, volume flow: 0.984 m³/h, Atlas Copco G7FF 500 lt screw compressor NEW Specification: • condition - new • manufacturer - Atlas Copco • capacity - 984 l/min Kwjdpfx Aohkttpsaljw • main engine power - 7.5 kW • tank - 500 l • maximum operating pressure - 10.0 atm • built-in refrigerant dryer • electronic setting of compressor operating parameters • soundproof cabin (only 67 dB) • meets CE standards • user manual in Polish • weight - 227 kg Additional information: • possibility of obtaining a manufacturer's warranty after start-up by an authorized Atlas Copco service • available within 7 working days

Condition: new, Year of construction: 2024, functionality: fully functional, power: 5 kW (6.80 HP), cutting height (max.): 200 mm, cutting width (max.): 1,300 mm, saw blade diameter: 550 mm, cutting length (max.): 3,200 mm, cutting width at rip fence: 1,300 mm, sliding table length: 3,200 mm, Exhibition machine F 45 Elmo Drive - Swivel + / - 45 ° - Cutting height 200 mm - Preparation for scoring unit no. M24038 - Double roller carriage with 3200 mm - Angular mitre fence 3200 mm Digit L - CNC rip fence 1300 mm - Duplex mitre fence 1350 mm manual - Template holder - On/Off switch on the double roller carriage Kwsdsuh R R Eepfx Aaljw - Front support roller

Condition: excellent (used), FULL LINE of 4 Side Sizing-Milling & Edge Banding (also SOFTFORMING), through-feed drilling and splitting of panels. Complete with fast automatic handling. Composed of the following machines: A) Loader (Bridge-Frame) "RBO (BIESSE)" Mod. Winner C (1) B) 1st Double-side Sizing & Edge Bander "BIESSE" Mod. Stream SB1 11.0 Softforming C) 1st 90° Turning device (Lengthwise to Crosswise) "RBO (BIESSE)" Mod. GPK-1 D) 2nd Double-side Sizing & Edge Bander "BIESSE" Mod. Stream SB 2 9.5 E) 2nd 90° Turning device "RBO (BIESSE)" Mod. GPK-2 (straight or Crosswise to Lengthwise) Kwedpfx Asttgy Healsw F) Multi-Borer with CN "BIESSE" Mod. Techno FDT CN (with 2 horizontal working units, 6 vertical bottom working units and 3 vertical top working units) G) Multi-Borer with CN "BIESSE" Mod. Techno FDT CN (with 2 horizontal working units, 6 vertical bottom working units and 3 vertical top working units) H) 3rd 90° Turning device "RBO (BIESSE)" Mod. GPK-3 (straight or Crosswise to Lengthwise) I) Splitting Saw (Splitter) Lengthwise "GM (for BIESSE)" Mod. Split 4-84 LT L) Stacker (Bridge-Frame) "RBO (BIESSE)" Mod. Winner SC (2)

Condition: new, Year of construction: 2024, Martin T 45 thickness planer with Tersa cutterblock The T45 thicknessing machine offers ideal conditions for modern production: It delivers cleanly planed surfaces, is quick and easy to operate and works extremely quietly. and works extremely quietly. The standard electronic control system makes Thanks to 99 storable planing dimensions, setting the planing height is so easy that even the the first workpiece fits perfectly. Of course, the thicknessing table can also be moved at the simple press of a button, or can be incremented by 0.1 mm. upwards. The switching elements of the feed control are also within easy reach. reach. The heavy, vibration-damping composite stand with the high-quality the high-quality bearing-mounted planing shaft guarantees excellent surfaces. Thanks to the sound-insulating construction, you can work quietly even in the standard version. - Planing width: 630 mm - Weight: approx. 1,200 - 1,400 kg - Planing height: 2.8 - 300 mm Kedpsqlckpjfx Aaljww - Table length: 1,260 mm - Workpiece length min.: 270 mm - Speed: 5,000 rpm - Operation: 1-axis control for planing dimension, max. 99 values can be stored, 49 of which can be used for a freely programmable planing sequence; button for manual quick and fine adjustment of planing thickness according to digital display, push button for cutterblock start and stop, integrated operating hours counter - Cutterblock: TERSA solid steel cutterblock Z4 Ø 125 mm; incl. blocking for easy cutter change - Thicknessing table: Electric thicknessing table adjustment with fine adjustment, travel speed 10 mm/s, mounted on 4 support spindles to prevent tilting, finely planed table surface - Feed: 2 speeds 6 / 12 m/min, can also be selected electrically during planing, large rubber feed rollers Ø 85 mm to compensate for different thicknesses of wood, rubber rollers are gentle on the material and self-cleaning, easy roller change; link pressure beam at infeed - Suction system: Swivel-up, split hood with chip extraction nozzle Ø 160 mm, can be connected optionally on the left / right (in special cases on both sides); minimum extraction air volume: 27 m³/min. at 20 m/s - Maintenance device: Central lubrication strip for oil lubrication points; bearing / cutter shaft lubrication via nipple - Accessories: 1 grease gun, filled with long-life grease 1 oil gun 1 open-end wrench 1 tool for blade change 1 pair of blind knives 640 mm 2 pairs of TERSA reversible knives 640 mm CV - Emission values: Emission sound pressure level at the workplace LpA according to DIN EN ISO 11202 [dB(A)] Idle noise (without extraction) P1 65 Idle noise (w. extraction) P1 77 Operating noise (without extraction) P2 65 Operating noise (with extraction) P2 78 Sound power level LWA according to DIN EN ISO 3746 [dB(A)] Idle noise (without extraction) 84 Operating noise (with extraction) 90 Dust emission Low dust emission according to DGUV 209-044 / BGI 739-1 Location: ex stock 54634 Bitburg - immediately available -