Band saw

Bernardo MBS 300 DG-V PRO

Condition: new, Year of construction: 2024, functionality: fully functional, overall weight: 330 kg, fuel type: diesel, tank capacity: 34 l, color: black, output current: 65 A, output voltage: 230 V, output frequency: 50 Hz, nominal power: 12 kW (16.32 HP), continuous power: 10 kW (13.60 HP), total length: 930 mm, total width: 660 mm, total height: 900 mm, rotational speed (max.): 3,000 rpm, type of cooling: water, Proton 12000 230V Oasis gensets work well wherever peace and quiet are valued. This is a genset for demanding conditions of use. In addition to silence and high power, the genset is water-cooled which ensures round-the-clock operation. ABBREVIATION: Genset type: Single-phase Fuel type: Diesel Liquid-cooled: Yes Voltage: 230 V Rated power: 230V - 10,000 watts (12.5kVA) Maximum power up to 15 minutes - 12,000 watts (15 kVA) WEIGHT: Gross weight: 330kg FUELING: 2.2 liters per hour (at 70% of maximum power) 1.8 liters per hour (at 40% of maximum power) TECHNICAL DATA: Prepared for operation - Yes Type - Portable Year of manufacture - 2024 Condition of the unit - Factory new Manufacturer - Proton Warranty - 24 months Efficiency cos Φ - 0.8 ENGINE: Engine model - Proton 2V8-W Fuel type - Diesel (Diesel) Engine type - High-pressure, 4-stroke Number of cylinders - 2 Direct injection - Yes Type of cooling - Liquid (The unit has a radiator) Displacement - 998 cc3 Number of revolutions per minute (RPM) - 3000 Permissible maximum operating time (1 cycle) - 24 hours Cooling time (after 1 cycle) - 60 minutes Oil pressure sensor - Yes Oil condition sensor - Yes Type of valve train - Gear-driven valve train Engine speed controller - Mechanical Lubrication method - Forced, engine with oil pump Starter - 1100W Oil sump capacity - 2.5l Recommended oil - TITAN CARGO MC 10W40 (semi-synthetic for diesel). Valve type - Electromagnetic, controlled by a single solenoid GENERATOR: Generator model - Proton 220-CAVR-D Rated current (230V) - 65 A Voltage - 230V Frequency - 50 Hz Construction of the alternator - Synchronous Degree of protection (of the alternator) - IP 23 CABINET: Housing type - Enclosed - Silenced Ability to discharge exhaust fumes outside the facility - Yes Sound pressure level LPA - 73dB (measurement - 5m, open space) Fuel tank capacity - 34 liters Operating time on a full tank (Average) - 12 hours SOCKETS: Number of three-phase outlets - none Number of single-phase outlets - 1 piece (32A), 1 piece (16A) Number of other outlets - none DIMENSIONS: Diameter of wheels - 10 cm Width - 66 cm Length - 93 cm Height - 90 cm FEATURES: DualPower™ technology - Yes Automatic start (ATS) - Yes - adapted Voltage stabilizer (AVR) - Yes - built-in Remote control - No Starting type - Electric Glow plugs - Yes Fuel level indicator - Yes Voltmeter - Yes Ammeter - Yes Current protection - 1xC39 (for 230V) Hour meter - Yes Battery - 45 Ah TRANSPORT KIT: Yes - Small wheels Yes - Handrails on two sides Yes - Swivel wheels Yes - Wheels with mechanical lock RICH EQUIPMENT See below what else the kit includes: Giedpfxstqffcs Acwjr - Battery - Air filter - Oil filter - Fuel filter - Keys for current service - Plugs Why our company? We are a company specializing exclusively in generators, for more than 17 years we have been in this business constantly striving to make our products represent the highest quality and most reliable. We have a wide range of generators from 6 to 300kW on a variety of engines including English Ricardo, American Cummins or German Deutz and in various configurations made specifically for customer requirements.

Condition: new, messurements (LxWxH): 1.630 x 700 x 1.200weight approx.: 480total power requirements: 1,1prebending: 2sheet thickness: 3sheet length: 1050 Gijdpfx Acod Eqqqjwsr

Condition: new, Bernardo horizontal bandsaw HBS 275-400 V Technical specifications Cutting capacity round 90 ° and 225 mm Cutting capacity 90 ° 200 x 200 mm square Section flat 90 ° 245 x 150 mm Cutting area around 45° 160 mm Section square 45 ° 160 x 160 mm Cutting area around 60 ° 100 mm Cutting range, square 60 ° 100 x 100 mm Working height 910 mm Band saw blade dimensions 2480 x 27 x 0,9 mm Cutting speeds of 400 V 45 / 90 m / min Coolant pump S1 100% 100 W S1 motor power output 100% 1,1 kW Motor power S6 40% 1,5 kW Voltage 400 V Machine dimensions (L x D x H) 1430 x 720 x 1700 mm Weight approx. 190 kg Scope of delivery • Band saw blade • Workpiece stop • Base • Belt tension gauge • Vise with quick locking • Coolant system Gisdpfxjd Du T Ie Acwjr • Hydraulic lowering cylinder • Motor protection switch • Automatic shut-off

Condition: new, Precision control and lathe Make: OPTiturn Model: TH 4210 Item No.: 3462050 Condition: new machine Tip height: 210 mm Top width: 1,000 mm equipped as standard with: -Machine base -Quad steel holder -Light machine -Reducing bushing MK 6 / MK 4 -2 fixed centres MK 4 -Fixed bezel, 15-105 mm -Bezel running with 10-65 mm -Chuck guard, electrically protected -Coolant system -Change gears set Giodedbgxcepfx Acwsr -Oil -Control tool -Manual

Condition: like new (used), Year of construction: 2005, functionality: fully functional, turning length: 450 mm, spindle speed (min.): 25 rpm, spindle speed (max.): 6,000 rpm, travel distance X-axis: 213 mm, travel distance Z-axis: 450 mm, rapid traverse X-axis: 24 m/min, rapid traverse Z-axis: 30 m/min, bar passage: 65 mm, Siemens 840 D CNC Working area Gisdpsw Adhwefx Acwjr Max. swing diameter on bed 505 mm Swing diameter on X-slide 375 mm Chuck diameter 210 mm Bar capacity 65 mm Transverse travel (X) 213 mm Longitudinal travel (Z) 450 mm Feed rates X/Z-axis rapid traverse 24/30 m/min Main spindle Spindle nose (flat flange) 140 h 5 mm Internal diameter of front bearing 100 mm Spindle motor power (40/100% DC) 16/12 kW Torque (40/100% DC) 153/115 Nm Spindle speed 25 - 6.000 rpm Tool turret Number of tool stations 12 Of which motorized 12 Shank diameter (according to DIN 69880) 30 mm Motor power (40% DC) 9 kW Maximum torque (40% DC) 20 Nm Maximum speed 4.500 min-1 Tailstock Tailstock stroke, automatic 450 mm Center point attachment 4 CM Tailstock thrust, max 400 daN Machine equipment: • Chip conveyor • Provision for fume extractor • 2 axial motorized modules • 4 radial motorized modules • Fixed tool holders

Year of construction: 2017, condition: like new (used), used RENNER REKO 550 / 50VE compressed air compressor 10 bar with petrol engine for use without power connection (for example emergency service vehicles of breakdown service or Tire service) The compressor is used, built in 2017 and has 50 operating hours. The gasoline-powered, robust reciprocating compressors not only offer you the usual advantages of the RENNER systems, but also flexibly available compressed air on construction sites, in service vehicles and in many other applications "without power outlets". They guarantee a constant compressed air supply regardless of location. The small version is mobile and quickly offset by the ergonomic handle. Thanks to its compact design, the large version can be easily moved with pallet trucks or forklift trucks and loaded onto vehicles. VE = electric start. Please note: will be delivered without battery Gedpod H Dr Ssfx Acwjir Technical specifications: Suction capacity 550 l / min Eff. Delivery quantity 400 l / min Gasoline engine 3.6 kW Honda power unit with 4.8 hp Max. Pressure 10 bar Cylinders / stages 2/1 Speed ​​1400 rpm Sound level 98 dB (A) Compressed air tank 50 l Dimension L x W x H 810 x 460 x 830 Weight 70 kg Visit our shop in Erlangen. We have a large selection of new and used compressors.

Condition: new, Year of construction: 2025, New machine. Please ask for current price and delivery time. Dimensions and weights: Length (product): approx.2129mm Width/depth (product): approx.1046mm Height (product): approx.1687mm Weight (net): approx.645kg Electrical data: Power drive motor: 3kW Supply voltage: 400V Mains frequency: 50Hz Hydraulic pump motor power: 1.4kW Motor power coolant pump: 100W Total connected load: 3.8kW Machine data: Saw blade speed(s): 20 - 80m/min Saw blade length: 3770mm Saw blade width: 34mm Saw blade thickness: 1.1mm Cutting angle: -45 - 60° Manual operation: hydraulic via push button Semi-automatic operation: automatic Godpfx Asrah S Hscweir Cutting ranges: Cutting range 0° round (solid material): 355mm Cutting range 0° square (solid material): 300mm Cutting range 0° rectangular upright (solid material): 300 x 490mm Cutting range -45° round (solid material): 290mm Cutting range -45° square (solid material): 250mm Cutting range -45° rectangular upright (solid material): 250 x 250mm Cutting range +45° round (solid material): 350mm Cutting range +45° square (solid material): 290mm Cutting range +45° rectangular upright (solid material): 290 x 340mm Cutting range +60° round (solid material): 230mm Cutting range +60° square (solid material): 180mm Cutting range +60° rectangular upright (solid material): 180 x 220mm

Condition: new, Year of construction: 2023, arm reach: 1,400 mm, load capacity: 6 kg, New welding robot TIG OKIO AB6-C1400 -Country of origin: China -Type: AB6-C1400 -Number of axes: 6 -Reach: 1400 mm -Maximum payload: 6 kg -Control cabinet -Remote control Giodpfx Acsqnt N Dswjr -Wire feeder -Welding source: TIG WSM400R -Cooler

Year of construction: 2012, condition: excellent (used), machine/vehicle number: MBHF-KBK1, DEMAG KBK crane sky crane track dimensions approx. 12m x 3.5m Please inquire about other dimensions! Payload / lifting load 125 KG - 0.125ton Technical data of the system: Gjdpfspiarnsx Acwoir Crane track made from Demag KBK1 rails The system is delivered complete: KBK rails, rail connectors, chassis, end plates, cable drag, power supply, holders/suspenders etc. including 1 bridge with 125KG Demag DC-COM chain hoist Crane is dismantled and available immediately Very good used condition, see pictures Item location is 75053 Gondelsheim Shipping by courier or collection only by appointment Demag KBK1 KBK2 and KBK3 rails are stock items! Other KBK systems are also available. Payload 125KG - 1600KG Please ask for your crane runway with cantilever capacity and dimensions.

Condition: new, Year of construction: 2026, Mini Crawler Crane TB5000 A mini crane on a crawler chassis designed for indoor and outdoor work. Maximum lifting capacity: 2400 kg. * radio control of the device - driving, working, spreading the feet * double power supply of the crane - diesel and electric 230 V * maximum lifting capacity - 2400 kg * anti-overload system as standard * maximum horizontal reach over 11 m * four hydraulic extensions + 1 manual extension * maximum vertical reach over 13 m * 4 hydraulically lowered supports * weight approx. 2200 kg * height approx. 195 cm * width approx. 88 cm * active arm 16 degrees Additional, optional equipment: * search hook * hydraulic winch 990 kg * Li-ion battery power supply Gisdsibqraspfx Acwsr * pads for support feet * hydraulic FLY JIB Available in the selected color.