Manual Powder Coating Spraygun
PROTON PC200

Name: PROTON PC200
Brand: PROTON
Price: 1750 EUR
Availability: InStock

EXW Fixed price plus VAT

€1,750

Condition

New

Location

Luckenwalde Germany

Manual Powder Coating Spraygun PROTON PC200

Show map

Machine data

Machine type:: Manual Powder Coating Spraygun

Manufacturer:: PROTON

Model:: PC200

Condition:: new

Price & Location

EXW Fixed price plus VAT

€1,750

Location:: Anhaltstraße 30, 14943 Luckenwalde, Deutschland

Call

Details about the offer

Listing ID:: A3128430

Update:: 14.12.2024

Description

⭐⭐⭐⭐⭐ (5.0)
⚡️ Top service ⚡️ Fast delivery ⚡️ Great support!

✅✅✅Energy class A+++✅✅✅

€1750 EX. VAT
(transport costs on request)
►►Buy It Now◄◄

This product is only sold outside Europe.

➖➖➖➖➖
►►►⌛⏰ FASTEST delivery time❗ ⌛⏰►►►

✨✨Buy directly from the manufacturer and secure the price and quality advantage!✨✨

Benefit from Proton's 40 years of experience in surface coating technologies.
➖➖➖➖➖

☘️Eco-Friendly☘️⚡️Green Energy⚡️☘️

✨Sprays all powders with ease, coats complex geometries with outstanding efficiency and quality, and gets it done in the toughest of environments.
This paint gun set is designed with stronger and more stable structure.

✨Works with any powder:
Today you are faced with the challenge of spraying a wide variety of paints and chemicals. PROTON CLASSIC gives you the power and control you need to get the best possible finish from any powder.

✨Optimal ergonomics:
The lightweight, ergonomically designed gun offers better balance and feel in hand, allowing you to position it comfortably for better coverage and faster coating.

✨Regardless of the conditions:
No matter where you are, you will be new to the Coat PROTON CLASSIC perfectly. Whether in the heat or cold, PROTON CLASSIC delivers under dry or damp conditions excellent functionality and performance for any required coating environment.

✨These devices can take a beating...
Industrial pistol design from a single source, Die-cast pump and carriage in steel construction ensure unparalleled toughness and durability in each withstand the coating environment.

All equipment is new, not used.

Do you want a special configuration ❗ Call us now❗

✅WE OFFER SPECIAL SOLUTIONS, NOT JUST STANDARD SIZES.✅
✅WE DESIGN, PRODUCE AND INSTALL SPECIALLY FOR YOU.✅

☀️ 2 YEAR WARRANTY ☀️

*This product is only sold outside Europe.
Bodpfxjc Utdrj Akaodb

Documents

3128430-01.pdf
3128430-02.pdf

Seller

Registered since: 2017

45 listings online

Call

Send inquiry

Telephone & Fax

+49 3371 ... show

These listings may also fit your interest.

Listing

Double Girder Gantry Crane HILGERS / TEICHMANN

Essen

1,051 km

Double Girder Gantry Crane
HILGERS / TEICHMANN

Year of construction: 2000, condition: excellent (used), Span approx. 20,0 m Lifting height approx. 8,0 m Make/reconstruction HILGERS/TEICHMANN Modification/New construction 2000/2021 Crane equipped with: - Double-rail trolley with 4-corner rope outlet - Magnet System prepared Bodpfx Aeqfc Egjkajdb - Radio remote control - Optionally with magnetic traverse or spreader

See details

Listing

Hall construction Halle zur Vermietung Produktions- und Montagehalle 850m²

Dautphetal

1,179 km

Hall construction
Halle zur VermietungProduktions- und Montagehalle 850m²

Call

Condition: good (used), Year of construction: 2012, Exposé for Hall Rental Production and assembly hall ready for occupancy Fully equipped - 850 m² - Compressor system available - 40.0 t overhead crane (2 x 20 t rotating cranes) - 10.0 t overhead crane Bdodpfeygkinex Akajb - 5.0 t gantry crane - 20.0 t overhead crane - 12.5 t overhead crane - Millutensil MIL303 spotting press - Crane hook height: 7 m - Truck entrance gate height: 4.5 x 5 meters - Workshop trolley with tools and lifting gear available - Foreman’s office and meeting room with air conditioning - Ladies and gents restroom - Lathe and grinding machine available - Fiber optic connection available (contract with Telekom possible) Available for immediate rent Location: 35232 Dautphetal, Industriestr. 9 Viewings by appointment possible

See details

Listing

MITRE SAW model OMGA T 50 350 OMGA T50 350

Mariano Comense

1,518 km

MITRE SAW model OMGA T 50 350
OMGAT50 350

Call

Condition: like new (used), functionality: fully functional, MITRE SAW , orientable +/-45° model OMGA T50 350 with dust aspirator second hand machine working conditions : Excellent CE regulation : Yes with extractor cabinet ( dust aspirator ) with flat diagram extensions Technical data : volt. 380/50 engine power Hp 3 ( kw 2,2) Bjdpfjm Ak Elsx Akaodb blade diameter mm. 350 with 90° blade : max height cut mm. 110 width max. cut mm. 130 with 45° blade : max. height cut mm. 110 max. width cut mm. 92 machine weight kg. 90 extractor cabinet weight kg. 50

See details

Listing

Đakovo

2,117 km

Hot Forming Line
HMC

Call

Year of construction: 1986, condition: good (used), Technical Details : Products - - Flats - 10x3 - 25x3 mm 10x4 - 25x4 mm 12x5 - 20x5 mm - Square - 6x6 - 12x12 mm - (T) Profile - 20x10x3 mm Bdjdpfxsd H Ur Ao Akasb - ( L) Profile - 15x15x3 - 18x18x3 mm Raw Material wire - 8,9,10,11,12,13,14,16 mm Transformer Power - 20 Kw Speed - 35m/min

See details

Listing

Aurach

1,373 km

Center lathe
WeilerPrimus VC

Call

Condition: excellent (used), Weiler Primus VC Precision Centre Lathe Equipped with 3-axis HEIDENHAIN digital readout (latest generation) With VC drive for stepless speed adjustment and CE-compliant, in virtually as-new geometric condition Technical Data: Year of manufacture: 1999 Machine No. 208 Centre height: 140 mm Centre distance: 500 mm Swing over bed: 280 mm Swing over cross slide: 135 mm Spindle speeds: up to 4,000 rpm, stepless Main drive: approx. 4 kW Spindle bore: 40 mm Short taper spindle nose DIN 55027 size 5 with bayonet locking Tailstock: MT 3 Quill stroke: 40 mm Longitudinal feed: 0.02 to 0.63 mm/rev Cross feed: 0.005 to 0.2 mm/rev Metric thread pitches: 0.25 to 8 mm Bdodpeyglk Hsfx Akaeb Module pitches: 0.2 – 4 mm (19 pitches) Weight: approx. 800 kg Machine dimensions (W x D x H): 1.4 m x 0.935 m x 1.55 m Accessories and Equipment: - 3-Axis HEIDENHAIN digital readout (latest generation) - Display for spindle speed - 140 mm 3-jaw chuck with reversible jaws - Multifix quick-change tool post, size “A” - Electrically interlocked safety chip guard - Covered leadscrew and feed shaft - Lockable tool compartment - Rear splash guard - Simple bed stop - Switchable spindle brake - Operating manual - Machine lamp The machine comes from a vocational school and is in exceptionally top condition. Thanks to its safety features and renowned WEILER precision, this lathe is ideal for training as well as tool and machine construction. Note to all private buyers: The price of the machine is well into the five-digit range.

See details

Listing

Centerless Belt grinding tube finishing Löser RP-S 371

Dietzenbach

1,231 km

Centerless Belt grinding tube finishing
LöserRP-S 371

Call

Condition: refurbished (used), functionality: fully functional, Löser centerless tube grinding machine - belt grinding machine - polishing machine - Cylindrical grinding machine Centerless tube grinding / polishing machine for workpieces with a minimum length of 1100mm. The machine was built in 1988 and was completely overhauled in 2012. The machine was converted for polishing and then only polished around 10,000 parts. The machine was no longer used after that. During the general overhaul, the motors, bearings and the entire control cabinet with the frequency converters were completely replaced. The machine can be used for both wet grinding and polishing. Wastewater treatment including pumps is not yet available. We can retrofit these for you free of charge according to customer requirements. The transport systems (roller conveyors) between the grinding stations must also be retrofitted to suit your workpieces. The machine can process pipe diameters from 10mm to 160mm. The grinding motors / polishing motors have an output of 7,5kW per station. Bdedpopugwiofx Akaeb The system can be viewed by appointment in our warehouse in D-63128 Dietzenbach.

See details

Listing

Sheet metal folder,bender,bending machin PROD-MASZ Abkantbank Biegemaschine Profi Abkantbank RED-2m/0.8 +Aussparung

Nürnberg

1,407 km

Sheet metal folder,bender,bending machin
PROD-MASZ Abkantbank BiegemaschineProfi Abkantbank RED-2m/0.8 +Aussparung

€2,200

Fixed price VAT not applicable

Call

Condition: new, Year of construction: 2026, We offer you a wide range of sheet metal bending machines and guillotine shears. What you can expect from us: fast and safe delivery without complications; competent advice and service during and after the guarantee. Promised. Advice, delivery or maintenance? It's a pleasure. For individual machines or entire packages? No problem. We know all of our devices inside and out. For years. And as a manufacturer, we are always up to date. We look forward to you. Folding bench RED-2200 / 0.8 including transport rollers Bending machine folding bench with side cutouts for bending from top to bottom. Thanks to him, you will finish your windowsill. In the machine construction there is a space for curved machining at a height of 6 cm up and down. It is a modern sheet metal bending machine that bends sheet metal from three sides. Technical specifications: - maximum working width: 2080 mm - bending capacity: up to 0.8 mm (sheet steel) - All non-ferrous metals 30% more bending capacity - Bending angle: max. 145 degrees - Folding beam thickness: 15 m - lifting the top beam in three positions - Upper beam stroke: 80 mm Degree scale Angle stop rear frame to hold the sheet metal front depth stops - Weight: approx. 250 kg The roller shears (max. Cutting performance 0.8 mm / steel) plus 350 euros - Hand folding machine plus 75 euros The machine complies with the CE guidelines and has a 12 month guarantee. Delivery date: every week Bodog In Azspfx Akaodb We are looking forward to your contact! Invoices are issued with 0% as intra-Community delivery.

See details

Listing

Milling Drilling Machine ITAMA BIMAK 40 FR M

Jonschwil

1,391 km

Milling Drilling Machine
ITAMABIMAK 40 FR M

Call

Condition: excellent (used), Year of construction: 2002, functionality: fully functional, travel distance X-axis: 540 mm, travel distance Y-axis: 240 mm, spindle speed (max.): 1,650 rpm, spindle speed (min.): 45 rpm, spindle mount: MK 4, throat depth: 350 mm, quill stroke: 130 mm, total length: 1,250 mm, total height: 1,900 mm, table width: 225 mm, total width: 1,100 mm, table length: 800 mm, drilling capacity: 40 mm, spindle nose: MK-4, nominal power: 2.2 kW (2.99 HP), Milling-/Drilling Machine, drilling capacity Ø 40 mm, motor 1,9 /2,2 KW, table size 800x225 mm, spindle speed 45-1650 rpm stepless, MT-4, el. table arising device, automatic spindle feed, coolant device, dimensions 1250x1100x1900 mm, weight ca. 600 kg Bjdewt Swzopfx Akasdb

See details

Listing

Cold Circular Sawing - Automatic MEP TIGER 352 NC 5.0

Remseck am Neckar

1,318 km

Cold Circular Sawing - Automatic
MEPTIGER 352 NC 5.0

Call

Condition: new, saw blade diameter 350 mm capacity 90 degrees: round 115 mm capacity 90 degrees: square 95 mm 180 x 95 mm Working height 925 mm Bdodpfx Akjfg Rlceaeb saw blade turning speeds 15 - 90 U/min total power requirement 3,0 kW weight of the machine ca. 0,68 t dimensions of the machine ca. 0,8 x 1,0 x 1,85 m Electro-pneumatic, vertical, linear-guided automatic saw for use of HSS saw blades to make series cuts from 60° left to 45° right steel. The machine also works in semi-automatic cycle. CNC machine with multiprocessor and two with MEP control, latest generation controlled axes that make it possible to achieve 1000 with the same material thickness different cutting programs, each with a different cutting length and number of pieces program.

See details

Listing

Velen

1,037 km

Plasma Cutting Device
HBMCUT 40

Call

Condition: new, welding current 15 - 40 A Bsdpfxsupxfhj Akasdb cutting capacity 1 - 16 mm open-circuit voltage 96 V Required air-pressure min. 4 bar connected load 3,6 kW connected load frequency 230 V weight 9,0 kg Dimensions (LxWxH) 371 x 153 x 232 mm Exhibition machine !! Inverter plasma cutter with accessories: Cutting torch with 4 m cable, earthing clamp with 2.5 m cable, air pressure gauge, Mask and brush.

See details

Advertise here