Rotary airlock valve / rotary valve

Nestro Lufttechnik Separatorschleuse

Condition: excellent (used), 4 kW motor Chedoup Ulqopfx Ad Isc Transport dimensions Height 310 cm Width 90 cm Length 180 cm

Condition: used, Included container 28,5 m3 Chedpfxsv Hpn So Ad Ijc

Condition: used, machine/vehicle number: 008477, Type of edging: Thin edge, Thick edge, Solid wood Gluing System: EVA Hotmelt Premilling Unit: yes Corner Rounding Unit: yes Max feed speed: 18 m/min Maximum panel thickness: 60 mm Chsdpfx Asy Hq Nvod Ijc Operating Units: 7 nr

Condition: used, Year of construction: 2008, - with workpiece return - Edge thickness max: 20 mm - Board thickness: 8-60 mm - Feed rate max: 20 m/min - with groove milling unit One: Edge banding machine with return Manufacturer: Brandt Type: KDF 991 Year of manufacture: 2008 Workpiece return Manufacturer: Ligmatech Type: ZHR 05 Boomerang Year of manufacture: 2007 Technical data - Right-hand machine - Machine length: 8,260 mm - Ligmatech ZHR 05 length: 10,460 mm - Edge thickness max: 20 mm - Board thickness: 8-60 mm - Thickness of wound edge max: 3 mm - Workpiece width min: 60 mm - Feed rate max: 20 m/min - Stepless feed: material pressure zone adjustable via servomotor - Electromotive height adjustment - Infeed stop: adjustable via servomotor Chjdpfxezuyp Ss Ad Iec - Infeed stop for thin elements - Glue system for granules: glue pot above the feed chain - BRANDT glue system QUICKMELT QA 45 - Suitable for PUR adhesives - Magazine for single strips - Spray device, front, cleaning at the rear - Pre-milling unit - Preheating zone - End trimmers: 2 motors, pneumatically adjustable - Flush trimming: top + bottom, manually adjustable - Fine milling trimming unit: 2 motors, adjustable via servomotor R2 - Edge rounding unit: 4 motors, manually adjustable - Groove milling unit: manually adjustable with tilting function - Radius trimming blades: R2, pneumatically adjustable / Second set for R1 included - Flat trimming unit - Glue joint trimming blade - Cleaning fluid spray at the rear - Buffing unit - Solid wood edge sanding unit - Conformity marking: Including complete documentation and CE

Condition: good (used), functionality: fully functional, machine/vehicle number: K005A02146X, Year of construction: 2000, operating hours: 7,920 h, load capacity: 5,000 kg, lifting height: 4,600 mm, load center: 600 mm, fuel type: gas, mast type: duplex, construction height: 3,200 mm, fork length: 2,400 mm, overall weight: 7,880 kg, total height: 3,200 mm, total length: 6,000 mm, total width: 1,520 mm, Equipment: UVV, sideshift, Hyster H5.00XM LPG Forklift Year of manufacture: 2000 Operating hours: 7,920 h Lift height: 4,600 mm to top of forks Overall height: 3,200 mm Load capacity: 4,410 kg effective with fork positioner and sideshift Overall dimensions approx.: 1,520 mm wide; approx. 3,600 mm long without forks Fork length: 2,400 mm - Fork positioner adjustable from approx. 460 mm to 1,350 mm overall width - Bracket for 2 gas cylinders with changeover valve - Sideshift - Power steering Chsdpjyi Eyajfx Ad Ijc The machine is in perfect working order and ready for immediate use. Affordable delivery by professional service provider possible. Have a look at our other ads as well. We always have a large selection of high and low lift trucks and forklifts in stock. Do you need spare parts for your forklift, pedestrian stacker, etc.? Just contact us. Didn’t find the right unit? Simply send us an email with your requirements and we will check if we have the right machine for you.

Condition: used, Technical specifications: Filter bag diameter: 6 x 600 mm Collection bag diameter: 6 x 600 mm Dust extraction port: 300/250 mm Power supply: 380 V Motor speed: 2800 rpm Motor power: 5.5 kW Overall dimensions: Length: 4700 mm Width: 1100 mm Height: 1100 mm Cjdpfezhuf Ijx Ad Iehc

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, Well-maintained container tilter for roll containers. Csdpfx Adszhnnio Iohc Several units available for purchase or rental.

Condition: used, Year of construction: 2017, machine/vehicle number: 16836, load capacity: 500 kg, overall weight: 9,645 kg, construction height: 3,200 mm, fuel type: electric, battery voltage: 48 V, product width (max.): 2,200 mm, working height: 19,000 mm, 180730 Cedpoygpk Djfx Ad Iehc Serial Number: SF22644 Battery Details: 48V 6PzS 750Ah (aus 2017)

Condition: used, Year of construction: 2014, edge thickness (max.): 12 mm, feed rate X-axis: 18 m/min, TECHNICAL DETAILS Workpiece Dimensions Min. panel height: 10 mm Max. panel height: 60 mm Min. panel width: 70 mm Min. edge thickness: 0.4 mm Max. edge thickness: 12 mm Max. feed rate: 18 m/min Feed and Guidance Pressure with idler rollers Panel support guides Unit for Panel Processing Pre-milling unit Automatically timed engagement Motor power: 2.2 kW Edge Gluing Edge roller magazine Cjdpfx Ajzmtivjd Iohc Glue reservoir for EVA hot melt adhesive Pre-melter for EVA hot melt adhesive Hot air system: AIRTEK Number of pressure rollers: 4 NC-controlled Edge Processing Units Number of edge processing units: 7 End-capping unit Number of motors: 2 Motor power: 0.35 kW Fine milling unit for flush trimming and rounding Number of motors: 2 NC-controlled Motor power: 0.55 kW Corner rounding unit Manufacturer model: WD60 Motor power: 0.35 kW Rough milling unit Motor power: 3.5 kW Edge trimming unit NC-controlled Glue application unit Polishing unit Number of motors: 2 Motor power: 0.18 kW MACHINE DETAILS Control and Safety Machine programming software: PowerControl PC20 Safety standard: CE marking Electrical Data Total connected load: 22 kW EQUIPMENT Pre-milling unit Edge roller magazine Glue reservoir for EVA hot melt adhesive Pre-melter for EVA hot melt adhesive Hot air system AIRTEK 4 pressure rollers End-capping unit Fine milling unit for flush trimming and rounding Corner rounding unit WD60 Rough milling unit Edge trimming unit Glue application unit Polishing unit Spray unit Machine programming software PowerControl PC20

Condition: ready for operation (used), Year of construction: 2016, machine/vehicle number: 0-261-04-6588, functionality: fully functional, power: 21 kW (28.55 HP), workpiece height (max.): 60 mm, feed rate X-axis: 18 m/min, total length: 6,060 mm, overall weight: 2,600 kg, The machine comes with the following configuration: Emulsion spray at both infeed and outfeed Edge pre-heating Pre-milling unit: Tool diameter: 100 mm, Tool height: 63 mm, diamond tool with replaceable knives, motorized adjustment for removal Glue application unit: Glue and hot air application, heated application roller, quick-change feature for the entire unit, automatic position adjustment via motor, 3 pressure rollers, edge feed speed: 14 m/min End trimming unit: Twin-motor unit with automatic tilt up to 15°, THK prism guide Radius milling unit: 2 tools, automatic 2-axis adjustment, automatic overlap adjustment Copying unit: 2 motors, automatic tool position change via servomotor, electromagnetic horizontal movement, vertically hydraulically damped movement Cleaning and polishing unit Automatic return conveyor: Homag TFU 140 TECHNICAL DETAILS Workpiece thickness: 8–60 mm Max. feed speed: 18 m/min MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 6,060 x 1,555 x 2,300 mm Weight: 2,600 kg Chedeyu If Nspfx Ad Ioc Total connected load: 21 kW Compressed air: 6 bar Air consumption: approx. 350 l/min Extraction: 2,820 m³/h EQUIPMENT Double top pressure for part stability Electronic thickness control Frequency converter for feed Automatic lubrication of feed chain Automatic motor calibration Touch control panel