Husmann roll packer

Husmann GT 1750 E

Condition: refurbished (used), Complete Cutting Machine Group from LINCK: Gijdpfxsrvh Tmj Afnen 1.Pre-cut feed table Linck EV20 (condition:good) 2.Chipper canter LinckV18 (condition: good) 5.Boad separator unit Linck SE (condition: refurbished) 1. EV20- Pre-cut feed table Linck EV20 for smaller logs. Hydraulic unit is included. 2. Chipper canter LinckV18. 2x85 KW motor with direct drive. Completely refurbished set. We can also offer full electrical installation and assembly of line on site.

Condition: good (used), Year of construction: 2009, functionality: fully functional, Weight 4950 kg, total weight 12000 kg Gjdpfx Aewpmckjfnsin 5.5 kW

Condition: not inspected (used), Year of construction: 1985, functionality: fully functional, pressing force: 50 t, bale length: 1,000 mm, bale width: 750 mm, bale height: 750,750,750 mm, bale weight: 500 kg, input voltage: 400 V, overall weight: 7,500 kg, oil tank capacity: 500 l, power: 30 kW (40.79 HP), empty load weight: 7,500 kg, input frequency: 50 Hz, Manufacturer: Paal Gisdpfxjic Rl Dj Afnen Typ: Pacomat V Year of construction: 1985 Press power main press: 50 t Specific press capacity: 5 kg/cm² Feed channel: 1.000 x 720mm (l x w) Theoretic throughput rate: 200 cbm/h Bale size: 700 x 1.000 mm (w x h) length adjustable Driving motor: 30 kW Bale weight: approx. 500 kg Machine weight: approx. 8t The hydraulic unit is functional, the drive motor is in the removed state.

Condition: good (used), Year of construction: 2006, operating hours: 1,522 h, Manufacturer: Husmann Typ: SPB 22 SEN-E Build in: 2006 Volume: 22m3 Back door: top hingend Gijdpfx Afsxbpr Asnjn Lifting system: hook at the front

Condition: ready for operation (used), Year of construction: 2001, operating hours: 19,853 h, functionality: fully functional, machine/vehicle number: 11170000963, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, 5-axis simultaneous Speed 18000 Tool changer 60 pieces / SK 40 DIN69871 Tools included in the price ICS / air blast Gisdpjwqp Huofx Afnjn Heidenhain 426/430

Year of construction: 1988, condition: good (used), machine/vehicle number: 14684/1, suitable for copper cable and plastic recycling Gijdpfx Afenvdq Njnon

Condition: excellent (used), Year of construction: 2017, operating hours: 13,284 h, functionality: fully functional, pressing force: 140 t, filling opening width: 1,100 mm, filling opening length: 1,600 mm, bale width: 1,100 mm, bale height: 1,100 mm, bale weight: 1,500 kg, oil tank capacity: 2,600 l, Technical data baler: Manufacturer Bollegraaf Type HBC 140 Year of construction 2017 Giodpfx Afexpxhvensn Working hours 13,284, as of October 2025 Press power main press 140 tons (max. 153,5 tons) Press power of pre-press 70 tons Feed channel 1,600 x 1,100 mm (l x w) Capacity per cycle time 4,34 cbm Theoretic cycle time 16 sec. Bale size 1,100 x 1,100 mm (w x h), length adjustable Driving motor 2 x 75 kW Connected load 209 kW Tying system 5-fold vertical, fully automated Throughput rate at a bulk weight of 30 kg/cbm approx. 30 tons/h bulk weight of 50 kg/cbm approx. 46 tons/h bulk weight of 100 kg/cbm approx. 82 tons/h Bale weight 850 up to 1.500 kg Hydraulicoil 2.600 l Univis N46 Baler dimensions with conveyor built up with hopper approx.13,200 x 24,200 x 7,333 mm (l x w x h) Transport dimensions only baler approx.13,200 x 2,884 x 3,539 mm (l x w x h) Machine weight baler approx. 51,810 tons Technical data feeding and elevating conveyor with gooseneck: Manufacturer Bollegraaf Typ HBT 1216/1800 * 23,300 30°/15° Year of construction 2017 Driving motor 7,5 kW Length feeding conveyor 6,750 mm Length elevating conveyor 14,400 mm Length goose neck 2,150 mm Grade 30° Effecting width 1,754 mm Height of side wall feeding conv. 500 mm Height of side wall elevating conv. 800 mm Transport dimensions feeding conveyor with one segment elevating part 9,816 x 2,500 x 2,242 mm (l x w x h) Transport dimensions elevating conveyor with goose neck 13,472 x 2,800 (without motor) x 2,729 mm (l x w x h) Pit dimensions 10,000 x 3,200 x 1,200 mm (l x w x d) Condition: The press is in very good condition and ready for immediate operation, see the function video for more information. The conveyor belt chain needs replacing. The system will be in operation until December 2025. Scope of delivery: baler with conveyor belt, maintenance platform, access ladder, two wire feed stations for 5 wire reels each (without wire), and bale slider. Comments: The documentation (Manual, CE-declaration, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: new, - Motor power 15kW - Control SPS supported, with two-hand safety circuit Giodpfx Aefbx Nbsfnon - cutting force 50to - idle speed ca.22,3 mm/sec - Splitting table straight design - cutting channel: - max. length ca.3000mm - max. opening ca.1250mm - machine weight ca.4,8to goods to order price and further information on request

Condition: used, Year of construction: 2019, operating hours: 1,454 h, machine/vehicle number: E300007203, axle configuration: 4x4, fuel type: diesel, Equipment: all wheel drive, Drive: Wheel Godpfx Astr Iywofnsin Empty weight: 7.920 kg Mast: articulated arm Lifting capacity: 250 kg Working height: 1.800 cm Max. horizontal reach: 1065 m Transport dimensions (LxWxH): 7.77x2.35x2.27 Please contact PFEIFER GROUP for more information

Condition: new, Year of construction: 2024, Our industrial slicers are specially designed for a wide range of demanding industrial applications. The ICU 10 A 30 has standard blades. This makes these shears very suitable for applications such as: Vehicle recycling: catalytic converters, exhaust pipes, doors, A- and B-pillars, drive shafts (hollow), engine supports, steering rods, bumpers. Demolition: bar stock, pipe sections, frames, building materials, wood, roots (trees), fuel lines, heating pipes, cables. Gsdpfscanlhox Afnein Foundry: Removal of risers and casting runs from aluminum casting molds. Lightweight, user-friendly and ergonomic Fast; for efficient (production) processes Various blade types available - Cutting capacities up to 65.7 tons - Quick and easy to replace Safe - Dead man's switch - Moving parts protected Drive: Electric 23 Volt Operating pressure: 500 bar Weight ready for operation: 15,3 kg Blade opening: Max 158 mm Cutting capacity: 246 Kn / 25.1 T Dimensions: 696 x 230 x 177 mm