Used Worm Gear Screw Jacks for sale (14,116)

Condition: new, STAR ball screw Gbjdpfezcwkwjx Aiksw Type: 1510-3-1607 Pitch: 5 mm Thread length: 2008 mm Overall spindle length: 2100 mm Thread diameter: 31 mm 4 pieces in stock.

Condition: used, Screw for C250-CFD Gbodpfx Aijzzcdfjksw

Condition: used, Worm gear for C400 “Wolfking”. Gjdjzzcrijpfx Aiksbw

Condition: ready for operation (used), Year of construction: 1990, functionality: fully functional, machine/vehicle number: 018.0402, gear diameter: 300 mm, controller model: Optronic CNC D140, workpiece width (max.): 2,300 mm, workpiece height (max.): 500 mm, center height: 250 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Gbjdjzzba Sjpfx Aiksw Gear diameter: 300 mm Module range: 0.5–8 mm Pressure angle: 35° Max. workpiece width: 2,300 mm Max. workpiece height: 500 mm Max. workpiece weight: 100 kg Center height: 250 mm Table length: 2,300 mm Grinding spindle travel: 200 mm MACHINE DETAILS Control system: Optronic CNC D140 Dimensions & Weight Dimensions (L x W x H): 5,900 x 1,300 x 2,000 mm Net weight: 7,500 kg Shipping packages: 5 units

Year of construction: 1991, condition: ready for operation (used), Available immediately, ex works: Drill press, Metalac Type BR 32 Year of manufacture 1991 Spindle taper MK 3 Drilling capacity: 32 mm steel, 40 mm cast iron Automatic feed Table: 600 x 470 mm Drilling stroke: 180 mm Overhang: 280 mm 2 vices Coolant system Weight: 750 kg Gbodpe Aa Inksfx Aikow Price: EUR 1,250.00 plus VAT, ex works.

Condition: refurbished (used), Year of construction: 2027, functionality: fully functional, gear diameter: 250 mm, spindle speed (max.): 71 rpm, spindle speed (min.): 35 rpm, total height: 1,800 mm, total length: 2,200 mm, total width: 1,800 mm, controller manufacturer: Siemens Sinumerik ONE, drive type: Sinamics S120, control type: CNC control, Equipment: rotational speed infinitely variable, Economical production of straight-toothed bevel gears – both in single units and in series: The SW KF 250 is based on the proven cast iron bed of the Chemnitzer Modul ZFTK 250 and is completely rebuilt by Serwema Retrofit Solutions, with Siemens Sinumerik ONE, digital Sinamics S120 drives, and an electronic worm gear between the workpiece and weighing drive. The machine mills using the convoid process, a universal and highly economical process for straight-toothed bevel gears, as well as producing herringbone gears and spur couplings. Application areas: agricultural machinery, gearbox construction, drive technology, railways and mining – anywhere where straight-toothed bevel gears up to 250 mm are required and new machines are hardly offered. Delivery time is five to six months from order, with acceptance testing in Chemnitz together with you. The SerWeMa gear cutting software guides the operator through workpiece and tool data using masks, without the need for programming. Integrated technology cycles: plunging, rolling, plunging and rolling, and plunging with double rollers. Engagement angles from 14 to 28° can be freely selected, and the number of teeth can range from 6 to 100. The stiff, ribbed cast iron bed provides the static and dynamic rigidity for bevel gears up to module 7 with a tooth width of 40 mm; the hydraulic and coolant unit is integrated into the bed, with components from Rexroth, Parker and Hydac, and pulse lubrication from Bielomatik. All worm gears are newly manufactured in bronze. Gbjdpfxoz E H Dbj Aikew Technical data: max. bevel gear diameter 250 mm, max. module 7, number of teeth 6–100, max. tooth width 40 mm, engagement angle 14–28°, distance between workpiece spindle and bevel tip 40–280 mm, workpiece spindle mount 80 mm metric, cutter head diameter 355 mm with 22 cutters per side, cutter head speed 35–71 rpm, connection value 30 kVA. Installation dimensions approx. 2.5 × 2.1 × 1.9 m, weight approx. 6 t. Scope of supply: complete electrical equipment with Siemens Sinumerik ONE and Sinamics S120, climate-controlled control cabinet manufactured in-house, dialog software, all worm gears in bronze, magnetic chip conveyor, circulation and pulse lubrication, hydraulic unit, coolant system, new paint RAL 5015/7035, geometric acceptance test according to SerWeMa protocol based on DIN standards, documentation (operating manual, electrical diagrams with parts lists, hydraulic and lubrication diagram), CE marking. Optional: installation, commissioning and operator training at your site.

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, rotary table diameter: 450 mm, position of the milling head: Schwenkbar (45°), table diameter: 450 mm, total length: 5,600 mm, gear diameter: 500 mm, total height: 3,100 mm, total width: 3,600 mm, input frequency: 50 Hz, type of input current: three-phase, spindle speed (max.): 340 rpm, table bore: 125 mm, spindle speed (min.): 80 rpm, travel distance X-axis: 325 mm, travel distance Y-axis: 200 mm, travel distance Z-axis: 400 mm, overall weight: 14,800 kg, distance table to spindle center: 350 mm, tool diameter: 200 mm, controller manufacturer: Siemens Sinumerik 840D sl, drive type: Sinamics S120, control type: CNC control, Equipment: documentation/manual, rotational speed infinitely variable, A Pfauter PE 500 for the economical production of straight and helical spur gears up to module 12 and 500 mm in diameter – completely overhauled by SerWeMa with Siemens Sinumerik 840D sl, equipped with a gripper unit and a 32-position workpiece storage for unmanned operation. The machine is ready for operation in our hall in Chemnitz: you can inspect it under power, and if desired, we will mill your own sample part and you can take delivery of the machine here. No delivery time, no risk. Sold by Serwema Retrofit Solutions, the company that carried out the overhaul and knows the machine inside out. The general overhaul included complete geometric overhaul by grinding and scraping, new roller bearings in the main drive and in the milling head, measuring and reconditioning the worm gear, overhauled or new ball screw drives, overhaul of hydraulics, lubrication and coolant system, and new electrical equipment with Sinumerik 840D sl, Sinamics S120 and new axis motors. An electronic generating gear controls all generating and single-part machining processes, and an NC-controlled crash recovery protects the tool and workpiece in the event of a power or phase failure. New paint in RAL 7035/5015 with oil and coolant resistant two-component paint, acceptance of geometry according to SerWeMa protocol based on DIN ISO 6545. The machine controls six CNC axes: X radial, Y tangential, Z axial, A milling head swivel, B milling cutter drive and C table drive. The SerWeMa gear cutting software guides you through workpiece and tool data via masks, without the need for programming: up to three position-oriented gearings per workpiece, each with its own tool, up to three cuts per gearing with simultaneous or counter-rotating movement, form corrections for convex, conical and convex-conical profiles, lead-in and lead-out phase correction, chamfer milling, dimension correction via tooth width, two-roll or two-ball gauge, measuring stop, shift strategy with defect management per generating cutter and cutting force monitoring with automatic retraction. Technologies: generating milling, single-part milling and worm gear milling both radially and tangentially. A hand-held device with a handwheel allows setup directly in the working area. Technical data: max. workpiece Ø 500 mm, max. module 12, max. milling cutter Ø 200 mm, max. milling cutter length 240 mm, shift travel 200 mm, milling cutter speed 100–450 rpm, swivel angle +25°/−45°, travel radial 325 mm (axis distance 25–350 mm), travel axial 400 mm (310–710 mm), table diameter 450 mm, table bore 125 mm, connection power approx. 60 kVA. Installation dimensions incl. automation approx. 7.2 × 4.5 × 3.3 m, weight approx. 16.8 t. Gsdpjz Et E Eefx Aikobw Equipment: machine enclosure, chip conveyor, gripper unit with two grippers, workpiece storage with 32 positions, preparation for emission extraction (150 mm nozzle, Harting connector on the machine roof). Documentation complete in German: operating manual, electrical diagrams with parts lists, hydraulic and lubrication diagrams. Serwema optionally offers: trial part milling in our factory, additional milling arbors, assembly and commissioning at your location, operator training and a control system upgrade to Sinumerik ONE. Spare parts and service come from a single source, worldwide, even after the purchase.

Year of construction: 2022, condition: like new (used), Fiam Model ED B M 1|1 EASYDRIVER SCREW FEEDER WITH VIBRATING HOPPER – MAXI The EasyDriver screw feeders, Fiam projects and products, can be used in semi-automatic manual CA screwing systems and in automatic MCA screwing modules. They feed the screws without jamming and handle the entire work cycle with great flexibility: simple and fast, they optimize the tightening sequences by being customized according to the various applications and assembly requirements. Model Gbedpfxj Ah Hhbj Aikow ED B M 1|1 Dimensions (mm) L 800 x W 700 x H 530 For screws L (mm) 35÷60 Weight (Kg) 110 Capacity (Ø/L) Ø 420 / 3 L Air consumption (l/s) 2÷16 Type For CA/MCA

Condition: used, Year of construction: 2020, functionality: fully functional, overall weight: 2,041 kg, total length: 2,300 mm, total width: 1,380 mm, total height: 1,950 mm, power: 75 kW (101.97 HP), volume flow: 851 m³/h, pressure (min.): 5 bar, pressure (max.): 7 bar, ambient temperature (min.): 5 °C, ambient temperature (max.): 40 °C, noise level: 74 dB, protection type (IP code): IP54, Equipment: documentation/manual, refrigerant dryer, type plate available, For sale is a highly efficient, frequency-controlled screw compressor from the top-of-the-line range of the German manufacturer ALMiG, type V-DRIVE 75 (PLUS O version including heat recovery), first purchased at the end of 2020. This unit impresses with minimal energy costs thanks to its loss-free 1:1 direct drive, stepless speed control and integrated heat recovery (WRG). Technical data: Manufacturer: ALMiG Kompressoren GmbH Type: V-DRIVE 75 PLUS O including WRG Drive power: 75 kW Maximum pressure: 7 bar Gbsds Ahppdepfx Aikew Volume flow: up to 14.18 m³/min (approx. 851 m³/h) Voltage: 400 V / 50 Hz Control system: ALMiG Aircontrol Premium (including RS 485, operating and fault messages) Dimensions (L x W x H): 2,300 x 1,380 x 1,950 mm Weight: 2,041 kg Equipment & special features: Installation in a special container: - Weather-protected outdoor installation directly on the company premises. - Generous, double-wing access doors for unrestricted maintenance access. - Integrated window with exterior roller shutter. - Standardized container corner fittings (ISO corners) for crane or lifting gear handling are available. - Integrated heat recovery (WRG): For direct use of waste heat for heating purposes or hot water. - Integrated refrigeration dryer (PLUS) & filter system (O): High compressed air quality directly from the compressor. - SCD frequency inverter & asynchronous motor (IP55): Stepless adaptation to demand, soft start without peak loads. - Sound-insulated: Extremely quiet operation thanks to optimized encapsulation and vibration-isolated installation. - Documentation: Complete documentation / manual available. Important sales & collection conditions: - Delivery condition: Sale is ex works (FCA). - Loading: No loading facilities available on site! - The removal must be organized by the buyer using a truck with a loading crane or a separate mobile crane (lifting equipment suitable for ISO container corners required). - The sale is made excluding any liability for defects and warranty. Subject to prior sale and errors.

Condition: ready for operation (used), Powder feeder, screw conveyor, screw blender, used machine Dimensions: 855 x 720 x 810 mm Container size: 600 x 500 x 800 mm Electrical data: 230/400 V; 0.43 kW; 50/60 Hz Gbsdpjw Tt S Esfx Aikow The screw conveyor has a double bearing design and is equipped with a cover that opens due to the material flow.

Condition: good (used), functionality: fully functional, Technical specifications: Gbodpfx Ae Aik Ilsikow Manufacturer: Heidenreich & Harbeck Werkzeugmaschinenfabrik Hamburg Machine type: Spiral bevel gear hobbing machine “RAPID” Model: 15 KH Maximum pitch circle diameter: 150 mm (at a ratio of 1:1) / up to 210 mm (at a ratio of 1:7.5) Minimum pitch circle diameter: 10 mm Maximum module: 5 mm Maximum tooth length: 50 mm Maximum hob stroke: 60 mm Number of strokes per minute: 63–400 (in 7 steps) Motor power: 3 HP (approx. 2.2 kW) Machine dimensions (footprint): 1,320 × 1,730 mm Condition: Mechanically well-maintained.

Condition: used, Year of construction: 2017, Electric Forklift Option G+I 139 750 ZT Rated capacity: 770 kg Load center distance: 700 mm System voltage: 80 V Nominal power: 9.0 kW Weight without battery: approx. 6573 kg Battery weight min/max: approx. 1232/1362 kg Capacity at lift height 9280 mm: 600 kg / 520 kg / 460 kg at load center 700 / 800 / 900 mm Capacity at lift height 7500 mm: 680 kg / 590 kg / 520 kg at load center 700 / 800 / 900 mm Capacity at lift height 7000 mm: 770 kg / 670 kg / 590 kg at load center 700 / 800 / 900 mm Battery Charger Type D400V G 80/80 B - SLT 100 Godj Aiduxepfx Aiksbw Serial No. 93797922 Date of manufacture: 2016/12 Input: D400V/3 X 14.3A/50-60Hz Output: 80V/80A Number of cells/type: 40 Pb Battery capacity: 400 - 845 Ah / 7.5 - 14 h Protection class: IP20 Traction Battery Serial No. O30652 Week/year of manufacture: 49/2016 Nominal voltage: 80 V Number of cells: 40 Capacity C5: 465 Ah Weight: approx. 1294 kg (±5%) Acid volume: 172 l Part No.: 51126415

Condition: ready for operation (used), Gearmotor, gear unit Dimensions: 930 x 410 x 390 mm Weight: 196 kg Electrical data: 400 V; 29.5 A; 15 kW Gbjdsukn Inepfx Aikew Gear unit speed: 182 rpm Motor speed: 1460 rpm

Condition: used, Screw for PowerGrind 280 Gsdpjzzckrjfx Aikebw

Condition: good (used), Year of construction: 2014, Has been serviced regularly. Technical values: 81.2 L/s, 13 bar. Connection values: 400V / 50HZ, 26kW Width: 1260 mm Depth: 860 mm Godpfx Ajvmpt Ujiksbw Height: 1500 mm Weight: 520 kg

Condition: good (used), Year of construction: 2010, The device has been well maintained. Comp. air Pmax: 13 bar Refr. Pmax High: 18.7 bar Electrical connection values: 230 V / 50Hz, Kw 1 Ph Width: 460 mm Depth: 500 mm Height: 830 mm Godpfsvmqkhox Aiksbw Weight: 60 kg

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, Technical data: * Manufacturer: Kaeser Kompressoren * Model: SM 11-TA 11-280 * Type: Screw compressor * Motor power: approx. 11 kW Gjdpfsz Rkp Hox Aikjbw * Compressed air tank: 280 liters * Compressed air treatment: Refrigerant dryer * Drive: Electric motor * Design: Compact compressed air station with tank and dryer Features and advantages: * High-performance screw compressor for commercial use * Integrated compressed air tank for buffering the compressed air * Refrigerant dryer to reduce moisture in the compressed air * Compact design for space-saving installation * Suitable for workshops, trades, and smaller production facilities * Proven Kaeser quality and reliable screw compressor technology

Condition: good (used), functionality: fully functional, machine/vehicle number: 0430342, Spur gear hobbing machine Tos OFE 22 Gbede Abanxjpfx Aiksw machine no. 0430342

Condition: good (used), Year of construction: 2013, overall weight: 1,519 kg, power: 75 kW (101.97 HP), volume flow: 14.85 m³/h, pressure (max.): 12.8 bar, Air Compressor Atlas Copco GA75VSD FF Technical Data Manufacturer: Atlas Copco Airpower Model: GA75VSD FF Year of manufacture: 2013 Maximum pressure: 12.8 bar Free air delivery: 14.85 m³/min Godpfjxk U Alsx Aikjbw Motor power: 75 kW Motor speed: 3,000 rpm Weight: 1,519 kg Power supply: 400 V 50 Hz 3 phase Design: Oil-injected screw compressor Control: Electronic control panel Origin: Made in Belgium No liability is accepted for the correctness, completeness, or up-to-dateness of the information provided.

Year of construction: 2015, condition: like new (used), Screw-on jaw Claw jaw Gbjdpfxjfmdgcj Aikjw Type SZKA 312 Weight 3.2 kg

Condition: new, Year of construction: 2026, functionality: fully functional, overall weight: 280 kg, total length: 1,400 mm, total width: 650 mm, total height: 1,200 mm, power: 7.5 kW (10.20 HP), operating pressure: 10 bar, pressure (min.): 6 bar, pressure (max.): 10 bar, noise level: 60 dB, type of cooling: air, Equipment: documentation/manual, refrigerant dryer, type plate available, Highly efficient screw compressor with 7.5 kW / 10 bar (also available as a 4 kW version) Gbsdpfszpfwwjx Aikew complete 4-in-1 unit frequency-controlled servomotor 270-liter pressure tank refrigerant dryer fine filter New machine, delivery time approximately 1 week We would be happy to demonstrate the machine to you at our facility. Highly efficient, permanent magnet servomotor Frequency-controlled / load-dependent for clean and dry compressed air suitable for laser applications with animated color display single-stage screw unit air-cooled durable and low-maintenance Sales are exclusively to commercial businesses. Delivery / consultation / sales only in Germany / Austria technical data (approx.): Length: 1.40 m, Height: 1.20 m, Width: 0.65 m Weight: approx. 280 kg Pressure: 10 bar Flow rate: approx. 0.9 m³/min at 10 bar Noise level: 60 ± 2 dB(A)

Condition: used, Year of construction: 2014, functionality: fully functional, power: 315 kW (428.28 HP), pressure (max.): 10.4 bar, type of cooling: air, Equipment: refrigerant dryer, type plate available, Screw compressor Atlas Copco ZT315VSDFF Inverter and dryer integrated Year of manufacture: 2014 Total operating hours/load hours: 32,354/32,056 h Maximum pressure: 10.4 bar Gbjdpfxoz N Evxs Aikew Delivery rate: 22.3 – 44.6 m3/min

Condition: used, Year of construction: 2021, operating hours: 11,334 h, functionality: fully functional, power: 15 kW (20.39 HP), volume flow: 135.6 m³/h, pressure (max.): 13 bar, type of cooling: air, Equipment: type plate available, Screw compressor, Alup Allegro14 Inverter integrated 15 kW 13 bar Gedpfx Aiez Ny Shskebw 2.26 m3/min Year of manufacture: 2021 Operating hours: 11,334 h

Condition: reconditioned (used), functionality: fully functional, screw conveyor diameter: 65 mm, Stock No. 2845 1 used, overhauled, and functionally tested compounding and granulation line, ADS-STS Coperion 65 – Throughput up to approx. 400 kg/h – Material-dependent, consisting of: Volumetric material dosing twin-screw extruder, 2 x Ø 50 mm, drive 1.1 kW Twin-screw extruder / compounder – Co-rotating Screws 2x Ø 65 mm – 40 L/D, segmented screws and cylinder (water-cooled) Screw speed up to 600 rpm, extruder drive 90 kW – AC adjustable 2x degassing zones, 1x with vacuum pump 1.5 kW and condensate separator 1x side-fed twin-screw extruder ZSB, 2x Ø 35 mm, drive 0.75 kW Screen changer, screen area 125x70 mm with hydraulics 1.5 kW Die head with flanged connection, holes 13 x Ø 3.2 mm Strand cooling tank, stainless steel, L 4000 mm x W 350 mm Strand granulator SG 100, drive 3 kW Control cabinet with relay control, ABB frequency inverter. Gjdpfx Aioz A R R Hskjbw Gravimetric dosing system OPTIONAL, available at an extra charge. Test run with your material possible in the short term, appointment by arrangement at our Wuppertal plant. We have other compounding lines and accessories in stock and ready for delivery.

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: F20326Y00151, Year of construction: 2021, operating hours: 8,186 h, load capacity: 1,400 kg, lifting height: 4,810 mm, free lift: 1,630 mm, fuel type: electric, mast type: triplex, construction height: 2,065 mm, No minimum price – guaranteed sale to the highest bidder! Note: The sale does not include a charger. TECHNICAL DETAILS Lifting height: 4,810 mm Free lift: 1,630 mm Lifting capacity: 1,400 kg Fork length: 1,190 mm Fork width: 560 mm MACHINE DETAILS Mast type: Triplex Drive: Electric Battery manufacturer / type: Kion / BTR-0023V-VL41M-SFP-002M Gbjdpfx Aijzza Ubskjw Battery year of manufacture: 2024 Battery voltage: 24 V Battery capacity: 410 Ah Battery tray length: 720 mm Battery tray width: 205 mm Battery tray height: 620 mm Operating hours: 8,186 h Dimensions & Weight Dimensions (L x W x H): 2,200 x 800 x 2,060 mm Overhead height: 2,065 mm Unladen weight: 1,500 kg EQUIPMENT Documentation available CE marking