Used Screwdriver System for sale (103)

Condition: good (used), Air ratchet wrench, impact wrench, air ratchet Nsdpfx Aajb A Sx Re Eewr -Square: 10 mm -Length: 400 mm -Weight: 4 kg

Condition: used, Year of construction: 2017, machine/vehicle number: D 941 479, overall weight: 16 kg, input frequency: 50 Hz, The Atlas Copco Power Focus PF4000-C-HW is the ideal solution for precise and efficient bolted joints in industry. We offer this used control unit together with the matching STV-ST61-30-40 bolted joint. Technical specifications: Control unit model: Power Focus PF4000-C-HW, year of manufacture: 2017 Nwodpoulayxjfx Aa Eor Screwdriver model: STV-ST61-30-40, year of manufacture: 2017 Power supply: 200-240 V/ (50-60 Hz) Power consumption (W): 320 W Maximum operating temperature: +40.0° C Minimum operating temperature: +5.0° C Frequency: 50-60 Hz For further details, see the type plates on the control unit and screwdriver in the corresponding pictures.

Condition: excellent (used), very good condition. video available Njdpjxyxinofx Aa Eswr

Condition: used, Vibratory Feeder with Pneumatic Screwdriver Stand Eco Line Vibratory Feeder, Sorting Device, Bowl Feeder, Vibratory Bowl, Automatic Screwdriver WEBER Type ZSU 24 Machine No.: 1113212 Year of Manufacture: 2003 Vibratory Feeder WEBER ZSU 24 Bowl diameter: 240 mm Bowl internal height: 70 mm Sorting track width: 10 mm Power supply: 230 Volt, 50 Hz Operating pressure: 6 bar (for singulation and screws) Nedpfsxf Up Usx Aa Ejwr Control voltage for pneumatic valves: 24 Volt - Controller for infinitely variable vibration speed = infinitely variable transport speed - Vibratory bowl in protective enclosure - With pneumatic feeding system - Feed impulse via external electrical control - The feeder was used for feeding screws M5 x 12 mm - Some pneumatic hoses need to be replaced - Siemens S7-200 CPU 224 PLC MISSING Space requirements vibratory bowl L x W x H: 450 x 450 x 315 mm Vibratory bowl weight: 32 kg WEVER Eco Line Screwdriver Stand Guide column: Ø 60 x 525 mm Height adjustment: 345 mm Primary stroke pneumatic cylinder 1 FESTO DZF-32-125-P-A-SM: 115 mm Screwdriver holder diameter: Ø 50 mm Secondary stroke pneumatic cylinder 2 FESTO: 30 mm Screwdriver guide diameter: Ø 37 mm Distance screwdriver guide to table: 135 - 465 mm - 1 piece flat cylinder FESTO, Type DZF-32-125-P-A-SM - 1 piece flat cylinder FESTO, Type probably DZF-32-30-P-A-SM - Screwdriver linear motion frame on linear guide - 3 position sensors on the cylinders - Festo pressure switch - Bosch pneumatic valve Screwdriver stand dimensions W x D x H: 200 x 410 x 1050 mm Screwdriver stand weight: 35 kg good condition Total weight vibratory feeder and screwdriver stand: 67 kg Attention: The original Siemens S7-200 CPU 224 PLC is missing (see picture control cabinet without PLC), therefore, an automatic process is not possible in this condition. The control system also managed the separations of the screws and controlled the screwdriver itself. The vibratory bowl is fully functional even without the PLC, the built-in vibratory bowl controller does not require PLC control. Process: Fasteners are filled into the bowl in bulk and conveyed upward by mechanical vibration (micro-throw principle). The vibratory bowl is automatically switched on or off depending on the fill level of the screw magazine. The screw is then conveyed by compressed air through a plastic hose to the downstream device. The feed impulse for each individual screw is triggered externally by the downstream device.

Condition: excellent (used), Desoutter CVI II Controller with angle screwdriver Manufacturer: Georges Renault (Desoutter) Controller: CVI II Angle screwdriver : 01C11200 CVI II Controller From simple start-up operations to complex sequencing applications - with up to 20 phases and 250 cycles - for optimum speed, accuracy and operator comfort with every connection. The controller has various interfaces, including an Ethernet port, an RS232 port and 7 logic inputs and 8 logic outputs (24 volts). The CVI II controller can be used to control a hand-held power tool from the ER series or a stationary screwdriving spindle from the EM series. It is important to note that the CVI II can also be used in combination with a transducer-controlled angle screwdriver such as the Desoutter ERA40J, which has a torque range of 8 to 40 Nm and a 3/8" output. Nsdpowxv Hkjfx Aa Eswr Memory capacity Between 2,500 and 8,500 tightening results per station depending on the number of cycles and operating mode (asynchronous or synchronous). Tightening strategies - Torque and angle monitoring - Angle and torque monitoring - Torque and angle monitoring - Torque and angle rate - Predominant torque - Yield strength - Standstill torque - Torque and angle - Detection of the plastic zone of the joint - Additional torque and angle sensors - Self-tapping - Current monitoring Connectable tools: Angle screwdriver / rod screwdriver / gun screwdriver

Condition: new, functionality: fully functional, Inline Screwdriver Station with Reaction Arm (Higher Torque) Njdpfjwduq Eex Aa Ejwr This station is designed for medium to high torque fastening applications, using an inline electric screwdriver mounted on a reaction arm for enhanced precision and ergonomics. Controlled by a Desoutter CVI3 Vision Controller, it offers advanced tightening strategies, real-time data logging, and full integration with plant networks via Profinet. The screwdriver delivers accurate torque and angle feedback, suitable for applications up to approximately 12 Nm. A positioning reaction arm with encoded axes ensures proper tool alignment and absorbs reaction forces, improving operator comfort and process consistency.

Condition: good (used), Magazine screwdrivers, drywall screwdrivers, automatic screwdrivers, automatic drill/drivers -Magazine screwdriver -280 W 0-1100 rpm -with suitcase -Number: 4 screwdrivers available Price: per piece -Dimensions: 515/285/H75 mm -Total weight: 6 kg/piece Nwedpfx Asb A N Izea Ejr

Condition: used, Year of construction: 2017, machine/vehicle number: D 941 454, overall weight: 16 kg, input frequency: 50 Hz, The Atlas Copco Power Focus PF4000-C-HW is the ideal solution for precise and efficient bolted joints in industry. We offer this used control unit together with the matching ETP ST32-10-I06 bolted joint. Technical specifications: Control unit model: Power Focus PF4000-C-HW, year of manufacture: 2017 Njdpfx Aaeulaxzo Ejwr Screwdriver model: ETP ST32-10-I06, year of manufacture: 2022 Power supply: 200-240 V/ (50-60 Hz) Power consumption (W): 320 W Maximum operating temperature: +40.0° C Minimum operating temperature: +5.0° C Frequency: 50-60 Hz For further details, see the type plates on the control unit and screwdriver in the corresponding pictures.

Condition: ready for operation (used), Posco 500 Desoutter Easy Line Screwdriver Screwdriving System Year of manufacture: 2008 Nodpoxfzz Refx Aa Eewr 6 bar You are welcome to arrange a viewing appointment. We can also organize affordable shipping for you! You will receive an official invoice. For international customers, a net invoice can be issued, provided you have a valid VAT ID number. Subject to prior sale. Visit our shop and take a look at our other offers as well. The mentioned company names and trademarks are property of their respective owners and are used solely for identification and description of the products. Deviations from the technical specifications as well as errors in the item description may occur and are reserved.

Condition: used, Electric dual screwdriver unit with automatic feed and pneumatic double stroke, mounted on handling device, handling system, manipulator for screwdriving technology. Screwdriving Unit: BÖLLHOFF / BOSCH REXROTH Type UVS-100-2-R-E The Böllhoff Uniquick Vario UVS-100-2-R-E dual screwdriver unit features a pneumatic double stroke via Festo valves and cylinders. Various monitoring systems are installed to enable full automation. Screwdriver 1 consists of the following components: - Rexroth type servomotor - Rexroth type 0 planetary gearbox - Rexroth type 0 encoder - Rexroth type 0 straight drive head Screwdriver 2 consists of the following components: - Rexroth type servomotor - Rexroth type 0 planetary gearbox - Rexroth type 0 encoder - Rexroth type 0 offset drive head Dimensions (WxHxD): 165 x 1000 x 200 mm Pneumatic long stroke: 30 mm Pneumatic short stroke: 20 mm Screwdriver spring travel: 20 mm Last screws used: M6 x 15 mm Electric screwdriver unit Rexroth Servomotor Rexroth Type: EC302 SZ3 Material number: 0 Torque: 0.6 Nm/A Peak torque: 0.7 Nm Speed: max. 20,000 rpm Current draw: max. 7 A Weight: 0.8 kg Gearbox unit Rexroth Type: 3GE27 SZ3 Material No.: 0 Efficiency: 90% Reduction ratio: i=18.9 Max. torque: 10 Nm Weight: 0.4 kg Installation length: 65.5 mm Encoder Rexroth Type: 2DMC012 SZ2 Material No.: 0 Nominal torque: 12 Nm Reduction: 1 Efficiency: 1 Weight: 0.55 kg Installation length: 118.5 mm Straight drive head Rexroth Type: 2GA82 SZ2 1/4"SQ Material No.: 0 Spring travel: 20 mm Spring force: 16 - 34 N Tool holder: 1/4" square Max. torque: 10 Nm Reduction: 1 Weight: 0.2 kg Installation length: 90 mm Offset drive head Rexroth Type: 2VNA82 SZ2 1/4"SQ Material No.: 0 Spring travel: 20 mm Spring force: 16 - 34 N Tool holder: 1/4" square Nwsdpfsfx Hyfox Aa Esr Max. torque: 10 Nm Reduction: 1 Weight: 0.6 kg Installation length: 153 mm Handling system: JÄGER HANDLING Type: Handy-flex 300 Horizontal movement: 400 mm Vertical movement: 450 mm Load capacity: max. 14 kg Handyflex reach: 250 to 650 mm Handyflex reach (swung out): max. 860 mm Swivel radius at full extension: max. 360° Guide column vertical: Ø 30 mm Guide columns horizontal: Ø 20 mm - Balancer for vertical movement - Adjustable load capacity - Adjustable stop for limiting swivel radius Dimensions (L x W x H): approx. 1150 x 650 x 1400 mm Total weight: approx. 90 kg Good condition Without the blue steel pallet as base plate Blue steel base plate is not included in the scope of delivery.

Condition: excellent (used), Pneumatic screwdriver PT72 2000 Nm System Norbar Mod. 18033, PT72, NP 4985 € Nwedpofhqmbofx Aa Ejr Condition: Used. Shipping package up to 12 kg. Further articles - new and used - can be found in our shop! International shipping costs on request!

Condition: excellent (used), functionality: fully functional, Armature Screwdriver Powasert ADS SE 1 - Automatic screwdriving - Depth control shut-off - Automatic screw feeding - Pneumatic clamping device - Machine stand Nwedjw H Dzljpfx Aa Esr - Support roller conveyor with right support leg - Support roller conveyor with left support leg

Condition: good (used), Magazine screwdrivers, drywall screwdrivers, automatic screwdrivers, automatic drill/drivers Nsdpfob A N N Rex Aa Ejwr -Magazine screwdriver: for self-drilling screws, sheet metal screws -Suitcase -Total weight: 10 kg

Year of construction: 2002, condition: good (used), Complete Desoutter screwdriver system consisting of: 1 x Transducer controlled angle screwdriver Desoutter ERA40J Art.Nr .: 6151650800 Torque range: 8 to 40 Nm Output: 3/8 " Number of revolutions. 900 min-1 Length: 458 mm Weight: 2.1 kg 1 x Transducer controlled angle screwdriver Desoutter ERA60J Art.Nr .: 6151650810 Torque range: 15 to 60 Nm Output: 3/8 " Number of revolutions. 570 min-1 Length: 469 mm Weight: 2.2 kg 1 x screw control Desoutter MODCVI-2 (= rack version of TWINCVI-2) with transformer. Art.Nr .: 6159325210 Screw - on cable: 2 Number of screw cycles per channel: 250 Number of phases in a screw cycle: 20 IO Sum counter: 99 Screwdriving Bins: Moment + Angle + Date + Time + Result + (bar code): up to 11600 Screws: 6 Moeliche screw strategies: Torque control with angle control Rotation angle control with torque control Dremoment- / Drehwinkelsteuerung Torque control with rotation angle and gradient control Rotation angle control with torque and gradient control Stretch control Hold torque / position Friction torque test Electricity compatibility 2 x motor cable for hand screwdriver 5 m length Nwjdpfedcmizjx Aa Esr Art.Nr .: 6159170720 1 x Sensor cable length 5 m Art.Nr .: 6159171220 Including operating instructions

Condition: used, Year of construction: 2016, Parts of a screwdriving station. This was only used in test operations. These consisted of two screwdriving units mounted on a robot gripper. The system was used to screw battery components together. Built in 2016, the system was in storage for the past few years and then sold by Audi. The screw used is approximately 72mm long and M6. Rexroth parts (installed twice): 0 608 720 039; i= 6.74; w=85% 0 608 820 113; Type: 3DMC060; 60Nm 0 608 701 017; max. 20,000 rpm; 3~ 0-230V, max. 14A; 0.11Nm/A 0 608 810 021 0608 810 037; Type 3ULG; i=1; efficiency 95% Weber: 1x ZEL 360 conveyor 1x control unit as shown Everything as shown, inspection requested, as it is unclear whether the system is complete. Nsdpfxjwh Nu Ts Aa Ejwr

Condition: used, Pneumatic screwdriver, pneumatic screwdriver DESOUTTER Pneumatic screwdriver, straight screwdriver for screwdriving technology Type SD 140-AR510-S4Q Torque range: 0.6-14.0 Nm Speed: max. 510 rpm Compressed air requirement: 6 bar Air consumption: 8.7 l/s Bit holder: M6 - Rotary switch for clockwise and counterclockwise rotation (rotary ring control) Nwsdefgrrhjpfx Aa Eer - Without screwdriver switch-off - Compressed air control line Ø 4 mm - Compressed air connection for screwdriver function min. Ø 10 mm - Aluminum holder for handling device - Screw feed Ø 12 mm (inner diameter) Dimensions L x W x H 60 x 46 x 870 mm Weight: 2.8 kg good condition 4 pieces available, price per screwdriver

Condition: good (used), Universal screwdriver, construction screwdriver, screwdriver, electronic screwdriver, power screwdriver, electric screwdriver Nedpfofc Hfvsx Aa Ejwr -Nominal power consumption: 600 watts -max. screw capacity: M8 -Speed: 600/1800 rpm -Connection: 220 volts -Number: 34 universal screwdrivers available -Price: per piece -Dimensions: 320/200/H80 mm -Weight: 3.3 kg/piece

Year of construction: 2011, condition: used, machine/vehicle number: 6151656900, Used Desoutter ERS12 electric screwdriver with integrated sensor with connection cable fully functional without any additional accessories Item.No.: 6151656900 suitable for Desoutter CVIR II - screw control Output: Hex 1/4F" Nwjdpfx Aajvtf R As Eor Torque: Min.: 1.5 Nm Max.: 12 Nm Idle speed: 950 rpm Weight: 0.7kg

Condition: good (used), Universal screwdrivers, construction screwdrivers, screwdrivers, electronic screwdrivers, power screwdrivers, electric screwdrivers Njdpfx Aefc Hfxea Ejwr -Nominal consumption: 400 watts -Max. Screw capacity: 10 mm -Connection: 220 volts -Price: per piece -Number: 11 pieces -Dimensions: 420/140/H80 mm -Weight: 4 kg/piece

Condition: like new (used), functionality: fully functional, Year of construction: 2008, operating hours: 1 h, machine/vehicle number: 6151922015, From our demonstration tool inventory, tested and fully functional: Used Chicago Pneumatic Redi Power RP2015 pneumatic pistol screwdriver with shut off clutch with trigger start Output: Hex 1/4" Torque: 2.0 to 5.5 Nm / 18 - 49 in.lb Idle speed: 1470 min-1 Length: 200 mm Weight: 1.0 kg Other tools for industrial production and maintenance on request. Nwjdpfx Asv Im Ncea Eer

Condition: used, pneumatic angle grinder, flex, grinding witch, cut-off grinder, cut-off machine, angle grinder -pneumatic straight screwdriver -Operating pressure: 6 bar -Speed: 900 rpm -Price: per piece -Number: 2 pieces -Dimensions: 380/42/H67 mm Nodpfx Aed Scptja Eswr -Weight: 1.4 kg/piece

Year of construction: 2014, operating hours: 2 h, condition: excellent (used), functionality: fully functional, machine/vehicle number: 6151654200, From our demonstration tool inventory, tested and fully functional: Desoutter E-Lit Premium elektric pistol screwdriver ELS6-1000P without battery with speed adjustment (via optional module) Idle speed: 300 to 1000 min-1 Torque range: 0.8 to 6 Nm / 7.1 - 53 in.lb Output: Hex 1/4" F Length: 215 mm Weight without battery: 0.8 kg Nedpfx Asv Ipclja Eowr Other tools for industrial production and maintenance on request.

Condition: used, hammer drill, chisel hammer, combi hammer, Bosch hammer, cordless hammer drill -Manufacturer: Bauhaus Toolson, cordless drill type PRO-AS 18 Li-1 -incl.: charger and battery -Number: 4x drill drivers available -Price: per piece -Transport dimensions: 240/180/H240 mm -Total weight: 1.9 kg/piece Nwsdsuwgg Dopfx Aa Eer

Year of construction: 2011, operating hours: 7 h, condition: excellent (used), functionality: fully functional, machine/vehicle number: 6151659360, From our demonstration tool inventory, tested and fully functional: Desoutter low-voltage screwdriver SLB012-A2000-S4Q-NE shut-off with push start Idle speed: 1000 / 750 min-1 Torque range: 0.20 to 1.18 Nm / 1.76 to 10.4 in.lb Output: 1/4" Length: 245 mm Weight without battery: 0.83 kg Other tools for industrial production and maintenance on request. Nwedov Ipx Hopfx Aa Eor

Year of construction: 2014, operating hours: 10 h, condition: as good as new (ex-display), machine/vehicle number: 6151656290, Desoutter Battery Angle Screwdriver shut off ELS15-480-A Demonstration tool Charger 230 V Ladegeraet + 2 Batterys (18 V 2,6 Ah) included Nwjdpfxscr H Eae Aa Eer Free speed: 200 to 480 rpm Torque Range: 44,2 in.lb till 133 in.lb Output drive: Sq. 3/8 Length: 16,5 in. Weight (without Battery) : 2,6 lb.