Used Helical Gear Units for sale (37,103)

Condition: good (used), Year of construction: 1987, functionality: fully functional, overall weight: 1,900 kg, total length: 1,690 mm, total width: 1,260 mm, total height: 815 mm, gear ratio: 200, torque: 65,000 Nm, shaft diameter: 200 mm, 2 units of 4-stage industrial gearboxes used in winch applications. Manufacturer: Asug Penig, GDR Type: TGL 34611/10A8-450x200 Year of manufacture: 1987 Maximum torque: 65000 Nm Gear ratio: 200:1 Actual gear ratio: 200.364 Power: n1 950 rpm = 33 kW n1 710 rpm = 24.6 kW Dimensions: Shaft d1: Ø 45 mm x 110 mm Shaft d2: Ø 200 mm x 350 mm Shaft height h1: 400 mm Length: 1690 mm Width without shafts: 560 mm Width with 2x shafts: 1260 mm Height: 815 mm Lredpfxjzw H Hij Ac Ast Weight without oil: 1900 kg (For design A8, the weight increases to approximately 2000 kg) Oil capacity: 68 kg The TGL 34611 series of gearboxes for conveyor systems and hoisting equipment includes three- and four-stage gearboxes with hardened gears. The shafts are mounted in roller bearings. Splash lubrication is used. Spur gears and shafts are positively connected by means of keyways. The external dimensions of the housing for a given size are the same for both the three- and four-stage versions. In the four-stage version, the drive shaft is located below the plane of the components. The housing is made of cast iron. The gearboxes can be operated in both directions of rotation.

Condition: new, Year of construction: 2016, 1 unit of a completely overhauled, unused industrial bevel-helical gearbox from ASUG. TGL 21815. All gearbox parts have been replaced, with the exception of the housing!!! Clutch: 800 mm (only one half available) Maximum torque: 27,829 Nm Gear ratio: i = 1:80 Maximum power: 51 kW Oil capacity: 170 kg Speed: n1 = 1400 Lsdogwlrdopfx Ac Aort Speed: n2 = 17.5 Weight: 1450 kg Shaft diameter d1: 65 mm Shaft diameter d2: 160 mm Shaft height h1: 500 mm Overall height h2: 925 mm Length of base: 1170 mm !! The gearbox does not have an oil cooler !!

Condition: new, Year of construction: 2003, functionality: fully functional, overall weight: 1,760 kg, total length: 2,400 mm, total width: 780 mm, total height: 810 mm, gear ratio: 16, torque: 37,700 Nm, shaft diameter: 90 mm, hollow shaft diameter: 170 mm, 1 unused industrial slip-on bevel-helical gear for conveyor belt drives. Manufacturer: Flender Penig Type: 14LA0-355x16 el380t TGL37088 Rated power: P = 257 kW Torque: 37,700 Nm Ratio: i = 16 (15.8351) Speed n1: 1,000 rpm Speed n2: 62.5 rpm Input shaft diameter: 90 mm x 170 mm Output shaft: Hollow shaft Ø170 mm 0 = Shaft end right 355 = Size 16 = Ratio e = Anti-reverse device (input shaft rotation right) l = Fan 380 = Pump and fan voltage in volts t: 2 TPM resistance thermometer temperature monitors Hydraulic pump: 1.5 kW Fan: 0.75 kW Ledswmlduopfx Ac Aort Dimensions: Length with fan: 2400 mm Width: 780 mm Height: 810 mm Weight with fan: 1760 kg The 14 LA series bevel helical gear units are three-stage gear units with hardened gears and welded housings. The shafts are mounted in roller bearings. The low-speed shaft is designed as a hollow shaft. The torque is transmitted from the hollow shaft to the connecting shaft via cones and keyways. The gear units can be operated in both directions of rotation. The gear units can be mounted on the right or left side without any modification to the gearbox.

Year of construction: 2016, condition: new, 1 piece unused industrial bevel helical gearbox in original packaging Manufacturer: Flender Type: B3SH size: 17 Type: F Maximum torque: 130.000 Nm Gear ratio: i= 25.409 max. power: 800 kW oil filling: 290 liters speed: n1= 1500 1/min Speed: n2= 59.03 1/min weight: 5450 Kg Shaft diameter d1: 1 x 110mm Shaft diameter d2: 2 x 250mm Shaft height h1: 550 mm total height h2: 1290mm Length from base: 1740mm width without shafts: 690mm width with 2x shaft: 1650 mm Gearbox has oil circulation lubrication Ø50mm backstop, Ledpfx Acjmczixj Asrt thermometer, 2x heating element 1800 Watt / 230Volt Dimension of the shipping box length: 2790mm width: 1950mm Height: 1930mm Weight with packing: 6.099kg

Condition: refurbished (used), Overhauled 3-stage bevel-helical gearbox FLENDER, Model: KZA 360, P = 194 kW, n1 = 1,500 rpm, n2 = 60 rpm Lrsdjyhngtepfx Ac Ast

Condition: excellent (used), Year of construction: 1986, functionality: fully functional, overall weight: 1,100 kg, total length: 1,359 mm, total width: 500 mm, total height: 650 mm, gear ratio: 160, torque: 32,000 Nm, shaft diameter: 160 mm, 1 piece, very little used industrial spur gear reducer for conveyor systems, cranes, and lifting drives. This gear reducer was installed on a freight train cable shunting system. However, this shunting system was never used. The gear reducer was stored dry in a winch house. A PDF data sheet is available here under the advertisement description! Manufacturer: Penig / ASUG GDR Type: TGL 34611 / 10A2-355x160 Rated power: P = 21.4 kW Torque: 32000 Nm Gear ratio: i = 160 Actual gear ratio: 152.230 Speed n1: 950 rpm Speed n2: 6.24 rpm Input shaft diameter: 35mm x 80mm Output shaft: Solid shaft Ø 160mm x 300mm The second part of the pin coupling is also available. The bore in this half is 125 mm. !! The pin coupling is not included in the stated selling price !! Dimensions: Length: l4 = 1359 mm Width: b1 = 500 mm without shaft Height: h4 = 650 mm Shaft height: h1 = 315 mm Weight: 1100 kg Lrjdpfx Aozimqrec Ast The gear reducer series includes two-, three-, and four-stage gear reducers with hardened gears. The shafts are mounted in roller bearings. Splash lubrication is used. Spur gears and shafts are positively connected by means of keyways. The external dimensions of the housing of a particular design size are the same for two-, three-, and four-stage versions. In the four-stage version, the drive shaft is located below the parting plane. The housing is generally made of cast iron. The gear reducers can be operated in both directions of rotation.

Condition: ready for operation (used), * Brand: Radicon * Model: worm gear uits * Type: BU 12 * Ratio: 30 : 1 Lrjdpfsywmaxox Ac Ajt

Condition: used, Electric trolley, electric trolley for chain hoist, crane trolley, trolley, rolling trolley For double T-beam STEEL type GU-A035400 Lsdpfx Ajl Ab Rtsc Asrt . 0104671 Year of construction 1986 Load capacity approx. 1100 kg Roller diameter approx. 80 mm track width from 65 mm to 110 mm driving speed 12,5 m/min Motor power 0,42 kW Mains connection 380 Volt, 50 Hz. weight 20 kg good condition

Condition: excellent (used), For sale is a Ponndorf PX 15 peristaltic pump equipped with a Lenze geared motor with smooth speed control. This pump is designed for the precise transfer and dosing of liquids, where the medium only comes into contact with the flexible working hose. This solution ensures the safe pumping of aggressive, viscous, and solid-containing substances. The unit is mounted on a sturdy steel base and is sold as a complete set with the geared motor. The visual condition is as shown in the photos – normal signs of use. Technical data: Pump manufacturer: Ponndorf Handelsgesellschaft mbH Model: PX 15 Serial number: 3284 Pump type: peristaltic (hose) Geared motor manufacturer: Lenze Gearbox type: 11 712 02 10 Lsdezi Hc Iepfx Ac Ajrt Gear ratio: 10:1 Output speed range: 30–166 rpm Torque: 18–32 Nm Motor manufacturer: Hanning Elektro-Werke Motor power: 0.37 kW Supply voltage: 220/380 V Frequency: 50 Hz Protection class: IP54 Country of manufacture: Germany (West Germany) Application: The pump is designed for the transfer and dosing of: adhesives, paints and varnishes, resins, chemicals, detergents, syrups, sludges and sediments, lime milk, suspensions and liquids with fine solid particles. Key advantages: the medium only comes into contact with the working hose, dry running capability, self-priming, gentle pumping without damaging the medium, smooth performance adjustment thanks to the Lenze drive, robust construction made in Germany, easy operation and replacement of the working hose.

Condition: ready for operation (used), Gearmotor, gear unit Dimensions: 930 x 410 x 390 mm Lrsdjukn Inopfx Ac Aot Weight: 196 kg Electrical data: 400 V; 29.5 A; 15 kW Gear unit speed: 182 rpm Motor speed: 1460 rpm

Condition: as good as new (ex-display), 3 Pcs. “UNUSED – SEW R147 DVE280S4” for Sale Ledpsglvvujfx Ac Asrt Also many other Geared Motors on stock. Manufacturer: SEW Eurodrive Type: R147 DVE280S4 Power: 75 kW Voltage: 230 / 400 V Amperage: 240 / 137 A Hertz: 50 Hz Ratio: 8,26 : 1 RPM in/out: 1.480 / 179 Shaft ø out: 110 mm Weight: 887 / 952 kg

Condition: ready for operation (used), Components for the construction of a very large energy water wheel. Gearbox: Flender SFO 500 flange-mounted gearbox Number of gear stages: 4 Gear ratio: 185.63:1 Transmissible torque: 131,300 Nm Speed n1 max.: 1485 rpm Speed n2: 8 rpm Shaft diameter D1: 80 mm Shaft diameter D2: 220 mm 3500 kg without electric motor Dimensions: Length: 2000 mm Width: 800 mm Height: 1000 mm Lrodpfxjh Rrtnj Ac Ast For the shaft / pipe Shaft diameter: 560 mm Pipe wall thickness: 35 mm Bearing distance: 10,000 mm The shaft can be shortened as required by the bolted hubs. Welding is easily possible on the pipe, as it has a wall thickness of 35 mm.

Condition: used, Electric chain hoist, electric lifting mechanism, YALE crane, type 5-10/10-5 Lredpfxod Rnr Tj Ac Ajt Serial no. 8526, year of manufacture 1979 Load capacity: 1000 kg Hook travel: 3 meters Lifting speed: 5 m/min Fine lifting speed: 1.3 m/min 2 load strands = 1000 kg Power supply: 380 volts, 50 Hz - Suspension eye at the top of the crane - Control pendant with buttons for main lift and fine lift in good condition

Condition: like new (used), Manufacturer: Flender Type: K2S-2,5 Backstop: Yes Power: 78 kW Ratio: 44,16:1 RPM in/out: 1.400 / 31,7 Shaft ø in: 65 mm Lsdjg Stz Aspfx Ac Ajrt Shaft ø out: 140 mm

Condition: good (used), Year of construction: 1985, functionality: fully functional, overall weight: 1,450 kg, total length: 1,620 mm, total width: 930 mm, total height: 920 mm, gear ratio: 200:1, torque: 21,400 Nm, shaft diameter: 160 mm, power: 14 kW (19.03 HP), 6 industrial helical bevel gearboxes from Flender / ASUG / Penig TGL 21815 maximum continuous torque: 27280 Nm Gear ratio: i= 200:1 max. power: 14 kW at 1250 rpm 20 kW at 1400 rpm Oil filling: 170 kg Weight: 1450 kg Shaft diameter d1: 40 mm Shaft diameter d2: 160 mm Lodpervg N Dofx Ac Ajrt Shaft height h1: 500 mm Total height h2: 925 mm Also available sprocket 48B3 17 Z and 48B3 35 Z

Condition: new, Gear Units / Gearboxes / Transmissions, Large stock of used and unused gear unit and reducers from manufacturers like Flender, Siemens, Hansen, KSB, WGW, TGW and SALA Different ratio's, sizes, with / without backstop. Please contact us to find a suitable gearbox. Ljdpfxsggfhne Ac Asrt

Condition: good (used), Manufacturer: Siemens Type: DF39-LA71MG4I-L4N Motor number: FDU1601/2294757 001 Power: 0.25 kW Speed: n1 1,350 rpm / 1,650 rpm Speed: n2 16.3 rpm / 20.0 rpm Ledpfx Acjhgbtro Ajrt Shaft diameter: 25 mm Shaft length: 50 mm Mounting flange diameter: 120 mm Bolt circle for clamping screws: 100 mm Weight: 13 kg Dimensions: 550 x 220 x 170 mm Multiple motors available

Condition: excellent (used), 1. DEMAG gearboxes / crane gearboxes – 10 units. Type: AFM 06 – 1 unit Ledpfx Acsyu Sbus Aert Type: AFM 05 – 1 unit Type: AFM 04 – 1 unit (3 units available). Type: AFM 04 – 1 unit Type: ADE 50 DD – 1 unit Type: Bevel gearbox AFW 08 – 1 unit Type: WUK 60 TD – 1 unit Type: P 208 – 1 unit

Condition: new, Manufacturer: Flender Type: B4 FH 10 A Power: 11 kW Ratio: 387,59:1 RPM in/out: 1.500 / 3,87 Bolt distance ø in: 300 mm Bolt distance ø out: 420 mm Lrjdpjg Stz Uofx Ac Ast Weight: 1.140 kg

Condition: new, DOOR DRIVE / MOTOR CONTROL / DOOR GEARBOXES - 11 units: 1. GAROG door drive, type: MD 500 / 30 AD (new). 2. ELKA motor control / controller with remote: Type: M 036 (new). 3. Door drive, type: D - 40 with electrical box – 2 units (new). 4. Door drive, type: A 75/27 AK + RK – 2 units. 5. GAROG door drive, type: DK 110 AC – 1 unit. 6. Door drive 2 units + 2 gearboxes. Lrjdpfxjyv Hp Ro Ac Ajt Door drive, type: STSI 20.24 - 40.00 – 2 units. Gearbox, type: U. 90 60 / 1 – 1 unit. Gearbox, type: (without nameplate) – 1 unit.

Condition: excellent (used), Spur gear motor Manufacturer: Siemens Type: DF38-LA71S4I-L4N Motor number: 8824014/001 2KJ1202-2CD13-9FK1-7 Power: 0.25 kW Speed n1: 1,350 rpm Speed n2: 16.4 rpm Shaft diameter: 25 mm Shaft length: 50 mm Diameter of the mounting flange: mm Bolt circle for clamping screws: 220 mm Weight: 20 kg Dimensions: 550 x 200 x 200 mm Ljdpfx Acjhcgb Sj Aert Multiple motors available. Self-collection possible.

Condition: excellent (used), Year of construction: 1993, functionality: fully functional, Manufacturer: KLINGELNBERG AG Model: KNC 60 Machine type: NC spiral bevel gear cutting machine Year of manufacture: 1993 Machine No.: 383 Weight according to nameplate: 13,000 kg Control/PLC technology: SIEMENS SIMATIC S5 PLC series S5-115U and others Drive technology: BOSCH servo/drive modules Visible Bosch components: including EBM/SM/SPM modules, KM 3300 Operation: KLINGELNBERG CNC control panel + separate machine control panel Work area: fully enclosed Machining principle: bevel gear/spiral bevel gear machining Workpiece mounting: horizontally arranged workpiece spindle Tool side: swiveling/positionable cutterhead/milling unit Additional operation: hand-held control unit/machine pendant available The photos also show two different operating hour counters: 12,089 h Ljdpfxez Ell Ds Ac Aort 88,849 h The machine is in excellent condition and is fully functional at a German company. Super robust design, very accurate results, a brilliant machine.

Condition: good (used), Year of construction: 1998, Max. Pitch circle diameter External gearing 300 mm Max. Pitch circle diameter internal gearing 300 mm Max. Outer diameter of workpiece (equipment) 450 mm max. module 6 gear hobbing width -max. 100 mm Max. Helix angle (with tool Ø 125 mm) +/- 45 ° strokes - infinitely variable 130 - 1300 Hub/min Lodsvu E Nujpfx Ac Aort workpiece weight 1000 kg Minimum distance table top - tool spindle -55 / +300 mm Maximum distance table top - tool spindle 200 mm Maximum distance table top - tool spindle 350 mm Manual Upright side shift +/- 25 mm Manual swivelling angle of the tool spindle +/- 0,5 ° Max. Tool speed 15 UpM Max. Workpiece speed 27 UpM Max. Tool diameter 7 Zoll voltage 400 V frequency 50 Hz Max. Line power 70 A total power requirement 48 kW weight of the machine ca. 11 t dimensions of the machine ca. 4,27 x 3,11 x 2,87 m table hole 40 mm control Siemens Sinumerik 840 C taper in main spindle SK 45 Gleason PFAUTER gear shaping machine Mod. PSA 300 The CNC modular gear shaping machine with skiving cutter for the machining of external and internal cylindrical gears, with straight or helical involute with straight or helical involute toothing, as well as any other profile splitting process. The work cycle is controlled by a CNC unit, with specific software for machining the gears, machining. Field of application --> The PSA 300 has been designed for the production of: - Gears with straight external teeth - Gears with straight internal teeth - Gears with external helical teeth - Gears with internal helical teeth

Condition: ready for operation (used), Year of construction: 1990, functionality: fully functional, machine/vehicle number: 018.0402, gear diameter: 300 mm, controller model: Optronic CNC D140, workpiece width (max.): 2,300 mm, workpiece height (max.): 500 mm, center height: 250 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Gear diameter: 300 mm Module range: 0.5–8 mm Pressure angle: 35° Max. workpiece width: 2,300 mm Max. workpiece height: 500 mm Max. workpiece weight: 100 kg Ljdjzzba Sspfx Ac Ajrt Center height: 250 mm Table length: 2,300 mm Grinding spindle travel: 200 mm MACHINE DETAILS Control system: Optronic CNC D140 Dimensions & Weight Dimensions (L x W x H): 5,900 x 1,300 x 2,000 mm Net weight: 7,500 kg Shipping packages: 5 units

Condition: good (used), adjustable gear motor, variable speed gear motor, electric motor -Manufacturer variable speed gear unit SEW type: R40VU1 -Manufacturer motor SEW type: DFT71D4 -Motor power: 0.55 kW -Speed range: 21-86 rpm -Motor: adjustable -height of the shaft axis: 92 mm -Drive shaft: Ø 25 mm -Number: 2 motors available -Price: per piece Ljdpfx Acecvvywe Aort -Dimensions: 470/220/H370 mm -Weight: 36 kg