Used Spur Gear for sale (7,388)

Year of construction: 2001, condition: good (used), Electric motor Manufacturer Danfoss Year of construction 2001 Type WF-DA90LT-H FCM 315 Type 12 Motor number J369521 Power 1.5 kW Speed 1,500 rpm Speed control range 150 to 3,000 rpm Shaft diameter .... mm Diameter of impeller 40 mm Shaft length mm Shaft diameter 140 mm Bolt circle of clamping screws 110 mm Control unit Csdpshgbtvefx Afnjgn Weight 22 kg Dimensions 340 x 240 x 180 mm several motors available

Condition: used, Permanent magnet brushless servo motor SIEMENS with ALPHA helical gearbox Servo drive, geared motor, servo gear unit Type: 1FT6105-8SF71-3EG1 Serial no.: YF P921 8717 03 001 Year of manufacture: 2002 Rated torque = M₀: 54/65 Nm Rated current = I₀: 36/45 A Max. speed = nₘₐₓ: 4500 rpm ALPHA helical gearbox Type: SP 210-MF2-20 -021-000 Shaft diameter: 75 mm Shaft end length: 105 mm Csdpfxjktdufj Afnegn Centering diameter: 180 mm Centering diameter length: 35 mm Pitch circle diameter: 250 mm / 4 x 17 mm holes Housing dimensions (L/W/H): 725 x 225 x 225 mm Weight: approx. 120 kg Good condition Removed from a fully functional special-purpose machine, tested prior to removal.

Year of construction: 2021, condition: ready for operation (used), Lifting capacity: 52t, drive shaft diameter of the hollow shaft: 245mm, brake shaft dimensions: 100x190mm, drive shaft dimensions: 80x140mm, ambient temperature: -15 to 45°C, center distance: 1105mm, rated power: 275kW. The gear is still unused. An on-site inspection is possible. Cedpfxow Tc Sne Afnogn

Condition: ready for operation (used), Components to build a very large energy waterwheel. Gearbox: Shaft-mounted gearbox Flender SFO 500 Number of gear stages: 4 Transmission ratio: 185,63 : 1 Transmittable torque: 131.300 Nm Speed n1 max.: 1485 rpm Speed n2: 8 rpm Shaft diameter D1: 80 mm Shaft diameter D2: 220 mm 3500 kg without electric motor Dimensions: Length: 2000mm width: 800 mm height: 1000 mm Cedpfx Afjh Rrtnensgn To the shaft / tube Shaft diameter: 560 mm Tube wall thickness: 35 mm Bearing distance: 10000 mm Shaft can be shortened as desired due to the screwed hubs. Welding is possible without problems on the tube because it has a wall thickness of 35 mm.

Condition: excellent (used), functionality: fully functional, Year of construction: 2002, operating hours: 48,651 h, Mazak Space Gear-510 MKII 2.5 kW Year of manufacture December 2002 - after renovation!!! Very good condition! Cgsdpfjwqr Tdox Afnon Meter reading 48651 hours Operating system Fanuc L-64

Condition: excellent (used), functionality: fully functional, Year of construction: 2007, operating hours: 41,417 h, Mazak Hyper Gear 510 4.0 kW Year of production February 2007 Meter reading 41417 hours MAZATROL operating system very good condition Technical data of the MAZAK HYPER GEAR 510 laser cutter - laser power: 4 kW Cgjdpfewqr Twex Afnon - feeds in the X/Y/Z axes: 3070/1545/100 mm - dimensions of the work table (length x width): 3000 x 1500 mm - maximum weight of the workpiece: 930 kg - maximum dimensions of the workpiece (length x width x height): 3050 x 1525 x 25 mm - laser type: CO2

Condition: ready for operation (used), Year of construction: 2001, functionality: fully functional, grinding wheel diameter: 200 mm, workpiece length (max.): 200 mm, TECHNICAL DETAILS Grinding wheel diameter: 100–200 mm Maximum workpiece length: 200 mm MACHINE DETAILS Control: Siemens 840D or equivalent CNC axes: 3–5 axes Drive power: 5–10 kW Coolant tank: 100–200 litres EQUIPMENT Coolant filtration system Universal applicability for different tool types and geometries High flexibility through CNC programming and adaptable clamping devices Process reliability thanks to integrated cooling and filtration system Easy maintenance due to modular design and central supply units Cgedpsya Dy Hjfx Afnsn

Condition: good (used), ⚙️ Mikron Gear Hobbing Machine Type 132-02 (M23) – Mikron is renowned for its robust construction and long-lasting performance in gear hobbing applications, making it an excellent solution for cutting spur gears, helical gears, and splines with reliable precision. Condition Used State Good Maximum diameter 100mm (4") Cedexlabcepfx Afnegn Maximum length 100mm (4") Number of teeth 6-400 Maximum pitch in steel 15 D.P. 12 table revolutions Geometrically calibrated between 200 and 2,400 rpm Feed Horizontal or plunge cut Main motor 1.5 HP Coolant pump motor 0.1 HP Hydraulic system motor 0.1 HP Dimensions 1120x1120x1680mm Machine weight 500kg

Condition: used, David Brown Gear Hobber, with change gears and mandrels. Cgjdpoyb Sfyjfx Afnen

Condition: used, Sunderland No 5 B Gear Planer, Gears, Tailstock, Mandrels. Csdpfx Aeyb Sfgsfnegn

Condition: excellent (used), Year of construction: 2009, Machine-Details: Stock-No. 1022-2352 Type of machine Gear Hobbing Machine - Horizontal Make MONNIER & ZAHNER Type KOEPFER MZ 120 Year of manufacture 2009 Type of control CNC Storage location Monheim (Germany) Country of origin Switzerland Delivery time Immediately Freight basis Ex warehouse, loaded on truck Technical details: Cjdpjyhc Dajfx Afnsgn max. wheel diameter 2-45 mm gear width 250 mm max. module 1,5 mm min. module 0,5 mm Control Fanuc 18i-MB weight of the machine ca. 2,2 t dimensions of the machine ca. 2100 x 1440 x 1700 m Additional information: The combined CNC gear hobbing and worm milling machine KOEPFER MZ 120 is characterized by its flexible usability and is used in the small module area. Just by swiveling the milling spindle from the horizontal to the vertical position and selecting the corresponding operating mode of the CNC control, the worm milling machine becomes a gear hobbing machine and vice versa. CNC control Fanuc 18i-MB (Dialog/ISO) CNC axes = X-axis plunge axis Z-axis longitudinal axis C-axis workpiece spindle B-axis tool spindle V-axis loader axis longitudinal A-axis swivel axis tool spindle head (included as an option) Y-axis shift axis (included as an option) With the following production programs: Worm milling Hobbing Worm hobbing Bevel gear and spur gear milling Bevel gear hobbing Milling cycles = straight, oblique, crowned toothing, radial, radial-axial, co- and counter-rotating milling, roughing, finishing, worm gears, straight-toothed bevel gears, face gearing (option only in the partial process) Worms [Equipment] Coolant tank 300 liters KF with LNS Turbo MS 250 Chip conveyor, built in 2021!!! Kraft and Bauer fire extinguishing system Spiral conveyor Machine documentation [Technical data] Workpieces: Workpiece diameter 2-45 mm Max. workpiece length 250 mm Tooth length 150 mm Max. module in steel= 1 mm (gear hobbing) 1.5 mm (worm milling) 0.5 mm (bevel gear hobbing) Tools: Cutter diameter= 16-32 mm (gear hobbing) 40-63 mm (worm milling) Machine: Max. setting angle of milling head= +/- 45° (gear hobbing) +/- 30° (worm milling) Shift travel= 34 mm (manual adjustment) 34 mm (CNC axis) Collet/retraction mandrel W 20 Max. speed of workpiece spindle 770 rpm. Milling spindle drive 0.55 kW Max. milling spindle speed 8000 rpm Axis drives = X-axis (plunging) / travel 80 mm via CNC Z-axis (longitudinal feed) / travel 190 mm via CNC C-axis (workpiece axis) via CNC Rapid traverse = X-axis 6000 mm/min. Z-axis 6000 mm/min. Hydraulic unit 0.37 kW

Condition: used, Year of construction: 2004, Technical details: max. wheel diameter: 200 mm gear width: 60 mm max. module: 7 weight of the machine ca.: 15 t table diameter: 180 mm table turning speeds: 100 U/min hob turning speeds: 750 U/min Machine in good condition, without feed, without automation Available 24.08.2024 Cedpfoxc E H Ssx Afnsgn *

Year of construction: 1963, condition: used, max. wheel diameter 2000 mm gear width 0 mm max. module 0 Weight ca 700 kg dimensions of the machine ca. 2x1,2x1,5 m Cedped Ngrpjfx Afnjgn uncomplete machine body with drive motor. drive unit fully functional. Without grinding unit.

Condition: used, max. wheel diameter 0 mm gear width 0 mm max. module 40 min. module 1 weight of the machine ca. 0,05 t Cedpfsvn Unyjx Afnogn dimensions of the machine ca. 0,5x0,3x0,3 m pitch and run-out tester unit for gear measuring machines.

Condition: used, Year of construction: 1959, total height: 1,900 mm, total width: 2,200 mm, total length: 1,500 mm, Empty weight: 2.500 kg Price: On request - Year: 1959 - Documentation available: Yes - CE certificate present: No - Serial number: 80 - Motor power: 5.0kW - Transport dimensions: 1500mm x 2200mm x 1900mm (l x w x h) - Transport weight [kg]: 2500kg - Transport packages [pcs.]: 3 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Cgjdpfx Aewniikefnsn Lukas van Rossum

Condition: good (used), Year of construction: 1975, max. wheel diameter 630 mm gear width 425 mm table hole 125 mm clamping table 550 mm max. module 10 axial-feeds 0,40 - 6,80 mm/U radial feeds 0,10 - 1,76 mm/U dist. cutter spindle - workpiece spindle 50 - 425 mm no. of teeth min. 8 milling cutter dia. x width 192 / 215 mm shifting 200 mm main drive motor 7,5 kW total power requirement 22,5 kVa weight of the machine ca. 8,2 t Machine equipment: - Universal milling head with tangential displacement - Pressure reducing valve for counterholder - Magnetic chip transport --> Working range Largest module to be milled (in steel 600 N/mm²): 10 mm --> Straight gear teeth: --> Largest workpiece diameter: 630 mm --> Largest axial slide travel (Z-axis): 425 mm --> Smallest number of teeth to be milled: 8 --> Dimensions Diameter of workpiece table: 550 mm --> Diameter of table bore: 125 mm --> Diameter of workpiece mandrel: 36 mm --> Largest milling cutter that can be clamped: --> Diameter: 192 mm --> Width: 220 mm --> Diameter of milling cutter mandrels: 32 mm --> Centre distance between milling cutter and workpiece: Codow A Am Sspfx Afnsgn --> Maximum distance: 425 mm --> Minimum distance: 50 mm --> Drive taper for cutter mandrels: Morse taper 5 --> Maximum cutter displacement: 200 mm --> Speeds and feeds Cutter speeds: 45 - 280 rpm --> Axial feed (Z axis): 0.40 - 6.30 mm/rev --> Radial feed (X axis): 0.10 - 1.60 mm/rev --> Tangential feed (Y axis): 0.14 - 2.24 mm/rev Translated with (free version)

Condition: excellent (used), max. wheel diameter 600 mm gear width 250 mm max. module 10 min. module 1 weight of the machine ca. 0,9 t Cgedpfxjx N Nc Tj Afnon dimensions of the machine ca. 1,8 x 1,4 x 1,4 m

Condition: ready for operation (used), Year of construction: 2006, max. wheel diameter 150 mm gear width 100 mm max. module 3 min. module 1 ical angle +/- 45 ° slide stroke 100 mm number of teeth 5 - 150 clamping length max. 350 mm control Siemens 840 D rated capacity 38 kVA dimensions of machine 2,45 x 2 x H = 2,5 m weight of the machine ca. 8 t Csdpfx Afjygm Ruonogn

Condition: used, total height: 1,200 mm, total width: 1,200 mm, total length: 4,000 mm, Empty weight: 4.000 kg Cjdpfxswnib Te Afnegn - Documentation available: No - CE certificate present: No - Transport dimensions: 4000mm x 1200mm x 1200mm (l x w x h) - Transport weight [kg]: 4000kg Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, machine/vehicle number: 27506, Complete overhaul in 2009 Cgsdpfx Asxtpg Rofnen CNC gear hobbing machine Pfauter PE 150 Serial number: 27 506 Year of manufacture: 1991 – complete overhaul in 2009 CNC control: SINUMERIK 840 D

Condition: used, Technical details: max. wheel diameter: 46 mm Codsx H Swbepfx Afnegn max. module: 1 weight of the machine ca.: 0,5 t

Condition: good (used), machine/vehicle number: WDB9323361K983197, mileage: 412,928 km, power: 302 kW (410.61 HP), first registration: 07/2006, fuel type: diesel, tire condition: 50 %, axle configuration: 8x8, fuel: diesel, brakes: engine braking, color: other, driver cabin: day cab, gearing type: mechanical, emission class: euro4, suspension: steel, total length: 9,000 mm, total width: 2,500 mm, total height: 3,500 mm, Year of construction: 2006, Equipment: ABS, air conditioning, differential lock, electric window regulation, = Additional options and accessories = - 1 fuel tank - Airbag - Armrest - Day Cabin - Drum brakes - Front suspension: Leaf - Hub Reduction - Hydraulics - Open roof - PTO - Rear suspension: Leaf - Sper - Thick Axles - Tipping hydraulics = More information = Axle configuration Tyre profile: 50% Brakes: drum brakes Suspension: leaf suspension Front axle 1: Differential lock; Steering; Reduction: hub reduction Front axle 2: Differential lock; Steering; Reduction: hub reduction Rear axle 1: Double wheels; Differential lock; Reduction: hub reduction Rear axle 2: Double wheels; Differential lock; Reduction: hub reduction Functional Tipper: Back Cgedoyft E Aspfx Afnen Condition Technical condition: good Visual appearance: good

Condition: used, Make: PRÄWEMA, Model: 205HS2-2 / Synchrofine, Year of manufacture: 2008, Machine no.: 077238, Control unit, Manufacturer: Rexroth Indramat, Type: System 200 BTV20, including handheld operation terminal, Workpiece diameter: Ø 95mm, Maximum workpiece length: 59mm, Maximum spindle speed C-axis (workpiece spindle): 6,000 rpm / 7,000 rpm, B-axis (tool spindle): 2,000 rpm, Maximum feed rates Z/X: 60 m/min, Honing head ZNG-No.: 416101804-8, Year: 2008, Serial no.: 221, Machine bed granite, Manufacturer: Eckbert Reitz, Type: HFSL204HS2, Year: 2008, Workpiece automation, Surface finish inspection unit, Oil drip tray, Pump, Manufacturer: Brinkmann, Type: TH160/350-001, Operating hours as of 18.11.25: 69,518 +++ Attention: This item is part of an online clearance sale! +++ Cjdpfxox Ahc Ne Afnogn

Condition: used, Year of construction: 1997, Technical details: max. wheel diameter: 5 - 350 mm max. module: 20 weight of the machine ca.: 0,8 t min. module: 0,5 dist. between centers: 5 - 750 mm table diameter: 260 mm z-axis: 600 mm y-axis: 185 mm Codox Uzvvspfx Afnsgn max. helix angle: 45 °

Condition: used, Year of construction: 1988, weight of the machine ca. 5 t working width max. 300 mm 6 extensive accessories viele Wechselräder +++++ Please note: Cjdpfx Ajvrk Ecofnegn The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++