Powder feeder, screw conveyor

Condition: defective spare-parts repository (used), Year of construction: 2007, functionality: not functional, grinding length: 3,150 mm, grinding width: 800 mm, table load: 6,000 kg, grinding spindle motor power: 22,000 W, workpiece height (max.): 650 mm, No minimum price – guaranteed sale to the highest bidder! Bcsdpfxoylk E Ho Aa Uow TECHNICAL DETAILS Grinding length: 3,150 mm Grinding width: 800 mm Max. workpiece height: 650 mm Table surface dimensions: 3,150 x 600 mm Magnetic chuck dimensions: 3,000 x 600 mm Grinding wheel dimensions: 450 x 100 x 127 mm Max. table load: 6 t MACHINE DETAILS Control system: SIEMENS 840D Total power requirement: 70.6 kW Spindle power: 22 kW Dimensions & Weight Installation space required: approx. 11 x 3 x 2.4 m Machine weight: approx. 15 t EQUIPMENT Coolant system 2,500 l Magnetic holding force regulation Semi-automatic balancing system Note: The control unit boots up, but the MININI grinding software does not load for unknown reasons. The control hardware has been checked and is in order. Backup files are available.

Year of construction: 2015, condition: refurbished (used), Overband plate magnet Version in VA 1.4301 tightly welded Bcodpfx Ajd Dy U Rea Usw 620 x 420 x 200mm completely welded housing Ring eyelets for suspension

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: H-H20140, travel distance X-axis: 610 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 610 mm, rotational speed (max.): 15,000 rpm, number of slots in tool magazine: 24, TECHNICAL DETAILS X-axis travel: 610 mm Bcodpfxjylk Eye Aa Ujw Y-axis travel: 510 mm Z-axis travel: 610 mm Table size: 760 mm x 510 mm System: SK40 Speed: 15,000 rpm MACHINE DETAILS Machine weight: 4,700 kg Control: Ultimax EQUIPMENT 24-position tool changer Internal coolant supply (IKZ) Chip conveyor Electronic handwheel

Condition: ready for operation (used), Year of construction: 2020, functionality: fully functional, machine/vehicle number: 286.001.911.20, working width: 3,000 mm, working length: 6,000 mm, controller model: Global Control S mit 15 Zoll Farb-Touchscreen, No minimum bid – guaranteed sale to the highest bidder! TECHNICAL DETAILS Working area: 3,000 x 6,000 mm Number of cutting torches: 2 Gas flow regulation: available MACHINE DETAILS Installation footprint: 9,000 x 5,000 x 2,000 mm Control: Global Control S with 15-inch color touchscreen Electrical Data Voltage: 3 x 400 V PE/N Frequency: 50 Hz Power: 9 kVA ATTENTION: The Zinser cutting bed is not included in the offer! EQUIPMENT according to the original invoice – details provided without guarantee Joystick and handwheel for Global Control S panel Cooling system for the control cabinet Laser diode Heat shield plate without air cooling Track for double-sided longitudinal drive HEB 9 m OmniFlow oxy-fuel supply up to 70 m³/h ALFA machine cutting torch with internal ignition SmartLifter 200 SensoMat ARKI Bodpfeyi Ub Hex Aa Uecw Full gas addressability Light barrier systems Safety device: wheel arch foot switch Energy supply via 9 m energy chain for oxy-fuel Drag chain driver Further technical data from the manufacturer – details provided without guarantee: Track gauge: 4,000 mm Chain height: 500 mm Positioning speed: 50 m/min Operating speed: max. 35 m/min Dimensions & Weight Dimensions (L x W x H): 1,940 x 5,070 x 1,980 mm Machine weight: 2,200 kg

Condition: good (used), Industrial robots Manufacturer: Kuka Model: KR6, KR6-2, KR6arc Model: KR16L6, KR16L6-2, KR16, KR16-2, KR16-2 S, KR16-2 F All models equipped with KRC2ed05 controller Kuka KR6 KRC2ed05 Year of manufacture 2006 Kuka KR6-2 KRC2ed05 Year of manufacture 2011 Kuka KR6arc KRC2ed05 Year of manufacture 2006-2007 = several units in stock Kuka KR16L6 KRC2ed05 Year of manufacture 2009 Bjdpfxjtuc U Rj Aa Uocw Kuka KR16L6-2 KRC2ed05 Year of manufacture 2011 Kuka KR16 KRC2ed05 Year of manufacture 2007-2009 = several units in stock Kuka KR16-2 KRC2ed05 Year of manufacture 2010-2012 = several units in stock Kuka KR16-2 Speed KRC2ed05 Year of manufacture 2012 = several units in stock Kuka KR16-2 Foundry KRC2ed05 Year of manufacture 2012

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 516220V00315, Year of construction: 2019, operating hours: 6,239 h, load capacity: 1,600 kg, lifting height: 3,180 mm, free lift: 150 mm, mast type: duplex, Equipment: sideshift, TECHNICAL DETAILS Load capacity: 1,600 kg Load center: 500 mm Load distance: 374 mm Wheelbase: 1,319 mm Lift height: 3,180 mm Free lift: 150 mm Length incl. fork back: 1,861 mm Fork thickness: 40 mm Fork width: 80 mm Fork length: 800 mm Fork carriage width: 980 mm Axle load with load front/rear: 4,160 / 565 kg Bjdpfoyia Hfox Aa Uocw Axle load without load front/rear: 1,500 / 1,625 kg Ground clearance with load under mast: 290 mm Ground clearance at wheelbase center: 114 mm Working aisle width pallet 1,000 x 1,200 crosswise: 3,186 mm Working aisle width pallet 800 x 1,200 lengthwise: 3,311 mm Turning radius: 1,487 mm Minimum pivot distance: 1,487 mm Mast height retracted: 2,160 mm Mast height extended: 3,742 mm Height over overhead guard: 2,035 mm Seat height: 1,058 mm Coupling height: 473 mm MACHINE DETAILS Dimensions & Weight Dimensions: 2,661 x 1,099 x 2,160 mm Own weight incl. battery: 3,125 kg Mast height extended: 3,742 mm Height over overhead guard: 2,035 mm Seat height: 1,058 mm Coupling height: 473 mm Voltage: 48 V Capacity: 625 Ah Operating hours: approx. 6,239 h EQUIPMENT UVV 04/26 Battery charger Side shifter Seat with seat heating Blue Spot front and rear LED headlights: 2x front, 1x rear Front windscreen with wiper Panorama roof Digital display Interior mirror Operating manual Note: The upholstery is worn.

Condition: ready for operation (used), Year of construction: 2012, functionality: fully functional, total length: 90,000 mm, travel distance X-axis: 2,600 mm, travel distance Y-axis: 4,000 mm, table length: 4,000 mm, table width: 2,600 mm, TECHNICAL DETAILS Travel distance X-axis: 2,600 mm Travel distance Y-axis: 4,000 mm Table length: 4,000 mm Table width: 2,600 mm Maximum glass weight: 260 kg Glass thickness: 4 - 10 mm Bcsdpfx Aoyk S Uyoa Uew MACHINE DETAILS Cycle time: 10 pieces/hour Cabin type: SUP-E2-D107/20000 + "D" Total production line length: 90 m Installed power: 1,100 kW EQUIPMENT Loading station with lifter Vertical inlet conveyor WM Vertical washing machine with dryer Vertical inspection conveyor with activation section Tilting table with horizontal transport and vertical inspection Pre-heating section Powder section with belt cleaning Cleaning conveyor Cooling section Tilting table with vertical and horizontal transport Vertical inspection station Unloading station Electrical distribution Deionized water system for the washing machine supply The ovens that may be visible in the pictures are not included in the scope of sale and delivery.

Condition: used, SPE Renergi Low Temperature Dryer. Bedpfx Aowp Rqfea Uecw The Renergi Dryer is used for drying of sawdust and other materials for production of biofuels. The dryer can dry sawdust, bark or wood chips from a humidity level of about 50% to a level of approximately 10 %. This low-temperature dryer utilizes warm (or hot) water from a recommended temperature of 65°C and higher. Maximum water temperature - 110°C. Power supply safety: The dryer must only be fed by 3x400 V AC (630 A) 50/60 Hz with a separate Protective Ground conductur. Power supply Data: • Voltage 400 V AC, three phase • Recommended fuses in supply line: maximum 3x630 A • Typical power consumption: 200kW The dimension of the Dryer are roughly 17,4 by 5,7 meters, with a height of 10,7 meters. The floor space required is approximately 21,4 by 8,0 meters. A ceiling height of at least 15 meters (or 4 meters above the top of the media inlet). Air supply: at least 24 kg gas/s fresh air is required for the operation of this machine. This corresponds to 20nm3/s, or 72 000 nm3/h. Airflow: max 200 liter/min Air pressure: min 4,5 bar, recommended 6,0-8,0 bar Water supply: hot water supply, with a flow of 32 dm3/s. Water pressure: min 1.5 bar, max 6.0 bar Operating temperature range: • Incoming air temperature: -20°C to 50°C • Relative humidity: 0% to 60% Raw material/media: • Relative humidity: 45% to 55% by wieght • Requested relative humidity: 8% to 15% in the dried material Capacity: • The dual-cell, 4 m wide dryer can typically handle 2400 kg of material with a moisture content of 55% by weight in each load • The dryer is capable of drying 6000 kg raw material, with a water content of 55% to 10% in approximately one hour. SRE’s dryer is desinged in accordance with European directives. The equipment is designed to conform to the essential requirements of: • The Machinery Directive 2006/42/EC • LVD 2006/95/EC • EMC 2004/108/EC The dryer is located in Straupe parish, Cēsis district, LV-4152, Latvia. Available for viewing on working days, 08:00 to 17:00, by prior agreement on the viewing time. The dryer is already dismantled All electrical schematics, manual, operating instructions available Upon request, we can provide a contact person with this type of working dryer for consultation Price:20,000.00 EUR (VAT is not included)

Condition: ready for operation (used), Year of construction: 2005, functionality: fully functional, travel distance Z-axis: 185 mm, workpiece length (max.): 3,000 mm, workpiece width (max.): 1,500 mm, TECHNICAL DETAILS Maximum glass dimensions: 1,500 x 3,000 mm Bsdpfx Aoyk S I Hja Uecw Z-axis travel (vertical): 185 mm Work table: 3,250 x 1,620 mm

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, year of last overhaul: 2022, The machine was completely overhauled in 2022! TECHNICAL DETAILS Variable angle: 0-45° Bedpfxoyk Stpo Aa Uecw

Year of construction: 2024, condition: new, Overband plate magnet with cleaning mechanism execution in VA 1.4301 tight welded incl. drawer for cleaning dimensions: 800x500x180mm 4 - pieces M16 eyebolts on the backside These two lifting magnets were used by one of our customers as "police magnet" in the meat processing industry. Both overband magnets are in a perfect condition. The mentioned price refers to 1 piece. Currently still 2 pieces available from stock! All information without guarantee, only while stocks last! conveyor belt, conveyor belt system, discharge belts, belt conveyor, magnetic separator, overbelt magnetic separator, recycling, wood chips, plastic, metal-free metal detection, neodymium, overbelt magnet, magnetic belt separator Our core competence is to deliver exactly what the customer needs. Together with our customers, we work out customer-specific, individual solutions and deliver corresponding systems from our own production. Please contact us by phone to find a suitable solution for your application. Bcodpfxehfwmdo Aa Ujw Overband plate magnet Execution in VA 1.4301 tightly welded incl. drawer for cleaning 420 x 420 x 200mm 420 x 420 x 250mm 620 x 420 x 200mm 620 x 520 x 200mm 800 x 500 x 200mm 800 x 520 x 250mm completely welded stainless steel housing to protect the magnetic core ring eyelets for suspension Cleaning drawer for easy removal of accumulated impurities. Mounting via

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: 112672, total length: 6,700 mm, working height: 840 mm, workpiece weight (max.): 350 kg, controller model: RS150, workpiece height (max.): 35 mm, TECHNICAL DETAILS Processable glass thickness: 3-35 mm Processable dimensions (with corner bevel 15 mm) min.: 45 mm Processable dimensions (without corner bevel) min.: 35 mm Permissible weight per conveyor meter max.: 200 kg/m Total load: 350 kg Working speed: 0.5-5 m/min Pneumatic feed pressure: 6 bar Water tank capacity: 360 L MACHINE DETAILS Bcedjyk Spwspfx Aa Uew Control system: RS150 Total installed power: 16.5 kW Pneumatic feed pressure: 6 bar Water tank capacity: 360 L Dimensions & Weight Dimensions (L x W x H): 6,700 x 1,300 x 2,300 mm Height of working level: 840 mm Total weight (with empty water tank): 2,600 kg EQUIPMENT NC with automatic speed adjustment ABS covers for sound insulation and safety Multi-functional NC Centralized lubrication Adjustable glass removal rate Front adjustment of the rear arrising wheel Stainless steel housing and tanks CN 23 operator interface Programmable logic controller (PLC) integrated in NC Liquid crystal display (LCD) Control keypad with sensitive keys

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: 806, overall weight: 4,600 kg, workpiece weight (max.): 2,000 kg, workpiece height (max.): 55 mm, number of spindles: 13, TECHNICAL SPECIFICATIONS Glass thickness: 3–55 mm Minimum glass size: 35 x 150 mm Maximum glass weight: 2,000 kg Speed: 0.3–5 m/min Bsdpfxsyk Skzj Aa Uecw Number of spindles: 13 MACHINE DETAILS Power: 26 kW Operating pressure: 8 bar Voltage: 400 V Frequency: 50 Hz Dimensions & Weight Dimensions (L x W x H): 9,590 x 1,350 x 3,700 mm Machine weight: 4,600 kg

Year of construction: 2018, condition: new, machine/vehicle number: DMPMFG200x200, Magnetic filter grid in housing / cabinet construction V2A quality (for free-fall applications to investigate dry and free-flowing bulk solids) Magnetic grid 200x200mm High-quality cabinet construction completely closed Easy cleaning by pulling out the magnetic cores High quality magnetic filter rods completely closed Magnet NdFeB N45, Br 8500 Gauss Tmax 80 ° C 4x M10 threaded rod incl. Wing nut as clamping unit Guide rod center: Entrance level right Outlet below Bcsdjdtdwajpfx Aa Uow

Year of construction: 2012, condition: ready for operation (used), functionality: fully functional, total length: 10,200 mm, total height: 2,600 mm, workpiece length (max.): 4,000 mm, The washing machine consists of the following components: Pre-wash zone Washing zone Rinse zone Acid zone Drying Bjdsyk Sgvepfx Aa Uocw Silane application TECHNICAL DETAILS Maximum length of sheets to be washed: 4,000 mm MACHINE DETAILS Total length: 10,200 mm Total height: 2,600 mm