Used Wood Shaving Bedding for sale (10,428)

Condition: ready for operation (used), Year of construction: 2007, operating hours: 1,100 h, functionality: unexamined, overall weight: 2,200 kg, number of blades: 42, rotor diameter: 260 mm, WEIMA WL 6 – Single-shaft shredder for wood waste, year of manufacture 2007, only approx. 1,100 operating hours. For sale is a used WEIMA WL 6 single-shaft shredder (wood shredder/chipper) from WEIMA Maschinenbau GmbH, Ilsfeld. The machine comes from a running production facility and is in good overall condition, considering its age. Iisdpfx Aoy U Nu Tja Ioc Special feature: The operating hour meter shows only approx. 1,100 hours – with a year of manufacture of 2007, this corresponds to an average usage of only around 60 hours per year. Rotor, bearings, and drive train are therefore expected to show very little wear. The machine is equipped with a conveyor belt feeding unit that automatically feeds the material. The top deck is removable – operation is also possible by manual feeding. The separate control cabinet is fully included and professionally installed (Moeller/Eaton contactors, motor protection switch, safety relay, Siemens S7-200 basic PLC). The machine has not been put back into operation after being removed from the production facility. Inspection in Lennestadt (North Rhine-Westphalia) is possible at any time by appointment. Technical data: Manufacturer: WEIMA Maschinenbau GmbH, Ilsfeld Model: WL 6 Year of manufacture: 06/2007 Operating hours: approx. 1,100 hours (meter reading) Motor power: 18.5 kW Voltage: 400 V / 50 Hz Rotor speed: 90–100 RPM Rotor diameter: 260 mm Rotor length: 800 mm Max. number of knives: 42 pcs. Knife size: 40 mm Screen hole diameter: approx. 14.5 mm (measured) Particle size: 10–60 mm adjustable Feed opening: 800 x 1,250 mm Extraction nozzle: Ø 200 mm Length: 2,390 mm / Width: 1,390 mm / Height: 1,840 mm Weight: approx. 2,000 kg Feeding: Conveyor belt feed (top deck removable) Control: Control cabinet with Siemens S7-200, Moeller/Eaton contactors, safety relay More pictures on request.

Condition: good (used), Year of construction: 1991, power: 22 kW (29.91 HP), suitable for pallets or other residual material Rotor width = working width 98 cm Ijdpfx Ajt Tvk Aja Ijic 22 kw motor with discharge auger

Year of construction: 2021, condition: reconditioned (used), Aluminum angled conveyor belt for shredder 2000mm flat + 2000mm incline Dim: approx. 3000 x 420 x 105mm Aluminum construction: Conveyor belt width with corrugated edge PVC- conveyor belt conveyor belt green, 2-ply especially crosswise stable endless welded with step connection * antistatic due to threads in the fabric of the running side Iijdpfoff Hgbsx Aa Iec drive: motor approx. 0,55Kw, speed 0,3m/sec. * controllable with frequency converter connection 220/400V, 50Hz protection class IP54 drive, motor control optional

Year of construction: 2019, condition: new, Aluminum flat conveyor belt without substructure 3000mm flat Dim: approx. 3000 x 500 x 105mm Aluminum construction: Conveyor belt width incl. corrugated edge 500mm Iedpfxeff Hf Ds Aa Isic conveyor belt green, 2-ply especially crosswise stable endless welded with step connection * antistatic due to threads in the fabric of the running side drive: motor approx. 0,25Kw, speed 0,3m/sec. * controllable with frequency converter connection 220/400V, 50Hz protection class IP54 drive, motor control optional

Year of construction: 2021, condition: new, machine/vehicle number: 2021102613, Aluminum angled conveyor belt with substructure Conveyor length: 2000mm flat + 2200mm rising Pitch angle in bend 45°C Discharge height: approx. 1800mm Height of the horizontal top edge 200mm PU conveyor belt Conveyor belt EM 9/2 0+05 PU petrol matt Belt width 500mm Iiodpfx Aoh Eld Eoa Iec 21 pcs. T30 studs welded - pitch 310mm * antistatic due to threads in the fabric on the underside endlessly welded with stepped finger connection 40mm sidewall high-frequency welded on both sides * edge-free zone on both sides for tape guidance in the incline Full-surface underlay sheet Drive: Motor approx. 1.1KW Belt speed approx. 0.4m/sec * optionally controllable with frequency converter Connection 220/400V, 50Hz protection class IP54

Year of construction: 2019, condition: refurbished (used), Overband plate magnet Version in VA 1.4301 tightly welded 420 x 250 x 100mm completely welded housing Iiodpfxed Dzahj Aa Ijc Ring eyelets for suspension

Year of construction: 2023, condition: new, Complete solution for transporting bulk goods such as wood chips, wood pellets, shredded goods, granulate, etc. Aluminum angled conveyor incl. substructure horizontal area 1.500mm(customizable) Rising range 3.000mm (customizable) Infinitely adjustable angle in the kink Feed height: horizontal (individual) Discharge height individually adjustable Construction: height adjustable ( to move) Conveyor belt width 600mm (customizable) We supply our conveyor belts in PVC, PU, felt or rubber. We always have various systems of this type in stock. The delivery time for an individual system is currently around 3-4 weeks, depending on the production effort. Isdjk S Dw Eepfx Aa Ijic Our core competence lies in supplying the customer with exactly what he really needs. Together with our customers, we work out customer-specific, individual solutions and supply corresponding systems from our own production. Feel free to contact us by phone to find a suitable solution for your application. Conveyor belt, conveyor belt system, discharge belts, belt conveyor, magnetic separator, overbelt magnetic separator, recycling, wood chips, plastic, metal-free metal detection, neodymium, overbelt magnet, magnetic belt separator

Condition: used, Year of construction: 2004, operating hours: 31,350 h, Bed milling machine Brand: ANAYAK Iisdpfxoy Uy Ecs Aa Ijc Model: VH Plus 4000 Year of manufacture: 2004 Spindle hours: approx. 31,500 hours Control system: Heidenhain 530 Table size: 4200 x 1100 Travel distances: x: 4000, y: 1200, z: 1500 mm Max. spindle speed: 5000 rpm Max. feed rate: 10000 mm/min Collection point: Bremen The machine is in daily use, so operating hours will continue to accrue. An inspection can be arranged at any time. Disassembly, loading, etc. is the responsibility of the buyer. A 2-ton forklift and a 5-ton overhead crane are available for "small parts". _____ Our general terms and conditions apply. In addition, the seller is not liable for typing or data transmission errors. The appearance of the offered items corresponds to their age and the images shown. The technology and wear of the offered items are consistent with their age. Used machines are sold exclusively to businesses and without any warranty.

Condition: used, travel distance X-axis: 2,500 mm, travel distance Y-axis: 900 mm, travel distance Z-axis: 1,200 mm, X-AXIS TRAVEL: 2500 Y-AXIS TRAVEL: 900 Z-AXIS TRAVEL: 1200 TABLE DIMENSIONS: 2700 X 900 Ijdozdkbwopfx Aa Isic SPINDLE SPEED: 4500 RPM TOOL CHANGER: 40 POSITIONS AUTOMATIC HEAD CNC HEIDENHAIN TNC 430 COOLANT THROUGH SPINDLE

Condition: like new (used), Year of construction: 2021, machine/vehicle number: 1000042824, We are offering for sale a very well-maintained Biesse BREMA EKO 2.2 machine from 2021. The machine includes tool changing, two drilling units, and a set of tools. Software: bSolid. Iiedozcrfpspfx Aa Ioc The machine has been serviced by our technician, so we are very familiar with its condition and history. The machine can be tested at our showroom in Brno.

Condition: good (used), Code: 0369 Brand: ISVE Model: 25/66 Rotary blade grinder for wood scraps, plastics, packaging, nut shells, fruit stones and pits, leather scraps, wood bark, loppings of trees, and other materials Motor Hp 7,5 (Kw 5,5) Iisdpfx Aasy Hqn So Isc Inlet opening diameter mm 250 x 660 It can be connected to a dust collector using a tube placed under the screen Overall dimensions: mm 930 x 770 x 1800 h Weight kg 680

Condition: ready for operation (used), Year of construction: 2003, operating hours: 1,500 h, functionality: fully functional, machine/vehicle number: 3K 13/60, fuel type: electric, pre-crusher was used to pre-crush pallets after which they were turned to the right fraction in another shredder. Satrind can still be seen working and can be used immediately. Iijdeu Abkhjpfx Aa Iec power 44 KW is 60 HP

Condition: as good as new (ex-display), Demonstrator with 7 operating hours Another machine available immediately (ex works in Neckartailfingen) MRZ 830 Shredder Custom tariff number: 84659600 Feed opening 800 x 1000 mm Motor: 18.5/22 kW; 400 V - 50 Hz - 3 ph Blades: multi-rotatable Hydraulically operated slide gate Iisdpfxov Sqrpe Aa Ijc Screen perforation of your choice (10 - 40 mm) Weight approx. 1,600 kg Dimensions (L x W x H) approx. 2,290 x 1,420 x 1,750 mm Turbo clutch Included as standard: - Automatic star/delta start-up - Fast hydraulics - Auto. OFF when the rotor is idle - Speed 70-90 rpm for high throughput - Cycle control to avoid idle times - Performance-enhancing step control of the hydraulic slide - Pertinax guides for the hydraulic slide - Vibration-damping machine feet - CE compliant . The shredder is designed for shredding natural wood, particle board, and MDF, as well as other materials after testing and approval by the manufacturer. Included: - Raise the shredder by 30 cm (prepared for conveyor belt) Additional shredder options: - Articulated conveyor belt + €8,770 net Horizontal section: 1,200 mm Rising section: 2,500 mm Angle: adjustable from 0-60 degrees Discharge height: approx. 2,000 mm + - 100 mm - Overbelt magnet + €6,780 net - Conveyor belt and overbelt magnet control + €2,750 net (Start and stop synchronized with the shredder) Raw material requirements: - The moisture content (dry) must be below 30% - Metals and mineral contaminants such as sand, stones, etc. lead to increased wear

Condition: like new (used), functionality: fully functional, Year of construction: 2025, operating hours: 55 h, Machine with special rotor available immediately Advantages: + special rotor with reduced blade overhang, suitable for hard and soft materials + 22 kW motor + effective square blades *for pallets: up to a maximum of 10 pallets per hour *dependent on screen size and material. With smaller wood residues, significantly more. Motor: 22 kW; 400 V - 50 Hz - 3 phase, Iodex Af Rdspfx Aa Isic Screen: 15/20 mm or as agreed (10 to 40 mm possible) hydraulically operated slide Screen opening currently (15/20 mm) *can be exchanged Extraction nozzle Ø 200 mm. Feed opening 1000x1000 mm Dimensions: 2000x1800x1645mm Example image above: color of the system may vary Weight: 1920 kg. Included as standard: - Control cabinet with PLC control - automatic star/delta start - fast hydraulics - auto. OFF when the rotor is idle - speed 70-90 rpm for high throughput - cycle control to avoid idle times - performance-enhancing step control of the hydraulic slide - Pertinax guides for hydraulic slide - vibration-damping machine feet - CE compliant The following options are available at an extra cost: - Raise shredder by 30 cm (preparation for conveyor belt) + €2,480 net - Inclined conveyor belt (discharge height approx. 220 cm) + €12,980 net - Overband magnet + €6,980 net - Control for conveyor belt and overband magnet + €2,750 net (Start and stop synchronized with the shredder) - extended feed hopper 1500x1500 mm + €3,480 net Requirements for the raw material: - The moisture content (as received) must be below 25% - The feed must be free of metals and mineral contaminants. Damage to the tools and/or increased wear may result.

Condition: new, Year of construction: 2026, Delivery time approx. 3-4 months MRZ 830 Shredder Custom tariff number: 84659600 Feed opening 800 x 1000 mm Motor: 18.5/22 kW; 400 V - 50 Hz - 3 ph Blades: multi-rotatable Hydraulically operated slider Screen perforation of your choice (10 - 40 mm) Suction nozzle Ø 200 mm Weight approx. 1,600 kg Dimensions (L x W x H) approx. 2,290 x 1,420 x 1,750 mm Turbo clutch Included as standard: - Automatic star/delta start-up - Fast hydraulics - Auto. OFF when the rotor is idle - Speed 70-90 rpm for high throughput - Cycle control to avoid idle times - Performance-enhancing step control of the hydraulic slide - Pertinax guides for the hydraulic slide - Vibration-damping machine feet Iiodpfxsd Dgw Ue Aa Iec - CE compliant . The shredder is designed for shredding natural wood, particle board, and MDF, as well as other materials after testing and approval by the manufacturer. Additional shredder options: - Raise shredder by 30 cm (prepared for conveyor belt) + €2,140 net - Articulated conveyor belt + €8,770 net Horizontal section: 1,200 mm Rising section: 2,500 mm Angle: adjustable from 0-60 degrees Discharge height: approx. 2,000 mm + - 100 mm - Overbelt magnet + €5,980 net - Conveyor belt and overbelt magnet control + €2,750 net (Start and stop synchronized with the shredder) Raw material requirements: - Moisture content (dry) must be below 30% - Installation temperature: temperature-controlled room at least +5°C - Metals and mineral contaminants such as sand, stones, etc. lead to increased wear

Condition: new, Year of construction: 2025, The ideal machine for shredding hardwood and softwood Another machine now available (ex-works Neckartailfingen). Motor: 18.5 kW; 400 V - 50 Hz - 3 ph, Blades: 14+2 pieces, 40x40mm, reversible multiple times, Rotor diameter: 260 mm, Control system: Omron PLC, Cutting chamber opening: 600 x 800 mm, Hopper volume approx. 0.6 cbm, Hydraulically operated pusher Screen perforation of your choice (12 - 40mm) Iisdpfxed E R D Se Aa Iec Extraction socket Ø 160 mm Weight approx. 1,300 kg Dimensions (LxWxH) approx. 1737 x 1167 x 1650 mm The following options are available at an additional cost: - Additional row of knives + €1,990 net (28 instead of 14) - Surcharge for segmented floor, 4-sided + €2,170 net (prevents the pusher from jamming. Recommended for materials with a thickness of less than 3 mm) - Raise shredder by 30 cm (preparation for conveyor belt) + €1,980 net - Angled conveyor belt (discharge height approx. 220 cm) + €8,770 net - Overband magnet + €5,980 net - Control system for the conveyor belt and overband magnet + €2,750 net (start and stop synchronized with the shredder) - Special bearing + €1,540 net (rarely required. Closed, even more robust rotor bearing. May be considered for screens smaller than 15 mm or high fine content. Not necessary if bearings are greased approximately every 2 weeks in operation) Requirements for raw material: - The moisture content (atro) must be below 30% - Metals and mineral contaminants such as sand, stones, etc. increase wear. We are happy to offer a free test with your material. We invite you to visit us in Neckartailfingen for this purpose. Alternatively, you can send us your material via freight company and we will document the test with photos and videos.

Condition: new, Year of construction: 2024, production time appr. 4 months * for suction perception, see picture 4 and 5 Tariff number: 84659600 Main motor: 55 kW; 400 V - 50 Hz - 3 ph including turbo coupling, Hydraulic motor: 2.2 kW, 400 V - 50 Hz - 3ph Knife: 76 pieces, rotatable Knife size: 35 x 35 x 20 mm Rotor diameter: 360 mm Control: PLC Siemens S7-1200 Funnel opening approx. 1530 x 1235 mm Hopper volume approx. 2.5 square meters hydraulically operated slide Screen perforation: 10 - 30 mm Extraction nozzle Ø 200 mm Weight approx. 4,500 kg Dimensions (lxwxh) approx. 2765 x 2520 x 1730 mm Turbo coupling Included as standard: - V-rotor for other throughput - 2nd row of knives on the rotor - Control cabinet with Siemens PLC control - automatic star / delta start - fast hydraulics - Automobile. OFF when the rotor is idling - Speed ​​70-90 rpm for high throughput - Clock control to avoid idle times - Performance-increasing step control of the hydraulic slide - Pertinax guides for hydraulic slides - anti-vibration machine feet - CE conformity The shredder is for shredding natural wood, chipboard and MDF board other materials after testing and approval by the manufacturer Recognition from the raw material: - The moisture content (atro) must be below 30% Iiedpfx Aod Hkqhja Ijc - Metals and mineral impurities such as sand, stones, etc. Interests to interests wear

Condition: used, Year of construction: 1971, swing diameter 0520 mm 4-jaw-chuck diameter 500 mm faceplate 800 mm turning diameter over bed slide 400 mm turning dia. in gap 1000 mm turning length 1250 mm Isdpfxjy Nd S Ae Aa Isic turning speed range - spindle 11,2 - 1120 U/min total power requirement 7 kW weight of the machine ca. 3,8 t dimensions of the machine ca. 2,7 x 1,7 x 1,7 m Machine has a 4 position toolholder with quick change device and DRO.

Condition: used, Year of construction: 2008, MILLING MACHINE STS AVANTGARDE HS YEAR : 2007 CNC : SELCA S 4045 DH TRAVELS : X : 3,000 mm Y : 1,500 mm Z : 2,000 mm TABLE DIMENSION : 1,500 mm x 1,500 mm MAX. PERMISSIBLE LOAD : 8,000 KG. AUTOMATIC DOUBLE-ROTATION HEAD: A 2.5° - B 2.5° ISO: 50 Ijdezdtl Ejpfx Aa Ioic 4,000 rpm 37 KW TOOL MAGAZINE: RANDOM 32 POSITIONS HIGH PRESSURE: 20 BAR ACCESSORIES: 2-SPEED RANGE CHANGE CHIP CONVEYOR MACHINE VISIBLE IN OPERATION COMPLETE WITH ALL DOCUMENTATION

Condition: used, Year of construction: 2022, machine/vehicle number: 1371, functionality: unexamined, power: 10.3 kW (14.00 HP), travel distance X-axis: 3,200 mm, travel distance Y-axis: 920 mm, workpiece weight (max.): 75 kg, total height: 2,500 mm, total length: 3,800 mm, total width: 1,800 mm, overall weight: 2,000 kg, Vertical machining center, with Campus V7-EVO software, Campus Standard macro package, handheld control unit (for remote control of the machine), 21.5" flat screen monitor, keyboard with cable, 2D barcode scanner, laser workpiece length measurement, milling head 7830 with 6-position magazine (max. tool diameter 110mm), XL drilling head 1.7 kW (19 spindles), bevel gear unit 7869, workpiece support with infeed table, ECO vacuum system, automatic central lubrication, air conditioning unit for switch cabinet cooling. Iiedpfx Aaszcm Eko Isc Please refer to the attached appraisal for details on the condition of the unit.

Condition: good (used), Cryovac VS90 Flat Bed Vacuum Packer Belt 660mm wide x 1230mm L Isdpforblx Ajx Aa Ioic

Condition: used, Year of construction: 2014, operating hours: 33,100 h, machine/vehicle number: 2941, Control system: HEIDENHAIN TNC530, travel range X/Y/Z: 3,500 x 1,200 x 1,250 mm, swivel head: 2.5°, tool holder: SK50, 60 tool positions, chip conveyor: URRETXU 11-20132, serial number: 4855492004U5E2, filter system: JUMA+GAIN, serial number: 7136, capacity: 60 l/min, year of manufacture: 2013. Iijdjy T Nx Nspfx Aa Isc

Condition: reconditioned (used), Year of construction: 1990, functionality: fully functional, Spoerri shredder, 720 mm rotor width, motor power 18.5 kW, feed opening 720 x 860 mm. Iiodpfx Ajza Dc Iea Iec

Condition: used, Year of construction: 2019, operating hours: 500 h, functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, Crushing/chipping machine Vecoplan VHZ 1300, hammer mill CPM, fan and cyclone filter JFK. Machine in good condition, only operated for approximately 500 hours. The line is complete with all conveyors. Iisdpfx Aoympx Usa Ijc

Condition: used, ROTATION DIAMETER 630 MM MAXIMUM TURNING DIAMETER 510 MM MAXIMUM TURNING LENGTH 1578 MM BENCH INCLINATION 45° MAXIMUM X AXIS TRAVEL 1590 MM MAXIMUM Z AXIS TRAVEL 290 MM RAPID 20 M/MIN SPINDLE BORE 105 MM ASA A2-8 CHUCK NOSE TAPER SPINDLE MOTOR POWER 18.5 - 22 KW SPINDLE SPEED 2500 RPM QUILL OF TAILSTOCK DIAMETER 125 MM TAILSTOCK TRAVEL 1590 MM TAPER QUILL CM 5 QUILL TRAVEL 120 MM CNC FANUC Oi-TC CHUCK DIAM. 380 MM ROTATION TURRET WITH 12 PLACES Iiedpfx Aorzt Iqsa Iec CHIP CONVEYOR YOM 2008 WEIGHT 8500 KG