Used Wood Shaving Bedding for sale (10,138)

Condition: used, Year of construction: 2017, feed length X-axis: 390 mm, feed length Y-axis: 240 mm, feed length Z-axis: 400 mm, spindle speed (max.): 10,000 rpm, table length: 810 mm, table width: 250 mm, overall weight: 1,320 kg, table load: 80 kg, workpiece weight (max.): 7 kg, Bed type CNC milling machine Brand: Travis Model: MM-4 Year: 2017 Control: Fagor 8055i Table: 810x250 mm Maximum table load: 80 kg Giodpfx Ajy Awgyjcwjr Travel (X, Y, Z): 390, 240, 400 mm Taper: BT40 Clamping: Pneumatic Spindle speed: 10,000 rpm Tool changer: 8 positions Tool diameter: 80 mm Tool height: 260 mm Tool weight: 7 kg Machine weight: 1,320 kg Machine from IAIN Mecanizados workshop in Hospitalet de Llobregat. Arrange a visit to inspect the machine on site.

Condition: used, Model:- AY 1000 x 1000, Gjdjyn R Hcjpfx Acwjir Serial No: Nc-A3-045 1 metre swing over bed, 1 meter between centres 390mm Swing Over Saddle 180mm Spindle Bore 4 Jaw Chuck 800mm Diameter Quick Change Tool Post Fagor 8055 controls Made In Taiwan

Condition: used, empty load weight: 4,390 kg, maximum load weight: 13,610 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 11/2018, color: black, Year of construction: 2018, operating hours: 171,224 h, mileage: 171,224 km, driver cabin: day cab, emission class: none, Equipment: ABS, truck registration, Reference number for inquiries: 69815 Doll, tandem * Year of manufacture: 2018 * ABS (Anti-lock Braking System) * Duomatic air coupling * 15-pin connector plug Godpjyz Ihfjfx Acweir * Gross vehicle weight: 18,000 kg * Unladen weight: 4,390 kg * Payload: 13,610 kg * Permissible total weight: 18,000 kg * Axle manufacturer: BPW * Manufacturer: BEFA Belziger Fahrzeugbau * Wabco Smartboard * 50 mm towing eye * Coupled at top * Short timber trailer with 4 bolsters and ExTe stakes * 3x protective bolsters * Steel frame cover * Wabco Smartboard, 171,000 km Disclaimer: Subject to alterations, prior sale, and errors. You can find more pictures and videos on our website. Our comprehensive service includes, for example: * Purchase / sale / rental of commercial vehicles * Fast, straightforward financing * Handling all (export) documentation * Ordering export / customs number plates * Vehicle preparation: new tarpaulins, lettering, painting, etc. * Professional loading and load securing * TÜV inspections, registration service * Transfer of commercial vehicles Speak to our well-trained staff – we are happy to advise you.

Condition: new, Year of construction: 2025, Technical data: X 3500 mm Y 1300 mm Z 1600 mm TNC 7 control Milling head indexing 0.001° x 0.001° 6000 rpm 60-position tool changer 2 chip conveyors Gjdpfx Acoyxm Huowsir High-pressure coolant (IKZ) 40 bar internal / 5 bar external Full enclosure + extraction system Carousel rotary table, diameter 1,600 mm

Condition: new, Year of construction: 2025, travel distance X-axis: 3,500 mm, travel distance Y-axis: 1,200 mm, travel distance Z-axis: 1,500 mm, Technical data: X 3500 mm Y 1200 mm Z 1500 mm Control: TNC 7 Milling head indexing: 0.001° x 0.001° Speed: 6,000 rpm Tool changer: 60 positions Godpfx Ajyxmxqjcwjir Chip conveyor: 2 units Coolant supply (IKZ): 20 bar internal / 5 bar external

Condition: ready for operation (used), Year of construction: 1978, travel distance X-axis: 4,500 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 1,000 mm, spindle speed (max.): 2,066 rpm, table width: 1,000 mm, table length: 6,100 mm, overall weight: 19,000 kg, 3-axis Newall display with variable feed rate 50-speed head with continuously variable spindle speeds, max. 1,500 rpm 6100 x 1,000 mm table 4500 x 1,000 x 1,000 mm stroke Gijdpfx Acjvz Aydswsr 19-ton weight

Condition: excellent (used), functionality: fully functional, PALLET CRUSHING LINE : 2 Shredder 2 conveyors with magnetic drum for nail removal. Used only 200 hours AMIS shredder and 30 hours RUBUST shredder. Like a new and good price. Gsdpfx Aceyvhi Eowsir

Condition: ready for operation (used), Year of construction: 2010, Immediately available ex location: CNC bed milling machine Wagner Type WBE 1300 R Year of manufacture: 2010 Siemens Sinumerik 810 D Table 1500 x 400 mm Travel X/Y/Z: 1300/500/570 mm SK 40 Automatic tool clamping Drive power 12/9 kW Giodpsy Alppefx Acwor Spindle speeds 60 – 8,000 rpm Electronic handwheel Ball screw Vice Various tool holders Weight 4 t Price: EUR 5,500 plus VAT ex location

Condition: ready for operation (used), Year of construction: 2000, Available immediately from location: CNC bed milling machine MTE Giodpfx Aoy Aln Socwjr Model Kompakt Plus Year of manufacture 2000 Heidenhain TNC 410 Table 2200 x 750 mm Travel X/Y/Z 2000/800/800 mm Table load 4 t Spindle taper SK 50 Hydraulic tool clamping Spindle speeds 40 – 2500 rpm Spindle power 15 kW Total power requirement 30 kW Coolant system Weight 12 t Price: EUR 12,500 — plus VAT, ex location

Condition: ready for operation (used), Year of construction: 2009, Available immediately ex location: Giodpfxey Aln Ee Acwer CNC bed-type milling machine Iberimex Model Ecomill BF 2600 Year of manufacture 2009, low operating hours Heidenhain iTNC 530 Table 2700 x 1050 mm Travel ranges X/Y/Z 2600/1000/950 mm Table load 6 t Internal coolant supply (IKZ) 14 bar Hydraulic tool clamping SK 50 spindle taper Spindle speeds 24 - 1600 rpm Spindle drive 25 kW Chip conveyor Weight 14 t Price: €21,000 plus VAT, ex location.

Condition: good (used), Used milling machine from Universal Mill Gsdeyu Ic Uopfx Acwjir

Condition: used, Year of construction: 2012, x-travel 1600 mm y-travel 710 mm Gsdpfx Asyyqgujcwoir z-travel 700 mm Control HEIDENHAIN, TNC 124 table surface area 2200 x 550 mm spindle taper SK 50 DIN 69871 spindle turning speed - stepless 40 - 1600 U/min spindle drive 11 kW feed X/Y/Z-axis 2000/2000/1000 mm/min. rapid traverse X/Y/Z axis 5000/5000/2500 mm/min feed motor 3 kW distance table / vertical spindle 50 - 750 mm distance table/horizontal spindle 60 - 760 mm table load max. 3000 kg total power requirement 15 kW weight of the machine ca. 8 t dimensions of machine L x W x H 3,50 x 2,82 x 2,70 m Accessories: Univ.-milling head with hydr. tool clamping, electron. handwheel, table housing, coolant

Condition: used, Year of construction: 2010, Technical details: spindle passage: 92 mm turning length: 1000 mm z-axis: min.: 404 mm z-axis: max. 1130 mm facing movement (x-axis): min./max.:15 / 335 mm control: Sinumerik SL840D max. torque on the spindle: 2500 Nm tool turret: 12 tools axial operating pressure: 6,0 bar rapid traverse: 20 m/min total power requirement: 88 kVA dimension machine xH: ca. 4,45 x m dimensions of the bar loader L-W-H: ca. L: 5,7 x B: 2,65 x H: 2,4 m CNC lathe with bar loader - inclined bed lathe -SL 840D control with NCU software 2.6, system software 1.4, store turn software 6.4, with one orientable C-axis, without driven tools -KNCS 260-72 chuck, SMW Autoblok -Clamping force generator via clamping cylinder VNK-200/86 / SMW Autoblok -Measuring system Fa. Heidenhain -Sauter VDI50 tool disk turret, electric drive Bar loaderMaster 80HF, type 33LL: -Dimension round material min./max.: Ø 20mm / 80mm -Minimum length of the workpiece: 33-38-43 to 1000mm -Maximum length of the workpiece: 33 - 3300mm / 38 - 3800mm / 43 - 4300mm -Feed speed (adjustable) 150mm/sec. - Return speed (adjustable) 950mm/sec. -max. offcut length: Ø 8+65mm = 400mm / Ø 66+80mm = 250mm -min. remnant 120mm Gedpfjwf Nrajx Acwjir Chip conveyor / hinged belt from Richter, type SP 450/63 -Discharge height = 1000mm, discharge side right Accessories: -div. tool holders VDI 50 -sizing adapter SK50-> VDI 50 -Power chuck Hainbuch Toplus Kombi Ax-zug GR100 -div. sleeves, guide jaws for bar loader Ø 20 - 75mm i.D. *

Condition: new, A device for storing and feeding logs onto a sawmill table. The systematic material feed to the saw increases its efficiency and eliminates the need for additional personnel. Dimensions: Width: 800–2000 mm Height: 800 mm Length: 4000–12000 mm (longer option) Log length: 1000–2500 mm Log diameter: 100–400 mm Feed speed: adjusted to the incoming feeder LOG FEEDING A device for storing and feeding logs onto the table of a gang saw. The targeted material feed to the gang saw increases its efficiency and eliminates the need for additional personnel. Dimensions: Width: 800-2000 mm Height: 800 mm Length: 4000-12000 mm Log length: 1000-2500 mm Giedswavrcspfx Acwor Log diameter: 100-400 mm Feed speed: Adapted to the feed rate

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, Working height: 900 mm Working width: 1,350 mm Belt changing side: left Workpiece thickness: 3 - 160 mm Frequency-controlled feed speed: 4 - 20 m/min Abrasive belt dimensions: 2,620 x 1,350–1,380 mm Adjustable sanding belt blowing device with 5 settings WRD WORKPIECE CLEANING ROTOR Workpiece cleaning system with 16 rotating nozzles MOBILE OPERATING TERMINAL powerControl with powerTouch SST SOFT STARTER Inrush currents are limited to prevent voltage drops GWRD BELT CLEANING PROGRAM Upon activation, the machine automatically sets to a 10 mm workpiece thickness and activates the blowing rotors. After the feed belt is fully cleaned, the machine returns to its initial setting. AAT EXTRACTION DAMPER CONTROL Control of extraction dampers via the terminal (24 Volt DC, without extraction dampers included) Gjdpfx Aceyw Ndmswoir UPS EMERGENCY POWER SUPPLY FOR BELT CONTROL 1-3 PCS Uninterruptible power supply for sanding belt oscillation in case of power failure System consists of: SANDTEQ W-700, PROFI SWB735/RRE – sanding from below Wide belt sanding machine with three sanding units for processing wood or wood-like workpiece surfaces Prepared to accept up to two auxiliary units, such as a cleaning brush, satinizing or structuring brush, and rotating cleaning nozzles. Units: I. R UNIT Sanding unit with automatically adjusting contact roller Profiled steel roller, 240 mm diameter With grain compensation Drive motor: 37 kW Abrasive belt speed: 25 m/s - Automatic locking of the sanding unit for fast belt changes and increased process safety - Abrasive belt drives with electronic, wear-free brake - Optical, touchless abrasive belt tracking - Pneumatic abrasive belt tensioning with integrated belt edge compensation II. R UNIT Sanding unit with automatically adjusting contact roller Rubber-coated roller, 240 mm diameter Rubber hardness: 85° Shore With grain compensation Drive motor: 30 kW Abrasive belt speed: 18 m/s III. E UNIT Sanding unit for installing a pressure beam - Automatic locking of the sanding unit for fast belt changes and increased process safety - Abrasive belt drives with electronic, wear-free brake - Optical, touchless abrasive belt tracking - Pneumatic abrasive belt tensioning with integrated belt edge compensation - Protected storage area on the machine for additional sanding inserts Drive motor: 22 kW Abrasive belt speed: 2 – 18 m/s Torque-dependent standby operation to reduce energy consumption. ACP PNEUMATICALLY SUPPORTED PRESSURE BEAM - Adjustable sanding pressure via pressure regulator - Workpiece-controlled engagement and disengagement at the leading and trailing edges - Various sanding inserts, 80 mm wide, with different felt hardnesses Machine dimensions (L x W x H): 3,900 x 2,100 x 2,000 mm Machine weight: approx. 7,500 kg SANDTEQ B-700, PROFI SWT735/RRE – sanding from above Wide belt sander with three sanding units for machining wood or wood-based workpiece surfaces Units as above, additionally: FBM FINISHING BRUSH Brush unit with finishing brush Bristles: horsehair Diameter: 130 mm Drive motor: 0.75 kW Machine dimensions (L x W x H): 2,995 x 2,100 x 2,255 – 2,415 mm Machine weight: approx. 6,500 kg

Condition: new, Year of construction: 2025, operating hours: 1 h, functionality: fully functional, travel distance X-axis: 4,000 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 1,000 mm, controller manufacturer: STYLE CNC Machines, number of slots in tool magazine: 24, motor manufacturer: FANUC, Delivery after consultation Ref: 24F048 Year of construction: 2025 Condition: Showroom Specifications: - X-axis: 4000 mm - Y-axis: 1000 mm - Z-axis: 1000 mm - 26 kW (S6) main motor - 8000 rpm - BT-40 - Automatic tool changer (24 positions) - Remote service (IXON) + network connection - Stronger coolant pump incl. spray gun - Upgraded to the latest STYLE software available Gsdpfx Acow Ty S Sewoir

Condition: used, Year of construction: 2020, functionality: fully functional, power: 13 kW (17.68 HP), input voltage: 380 V, input frequency: 50 Hz, For Sale: Format 4 Creator 950 – Vertical CNC Machining Center Due to the recent acquisition of Noordzee Interieur and the subsequent consolidation of our workshops, we currently have a duplicate CNC machine. That is why we are offering our Format 4 Creator 950 for sale. The machine needs to be cleared from our workshop in the short term. The Creator 950 is the renowned, compact vertical machining center from Format 4 (Felder Group). It is ideal for safe, efficient, and space-saving CNC drilling and milling. Simply insert the panel and the machine does the rest, without the need to set up large vacuum tables. Specifications & Details: - Brand & Model: Format 4 Creator 950 - Type: Vertical CNC Machining Center - Serial Number: 341.09.001.20 - Year of Manufacture: 2020 - Condition: Used, but in excellent and fully functional condition. Additional Information: An excellent opportunity for an interior fitter or woodworker looking for a reliable, space-saving CNC machine on short notice. Serious buyers are welcome to visit our workshop [in Middelkerke / or alternative location] for an inspection. Feel free to contact us for more information or to schedule an appointment! Asking Price: €53,620 Included per unit: - Second reference cylinder, on X-axis, positioned deeper in the machine for processing long workpieces - Machine support tables (front and rear) with air cushion system - Pick-up position * Only available on Advanced and Premium - 4-position linear tool changer, also suitable for aggregates * Not with tool length measurement * T001668 * Only on Advanced * On Premium free of charge instead of T001662 Gisdpfx Acoyv Eu Eswsr - UPS – Uninterruptible power supply for the machine PC, ensuring safe shutdown and data storage in case of power failure. Serial Number: 341.09.001.20 – 341.09.001.20 The Format-4 Creator 950 (Advanced, 2020) comes standard with a 9.0 kW spindle motor. Total electrical connection: 13 kW.

Condition: used, Year of construction: 1999, x-travel 3.700 mm Gedoyxr Nnspfx Acwjir y-travel 1.500 mm z-travel 1.000 mm Control Heidenhain table dimensions 4.000 x 1.000 mm table load capacity 10.000 kg spindle tunring speed 3.000 U/min tool taper ISO 50 number of tool places 30 Pos. In our assessment, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools, and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Technical data and specifications are subject to change without notice and errors. Prior sale is reserved.

Condition: good (used), Wood band saw, band saw machine, band saw, vertical band saw, bone saw, table saw, bone band saw, butcher's saw -Manufacturer: Reich, band saw, table saw with stand -Motor: Dietz 0.8 kW Gedpsyvrd Tjfx Acweir -Cutting width: max. 200 mm -Cutting height: max. 275 mm -Saw blade: Length 2200 mm -Dimensions: 830/720/H1715 mm -Weight: 114 kg

Year of construction: 1958, condition: used, machine/vehicle number: 58/803 0021, height of centers: ueber Oberbett 300 mm center distance: 1500 mm Gisdpfxs Uin Uo Acwjr max. circulation-Ø over bed: ueber Oberbett 640 mm spindle boring: 67 mm spindle retainer: Gr. 8 retainer taper tailstock: 5 MK spindle speed: 18 - 900 rpm forwarding feed: laengs/plan 0,063-2/0,032-1 mm/U thread pitch: 0,5 - 14 mm electrical connection: 380 V, ca. 7,5 kW space needed: 1550 x 3100 x 1250 mm weight: ca. 3500 kg

Year of construction: 1990, condition: used, machine/vehicle number: 90030003, table size: 500 x 1200 mm movement x: 1000 mm Gsdpfe Npwfox Acwjir movement y: 550 mm movement z: 600 mm spindle taper: ISO 40 spindle turning speed range: 60 - 2700 rpm spindle drive: 10 kW electrical connection: 380 V, 20 kVA kW space needed: 3200 x 2800 x 2650 mm weight: 7,3 t

Condition: ready for operation (used), Year of construction: 1983, machine/vehicle number: 3601, Saw blade diameter: 300 mm Saw blade speed: 2800 rpm Cutting capacity at 90°: 70 x 120 or 50 x 140 mm Mitre stops left and right: 15/22.5/30/45°, any intermediate position lockable Drive motor: 380 V, 2.2 kW Gijdpfoyh Hn Hjx Acwjr Weight: 50 kg

Condition: used, Year of construction: 1981, machine/vehicle number: 2383, table size: 630 x 500 mm saw blade diameter: max. 250 mm curring height: 77 mm Godpob H Infofx Acwjir saw blade rotations: 6300 rpm electric drive: 380 V, 2,2 kW space needed: 800 x 680 x 840 mm

Condition: good (used), Year of construction: 1993, Offered for sale is a used Zeno drum chipper, year of manufacture 1993. Type 1400x1600 mm. 97L-4538. Main motor: 75 kW, 1500 rpm. Hydraulic motor: 4 kW. Includes spare gearbox. Gisdpfx Acjyznahower

Condition: used, Year of construction: 1999, functionality: unexamined, travel distance X-axis: 2,000 mm, travel distance Y-axis: 1,200 mm, travel distance Z-axis: 1,050 mm, rapid traverse X-axis: 20,000 m/min, rapid traverse Y-axis: 20,000 m/min, rapid traverse Z-axis: 20,000 m/min, spindle speed (max.): 4,000 rpm, spindle speed (min.): 60 rpm, table width: 1,100 mm, table load: 8,000 kg, table length: 2,300 mm, Bed milling machine Anayak VHPlus 2000 Travel: X: 2,000 mm Y: 1,200 mm Z: 1,050 mm Godpjx Ndcujfx Acwjir 45° universal milling head Spindle: SK50 Power: 30/35 kW Spindle speed: 4,000 rpm Coolant system Tool changer: 30 positions, chain magazine Control: Heidenhain TNC426 Electronic handwheel Export documentation and shipping available at extra cost. Machine can be inspected under power. We will gladly send you further details or arrange an on-site inspection.