Office container

Villex Container GmbH Medium Wood Pavillon 2.0

Condition: new, Year of construction: 2023, operating hours: 1 h, functionality: fully functional, overall weight: 5,200 kg, fuel type: diesel, color: beige, power: 513 kW (697.49 HP), output voltage: 400 V, output frequency: 50 Hz, type of output current: three-phase, nominal power: 408 kW (554.72 HP), nominal power (apparent): 510 kVA, continuous power: 368 kW (500.34 HP), total length: 4,460 mm, total width: 1,606 mm, total height: 2,493 mm, rotational speed (max.): 1,500 rpm, motor manufacturer: Doosan, type of cooling: water, AVS diesel generator set - stationary Type: DW 460 DO2 15 AK14A PRP output: 368 kW / 460 kVA ESP output: 408 kW / 510 kVA Operating hours: 1 Engine: DOOSAN DP158LC Power standby: 513 kW Dkodoua Tl Aspfx Aqvon Speed: 1,500 rpm Operating voltage: 24 V Cooling: water-cooled Generator: Mecc Alte ECO 40-3S/4 B Voltage: 400/231 V Voltage regulator: DER-1/A Control panel: DSE 7320 - automatic emergency power supply Dimensions: 4460 x 1606 x 2493 mm (LxWxH) Weight: 5200 kg Equipment: Battery charger 5 Amper, battery disconnect switch

Condition: like new (used), Year of construction: 2015, overall weight: 5,000 kg, fuel type: diesel, power: 455 kW (618.63 HP), output current: 820 A, output voltage: 400 V, output frequency: 50 Hz, nominal power: 455 kW (618.63 HP), nominal power (apparent): 570 kVA, continuous power (apparent): 570 kVA, total length: 4,500 mm, total width: 1,700 mm, total height: 2,200 mm, rotational speed (max.): 1,500 rpm, motor manufacturer: Volvo Penta, type of cooling: water, For sale is an emergency generator set with 580 kVA / 440 kW in very good condition. Condition: used, as new, fully functional, tested! Rated output: 580 kVA / 440 kW Engine type: Volvo Penta TAD1642GE Operating hours: 150 h Djdpfxjvgql Ej Aqvjkn Year of manufacture: 2015 Voltage: 400/230 V Frequency: 50 Hz Speed: 1,500 rpm Condition: fully operational, ready for use, tested Includes new maintenance Includes diesel tank Includes batteries Completely operational, immediately ready for use Price: net €38,000 plus VAT

Condition: excellent (used), Year of construction: 2005, operating hours: 1,227 h, overall weight: 4,800 kg, fuel type: diesel, tank capacity: 1,000 l, color: grey, power: 280 kW (380.69 HP), output current: 504 A, output voltage: 400 V, output frequency: 50 Hz, type of output current: three-phase, nominal power: 280 kW (380.69 HP), nominal power (apparent): 350 kVA, total length: 4,500 mm, total width: 1,600 mm, total height: 2,200 mm, rotational speed (max.): 1,500 rpm, motor manufacturer: Iveco, type of cooling: water, For sale: Emergency generator in very good condition. Condition: used, as new, fully operational, tested! Rated output: 350 kVA / 280 kW Engine type: Iveco, 6 cylinder Operating hours: 1,228 h Year of manufacture: 2005 Voltage: 400/230 V Frequency: 50 Hz Speed: 1,500 rpm Condition: fully functional, ready for operation, tested Incl. new maintenance Incl. diesel tank Incl. batteries Completely operational, ready for immediate use Dkodpfxot Agwxo Aqvjn Price: net €19,000 plus VAT

Condition: excellent (used), Year of construction: 2022, Four Kardex Shuttle XP 500 units from 2022 for sale. Since installation, the machines have been regularly maintained by the manufacturer and are in very good condition. These Vertical Lift Modules are equipped with trays measuring 4,050 mm wide and 813 mm deep. This is Kardex’s widest standard model, offering ample storage capacity while keeping the footprint to a minimum. The machines stand 4,950 mm tall, making them ideal for use in facilities with lower ceiling heights that still require increased storage capacity. Each tray provides approximately 3.3 m² of storage space. With about 35 trays per machine, each unit delivers around 115 m² of storage. Combined, the four machines offer approximately 460 m² of storage area, while occupying only 52 m² of floor space. Every tray supports up to 320 kg, giving each machine a total load capacity of up to 11,200 kg with 35 trays installed. If needed, additional trays can be added. All trays feature 75 mm high tray edges. The machines are in excellent condition and are ideally suited for companies looking to maximize storage capacity efficiently. Technical Information: Year of manufacture: 2022 Model: SHUTTLE-XP-500-4050x813 Dedpey R U Nzefx Aqvekn Machine height: 4,950 mm Machine width: 4,380 mm Machine depth: 2,972 mm Tray width: 4,050 mm Tray depth: 813 mm Number of trays: Approx. 35 per machine Maximum load per tray: 320 kg Electrical specification: 3/N/PE 400V, 23A

Condition: good (used), Year of construction: 2012, fuel type: diesel, General information Field of application: Construction Weights Empty weight: 2.172 kg Functional Generator capacity: 60 kVA CE mark: yes Condition Technical condition: good Visual appearance: good Other information Fuel consumption: Diesel Delivery terms: EXW Water tank volume: 390 l Additional information Please contact Christian Theißen for more information Manufacturer: SDMO Model: R66C2 Year of build: 2012 Condition: Used Dksdpfex H Nlisx Aqvjn Data: Performance: 60 kVA Engine: John Deere Length: 234 cm Width: 108 cm Height: 190 cm Tank capacity: 39 l / Diesel Required connection: 2x 230 V/16 A, 1x 380 V/16 A, 1x 380 V, 63 Ao. Klemmleiste. Drive type: Diesel Operating noise: 88 dB Own weight: 2.172 kg Weight: betankt 2.500 kg Own weight: 2.172 kg Special features: Lifting eye, consumption of approximately 14.75 liters per hour. On Weijer trailer. Location: 41468 Neuss immediately available

Condition: used, Panel saw ALTENDORF F45 - used - double roller carriage, tilting, parallel fence with fine adjustment, outrigger table, table extension, anodized aluminium, table width extension, anodized aluminium, mitre fence, Djdpfx Aqow Nv I Uovskn overhead guard, narrow and wide ----- Technical specifications ----- Tilting range: 45°, Carriage length: 2,500 mm, Cutting width: 800 mm, Max. saw blade Ø: 450 mm, Motor power: 5.5 kW, Extraction nozzle Ø: 80 / 120 mm

Condition: new, Large 3-phase gasoline generator on wheels Professional power station for you with a great need for backup for your home in the event of a power cut, or for the tradesman who needs many hours of continuous operation with high performance. The generator delivers a maximum output of 6.6 kW, has a large 25-liter tank and 2 x 230 V sockets with IP44-approved Schuko plugs and 1x 400 V CEE plug (16 A). The functional emergency power system runs on unleaded gasoline and has both an electric start and a reversing starter, terminal for earthing the generator, oil alarm, overload protection and VFT meter (displays volts, frequency and hours). The gasoline generator has an operating time of 7 hours at full load and 13.5 hours at 50% load and can be used for power tools, lighting and larger electrically powered products such as an electric radiator or water heater. The Ford generator is built to last - BUILT TOUGH as Ford describes it - and the long operating time, large 25 liter tank and built-in oil alarm mean you don't have to constantly check that the generator is running as it should. Dksdpfx Aqeuziauevjn Manufacturer / Brand: Ford Model. No.: FGT9250E Voltage: AC 230V/400V AC current: 10.8A Power class: G1 Continuous power: 6000W MAX power: 6500W Frequency: 50Hz Tank capacity: 25L Oil volume: 0.6 liters Power factor 0.8 Revolutions per minute: 300 min-1 Maximum altitude: 1000m Maximum ambient temperature: 40°C Protection class: IP23M Engine: 420 ccm, 4-stroke, air-cooled Operating time v/max load: 7 hours Starting method: Reverse start & electric start Battery: 12V 9Ah Dimensions: H70 x L70 x W50 cm Weight: 70 kg Manufacturer price: 1.899,00 € You can find more items - new and used - in our store! International shipping costs on request!

Condition: used, Year of construction: 2006, working width: 520 mm, roll width: 520 mm, roll diameter: 1,000 mm, Equipment: documentation/manual, Video below We offer this used ETI Converting Equipment Cohesio ST 520 coater, die cutter, UV silicone coating, flexographic printing press 1 colour, , 11 magnetic cilinders, year of construction 2006. multifunctional equipment that allows self-adhesive materials and labels. linerless 1 flexo 2 hotmelt coating guns (roatating bar, lips + ‘Waterwall”) 3 unwinders Web width of 520 mm E + L webguides at the infeed and between hotmelt and UV printing unit 2 Corona treatments for two unwiders 2 cleaners UV Curing on 1 Flexo units (UV-Ray), which chilling rolls Dksdpfx Aqeyalqyovsn 2 die cutting units Chiller Working hours 9000 Year of production 2006 more information on request If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: used, Year of construction: 2016, total length: 6,400 mm, total width: 1,500 mm, total height: 1,700 mm, Price: On request Dedpfxeyvh Rvo Aqvokn - Year: 2016 - Documentation available: No - CE certificate present: No - Max. cutting length [mm]: 3200 - Min. saw blade diameter [mm]: 300 - Max. saw blade diameter [mm]: 350 - Arbor saw blade diameter [mm]: 30 - Dust extraction nozzle diameter [mm]: 120 - Spindle speed: Automatic - └ Max. spindle speed [rpm]: 4000 - Voltage [V]: 400 - Current consumption [A]: 18.5 - Fuse [A]: 25 - Transport dimensions: 6400mm x 1500mm x 1700mm (l x w x h) - Transport packages [pcs.]: 2 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: new, Year of construction: 2025, Introduction Of Jaw Crusher Plant The capacity vary according customer request. And in order to meet the different demands of customers, the production line can equip with cone crusher, dust removal equipment and other equipment. It is suitable for the materials like hard limestone, granite,basalt, pebble, metallurgy slag and artificial sand making work. It is widely used in the industries of hydroelectric, building materials, highway, and urban construction. And according to different technological requirement, various types of equipment can be combined to meet the demands of different customers. Product Advantages of Stone Crusher Machine Plant 1.High reliability, good stability 2.Convenient maintenance, easy operation 3.Low operation costs, wide application range 4.Laminating crushing makes good discharging grain shape We also provide other stone crushing solutions like 1. Vibrating feeder + Jaw crusher + Fine jaw crusher + Vibrating screen 2. Vibrating feeder + Jaw crusher + Impact crusher + Vibrating screen 3. Vibrating feeder + Heavy hammer crusher + Vibrating screen 4. Sand Production Line 5. Gravel / Aggregate production line A stone crushing plant for sand and aggregate production involves several stages and equipment. Here's an overview of the process and the main components involved: Process Overview 1. Primary Crushing: Large stones from the quarry are fed into a primary crusher, typically a jaw crusher, which reduces them to smaller, manageable sizes. 2. Secondary Crushing: The output from the primary crusher is further reduced in size by a secondary crusher, usually a cone crusher or impact crusher. 3. Screening: The crushed material is separated into different size fractions using vibrating screens. Oversized material is returned to the crushers for further reduction. 4. Sand Making: For producing sand, the material might be passed through a sand making machine, like a vertical shaft impact crusher, to achieve the desired shape and size. 5. Washing: The final product is often washed to remove impurities and improve the quality of the aggregate. 6. Stockpiling: The finished product is stored in stockpiles before being transported to customers. Main Components of stone crushing plant 1. Jaw Crusher: Used for primary crushing of large stones. 2. Cone Crusher or Impact Crusher: Used for secondary crushing to produce finer aggregates. 3. Vibrating Screen: Separates the crushed material into different size fractions. 4. Sand Making Machine: Special equipment for producing sand. 5. Belt Conveyors: Transport materials between different stages of the process. 6. Vibrating Feeder: Feeds raw material into the crushers evenly and continuously. 7. Sand Washer: Cleans the sand by removing impurities. 8. Control System: Manages the entire process, ensuring efficient and safe operation. Dkedoq Nyy Espfx Aqvsn Implementing a well-designed stone crushing plant can significantly increase production efficiency and produce high-quality sand and aggregate.