Used Whole Log Chipper for sale (2,399)

Condition: like new (used), Year of construction: 2016, overall weight: 8,200 kg, fuel type: electric, color: white, Type HX426 Blade diameter (mm) 650 Number of hammers (pcs) 30 Inlet size (mm) 1250 x 250 Screen mesh size (millimeter) 80 Length of chips (mm) 50 -80 Capacity (t / h) 8- 10 Main power (kW) 132 Feeder motor (kw) 7.5 +5.5 Discharge motor (kw) 5.5 +5.5 Oil pump motor (kw) 1.5 Length of conveyor (mm) 4000 Conveyor length (mm) 10000 Weight (t) 8.2 Gbedsqmi Irspfx Afksn Note: capacity depends on the physical characteristics of the raw material, feeding method, feeding speed and production volume.

Condition: good (used), Please read the technical specifications carefully. If the machine is a potential investment for you, we kindly ask that you provide full identification with a correct telephone number and email address before we can issue an offer. Godpfx Afjxz R Niskebn LOG-O-MATIC (Mainaschaff/Germany) Surface Grinding Machine FS 5030 AH Year of manufacture: 4/1991 Grinding area: approx. 500 x 300 mm Automatic vertical feed Manual longitudinal, cross, and vertical feed Accessories/Features: - Electromagnetic chuck approx. 500 x 300 mm - Manual wheel dresser on the carrier - Paper band filter - Coolant system - Machine lamp - Machine feet Additional accessories: - Side-, angle-, and radius dressing device - Balancing scale - Demagnetizing plate The machine is in very good condition and comes from a training facility. Available from March 2026.

Condition: good (used), Year of construction: 2000, functionality: fully functional, Sawmill Line Equipment for Sale We are offering for sale part of a sawmill production line (the EWD band saw has already been sold). The following equipment is available: - Complete conveyor systems - Esterer edging saw (year of manufacture: 2000) - Multi-rip saw (250 kW German motor, year of manufacture: 1992) - SDOP 600/3 drum chipper (year of manufacture: 2010) - Full conveyor system for sorting sawdust and offcuts into the chipper The line has been in operation until 02/2026 and is fully functional. Gbsdpsyyv Udefx Afksn ✔ Available as a complete set or as individual machines. For more information, please contact us via email or WhatsApp.

Condition: new, Year of construction: 2026, functionality: fully functional, FABO Log Washers are designed to remove woods, plastic clay contaminants and other harmful materials from gravel, stone and hard ore feeds. Designed to successfully clean the most difficult materials, FABO Log Washers allow the user to obtain valuable products from what was once considered waste. When selecting a Log Washer, the variety of feed material must be taken into consideration. The volume and shape of the feed material can influence the capacity of a particular size fraction. FABO can provide a list of capacities and water requirements based on the user's material. Key benefits to the buyer include improved wear characteristics, reduced costs and the ability to efficiently wash aggregates and drift out clays/sands/lights (wood/plastics) on one chassis. Godpfxoy I Nuge Afkebn

Condition: used, Log table with elevator and log scanner Rema Control - logs up to 6 m - between rails 1100/1050/ 1050/1250 mm Gjdpfx Afsu Smq Sskobn - log table length: 10 m - Rema Scanner - log infeed conveyor

Condition: repair required (used), Disc chipper Bruks IDC000127 - infeed 220 X 280 mm Gedpfx Asvzw Tfsfkobn - without electric motor

Condition: good (used), Foss inline fat analyser, has been used for meat blocks and free flowing mince. Gjdpjh Ag Nkofx Afkebn

Condition: new, Year of construction: 2025, Vertical design for splitting short and metre logs Low base plate for easy, low-fatigue loading of large logs Mechanical log lifting device brings heavy logs into position without strain on the operator's back With splitting material catcher Fast, tool-free splitting height adjustment Powerful industrial hydraulic system Phase inverter on all 400 V models Two-hand safety circuit Comfortable transport with hand drawbar due to standard chassis with hard rubber wheels and additional support wheel Shock and scratch resistant due to high quality powder coating Space-saving storage due to easily lowerable cylinder Dimensions and weights Length approx. 1440 mm Width/depth approx. 1350 mm Height approx. 2280 mm Weight approx. 185 kg Drive Drive type electric motor Input power 3,5 kW Electrical data Supply voltage 400 V Mains frequency 50 Hz Equipment data Splitting force max. 14 t splitting length min. 560 mm splitting length max. 1040 mm splitting material diameter min. 100 mm splitting material diameter max. 300 mm Gedpehkz Hmsfx Afkjbn Hydraulic system Tank capacity hydraulic oil 7,5 l Location: ex stock 54634 Bitburg - immediately available - subject to prior sale

Condition: as good as new (ex-display), Year of construction: 2026, Quiet and slow runner WL 4/18,5 kW Technical data: Hopper opening: 600 x 800 mm Hopper opening with logspacer:600 x 1050 mm hopper capacity: approx. 0,6 m³ Working width of the rotor: 600 mm Diameter of the rotor: 252 mm Number of knives: 28 pieces Knives: 40 x 40 mm concave Sieve perforation: 15/20 mm Included: Control cabinet Electrical control Gjdpfxobtnftj Afkobn Star-delta start-up Rubber vibrating elements 2nd row of knives Logspacer (free cutting hopper) Top equipment Location: Ex stock Bitburg - immediately available - at a special price

Condition: as good as new (ex-display), Year of construction: 2026, Quiet and slow runner WL 4/18,5 kW Technical data: Hopper opening: 600 x 800 mm Hopper opening with logspacer: 600 x 1050 mm hopper capacity: approx. 0,6 m³ Working width of the rotor: 600 mm Diameter of the rotor: 252 mm Number of knives: 28 pieces Knives: 40 x 40 mm concave Sieve perforation: 15/20 mm Included: Control cabinet Electrical control Star-delta start-up Gsdjbunq Hjpfx Afkobn Rubber vibrating elements 2nd row of knives Logspacer (free cutting hopper) Location: 54634 Bitburg Immediately available

Condition: new, Year of construction: 2026, Weima chipper / shredder WL 8 The WL 8 single-shaft shredder is a proven classic for shredding all types of wood waste. It is used, for example, thousands of times in wood-processing plants all over the world. The high quantity of these highly demanded shredders guarantees a proven and reliable technology at the best price-performance ratio. The machines are characterized by their very robust design, which ensures an extremely long service life (even outdoors). Intuitive operation thanks to Siemens PLC control with touch display. To ensure that the electronics are optimally matched to the machine, we design, build and wire our control cabinets ourselves. We only use high-quality components - for example from Siemens or Rittal. Intuitive touch interfaces guarantee quick adjustments. Functions such as setting the slider clock or stop ensure high throughput. The built-in overload protection also prevents defects in the machine. No material bridges due to free-cutting hopper design The hopper fulfills several tasks at once. First, the material to be shredded is fed through it - manually, mechanically, or by conveyor belt. The generous opening makes it easy to fill even very large parts. However, its special design, which is rounded at the front and thus effectively prevents material bridges, is decisive for shredding. Even with bulky parts, the shredder cuts itself free. If required, both hopper extensions and lids with gas pressure springs are available. Durable rotor bearings thanks to offset design A rotor bearing must be particularly robustly built due to the extreme stresses it is subjected to during shredding operation. To prevent dust or foreign matter from getting inside it, we have set it apart from the machine frame. This also makes it very maintenance-friendly and easy to access. Rotor diameter (mm): 260 Rotor length (mm): 1000 Rotor speed (rpm): 80 - 125 Power (kW) 22 Number of knives: 54 Available knife sizes (mm): 40 x 40 Grain size (mm): Suction port (mm): 200 Feed opening (mm): 1000 x 1250 length (mm): 2045 width (mm): 1740 height (mm): 1840 Gbodpfx Afjmhh Idsken Weight (approx. kg): 2200 Accessories: - 2nd row of knives - logspacer Location: Comes to stock 54634 Bitburg

Condition: used, mileage: 807,000 km, power: 338 kW (459.55 HP), first registration: 07/2005, fuel type: diesel, axle configuration: 6x4, wheelbase: 4,580 mm, fuel: diesel, driver cabin: sleeper cab, gearing type: mechanical, emission class: euro3, total length: 81,000 mm, total width: 2,550 mm, Year of construction: 2005, Equipment: ABS, air conditioning, central locking, cruise control, electric window regulation, parking heater, = Additional Options and Accessories = - Leaf spring suspension - Power take-off (PTO) - Radio/CD player - Sleeper cab - Sun visor = Additional Information = Front axle: Steerable Number of cylinders: 6 Engine displacement: 12,130 cc Unladen weight: 14,080 kg Gedpfx Aszbk A Dsfkjbn Payload: 11,920 kg Gross vehicle weight (GVW): 26,000 kg Crane: Palfinger / Epsilon SRX 47, year of manufacture 2004 Damage: None

Condition: used, mileage: 628,354 km, power: 335 kW (455.47 HP), first registration: 11/2019, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, next inspection (TÜV): 11/2026, color: green, gearing type: automatic, emission class: euro6, total width: 2,550 mm, total height: 4,000 mm, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), parking heater, Cab L-cab StreamSpace, 2.30 m, 170 mm tunnel * Cab suspension, comfort, air-sprung * Cab rear wall, without window * External storage compartment door, left * Exterior sun visor, transparent * Air horn * Beacon * Central locking system * Comfort locking system ----* Touchscreen radio unit with Bluetooth hands-free system * MB FleetBoard * Reversing camera * Automatic climate control * Residual heat utilization * Hot water auxiliary heater, cab * Electric stationary air conditioning system * Construction site filter * Storage compartment covers, driver and passenger side * Drawers, under bed & under sill * Storage compartment flaps, above windscreen * Electric sunroof * Refrigerator, in drawer, under bed ----Electrics & electronics Additional 12 V/15 A socket in passenger footwell * Power socket 24 V/25 A in passenger footwell * Socket 24 V/15 A in right sidewall storage * Additional functions for bodybuilder * Trailer socket 24 V, 15-pin * Reversing warning system ----Safety and assistance systems Stability control assistant * Anti-roll control assistant * Lane keeping assistant * Distance control assistant * Attention assistant * Active Brake Assist 4 * Driver airbag * Speed limiter 90 km/h / 56 mph, ECE * Cruise control ----Engine OM470, inline 6, 10.7 l, 335 kW (455 hp), 2200 Nm * Engine version Euro VI, D (Truck) * High performance engine brake * Air compressor, 2-cylinder * Insect protection mesh, in front of cooling system * Regulated water pump ----Powertrain Twin-plate clutch * Transmission G 281-12/14.93-1.0 * Hydraulic Auxiliary Drive (HAD) ----Chassis Leaf/air suspension * Steerable & liftable trailing axle * Drawbar trailer coupling with Doumatik Gbsdex Tnitopfx Afken ----Palfinger M10L80 YCrane_on_2 LK: * 2 hydraulic outriggers * 4 adjustable timber bolsters (ECCO ALU 4) * Elevated seat * Wood grapple * Year of manufacture: 2019 * Operating hours: 4,459 hrs * Next inspection: * Tire size front axle: 385/65R22.5 * Tire size rear axle: 315/80R22.5 * Fuel tank: 510 L * AdBlue tank: 60 L * Gross vehicle weight rating: 26,000 kg * Tare weight: 13,630 kg * Perm. trailer load: 35,000 kg * Overall length: 10,200 mm * Safety inspection valid until: 05/2026 ----Vehicle number: 11675----Subject to errors and prior sale----Advertising and various decals digitally removed.----We are happy to assist you with all paperwork involved in purchasing a vehicle. Simply let us know your requirements and suggestions and we’ll take care of the rest. Among other things, we can offer you the following services for an additional fee:----* Trade-in of your old vehicle * TÜV/safety inspection * Complete export processing * Arrangement of financing * Application for export license plates * Transfer of vehicles * Vehicle registration * Recovery and vehicle transport ----YOUR VTS TEAM

Condition: used, mileage: 628,354 km, power: 335 kW (455.47 HP), first registration: 11/2019, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, next inspection (TÜV): 11/2026, color: green, gearing type: automatic, emission class: euro6, total width: 2,550 mm, total height: 4,000 mm, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), parking heater, The tractor unit and trailer can also be sold separately upon request. Mercedes Arocs 2546 6x4 HAD (Vehicle Number: 11765) L-cab StreamSpace driver’s cab, 2.30 m wide, 170 mm engine tunnel * Driver’s cab suspension, comfort, air-sprung * Rear cab wall without window * External storage compartment flap, left * Exterior sun visor, transparent * Air horn * Rotating beacon * Central locking system * Comfort locking system ----* Touchscreen radio unit with Bluetooth hands-free system * MB FleetBoard * Reversing camera * Automatic climate control * Residual heat utilization * Additional water heating, cab * Electric stationary air conditioning * Construction site air filter * Storage compartment lids, driver and passenger side * Drawers under bed & under window ledge * Overhead storage compartments above windscreen * Electrically operated tilting roof * Refrigerator, drawer type, under bed ----Electric and electronics: additional 12 V/15 A socket, passenger footwell * Power socket 24 V/25 A, passenger footwell * Socket 24 V/15 A, right sidewall storage * Additional functions for bodybuilder * 15-pin trailer socket, 24 V * Reverse warning system ----Safety and assistance systems: Stability control assistant * Anti-roll assistant * Lane keeping assistant * Distance assistant * Attention assistant * Active Brake Assist 4 * Driver airbag * Speed limiter 90 km/h / 56 mph, ECE * Cruise control ----Engine: OM470, I6, 10.7 L, 335 kW (455 hp), 2200 Nm * Euro VI D engine spec (Truck) * High performance engine brake * Two-cylinder air compressor * Insect protection grille, in front of radiator * Regulated water pump ----Drivetrain: twin-disc clutch * Transmission: G 281-12/14.93-1.0 * Hydraulic Auxiliary Drive (HAD) ----Chassis: leaf/air suspension * Steerable and liftable trailing axle * Drawbar coupling with Doumatik ----Palfinger M10L80 YCrane on 2 LK: * 2 hydraulic outriggers * 4 adjustable timber stanchions (ECCO ALU 4) * Logging seat * Timber grab * Year of manufacture: 2019 * Operating hours: 4,459 h * Next inspection: Technical data * Front axle tyre size: 385/65R22.5 * Rear axle tyre size: 315/80R22.5 * Fuel tank: 510 l * AdBlue tank: 60 l * Permissible gross weight: 26,000 kg * Curb weight: 13,630 kg Gsdpfx Ajx Tylgsfkobn * Permissible towing capacity: 35,000 kg * Overall length: 10,200 mm * Safety inspection due: 05/2026 -----Janzen System T19 tandem timber trailer (Vehicle Number: 11676) * 4 adjustable stanchions ECCO ALU 4 * Wabco SmartBoard * SAF axles with disc brakes * First registration: 01.11.2019 * Total length: 7,650 mm * Perm./tech. gross weight: 18,000/19,000 kg * Curb weight: 2,950 kg * Tyre size: 385/65R22.5 * MOT: 11/2026 * Safety inspection: Vehicle number: 11675+1167----Subject to errors and prior sale----Advertising and lettering have been digitally removed.----We are happy to assist you with all necessary formalities involved in the purchase of a vehicle. Simply let us know your requirements and suggestions and we will take care of the rest. Among other things, we can offer you the following services for an additional fee:----* Trade-in of your old vehicle * TÜV/safety inspections * Complete export processing * Arrangement of financing * Application for export number plates * Vehicle transfer * Vehicle registration * Vehicle recovery and transport ----YOUR VTS TEAM

Condition: used, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 11/2019, next inspection (TÜV): 11/2026, total width: 2,550 mm, total height: 3,900 mm, ----* Tire size: 385/65 R22.5 Gbedpfxoydhfuj Afkjn * Technical gross weight: 19,000 kg * Unladen weight: 2,950 kg * Overall length: 7,650 mm * Safety inspection due: Vehicle number: 11676 ----Subject to errors and prior sale----Advertising and various inscriptions have been digitally removed.-----We are happy to assist you with all the formalities involved in purchasing a vehicle. Simply share your requests and suggestions with us, and we will take care of the rest. Among other things, we can offer you the following services for an additional fee:----* Trade-in of your old vehicle * TÜV / safety inspection * Complete export processing * Financing arrangements * Application for export license plates * Vehicle transfer * Vehicle registration * Recovery and vehicle transport ----Your VTS Team

Condition: used, mileage: 246,523 km, power: 368 kW (500.34 HP), first registration: 08/2017, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, brakes: retarder, color: blue, gearing type: automatic, emission class: euro6, loading space length: 5,300 mm, loading space width: 2,540 mm, Equipment: ABS, air conditioning, all wheel drive, crane, electronic stability program (ESP), navigation system, soot filter, MAN 28.500 TGS timber transporter with Epsilon timber crane 6x4-4 all-wheel drive Suspension: leaf-air Gbjdpsvklm Esfx Afken Wheelbase: 3.90 m Palfinger EPSILON Type: M120Z96 2x hydraulic extensions 2x hydraulic support legs 1x grapple Equipment: - Digital tachograph - Seat heating - Lift and steering axle - Radio-media-AUX-Bluetooth - Electric windows - Sunroof - Sun visor - M.F.H. - Trailer coupling (2x air, ABS, electrical connection) We are also happy to assist you with financing/leasing through our partners. All information without guarantee. Subject to errors and prior sale.

Condition: used, mileage: 847,500 km, power: 552 kW (750.51 HP), first registration: 12/2015, fuel type: diesel, axle configuration: 6x4, fuel: diesel, color: other, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, Year of construction: 2015, Equipment: ABS, crane, electric window regulation, fog lights, parking heater, power assisted steering, power mirror, spoiler, = Additional options and accessories = - Air horn - Air suspension - Alloy wheels - High Beams - Immobilizer - I shift - PTO - Radio CD player - Refridgerator - Roof Spoiler - Sleeping cabin - Speed limiter - Sper - Toolbox = Remarks = Volvo FH750, Gbsdpezbmqwofx Afken 29-12-2015, 847500 km, Euro 6, 6x4, I-Shift, Dynamic steering, Loglift loading crane (2007) = More information = Front axle: Steering Rear axle 1: Double wheels Rear axle 2: Double wheels GVW: 29.000 kg Crane: year of manufacture 2007 Extendable superstructure: Yes = Dealer information = Bank data: Rabobank Account: 39.33.10.655 IBAN: NL73RABO0393310655 Swift code: RABONL2U - Always check our bank details before transaction! - Reservation of vehicles is not possible without a deposit. - Writing and text errors are reserved for all vehicles offered.

Condition: excellent (used), PRIMULTINI Band Saw Line SIC 1600 – CFE - IFB 1. PRIMULTINI Band Saw SIC 1600 -Roll diameter 1600 mm -Roll width 245 mm -Motor 75 kW 2. PRIMULTINI Band Saw Carriage Type CFE -3 Clamping Blocks -Max. Log Diameter 1000 mm 3. PRIMULTINI Operator's Cabin Complete with Control System 4. Complete Conveyor System -Cross Feed Conveyor, 4-strand, Length approx. 12 m -Hydraulic Log Feeder -Movable Unloading Roller Conveyor with Pressure Rollers -Cross Reloading Conveyor -Conveyor Belt Under the Roller Conveyor for Slabs Gbsdpfx Aev R Edqjfkon -Vibrating Table for Slabs -Roller Conveyor with Cross Unloading -Roller Conveyor with Cross Unloading The complete system was built in 1999

Condition: used, maximum load weight: 35,870 kg, overall weight: 42,000 kg, axle configuration: 3 axles, first registration: 10/2021, next inspection (TÜV): 04/2027, loading space length: 14,000 mm, Year of construction: 2021, Equipment: ABS, DOLL Type H3L ? 14XL 3-axle Timber Stake Semi-Trailer, extendable by 3.5 m to a maximum total length of 12,950 mm, platform in bolster design, 6x ExTe steel bolster bodies Type 144-S with Ecco-Steel square stakes, various lashing points on the frame, possible log transport lengths: 2x 6m, 2x 5m, 3x 4m, 3x 3m, and long logs up to 14m, SAF axles 3x 9,000 kg with air suspension, lift and lowering function, ABS, disc brakes with EBS, 1st axle liftable, last axle self-steering, WABCO brake system with WABCO 'SmartBoard' control unit for air suspension, load pressure gauge, odometer, etc., plastic tool box on the left rear side, LED rear lights and LED work lights, 385/65 R 22.5 tires // 6 units, technically permissible gross weight 42,000 kg, unladen weight 6,130 kg, one owner, good overall condition, German vehicle with German registration documents! Sale to trade only! All information subject to change! Errors and prior sale excepted! Gjdpfx Afsyqcbqokjbn

Condition: used, first registration: 01/2018, fuel type: diesel, brakes: other, color: red, driver cabin: other, gearing type: automatic, emission class: none, suspension: other, Equipment: crane, Kesla 2124L Crane Year of manufacture: 2018 High seat operation Including timber grab Gbsdsxrdcqjpfx Afkon 2-point support 4.00 m / 6,050 kg 7.00 m / 3,500 kg Export / net price: €9,900 All information provided without guarantee, subject to errors.

Condition: used, overall weight: 24,000 kg, axle configuration: 3 axles, first registration: 04/2015, loading space length: 7,500 mm, Year of construction: 2015, Equipment: ABS, Manufacturer Menke-Janzen Model 24 t. 3 axle Woodtransport / Holztransport Year 2015 Condition Good Serial Number W09W01327FWJ16483 Ref. nr. 7984 1 reg. Disc brake: ? ABS: ? Gbsdpfx Aexiucvsfken Axles: ROR Suspension: Air Tire Size: 275/70R22,5 Tire % back 50 - 70 - 70% Toolbox: ? Total weight: 24000 kg. Weight: 6140 kg. Load capacity 17860 kg. Inner length: 7600 mm.

Condition: used, maximum load weight: 33,780 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 10/2019, total width: 2,550 mm, total height: 4,000 mm, Equipment: ABS, Schwarzmüller timber semi-trailer with bolster and stakes * BPW axles with air suspension and disc brakes * 1st axle liftable * Spare wheel holder * Tyres 385/65R22.5 * Aluminium rims * Work lights * 2x storage compartments * Jost landing gear Gbjdpeyld U Ijfx Afken For further information, please feel free to contact us.

Condition: used, maximum load weight: 31,170 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 05/2022, next inspection (TÜV): 02/2026, loading space length: 13,000 mm, total width: 2,550 mm, total height: 4,000 mm, Equipment: ABS, 3-axle timber transport trailer * 8x OptiPa bolsters * 16x OptiPa one-piece aluminum stanchions * Stable aluminum bulkhead at the front approx. 2500 mm high * Maximum fifth wheel load approx. 12000 kg Gbsdpox H E Hpsfx Afken * Front overhang (kingpin to front edge of KoRa) 1550m * Air suspension with 3x 9t axles from SAF * Axle reinforcement for off-road * Axle lift first axle, automatic function, with traction aid * Scales * Total weight technically possible 39,000 kg * WABCO Smart Board * EBS braking system * All cables are protected inside the longitudinal beams * Smooth sheet metal cover 3mm welded through between the longitudinal beams * Tires: 6x branded tires size 385/65 R 22.5 * LED reversing lights and work lights * LED tail lights and Position lights * Plastic fender, 180 degrees, above each axle * Underrun protection made of round tube, mounted as high as permitted * Maneuvering coupling at the rear * Ten welded ring elements for lashing on each side * 2x toolbox approx. 600x400x400, plastic * Side impact protection made of anodized aluminum * KTL coating with zinc phosphating, maximum corrosion protection Also available for rent at short notice. We are happy to provide you with further information

Condition: new, maximum load weight: 30,300 kg, overall weight: 36,000 kg, axle configuration: 3 axles, loading space length: 13,000 mm, Year of construction: 2026, Equipment: ABS, 3-axle timber transport trailer * 8x OptiPa stool bodies * 16x OptiPa one-piece aluminum stanchions * Sturdy aluminum front wall approx. 2500 mm high * Max. fifth-wheel load approx. 12000 kg * Front overhang (kingpin to front edge of KoRa) 1550m * Air suspension with 3x 9t axles from SAF * Axle reinforcement for off-road * Axle lift first axle, automatic function, with starting aid * Scales * Total weight technically possible 39,000 kg * WABCO Smart-Board * EBS brake system * All cables are protected inside the side members * 3 mm smooth sheet metal cover welded through between the side members * Tires: 6x brand-name tires size 385/65 R 22.5 * LED reversing lights and work lights * LED tail lights and position lights * Plastic mudguards, 180 degrees, above each axle * Round tube underride guard mounted as high as permitted * Maneuvering coupling at the rear * Ten welded ring elements for lashing on each side * 2x toolbox approx. 600x400x400, plastic * Anodized aluminium side bumpers * KTL coating with zinc phosphating, highest corrosion protection Gbsdsi Rtgqjpfx Afkjn Also available for hire at short notice. Further information on request.

Condition: used, empty load weight: 5,100 kg, maximum load weight: 32,900 kg, overall weight: 38,000 kg, axle configuration: > 3 axles, first registration: 08/2018, suspension: air, tire size: 385/55 22,5, tire condition: 50 %, color: other, Year of construction: 2018, front tire size: 385/55 22,5, rear tire size: 385/55 22,5, driver cabin: day cab, emission class: none, Equipment: ABS, truck registration, Reference number for inquiries: 69803 Fliegl, SDS01 * Year of manufacture: 2018 * ABS, Anti-lock Braking System * EBS, Electronic Braking System * Air suspension * Lift axle * Air connection couplings (red and yellow) * 15-pin connector plug * Lifting and lowering mechanism * Suspension: Air * Total weight: 38,000 kg * Unladen weight: 5,100 kg * Payload: 32,900 kg * Permissible total weight: 38,000 kg * Axle manufacturer: SAF * Tyre condition 1st axle: 70% – 70% – Tyre size: 385/55 R22.5 * Tyre condition 2nd axle: 30% – 30% – Tyre size: 385/55 R22.5 * Tyre condition 3rd axle: 50% – 50% – Tyre size: 385/55 R22.5 * Tyre sizes: 385/55 R22.5 * Fliegl container chassis * 40" container platform for timber and metal, manufacturer: S Grabmeier * Unladen weight: 4,600 kg, front wall height: 2,040 mm * 6 pairs of lashing rings for rail transport * Frame height: 500 mm, wooden superstructure with 8 pairs of Ecco Steel stanchions on container chassis * Stanchion height: 1,980 mm * Special features: Lift axle / timber transport / SAF axle Disclaimer: Subject to change, prior sale and errors excepted. More photos and videos can be found on our website. Our comprehensive services include for example: * Purchase / sale / rental of commercial vehicles * Fast, easy financing options * Processing of all (export) documents * Ordering of export plates / customs plates * Vehicle preparation: new tarpaulins, signage, painting, etc. * Professional loading / cargo securing * TÜV inspections, registration services * Transfer of commercial vehicles Ask our trained staff, we are happy to advise you. Gjdpfoyib Iqox Afkobn