Complete sawline for big logs

AKE,Söderhamns, Remill, Catech, Ari

Condition: used, No. 3264 Complete sawmill Möhringer / Paul Used, still connected to power until 30.06.26 Consisting of: - Log crosscut table with driven tapered rollers Length measurement Hecht with remote-controlled photoelectric sensors - 1 cross conveyor to the frame saw, 7000 x 5500 mm LW Cam chains in mint condition - 1 cross conveyor, 3800 x 4000 mm LW - 1 roller conveyor in front of the frame saw, length 12400 mm, roller width 1400 mm With hydraulic lowering and lifting for sawn timber, cross-discharge with 2 flap gates - Quick-clamping frame carriage EWD with auxiliary carriage - 1 auxiliary conveyor for log feeding in front of the frame - Root reducer Möhringer - Frame saw Möhringer B 75-55 Multi-BV, year of construction 1994 Passage 700 mm, stroke 550 mm, saw blades hydraulically adjustable, conveyor belt, log loading device with adjustable laser, round timber measurement Hecht, clamps Jansen, hooks, 60 saw blades, adjustment gauge - Powered splitting wedge with chain bed Möhringer 230-292, year of construction 1994 With pre-cutting, photoelectric sensors, and laser for adjustment Kjdeyzr Tfopfx Aa Iodn - 1 roller conveyor 4000 x 1400 mm LW, with grooved rollers, cross-feed with pneumatic cylinders - 1 S-conveyor with storage 3500 x 4000 mm LW, flights Albert made of square tube - 1 S-conveyor 3000 x 5500 mm LW, motor with adjustable slip clutch, function monitoring, drive elements made of angle iron - 1 under-table cross-cut saw Paul 15 AO, year of construction 1992 - 1 double edger Paul KME 2 / 750 R, year of construction 1988 With splinter separator, right-hand side unit electrically adjustable, through-feed cross-cut unit, length sorting system, preselection programs Österle - 1 conveyor belt 7400 x 400 mm LW - 1 conveyor belt 4000 x 400 mm LW - 1 conveyor belt 3000 x 500 mm LW - 1 trough conveyor approx. 6500 x 500 mm LW, ascending, for sawdust - 1 trough conveyor HOLTEC approx. 6500 x 500 mm LW, ascending, for wood chips - 1 trough conveyor HOLTEC, horizontal, with left and right rotation as a distributor over the boxes - Drum chipper HAAS, feed width 600 mm, feed height 150 mm, with vibrating chute - Frame saw sharpening machine OPL - Saw blade tooth setting machine VOLLMER GSA, year of construction 1996 - Frame saw sharpening machine VOLLMER (needs minor repairs, push cylinder bent) Sale on behalf of customer, ex location near 34125 Kassel, without dismantling, without transport and assembly Dismantling, loading, and transport by us optionally available Subject to errors in the description and price To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical specifications, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Pictures and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices plus VAT, payment before collection or shipment Terms of delivery: ex location

Condition: used, Year of construction: 2006, functionality: fully functional, center height in crank: 1,100 mm, workpiece weight (max.): 180,000 kg, grinding length: 11,000 mm, grinding wheel diameter: 1,066 mm, total length: 11,700 mm, quill travel distance: 11,700 mm, workpiece weight between centers: 180,000 g, distance between centers: 11,700 mm, POMINI CNC Roll Grinder Model HD-425-2-7L Ksdpfewdmy Sex Aa Iodn Siemens 840D, 12 Axes. Built in 2006. Two flatbed system grinding and workpiece ways are separate. Machine accuracy. Straightness 0.001-0.002 mm/m. Roundness 0.001-0.002 mm. Eccentricity 0.002 mm. Profile for crown height up to 0.1 mm ±0.002 mm/m. Surface finishing without chatter marks and no feed marks after finishing grinding stage. On an independent bed: Auto Caliper Diameter 870 - 2,250 mm. Eddy current crack and bruise detector probe. Ultrasound depth probe up to 180 mm. High Pressure wheel cleaner. Wheel dynamic balancing electromagnetic automatically or manually. Wheel dressing device with diamond. 2 Hydrostatic Steadies. 2 Hydrodynamic Steadies. 4 Soft landing for roles. Wheel quick change device incl motor. Jib crane. Vibration Measurement, recording on: Headstock base Neckrests Foot stock Wheel head Wheel head back Carriage Lateral side. Working Capacity. Grinding length 11,000 mm Max diameter with 1,066 mm Grinding wheel 2,200 mm Min diameter with 1.066 mm Grinding wheel 800 mm Center distance 11,700 mm Max Roll weight 80 Tons Max Roll weight with Steadies 180 Tons Min distance between wheel center and roll axis 845 mm Max distance between wheel center and roll axis 1,635 mm Carriage Axis Z, Hydrostatic Feeds, Infinitely variable 0-6,000 mm/min Oil film thickness 0.020 mm Distance between carriage ways 1,500 mm Ways width 160 mm Total length of the carriage on ways 3,385 mm Wheelhead on Carriage Axis X, Wheel Probe Axis A, Inspector Axis A1, Wheelhead cross travel Ballscrew, Axis X 940 mm Resolution axis X 0.0001 mm Wheel Spindle length 1,695 mm Spindle bearing, hydrostatic, diameter 254 mm Resolution Infeed micrometer handwheel, Axes X 0.00001 mm / division Continuous wheel infeed, U axis on radius 0 - 0.35 mm/min Rapid wheel indeed, axes X 0-830 mm/min Wheel motor, AC 130 kW Wheel Speed 400-1,100-1,600 rpm Wheel Cutting Speed infinitely variable Surface speed wheel diameter 1,066 mm 45 m/sec Surface speed wheel diameter 670 mm 45 m/sec Wheel hole, diameter 508 mm Wheel thickness 76 - 152 mm Wheel diameter 670 - 1,066 mm Crowning, Axis U. Max crown on the diameter 10 mm Max concavity on the diameter 10 etc Head stock Workpiece rotating speed 5 - 50 rpm Headstock motor 200 kW Max transmissible torque 76.5 kNm Faceplate control system V Belts Max Center diameter, metric type 160 mm Stroke of Quill 150 mm Length of headstock 3,110 mm Tail stock Quill diameter 260 mm Stroke of quill 750 mm Maximum center diameter, metric type 160 mm Taper Metric 5% on the diameter Tailstock length 1,300 mm Stroke of tailstock 8,000 mm Caliper, Arm Axis C, Carriage Axis V, Rotation Axis B. Max measurable diameter 2,250 mm My measurable diameter 870 mm Machine Dimensions. Machine weight 130 tons Length 19.5 m. Width 5.5 m. Height 3.2 m. Foundation depth 3.8 m.

Condition: new, Year of construction: 2026, functionality: fully functional, power: 11 kW (14.96 HP), A triple pass rotary drum dryer is a type of industrial dryer that is used to reduce or remove moisture from a material. It gets its name from the three rotating drums through which the material passes, each with a different purpose in the drying process. This type of dryer is commonly used in the production of various bulk solids, including minerals, agricultural products, and biomass. Here are the key features and components of a triple pass rotary drum dryer: 1. Triple Pass Design: - The material being dried passes through three rotating drums or cylinders, hence the term "triple pass." Each drum serves a specific purpose in the drying process. 2. Material Flow: - The material enters the dryer and first passes through the innermost drum. After the initial drying phase, it moves to the middle drum and then to the outer drum, undergoing additional drying in each pass. 3. Heat Source: - Heat is typically provided by a combustion system, such as a burner or furnace, located at one end of the drum dryer. The hot gases generated by the combustion process flow through the rotating drums, transferring heat to the material. 4. Air Flow: - The dryer is designed to optimize air flow through the drums, ensuring efficient drying. In a triple pass design, the material and hot gases move counter-currently through the three drums, enhancing heat transfer and drying efficiency. Ksdpeq Nfuzefx Aa Iedn 5. Lifting Flights or Lifters: - Lifters are internal components inside the drums designed to lift and cascade the material as it rotates. This movement promotes good heat transfer and uniform drying. 6. Retention Time: - The triple pass configuration allows for an extended retention time of the material in the drying system. This longer exposure to heat enhances the drying efficiency, making the triple pass rotary drum dryer suitable for materials with high moisture content. 7. Cooling Section: - After the material completes the three passes and reaches the end of the drum dryer, a cooling section may be included to reduce the temperature of the dried material before it is discharged. 8. Applications: - Triple pass rotary drum dryers are used in various industries, including agriculture (drying crops like grains), minerals (drying ores or concentrates), and biomass (drying wood chips or other organic materials). 9. Efficiency and Energy Consumption: - Triple pass rotary drum dryers are known for their high efficiency due to the extended drying time and effective heat transfer. However, they may have higher energy consumption compared to single or double pass dryers. When selecting a triple pass rotary drum dryer, it's essential to consider factors such as the type of material to be dried, required moisture reduction, and overall processing requirements. Proper design and operation are crucial to achieving optimal drying performance. Technical details We have different options for different requirements, please contact our team for more info.

Condition: good (used), Pallet racking system with chipboard decking according to your needs. Frame height, frame depth, beam length is also according to your requirements. Send your enquiry and we plan your system accordingly. Kdedsd Duc Tepfx Aa Isn

Condition: new, functionality: fully functional, Randek Truss System NT produces roof trusses using C-press heads, movable magnetic fixtures on a steel floor and one of our many crane systems. Crane systems: Wall mounted crane Column crane Motorized overhead crane Counter balanced crane Press head: 23T, 27T, 35T, 50T Laser system as an option. Kdedpfx Ajxwkuqsa Ion

Condition: excellent (used), Year of construction: 1995, functionality: fully functional, Log feeder, chain log infeed, and chain log conveyor – 20 m Minimum log length: 5 m Kdedpfxswlaxkj Aa Ion Maximum log length: 14 m Holtec ES 120 – Cross-cut saw (Year of manufacture: 1995) For cutting and trimming wood in industrial applications Chain log conveyor – 4 m Cassel Metal Shark® Octa – Metal detector Outfeed roller conveyor + transfer table – 7 m Control cabin Hydraulic operation Condition: perfect Manufacturer: Holtec Type: ES120 Year of manufacture: 1995

Condition: like new (used), Year of construction: 2019, Used belt dryer New eco tec Model Woody 500-100-1.0 SP Kdedpsvrd Uqsfx Aa Ijn Produced in 2019. Like new.

Condition: new, Year of construction: 2008, functionality: fully functional, machine/vehicle number: 2008-176, The Cambio 500 (Söderhamn Eriksson) is a debarker for small logs up to 495 mm (20 inches) in diameter. It operates at feed speeds of up to 120 m/min (393 ft/min). Thanks to its reliability, minimal maintenance requirements, and ultra-low operating costs, the Cambio 500 is the first choice for leading wood processing companies worldwide. Its triangular feed system and carbide-tipped debarking tools, powered by compressed air, are among the key features that ensure superior debarking results. Kdjdoyl Aqhspfx Aa Ijn Complete with a feed conveyor. The machine was not in operation and was in storage.

Condition: used, Year of construction: 1990, MAN 125KVA diesel generator Kdjdpfx Aew U N Dasa Ion

Condition: good (used), Year of construction: 2001, functionality: fully functional, Used pellet mill OGM 1,5 with 75 kw main engine. Capacity from wood about 1 tone/hour. Kdsdpjx R Suzofx Aa Ijn Include a lot of spare part: - new ring die 6mm for wood: Salmatec Brand ( price from manufactory 2700 eur for 1). - New bearing for roller 10 pcs. - New roller shell 10 pcs. - other spare parts, main axhis, plates for rolles.