Used Drum Chipper for sale (3,315)

Condition: refurbished (used), Year of construction: 1990, Drum chipper / chipping machine / wood shredder fully reconditioned (workshop-reconditioned) Make: Rudnick & Enners Year of manufacture: 1990 Rudnick & Enners drum chipper, type TH-200/650/3 workshop-refurbished (fully reconditioned) with new bearings (spherical roller bearings) and tested rotor New blades and counter-blades Feed width/height: 650 x 200 mm Rotor diameter: 600 mm Screen mesh size: 50 x 50 mm Drive power: 75.0 kW Ijdpfx Aozq Sqgskpetn Feed motors: 2 x 3.0 kW Weight: approx. 3,500 kg Machine colour: RAL 6011 Reseda green Without electrical installation and without control cabinet

Condition: used, BRUKS 1700 ML industrial drum chipper designed for processing logs, slabs, offcuts and other wood waste into high-quality wood chips. Suitable for demanding sawmill and biomass production. Technical specifications: Manufacturer: BRUKS Model: 1700 ML Isdpfjzpwaqjx Akpjtn Capacity: up to 100 m³/h Chip length: 15–30 mm (up to 50 mm) Chipper disc diameter: 1700 mm Number of knives: 4 Knife dimensions: 525 × 180 × 16 mm Disc speed: 530 rpm Infeed opening: 500 × 300 mm 2 upper and 6 lower feed rollers Feed drive power: 2 × 4 kW Required chipper motor power: 75–150 kW Weight: approx. 5 500 kg

Condition: used, Drum wood chipper IDC000024 - Manufacturer: Erjo, - Model: 204 MA, Ijdpfx Aetqz Sbskpetn - Capacity: 20 - 40 m3/val., - Weight: 3000 kg, - Electric motor: 30 kW.

Condition: ready for operation (used), Drum chipper type Bruks type 1202 CS6 for production of high quality pulp chips from bulky mixed waste such as: Edgings, slabs, trim ends, plywood, veneer and joinery waste and log tops. The chipper can produce pulp and board chips, or fuel chips. Capacity up to 50 m3 chips per hour With bigger electrical motor up to 100 m3 of chips per hour Electrical motor 75 kW Itjdpfxouhvhps Akpsn

Condition: good (used), Year of construction: 2006, Drum chipper, high-speed with horizontal infeed max. infeed width 450 mm max. infeed height 140 mm Motor 75 kw with frequency converter for variable speed Isdpfx Aeu Rl Ruokpotn no vibrating chute included

Condition: as good as new (ex-display), Year of construction: 2026, S&F drum chipper type ATH 220x530/3 Demonstration machine / trade fair machine / new machine Solid design with long service life Feed height: 200 mm Feed width: 500 mm Number of chipper knives: 2 pieces Number of counter knives: 1 piece Rotor diameter: 520 mm (solid steel rotor) Number of feed rollers: 3 pieces Throughput rate: up to approx. 20 rm/h * Chipping length: approx. 30 mm Chipper drive power: 45 kW or on request Feed roller drive power: 2 x 2.2 kW Operating/control voltage:400/220 V, 50 Hz Weight: 2,600 kg *depending on chipper length, kW main motor, number of knives, feed S&F chippers and drum chippers with horizontal infeed are used in many areas of the wood processing industry (sawmills, timber mills). Chippers from the ‘ATH’ series produce high-quality and homogeneous wood chips with a low proportion of fines from residual wood, for example as quality chips for the cellulose industry or as fuel chips for energy generation Advantages: Ijdpfxsw I R Rne Akpotn - Maximum throughput - Low fines content - Low maintenance - Flexible use - Customised production

Condition: new, Exhibition machine Infeed width: 1,400 mm Infeed height: 550 mm Rotor diameter: 1,600 mm Rotor knives: 4 pcs Stator knife: 1 pc, externally adjustable Infeed unit: 2 x 5 rollers Motor: 250-500 kW Itedpfxsgabfbs Akpon Machine weight: approx. 30,000 kg

Condition: excellent (used), Catalog number: 7924 TECHNICAL DATA dimensions of the top of the loading hopper length/width 500x600mm hopper length 2070mm shaft width 550mm engine 55kW number of knives 4 pcs outlet for shredded wood rectangular 560/360mm dimensions length/width/height 3950x1520x2820mm weight approximately 2500kg – drum chipper – 4 knives on the shaft – additionally, a built-in fan for blowing out wood chips Iedpfx Akezr U Uqepjtn – very good condition – used chipper Net price: 23900 PLN Net price: 5558 EUR Net price calculated at an exchange rate of 4.30 PLN/EUR (the price may change in the event of significant exchange rate fluctuations)

Condition: new, Year of construction: 2026, Drum chipper series ATH S&F chippers and drum chippers with horizontal infeed are used in many areas of the wood processing industry (sawmills, timber mills). Chippers from the ‘ATH’ series produce high-quality and homogeneous wood chips with a low proportion of fines from residual wood, for example as quality chips for the cellulose industry or as fuel chips for energy generation ATH 220 series - Feed height: 200 mm - Feed width: 500 | 700 | 1000 mm - Number of chipper knives: 2 - 4 pieces - Number of counter knives: 2 pieces - Rotor diameter:520 mm - Number of feed rollers: 3 pieces - Throughput: up to approx. 40 rm/h * - Chipping length: 5 - 50 mm - Chipper drive power: 22 - 110 kW - Drive power feed rollers: 2 x 2.2 kW - Operating/control voltage: 400/220 V, 50 Hz - Weight: 2,800 - 4,000 kg ATH 330 series - Feed height: 300 mm - Feed width: 500 | 700 | 1000 mm - Number of chipper knives: 2 - 6 pieces - Number of counter knives: 2 pieces - Rotor diameter: 700 mm - Number of feed rollers: 3 pieces - Throughput capacity: up to approx. 70 rm/h * - Chipping length: 5 - 80 mm - Chipper drive power: 37 - 250 kW - Drive power feed rollers: 2 x 3.0 kW - Operating/control voltage: 400/220 V, 50 Hz - Weight: 3,500 - 5,000 kg Iedsuz Hmxepfx Akpotn *depending on chipper length, kW main motor, number of knives, feed Advantages: - Maximum throughput - Low fines content - Low maintenance - Flexible use - Customised production

Condition: excellent (used), Year of construction: 1974, Catalog number: 7685 TECHNICAL DATA - inlet width: 440mm - inlet height: 300mm Itodpfxszruc Us Akpsn - shaft width: 480mm - shaft diameter: 440mm - number of knives: 2 pcs - screen dimensions: 50x50mm - toothed drive shaft, top and bottom - shaft motor: 0.78/1.1kW - electric auto-reverse (with adjustable speed) - with conveyor belt - length of feed belt: 4006mm - width of feed belt: 380mm - belt feed direction: forward/reverse - main motor: 30kW - dimensions (L/W/H): 6100x1100x1100mm - weight: approximately 2000kg ADVANTAGES - German-made - with conveyor belt - auto-reverse - used shredder, very good condition Net price: 76,900 PLN Net price: 17,880 EUR, depending on the exchange rate of 4.3 EUR (Prices are subject to change due to significant exchange rate fluctuations)

Year of construction: 2024, condition: new, - 150 mm infeed high - 430 mm infeed width - 30 mm chips - 2 knives - 440mm diameter Rotor - 590 U/min Rotor - 30 m/min Feed speed Ijdpfx Aeful Uijkpjtn - 37 KW Mainmotor - 3 KW + 2,2 KW infeed roller Gearboxes - 6.000 mm conveyor belt - 2.000 mm discharge conveyor belt

Condition: used, Year of construction: 2022, operating hours: 100 h, functionality: fully functional, type of input current: three-phase, input current: 30 A, input frequency: 50 Hz, input voltage: 400 V, Fully automatic filling machine from the Boloni brand. ATEX-certified. Suitable for filling 25L containers. Filling by weight using load cells. The machine fills 4 containers simultaneously. Automatic capping and palletizing robot. Connection between the various components via conveyor belts (steel). The machine has only been used for a limited number of hours. The machine is available for immediate delivery. Iodpfxszx Urio Akpstn

Year of construction: 2024, condition: new, - Chopping height 240 mm Isdponyidbsfx Akpjtn - chopping width 540 mm - chopping length approx. 25-35 mm - Number of chopping knives 2 - rotor diameter 600 mm - rotor speed 590 rpm - feed motors 4 + 3 KW - main motor 45 KW / 55KW / 75 KW - 6.000 mm infeed conveyor belt - 2.000 mm conveyor belt underneath the machine

Condition: refurbished (used), Year of construction: 2024, functionality: fully functional, machine/vehicle number: 66184003, type of input current: three-phase, The details pertaining to the machine are provided below. 1)The quoted price pertains to the machine labeled as No. 1 in the drawings provided in the images. 2)The other units shown in the image, which are designed to operate synchronously with the machine, can also be quoted upon request. -Unit No. 2 functions as a large vibration conveyor and is the initial unit onto which the logs are loaded. -Unit No. 4 is used as a small vibration conveyor and includes a screen for separating smaller products. -Unit No. 5 is a product transfer conveyor equipped with a metal detector unit. -Unit No. 3 is a screw conveyor. It is positioned beneath Machine No. 1 and transfers the chips to the product transfer conveyor. -Unit No. 6 transports the produced chips to the designated area. Chipping Height : 380mm Chipping Width : 650mm Rotor - Diameter : 1200mm Number of Knives : 3 chipping knives and 1 counter-knife Infeed Capacity : Approx 30-40 t/h (Depends on kind of material, material mixture, type of feeding and humidity) Isdpfx Akjw U A Skepjtn Chipping Length : Approx. 25mm Electric Motor : 2 x 125kW Voltage : 380-400V Geared Motors : 2 x 11kW Sew Eurodrive Infeed Rollers : 9 Pcs Feeding : Horizontal Drive : By Belt

Condition: excellent (used), CATALOGUE NUMBER 7899 Technical data: - inlet cross-section of the chipper: 410mm x 180mm - shaft width: 430mm - shaft diameter: 400mm Isdpfezu R Urox Akpotn - number of knives: 2 pcs - screen size: 60x60mm - top: driving shaft, toothed - bottom: 2 driving shafts, toothed - length of the infeed conveyor: 2180mm - width of the infeed conveyor: 400mm - auto-reverse (adjustable) - main motor: 30kW - feed motor: 2 x 2.2kW - machine dimensions (L/W/H): 4300x1600x1100mm - weight: approximately 2000kg ADVANTAGES: - Polish production - Auto-reverse (adjustable) - With infeed conveyor - DTR documentation - Used chipper, very good condition Net price: 69900 PLN Net price: 16256 EUR, depending on the exchange rate of 4.30 EUR (Prices are subject to change due to exchange rate fluctuations)

Condition: new, Year of construction: 2026, Drum chipper series ATH-220/530/3 | ATH-220/730/3 | ATH-220/1060/3 S&F chippers and drum chippers with horizontal infeed are used in many areas of the wood processing industry (sawmills, timber mills). Chippers from the ‘ATH’ series produce high-quality and homogeneous wood chips with a low proportion of fines from residual wood, for example as quality chips for the cellulose industry or as fuel chips for energy generation Itodpfowbv Ersx Akpen Series ATH-220/530/3 | ATH-220/730/3 | ATH-220/1060/3 - Feed height: 200 mm - Feed width: 500 | 700 | 1000 mm - Number of chipper knives: 2 - 4 pieces - Number of counter knives: 2 pieces - Rotor diameter:520 mm - Number of feed rollers: 3 pieces - Throughput: up to approx. 40 rm/h * - Chipping length: 5 - 50 mm - Chipper drive power: 22 - 110 kW - Drive power feed rollers: 2 x 2.2 kW - Operating/control voltage: 400/220 V, 50 Hz - Weight: 2,800 - 4,000 kg *depending on chipper length, kW main motor, number of knives, feed Advantages: - Maximum throughput - Low fines content - Low maintenance - Flexible use - Customised production

Condition: new, Year of construction: 2025, functionality: fully functional, machine/vehicle number: TH 600 / 1050 / 11, overall weight: 35,000 kg, type of input current: three-phase, total height: 2,310 mm, total length: 4,400 mm, total width: 2,906 mm, input voltage: 380 V, feed length X-axis: 1,054 mm, feed length Z-axis: 651 mm, The details pertaining to the machine are provided below. 1)The quoted price pertains to the machine labeled as No. 1 in the drawings provided in the images. 2)The other units shown in the image, which are designed to operate synchronously with the machine, can also be quoted upon request. -Unit No. 2 functions as a large vibration conveyor and is the initial unit onto which the logs are loaded. -Unit No. 4 is used as a small vibration conveyor and includes a screen for separating smaller products. -Unit No. 5 is a product transfer conveyor equipped with a metal detector unit. -Unit No. 3 is a screw conveyor. It is positioned beneath Machine No. 1 and transfers the chips to the product transfer conveyor. -Unit No. 6 transports the produced chips to the designated area. Chipping Height : 600mm Chipping Width : 1050mm Rotor - Diameter : 1600mm Number of Knives : 3 chipping knives and 1 counter-knife Infeed Capacity : Approx 50-150 rm/h (Depends on kind of material, material mixture, type of feeding and humidity) Isdpfx Ajw S In Ejkpjtn Chipping Length : Approx. 25mm Electric Motor : 2 x 400kW Voltage : 380-400V Geared Motors : 2 x 15kW Sew Eurodrive Infeed Rollers : 11 Pcs Feeding : Horizontal Drive : By Belt GT54 x 2

Year of construction: 2026, condition: new, functionality: fully functional, Drum for Doppstadt screener SM 518 and SM 620 on stock. CHECK AVAILABLE PERFORATIONS. We manufacture and provide drums for mobile and stationary screeners, for : - Doppstadt SM 414 - Doppstadt SM 518 - Doppstadt SM 618 - Doppstadt SM 620 - Doppstadt SM 718 Itodpfjfi Tqbox Akpen - Doppstadt SM 720 - Doppstadt SM 725 also Terra Select, Eggersmann, Pronar, Komptech , Mc Closkey... Bespoke maded drums are our specjality.. In case of any question, please contact me by mobile or e-mail.

Condition: used, mileage: 71,000 km, power: 353 kW (479.95 HP), first registration: 10/2015, fuel type: diesel, axle configuration: 6x4, fuel: diesel, emission class: euro6, total width: 2,550 mm, operating hours: 5,840 h, number of cylinders: 6, displacement volume: 12,419 cm³, nominal power: 353 kW (479.95 HP), Equipment: crane, Key Features Internal Reference: 26441M Chassis Number: WMA 26S ZZ8 FM6 655 27 Vehicle Model: TGS 33.480 6x4 Chippo 5010 / Swiss-Vehicle Vehicle Brand: MAN Product Category: Crane Truck Condition: Used Mileage: 71,000 km Hours: 5840 Emission Standard: Euro 6 Date of First Registration: 01.10.2015 Fuel: Diesel Engine Displacement (ccm): 12419 Engine Power: 480 Cylinders: 6 Axles & Tires Axle Configuration: 6x4 Axle 1: 385 / 65 R 22.5 Axle 2: 315 / 80 R 22.5 Axle 3: 315 / 80 R 22.5 Number of Axles: 3 Weights & Dimensions Vehicle Width: 2550 Superstructure Superstructure Manufacturer: Komptech Ijdpfxez Hn Eve Akpjtn Superstructure Model: Chippo 5010 C direct "Axtor" (wood chipper/shredder) Superstructure Year of Manufacture: 2015 Superstructure Equipment: Cabin control Superstructure Notes: Operating hours Komptech superstructure: 3600 h, operating hours rotor: 1450 h. Komptech serial number: 233039. Special rotor with 22 blades "Axtor shredder/chipper rotor" with blade protection, drum speed 440 1/min Cabin conversion (operable from the truck's cab) Screen baskets 60 mm / 80 mm Infeed table with folding hopper and additional stationary infeed rollers, automatically regulated infeed speed Belt discharge with remote control Cyclone separator for intake air, additional cooler Various work lights, reversing camera, overview camera, discharge pipe Control unit with cable for maintenance work (service box) Central lubrication, wood splitter, screen basket storage, toolbox Air hose reel, various accessories & wear parts Vehicle in very good condition and ready for use. Crane Crane Manufacturer: Epsilon Crane Type: M100L Crane Remote Control: Yes

Condition: used, Year of construction: 1997, operating hours: 2,500 h, Ammann AC 110 CE Year of manufacture: 1997 !!!! ONLY 2500 HOURS !!!! !!!! GERMAN MACHINE, FIRST HAND !!!! Diesel engine, 120 hp Immediately ready for use ---- Visit our website: Ijdpfx Akez S S E Eepjtn German/English/Serbian/Croatian/Bosnian/Bulgarian... Goran German/English/…? …? … Roman We will gladly assist you with financing or leasing. EU sale: net price upon presentation of company documents and VAT number. VAT deposit: 2000 € Our services for you: - Customs registration - Export documents and EUR1 - Worldwide transport - Accommodation - Transfer from Munich Airport or Passau train station

Year of construction: 2018, condition: good (used), Gimon RG1000.2000 Drum coating system Serial: 14214 2018, Stainless, consists of 1100L stainless hopper on weigh cells, feeds onto continuous conveyor scale, feeds into Gimon disc coater and into Gimon drum coater fat drum, also comes with 1000L stainless IBC previously used for oil, Itsdoz I Dt Sepfx Akpon

Condition: good (used), functionality: fully functional, total width: 2,800 mm, total height: 3,000 mm, type of input current: three-phase, input voltage: 400 V, overall weight: 3,600 kg, empty load weight: 3,600 kg, Equipment: documentation/manual, BERGMANN Roller Compactor, Roll Packer JRP 7700 - Wood and Pallet Compactor Description For sale is a robust BERGMANN Jumbo Roll Packer for shredding and compacting wood pallets and bulky wood waste, paper, and waste in open containers. The machine comes from an industrial group and was only used sporadically there. The heavy, profiled compaction roller breaks up the fed material and compacts it directly in the container. This allows for better utilization of the available container volume and reduces the number of required collections. Ideal for industrial and commercial companies, logistics companies, wood processing companies, and waste disposal companies. Condition Good, ready-to-use, and fully functional condition with typical signs of wear. Only sporadic use by the previous operator. Technical Data and Equipment Manufacturer: BERGMANN Designation: Jumbo Roll Packer Type according to operating manual: JRP 7700-42 Design: Stationary container compactor Drive: Electro-hydraulic Compaction: Profiled steel roller on the articulated arm Previous use: Wood pallets and wood waste Equipment: Hydraulic unit, control unit, and protective grating Available Documents • Documentation and operating manual • Spare parts list • Electrical wiring diagrams Itjdpfx Akoz S N Svspsn • Hydraulic diagrams Price: €14,900 net, negotiable, plus statutory VAT. Transport/shipping costs, collection. Freight transport by separate agreement; transport costs are not included in the purchase price.

Condition: used, Year of construction: 1973, operating hours: 3 h, functionality: fully functional, machine/vehicle number: GM900, total length: 17,100 mm, total height: 4,340 mm, total width: 3,363 mm, overall weight: 7,000 kg, frame height: 4,340 mm, frame width: 2,780 mm, For sale is a cross-flow shredder mounted on a VOEST GM900 frame. The cross-flow shredder can be operated with two or three chains. The shredding chamber is open and can be equipped with different grating grids. After shredding, a permanent overband magnet is installed. The system control was newly purchased and installed. The system can be disassembled for transport. Itsdpfxjz Sp Eco Akpjn

Condition: like new (used), Year of construction: 2016, overall weight: 8,200 kg, fuel type: electric, color: white, Type HX426 Blade diameter (mm) 650 Number of hammers (pcs) 30 Inlet size (mm) 1250 x 250 Screen mesh size (millimeter) 80 Length of chips (mm) 50 -80 Capacity (t / h) 8- 10 Main power (kW) 132 Feeder motor (kw) 7.5 +5.5 Discharge motor (kw) 5.5 +5.5 Oil pump motor (kw) 1.5 Length of conveyor (mm) 4000 Itodpoqmi Irsfx Akpsn Conveyor length (mm) 10000 Weight (t) 8.2 Note: capacity depends on the physical characteristics of the raw material, feeding method, feeding speed and production volume.

Condition: used, Year of construction: 2017, operating hours: 494 h, Hamm HD8VV roller, manufactured in 2017, with only 494 operating hours! ----* Manufacturer: Hamm * Type: HD8VV * Year of manufacture: 2017 * Recorded operating hours: 494 * Kubota diesel engine * Operating weight: 1,580 kg * Power: 14.8 kW * Water spray system * First owner * Good condition * Working width: 80 cm * Transport length: approx. 2,295 m * Transport width: approx. 0.938 m Iedpfxoz Ta Hys Akpotn * Transport height: approx. 1.58 m * Video available upon request (WhatsApp Erik) * Price: 10,900 euros, net + 19% VAT ----For further questions, please call: Erik Kortum: WhatsApp All information without guarantee, errors and prior sale excepted.