Used Log for sale (1,750)

Condition: good (used), Please read the technical specifications carefully. If the machine is a potential investment for you, we kindly ask that you provide full identification with a correct telephone number and email address before we can issue an offer. LOG-O-MATIC (Mainaschaff/Germany) Surface Grinding Machine FS 5030 AH Year of manufacture: 4/1991 Grinding area: approx. 500 x 300 mm Automatic vertical feed Manual longitudinal, cross, and vertical feed Accessories/Features: - Electromagnetic chuck approx. 500 x 300 mm - Manual wheel dresser on the carrier - Paper band filter - Coolant system - Machine lamp - Machine feet Additional accessories: - Side-, angle-, and radius dressing device - Balancing scale - Demagnetizing plate Dedpfsxz R Niex Ag Dsup The machine is in very good condition and comes from a training facility. Available from March 2026.

Condition: new, Year of construction: 2026, functionality: fully functional, FABO Log Washers are designed to remove woods, plastic clay contaminants and other harmful materials from gravel, stone and hard ore feeds. Dedpfx Ageyr A Tps Deup Designed to successfully clean the most difficult materials, FABO Log Washers allow the user to obtain valuable products from what was once considered waste. When selecting a Log Washer, the variety of feed material must be taken into consideration. The volume and shape of the feed material can influence the capacity of a particular size fraction. FABO can provide a list of capacities and water requirements based on the user's material. Key benefits to the buyer include improved wear characteristics, reduced costs and the ability to efficiently wash aggregates and drift out clays/sands/lights (wood/plastics) on one chassis.

Condition: used, Log table with elevator and log scanner Rema Control - logs up to 6 m - between rails 1100/1050/ 1050/1250 mm - log table length: 10 m Duodpfju Smq Ssx Ag Dop - Rema Scanner - log infeed conveyor

Condition: used, maximum load weight: 30,200 kg, overall weight: 38,000 kg, axle configuration: 2 axles, first registration: 11/2020, next inspection (TÜV): 10/2026, total width: 2,550 mm, total height: 3,900 mm, Year of construction: 2020, Equipment: ABS, 2-axle DOLL LOGO 21 with 8 bolsters First registered November 2020, from a single owner Mileage only 58,700 km Both axles with forced steering and remote control Hydraulic adjustment of the 3 rear bolsters, operated from the crane platform 2x 12 tonnes BPW axles with drum brakes WABCO Trailer EBS Length 10,715 mm Extendable from -1,800 to +4,500 mm Loading height 1,640 mm Unladen weight 7,800 kg Tires: 8x 315/80 R 22.5, tread depth 70 to 80% Dusdpfxjyr U Dge Ag Dop 8-bolt design for transporting: 4x 2-meter logs 4x 3-meter logs 3x 4-meter logs 2x 5-meter logs 2x 6-meter logs and long timber up to 21 meters 8x DOLL MAMMUT steel bolsters 16x DOLL rectangular stanchions, load capacity up to 9,000 kg per pair Full-LED lighting 4x LED work lights Central lubrication system Very good condition RENT is the new BUY, also available for RENT IMMEDIATELY-----

Condition: new, Year of construction: 2025, functionality: fully functional, CONSTMACH log washer (Pallet Washer) is a high-performance washing machine developed specifically for cleaning large aggregates with high clay content. Designed to deliver maximum efficiency under demanding working conditions, this system effectively removes dirt from the material, ensuring high-quality aggregate production in construction, mining, and recycling facilities. Its twin-shaft design creates a powerful scrubbing effect on the material, breaking down even the most stubborn dirt and ensuring clean, ready-to-use material. The CONSTMACH pallet washer offers operators high flexibility with its adjustable shaft angle and speed control, enabling optimal washing performance for different types of aggregates. Its robust body, high-strength material usage, and easy maintenance ensure long-lasting operation. Furthermore, it can process hundreds of tons of material per hour without compromising cleaning quality, even in facilities requiring high capacity. This equipment improves the quality of aggregates used in construction projects, optimizes mineral separation processes in mining, and contributes to the production of reusable materials in recycling plants. Effective removal of foreign matter extends the life of subsequent crushing and screening equipment and reduces operating costs. Log Washer (Pallet Washer – Coarse Material Washer) Technical Specifications Machine Size: 2000 x 7000 mm (Double Shaft) Electric Motor Power: 2 x 37 kW, GAMAK Brand, IE3 Efficiency Class, 1500 rpm Feed Size: 0 - 50 mm Main Body Material: S235JR A1 Quality, 8 mm Rolled Sheet Rotation Speed: 15 - 25 rpm Helix: Double Shaft Spiral Pallets, S235JR, 8 mm Sheet, Cast Arms Resistant to Wear and Hardox Coating Shaft: Cr-Ni-Mo Alloy Steel Body: GS52 Steel Casting Duodpfx Aexp Urdjg Dop Bearings: SKF or FAG, Heavy Duty Roller Bearings Production Capacity: 200 - 400 t/h Weight: 24,000 kg Why Should You Choose CONSTMACH Log Washer (Pallet Washer – Coarse Material Washer)? CONSTMACH combines quality, durability, and efficiency with its log washer systems developed through years of experience. Each component is designed for long life and minimal maintenance. Thanks to its high-capacity washing performance, energy efficiency, and ease of use, you will get the most out of your investment in the shortest time possible. CONSTMACH also guarantees the uninterrupted operation of your business with its after-sales support and spare parts services. If you are looking for a reliable solution for clean, solid, and high-quality aggregates, the CONSTMACH pallet washer is the right choice. What Do We Do at Constmach? Constmach is a leading machine manufacturer offering a wide range of products tailored to the needs of the construction and mining industries. Our product portfolio includes concrete block making machines, stationary and mobile concrete plants, stone crushing machines, stone crushing and screening plants, sand washing machines, sand making machines, asphalt plants, conveyor belt systems, jaw crushers, and mobile crushing plants. With its high quality standards, innovative production approach, and customer-focused solutions, Constmach stands out as a reliable brand in both national and international markets. Our products continue to be the preferred choice of industry professionals due to their durability, efficiency, and long-lasting

Condition: used, mileage: 297,350 km, power: 375 kW (509.86 HP), first registration: 11/2020, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, brakes: retarder, color: silver, gearing type: automatic, emission class: euro6, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), parking heater, Palfinger Epsilon long timber crane type S260L97 with Palfinger FG57X log grapple. Floor and high-seat controls, load moment [kNm] 229, stowage above cab, * Fully serviced with maintenance record ---- ----* Volvo Dynamic Steering (VDS) * 12-speed automatic transmission * VEB+ (Volvo Engine Brake Plus) * Rear axle with air suspension * Anti-lock braking system (ABS) * Retarder * Electronic Stability Program (ESP) * Disc brakes * Smoke detector in cab * Lane departure warning with steering assistance (LSS-DWC) * L cab (long version) * External transparent sun visor * Electrically adjustable and heated exterior mirrors * Refrigerator in cab * Rain sensor * Electric windows for driver and passenger doors * Central locking with remote control * Immobilizer (transponder) * Engine-driven PTO * Two additional reverse crawler gears * Volvo I-Shift transmission * Automatic climate control * Auxiliary air heater * Driver's seat heating * Cab noise insulation * 6-cylinder engine * Telematics gateway with 4G * 285-liter fuel tank * 170-liter fuel tank Dujdpfx Agexl Iino Dop * 90-liter AdBlue tank * Beacon lights left and right * Euro 6 engine version * Cruise control * Double PTO * Trailer recognition with LED sensor * Air-suspended driver's seat * Lower bunk * Driver comfort package * EBS (Electronic Braking System) * No spare wheel ----Sale only to businesses! No guarantee for the information provided! Subject to prior sale! Only our general terms and conditions apply! We will be happy to provide you with a leasing or financing offer.

Condition: used, maximum load weight: 35,870 kg, overall weight: 42,000 kg, axle configuration: 3 axles, first registration: 10/2021, next inspection (TÜV): 03/2027, loading space length: 14,000 mm, Year of construction: 2021, Equipment: ABS, DOLL Type H3L ? 14XL 3-axle Timber Stake Semi-Trailer, extendable by 3.5 m to a maximum total length of 12,950 mm, platform in bolster design, 6x ExTe steel bolster bodies Type 144-S with Ecco-Steel square stakes, various lashing points on the frame, possible log transport lengths: 2x 6m, 2x 5m, 3x 4m, 3x 3m, and long logs up to 14m, SAF axles 3x 9,000 kg with air suspension, lift and lowering function, ABS, disc brakes with EBS, 1st axle liftable, last axle self-steering, WABCO brake system with WABCO 'SmartBoard' control unit for air suspension, load pressure gauge, odometer, etc., plastic tool box on the left rear side, LED rear lights and LED work lights, 385/65 R 22.5 tires // 6 units, technically permissible gross weight 42,000 kg, unladen weight 6,130 kg, one owner, good overall condition, German vehicle with German registration documents! Sale to trade only! All information subject to change! Errors and prior sale excepted! Dsdpfsyqcbqox Ag Doup

Condition: used, mileage: 966,895 km, power: 441 kW (599.59 HP), first registration: 03/2014, fuel type: diesel, overall weight: 27,000 kg, axle configuration: 3 axles, next inspection (TÜV): 03/2028, brakes: retarder, color: green, gearing type: mechanical, emission class: euro5, Year of construction: 2014, Equipment: ABS, air conditioning, crane, parking heater, Internal vehicle number: G300294 German vehicle Available immediately at our yard in Kaufungen – Kassel Dsdpfx Asyrzl Reg Doup For more information, please contact: * Luis Lucena (German, English, Spanish, French) * Viktoria Sologubova (Polish, Russian, Ukrainian, English) Financing example: * Internal number: G300294 * Purchase price: €39,900.00 * Down payment: 10% * Term: 60 months * Monthly rate: €620.02 * Final residual value: €7,380.00 If you are interested in this offer or would like to adjust it according to your requirements, please contact us (Mr. Enchev). We look forward to your call. Errors excepted. We are happy to accept your used vehicle in part exchange. Financing directly available at our company. GOLEC NUTZFAHRZEUGE GMBH We speak: German, English, Spanish, Polish, Ukrainian, Russian, Bulgarian.

Condition: used, mileage: 448,190 km, power: 552 kW (750.51 HP), first registration: 01/2022, fuel type: diesel, overall weight: 33,664 kg, axle configuration: > 3 axles, brakes: retarder, color: gold, gearing type: automatic, emission class: euro6, loading space length: 7,000 mm, Year of construction: 2022, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, parking heater, soot filter, Internal vehicle no.: VTC20016 Financing example: * Internal number: VTC * Purchase price: €105,900.00 * Down payment: 10% * Term: 60 months * Monthly instalment: €1,565.27 * Final residual value: €20,980.00 If you are interested in this offer or would like it adapted to your needs, please contact us (Mr. Enchev). We look forward to your call. Errors excepted. We are happy to accept your used vehicle as a trade-in. Financing is available directly in-house. GOLEC COMMERCIAL VEHICLES GMBH Dsdpfx Asxummqog Doup We speak: German, English, Spanish, Polish, Ukrainian, Russian, Bulgarian.

Condition: used, mileage: 192,829 km, power: 375 kW (509.86 HP), first registration: 06/2021, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, next inspection (TÜV): 08/2026, brakes: retarder, gearing type: automatic, emission class: euro6, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, parking heater, Tachograph 4.1 Crane: Cross lever control Hydrodrive front axle, rear axle steered and liftable, active roll stabilization, axle load scales for rear axle and trailer, parking brake on front axle, trailer data display, radio set, MAN telematics, main battery switch, 12/24V sockets, LGS IV, 1 fire extinguisher 2 kg, LED daytime running lights, snow chain holder, RIO Box, MAN radio media system with 7" color display and navigation SD covering all of Europe, hands-free kit for 2 mobile phones, AUX-in/USB, Alucar short timber superstructure with 4 Exte bolsters, 6850 mm loading length, Epsilon M12Z Classic control with cross lever, double extension with 9.10 m reach, wide outriggers RX 47 (4.70m), bio-oil, toolbox, snow chain holder, 4 x LED spotlights. Djdpeucizxofx Ag Deup

Condition: used, first registration: 06/2007, total length: 4,000 mm, total width: 25,500 mm, total height: 29,000 mm, suspension: steel, tire size: 315/80 R 22.5/5mm, wheelbase: 2,500 mm, front tire size: 315/80 R 22.5/5mm,

Condition: used, mileage: 847,500 km, power: 552 kW (750.51 HP), first registration: 12/2015, fuel type: diesel, axle configuration: 6x4, fuel: diesel, color: other, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, Year of construction: 2015, Equipment: crane, electric window regulation, fog lights, parking heater, power assisted steering, power mirror, spoiler, = Additional options and accessories = - Air horn - Air suspension - Alloy wheels - High Beams - Immobilizer Dujdpfx Agsx Ihmbs Dep - I shift - PTO - Radio CD player - Refridgerator - Roof Spoiler - Sleeping cabin - Speed limiter - Sper - Toolbox = Remarks = Volvo FH750, 29-12-2015, 847500 km, Euro 6, 6x4, I-Shift, Dynamic steering, Loglift loading crane (2007) = More information = Front axle: Steering Rear axle 1: Double wheels Rear axle 2: Double wheels GVW: 29.000 kg Crane: year of manufacture 2007 Extendable superstructure: Yes = Dealer information = Bank data: Rabobank Account: 39.33.10.655 IBAN: NL73RABO0393310655 Swift code: RABONL2U - Always check our bank details before transaction! - Reservation of vehicles is not possible without a deposit. - Writing and text errors are reserved for all vehicles offered.

Condition: used, empty load weight: 4,200 kg, maximum load weight: 13,800 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 11/2006, front tire size: 275/70R22,5, rear tire size: 275/70R22,5, Equipment: ABS, | Ressenig timber trailer | Year: 2006 | BPW axles with drum brakes | 2 pairs of stanchions | 275/70R22.5 twin tires | 50mm towing eye | Unladen weight: 5,300 kg | Payload: 13,800 kg | Gross weight: 18,000 kg | 6 meter timber | Austrian vehicle | Air suspension | Subject to errors, changes, and prior sale. Dodpfsrg H Ausx Ag Dsup

Condition: new, maximum load weight: 32,900 kg, overall weight: 40,000 kg, axle configuration: 3 axles, loading space length: 13,510 mm, loading space width: 2,450 mm, total width: 2,550 mm, Year of construction: 2026, Equipment: ABS, PAVIC OptiPa PRSH 27 platform semi-trailer for transporting wood and long material. * Chassis length approx. 13510 mm (head frame - head frame) * Chassis width approx. 2540 mm (outer frame - outer frame) * Driving height unloaded approx. 1400 mm with fifth wheel height 1200 mm * Maximum fifth wheel load approx. 16000 kg * Front overhang (kingpin to front edge of KoRa) 1550 mm * King pin 2" according to SAE standard, replaceable from below * E-bike holder for 1 E-bike Dujdpfx Agevw Hnwo Dsp * 16 stanchion pockets embedded in the outer frame * 8 pockets as storage for stanchions distributed centrally over the entire length * Front wall approx. 2500 mm high, angled corners with sheet metal cladding * Steel floor 4/6 mm tear plate cover * Outer frame with rounded edges and holes for load securing approx. every 500 mm * Axle lift first axle, automatic function, with traction aid * Axle distance approx. 1310/1310 mm * Branded tires 385/65 R 22.5 * EBS braking system with roll stability program * Smartboard/TIM/Infocenter, in addition to the H+S valve * LED lighting system * LED work lights * 2x plastic toolbox We are happy to provide you with further information

Condition: used, mileage: 499,000 km, power: 427 kW (580.56 HP), first registration: 03/2022, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, brakes: retarder, gearing type: automatic, Year of construction: 2022, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), navigation system, parking heater, soot filter, * MAN TGX 26.580 short timber transporter * First registration: 03-2022 * Automatic transmission * Retarder * Tajfun L 150 Z 96 * incl. grapple * Auxiliary heater Dodpfx Aeyq Ddyeg Doup * Air conditioning * More pictures and video via WhatsApp * Information subject to change and prior sale reserved.

Condition: excellent (used), functionality: fully functional, mileage: 328,824 km, power: 375 kW (509.86 HP), first registration: 05/2018, empty load weight: 14,800 kg, maximum load weight: 11,200 kg, overall weight: 26,000 kg, next inspection (TÜV): 07/2026, brakes: retarder, gearing type: automatic, suspension: steel-air, Equipment: ABS, air conditioning, crane, differential lock, lane keeping assist, navigation system, parking heater, retarder, seat heater, DAF XF 510/Long+Short Timber/6x4/Penz 30Lp+8.20/Combi-train • Manufacturer: DAF • Model: XF 510 • Mileage: 328,824 km • First registration: 05/2018 • Power: 375 kW / 509 hp • Axle configuration: 6x4 • Transmission: Automatic • Suspension: Leaf/Air • Long-haul driver's cab Duedpfeyizrxox Ag Dsp • Air conditioning • Navigation system • ABS • EBS • Retarder/Intarder • Cruise control • Auxiliary heating • Heated seats • Differential lock • GPS • EPS • Euro 6 • MOT (TÜV): July 2026 • Unladen weight: 14,800 kg • Payload: 11,200 kg • Perm. gross vehicle weight: 26,000 kg • German vehicle • German documents • Immediately operational Crane • Manufacturer: Penz • Model: 30 Lp+8.20 • Lifting capacity: 7,255 kg at 4 meters; 4,832 kg at 6 meters; 3,575 kg at 8 meters • Grapple: MHS MG50 Trailer • Huttner LNZK-20 • Adjustable stakes • Leaf/Leaf suspension • Steering axle with remote control • Unladen weight: 5,850 kg • Payload: 26,150 kg • Perm. gross weight: 32,000 kg This offer is non-binding and subject to prior sale. Errors and/or typographical mistakes excepted. Sale subject to our general terms and conditions.

Condition: excellent (used), functionality: fully functional, empty load weight: 4,820 kg, maximum load weight: 34,180 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 04/2017, loading space length: 1,310 mm, loading space width: 2,270 mm, loading space height: 2,400 mm, Pavic HTS 24/12x Stakes/Lift • Manufacturer: Pavic • Type: HTS 24 • First Registration: 04.2017 • Full air suspension • All brakes are disc brakes • 1st axle lift • Dimensions: L 13.10 m x W 2.27 m x H 2.40 m • Unladen weight: 4,820 kg • Payload: 34,180 kg • Permissible total weight: 39,000 kg • German vehicle • German documents • Immediately ready for use • This offer is non-binding and subject to change. - Subject to prior sale, - Errors and/or typographical mistakes excepted. Dujdsyiuypopfx Ag Dsp - Sale in accordance with our terms and conditions.

Condition: good (used), Year of construction: 2017, operating hours: 12,979 h, functionality: fully functional, machine/vehicle number: 002, arm reach: 11,000 mm, throat depth: 11,000 mm, total width: 3,000 mm, Equipment: cabin, Ideal machine for timber handling, vehicle has been regularly serviced, and was in daily operation until recently - Cummins engine, 118 kW - All-wheel drive and heavy-duty ZF axles - Special timber handling equipment: 11.0 m reach, 6.3 m boom, 4.6 m curved stick Dsdpfsyric Dex Ag Dsup - Load stabilizer to dampen load oscillations during travel - Width: 3.00 m, operating weight: 27 tons - MaxCab comfort cab raised by 1 m, with air conditioning, joystick steering, sliding door, heated seat, air-suspended comfort seat, full protective grid - Hydraulic system with load-sensing technology, stick damping - Camera systems on right side and rear - Idle speed automation and ECO mode - Automatic oscillating axle lock - Automatic travel direction change via range sensor - Handrail on upper structure, removable - Bumper guard on and underneath the undercarriage - Sennebogen control and diagnostics system (SENCON) - Reversible fan for radiator cleaning - 7 x LED work lights (boom, stick, cab, superstructure) - MISERA timber grab ML 92 (0.92 sqm) with Indexator rotator head

Condition: used, mileage: 246,523 km, power: 368 kW (500.34 HP), first registration: 08/2017, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, brakes: retarder, color: blue, gearing type: automatic, emission class: euro6, loading space length: 5,300 mm, loading space width: 2,540 mm, Equipment: ABS, air conditioning, all wheel drive, crane, electronic stability program (ESP), navigation system, soot filter, MAN 28.500 TGS timber transporter with Epsilon timber crane 6x4-4 all-wheel drive Suspension: leaf-air Wheelbase: 3.90 m Palfinger EPSILON Type: M120Z96 2x hydraulic extensions 2x hydraulic support legs 1x grapple Equipment: - Digital tachograph - Seat heating - Lift and steering axle - Radio-media-AUX-Bluetooth - Electric windows - Sunroof - Sun visor - M.F.H. Djdpfx Aevklm Ejg Djup - Trailer coupling (2x air, ABS, electrical connection) We are also happy to assist you with financing/leasing through our partners. All information without guarantee. Subject to errors and prior sale.

Condition: used, maximum load weight: 14,225 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 01/2019, loading space length: 6,611 mm, loading space height: 4,000 mm, total width: 8,511 mm, total height: 2,550 mm, Equipment: ABS, DOLL - 2-axle short timber trailer in "stool design" type A2G-10L500 (A131) Technical data: Dimensions: Total trailer length: 8,511 mm (with drawbar length 1,900 mm) Loading length: 6,611 mm Front overhang: 760 mm Rear overhang: 856 mm Vehicle width: 2,550 mm Wheelbase: 4,995 mm Load height top edge of frame loaded: 1,187 mm (with 275/70 R 22.5 tires) Overall height: max. 4,000 mm Duedpfxeymgn Tj Ag Djp Weights: Perm. total weight: 18,000 kg Axle load (2 x 9t): 18,000 kg (techn. 24,000 kg) Unladen weight approx.: 3,350 kg (without stools and stanchions) Payload approx.: 14,650 kg Basic equipment:A2G DOLL - 2-axle short timber trailer in "stool design" - straight top chord Sturdy welded construction consisting of 2 longitudinal beams with straight upper chord. - Bogie with ball bearing rim - 1 wheel chock with bracket - Side underrun protection in accordance with ECE?R 737254461 Rear underrun protection: Aluminum underride guard, in accordance with ECE?R 58 Complete lighting and license plate holder installed in a protected manner, in accordance with ECE?R 487227407 Wheel cover: Complete plastic mudguards over the wheels, attached to the bogie at the front and to the main frame at the rear, with DOLL mud flaps behind the axles. Frame cover: Full-length aluminum duet plate cover (3/5 mm) bolted between the upper chords.7206867 Drawbar GZY27: Drawbar fork with silent bushing bearings and drawbar support, type GZY 27drawbar eye: Length: D-value: Maximum front axle load: Maximum total weight:Ø 50 mm (heavy-duty ECE) 1,900 mm 125 kN 10 t 27 t Connecting cable to the truck: routed along the drawbar (air, light, ABS). Cable routing: Brake and electrical cables routed protected on the main frame. Grapple bracket: Angled grapple bracket at the front, reinforced. Mud flap: Continuous mud flap at the end of the vehicle, swinging, with ?DOLL? log Chassis / Chassis:12 t Chassis: 2 single axles, BPW, 12 t with drum brakes, both axles with ABS and AGS, including safety ropes. Suspension type SL, with 2 x 43 mm trailing arms. Air suspension: Air suspension without lifting and lowering. Weight display without Smartboard: EBS-E weight display for trailers with air suspension, consisting of 2 pressure sensors to determine the axle loads. The axle loads are transmitted to the truck via CAN-BUS for weight display in the truck display. (Truck equipment not included in the scope of delivery!) Brake system: Electronically controlled 2-line air brake system (EBS-E). Brand name, load-dependent, including ABS. EBS system completely installed, spring-loaded parking brake, can be operated via parking release safety valve, as well as from the cab (truck-side installation not included in scope of delivery!) Aluminum air tank Brake connection: 1 duomatic clutch head. Tires: Tires (85.50 kg / piece): 8 pieces tires 275/70 R 22.5 make Continental Hybrid HS3 on steel rim 8.25 x 22.5. Stools / stanchions: Stool: 6 pieces ECCO? steel stool body with 2° stanchion inclination type Kombi 7 (80.0 kg), with bracket ? Clamp fastening on the main frame including 1 pair of hooks for load securing. Stanchions: ECCO aluminum stanchions type ALU 7, screwable, fixed dimension stanchions. Basic height 2,550 mm (21.0 kg). Maximum loading capacity per pair of stanchions 7t. Electrical equipment / lighting: Lighting system: Conventional wiring of the trailer to increase the quality standard. ? Long service life ? Insensitive to moisture and dirt ? Minimal maintenance ? Quick and easy repair in rare serv

Condition: excellent (used), operating hours: 20 h, CATALOG NUMBER 7874 – Manufactured in Poland - Excellent condition – only 20 operating hours – Original documentation DTR + CE Dedpfx Ajyab Rvog Dsup – Additional knives included – Additional bushings included: 18mm, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29mm - Knife setting tool included - Used machine, original paint (not repainted) Technical specifications: - Diameter of produced dowels: 180–300mm - Max. diameter of raw wood before processing: 380mm - Max. allowance for machining: 40mm per side - Min. input material length: 1100mm - Knife head drive motor: 55kW - Stepless feed speed adjustment + forward/reverse: 1.5–8 m/min - Feed motor: 7.5kW Configuration: - 8 toothed infeed driven rollers - 4-knife cutter head - 6 smooth outfeed driven rollers - 7 pneumatic hold-downs - Additional bushings included - Additional knives included - Operating pressure: 6 bar - Electric cabinet dimensions (LxWxH): 900x400x1600mm - Machine dimensions (LxWxH): 4100x1650x2300mm - Weight: ~4000kg Net price: 199,900 PLN Net price: 47,600 EUR (depending on exchange rate of 4.2 EUR) (Prices may vary depending on exchange rate fluctuations)

Condition: new, functionality: fully functional, Cone splitter Excavator splitter Drill cone splitter Wood splitter KS4 Drill cone 200x400 - Made in Germany The powerful cone splitter for attachment to mini-excavators, excavators, wheel loaders, tractors, skidders and many other options. The drill cone can be exchanged for various tools such as a root cutter, auger, hummus sieve, concrete mixing drum, weed broom and many other attachments. The cone splitter consists of a very sturdy drive unit and the drill cone (splitting cone) The drill cone is completely hardened. It is not made of unhardened steel as is the case with many other manufacturers. It can be converted to other tools in just a few simple steps. - Cone splitter - Root cutter - Earth auger - Weed brush - Sweeping broom - Rotary harrows NO CHINA GOODS ! WE PRODUCE IN GERMANY ! THE ideal multi-purpose tool for foresters, farmers, gardeners, do-it-yourselfers and professionals Overall length 600 mm plus attachment and interchangeable system Universally applicable in construction, forestry, agriculture and horticulture For splitting heavy firewood or wood for wood chips For drilling holes in the ground, for stakes, plants and much more For removing rootstocks and tree stumps For cleaning trenches and paved areas For levelling garden areas and creating a fine soil structure You simply do the work from the excavator without any further assistance. A very solid and stable steel construction enables you to work hard and for a long time. In addition to the motor, the shaft is supported by 2 sturdy tapered roller bearings to protect against tension and pressure. The tapered roller bearings can be lubricated for a long service life. A powerful HMT 400 hydraulic motor with up to 1,600 Nm gives you the necessary torque for efficient work, from 25 l/min up to 125 l/min and 210 bar pressure Weight 70 kg included: - Drive unit with powerful HMT hydraulic motor, weight 70 kg - Drill cone with tip Ø 200 mm 270 mm/400 mm long, 6xM16 thread LK173 on the front side Total length 270 mm + drill cone tip 130 mm = 400 mm Dsdpfx Asupiapsg Dsup Diameter 200 mm Weight 30 kg Total weight 100 kg

Condition: new, functionality: fully functional, Year of construction: 2024, overall weight: 100 kg, total height: 1,000 mm, color: red, continuous operating pressure: 210 bar, spindle torque (max.): 1,800 Nm, Equipment: hydraulics, Cone splitter Excavator splitter Drill cone splitter Wood splitter KS5 Drill cone 200x400 - Made in Germany The powerful cone splitter for attachment to mini-excavators, excavators, wheel loaders, tractors, skidders and many other options. The drill cone can be exchanged for various tools such as a root cutter, auger, hummus sieve, concrete mixing drum, weed broom and many other attachments. The cone splitter consists of a very stable drive unit and the drill cone (splitting cone) The drill cone is completely hardened. It is not made of unhardened steel as is the case with many other manufacturers. It can be converted to other tools in a few simple steps. - Cone splitter - Root cutter - Earth auger - Weed brush Dsdeuph Uxspfx Ag Dsup - Sweeping broom - Rotary harrows NO CHINA GOODS ! WE PRODUCE IN GERMANY ! THE ideal multi-purpose tool for foresters, farmers, gardeners, do-it-yourselfers and professionals Overall length 600 mm plus attachment and interchangeable system Universally applicable in construction, forestry, agriculture and horticulture For splitting heavy firewood or wood for wood chips For drilling holes in the ground, for stakes, plants and much more For removing rootstocks and tree stumps For cleaning trenches and paved areas For levelling garden areas and creating a fine soil structure You simply do the work from the excavator without any further assistance. A very solid and stable steel construction enables you to work hard and for a long time. In addition to the motor, the shaft is supported by 2 sturdy tapered roller bearings to protect against tension and pressure. The tapered roller bearings can be lubricated for a long service life. A powerful HMT 500 hydraulic motor with up to 1,800 Nm gives you the necessary torque for efficient work, from 25 l/min up to 125 l/min and 210 bar pressure Weight 70 kg included: - Drive unit with powerful HMT hydraulic motor, weight 70 kg - Drill cone with tip Ø 200 mm 270 mm/400 mm long, 6xM16 thread LK173 on the front side Total length 270 mm + drill cone tip 130 mm = 400 mm Diameter 200 mm Weight 30 kg Total weight 100 kg

Condition: used, mileage: 827,000 km, power: 478 kW (649.90 HP), first registration: 11/2017, fuel type: diesel, axle configuration: 8x4, fuel: diesel, color: red, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, Year of construction: 2017, Equipment: crane, differential lock, electric window regulation, fog lights, parking heater, power assisted steering, power mirror, = Additional options and accessories = - Flashing light - High Beams - Hub Reduction - Immobilizer - I shift - Lift Axle - PTO - Radio - Sleeping cabin - Speed limiter - Sper - Toolbox = Remarks = Crane Number of hydraulic extensions: 2 Rotator: ✓ Squeeze Box: ✓ Volvo FH 650, 2017, 827000 km, Euro 6, 8x4 with Hub Reduction, Kesla 2112 T Loading crane, 2x Hydraulic extendable, Djdsyifb Ujpfx Ag Deup Wooden stakes are easy to remove for a flat loading floor, Loading crane with quick coupler can be dismantled = More information = Front axle 1: Steering Front axle 2: Double wheels; Differential lock; Reduction: hub reduction Rear axle 1: Double wheels; Differential lock; Reduction: hub reduction Rear axle 2: Lift axle; Steering Number of cylinders: 6 Crane: Kesla 2112 T, year of manufacture 2017, on rear of chassis = Dealer information = Bank data: Rabobank Account: 39.33.10.655 IBAN: NL73RABO0393310655 Swift code: RABONL2U - Always check our bank details before transaction! - Reservation of vehicles is not possible without a deposit. - Writing and text errors are reserved for all vehicles offered.

Condition: used, mileage: 694,500 km, power: 368 kW (500.34 HP), first registration: 09/2018, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, next inspection (TÜV): 03/2026, brakes: retarder, color: brown, gearing type: automatic, emission class: euro6, total width: 2,550 mm, total height: 4,000 mm, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), parking heater, soot filter, Leaf-air suspension, outside temperature display, brake assist, differential lock, air brake, disc brake, sun visor, air-suspended seat, adaptive cruise control, heated exterior mirrors, electric exterior mirrors, CB radio, distance warning system, tachograph, lift axle, power take-off, underrun protection, twin tires, air brake system, steering axle, used vehicle. Vehicle no. 3299, ESP, driver comfort seat with ventilation/heating, leaf spring front axle, air suspension rear axle, NLA lift axle + steering axle, tires: front axle 385/65 R22.5, rear axle: 315/80 R22.5, NLA: 385/55 R22.5, aluminum rims, trailer hitch with air and electrical connections, ZF automatic transmission, retarder/intarder, PTO/hydraulics, TGS driver's cab with 1 bed, cool box, automatic climate control, auxiliary heater, sound system, RIO-Box, ACC, lane departure warning system, EURO 6, 4 pairs of stanchions, Epsilon timber crane M12Z, 2x hydraulic extension, rotator, timber grab, ENGINE OVERHAULED, NEW CLUTCH! Curb weight: 14,360 kg, gross weight: 26,000 kg, first owner. Please inquire for offers. Subject to errors and prior sale. Dujdpsyn Uqxsfx Ag Dep