Used Weima Wood Shredder for sale (93)

Condition: used, Year of construction: 2025, Special price - exhibition machine Technical specification WL 4 Hopper opening with log spacer 600 x 1,050 mm Hopper content 0.6 m³ Working width of the rotor 600 mm Diameter of the rotor 252 mm Drive power 18.5 kW Rotor speed 80 -120 rpm Number of knives 28 Type and size of knives concave / 40 x 40 mm, cutting reversible crowns Screen perforation 15-20 mm Painting WEIMA Standard RAL 2002 / 7016 Connected load 400 V +/- 5% / 50 Hz Weight approx. 1,300 kg Including: • Control cabinet* (Rittal) including electrical control (Moeller / Siemens) and star-delta start-up • Rubber vibration elements • V - rotor (patented) with knife pockets milled into the profile • Gear limit switch • Slider cycle • Slider half back • Log spacer hopper • 2. Knife series Hedpfx Agjx Twd Ts Ujfb Storage location: Supplier

Condition: new, Year of construction: 2026, Super special price, as it was on display at our in-house exhibition. Operating hours: 2 Available immediately - subject to prior sale If gone - then gone Compact design, high reliability and an excellent price-performance ratio excellent price-performance ratio: these are the advantages of this machine, which is perfect for briquetting materials such as wood such as wood, polystyrene, foam or paper. Special feature: the screw pre-compaction, which guarantees a guarantees high briquette quality. For quick and easy installation, the C 140 is mounted on a stable base frame. mounted on a stable base frame Overall dimensions: 1900 x 1410 mm Hopper opening: 1044 x 1044 mm Hopper height: 1010 mm Hopper capacity: 1.1 m³ Drive power: 4 kW Briquette diameter (mm) 40 Throughput capacity (kg/h) 30-40 Hydraulic oil volume (l) 100 Weight (kg) 530 Equipment: Press Powerful pressing mechanism with low-wear, chrome-plated tongs Pre-compressor with end-sensitive cylinder and screwed cover Control box with PLC control Hjdpfx Agjlht H Ej Usfb Hydraulics Separate oil tank with pump motor and valve control Safety switch for oil temperature Container with agitator and gear motor Screw channel with discharge screw and gear motor gear motor Accessories: Briquette length monitoring Automatic on - off Location: 54634 Bitburg

Condition: used, Year of construction: 1998, Slow-speed model: with hydraulic moving floor Filling opening (mm): 1200 x 1200 Hopper volume: 2 cubic meters Throughput depending on material: 2 - 4 hopper fills per hour Motor (kW): 37 Profile rotor: 8 x rotating knives (reversible breaker plates) Hfjdpfox Srq Ssx Ag Ueb Knives: easily and quickly reversible/replacable by screws Knife shaft diameter / rotor diameter (mm): 368 Rotor length (mm): 1200 Rotor speed (rpm): 90 Knives: 64 Extraction port diameter (mm): 200 Air speed at suction port (m/sec): 28 Chipper weight (kg): 3300 Chipper length (mm): 2500 Chipper width (mm): 1900 Chipper height (mm): 1750

Condition: excellent (used), Year of construction: 2017, Very well-preserved chipper with only 931 operating hours 600 mm rotor width Hjdpfxjx N S I Es Ag Ujfb with double knife row, 30 knives 18.5 kW motor

Condition: used, Year of construction: 1998, Briquette press Weima TH 400 Year of construction 1998 Briquette diameter 50mm Capacity 60-80kg/h Machine no. 950-756 Main motor 7.5kW 200 Bar, 400V Hedpewh I Ursfx Ag Uefb Including large collection container Machine is currently not working, the hydraulic block is leaking. - Year: 1998 - Documentation available: No - CE certificate present: No Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: good (used), Year of construction: 2004, functionality: fully functional, Briquetting press for wood or wood-like materials Throughput: up to a maximum of 100 kg/h Briquette: 60 mm cylindrical Motor: 7.5 kW Dimensions: approx. 2150 x 1700 x 1400 mm Container size: 1400 x 1400 x 920 mm Optional: Extraction system available as a hopper attachment. Requirements: Input material should ideally be shorter than 25 mm chip length Moisture content: 6-12% (oven-dry basis) Machine suitable for intermittent operation. For example, up to 2.5 hours briquetting; 1 hour pause, etc. If the machine is to operate continuously for longer than 2.5 hours at a time, an optional cooling system must be connected. Hfsdew Hpizopfx Ag Uob

Condition: used, Year of construction: 2025, Special Price - Showroom Machine Garbsen Our Machine Concept WL 6 The Weima High-Performance - Shredders with their flexible application possibilities can process all types of wood-based materials (hardwood, softwood, chipboard, MDF materials, plywood, veneer scraps, etc.) into fuel chips, achieving enormous volume reduction of material for bulky items. Functionality: The machine is equipped with a large feed hopper and can be fed with a conveyor belt or by hand. This hopper can be adapted to individual needs and guarantees continuous and cost-effective material feeding without the need for manual assistance. The hydraulically controlled pusher supplies the wood waste to be shredded to the cutting area of the rotor and is automatically and load-dependently controlled. The internal pusher guides are made of highly abrasion-resistant plastic (polyamide) and can be adjusted. The hydraulic cylinders are suspended in a cardanic way to avoid lateral forces on the piston seals. The patented and profiled V-rotor made of solid steel has a diameter of 252 mm and operates with a rotor speed of 80 - 120 rpm. The concavely ground, aggressive, and 4-times reversible knives / cutting crowns are located in milled knife pockets on special knife holders; this patented system guarantees high throughput performance, low energy consumption, and optimum discharge of shredded material by reducing the cutting gap between counter knife and rotor for the first time. The screen located under the rotor determines chip size (10 - 100 mm ). A hydraulically opening screen basket is available upon request. Power transmission from the electric motors is via V-belts to a heavy-duty gearbox mounted on one end of the rotor shaft. Precise cut at high throughput with profiled V-rotor The specially developed by WEIMA V-rotor can be used universally and is made from solid material. Its aggressive material intake with up to two rows of knives guarantees high throughput with low power requirements. It can be equipped with hardened steel cutting knives with edge lengths of 30 mm and 40 mm. These can be turned several times in case of wear, which drastically reduces maintenance costs. Intuitive operation via Siemens PLC control with touch display To ensure that the electronics are optimally matched to the machine, we design, build, and wire our control cabinets ourselves. We use only high-quality components – for example from Siemens or Rittal. Intuitively operated touch surfaces guarantee quick adjustments. Functions such as setting the pusher stroke or stop ensure high throughput. The built-in overload protection also prevents defects on the machine. Technical Specification WL 6Feed opening 800 x 1,250 mmHopper capacity 0.9 m³Rotor length 800 mmRotor diameter 256 mmDrive power 22 kWRotor speed 90 rpmMax. number of knives 42 piecesKnife type and size concave / 40 x 40 mm, cutting crownsScreen perforation 10-60 mmPaint finish WEIMA Standard RAL 2022 / 7016Connection value 400 V +/- 5% / 50 HzWeight approx. 1,600 kgIncluding: - Control cabinet* (Rittal) incl. electrical control (Moeller/Siemens) and S Hedpfx Agex Twdme Usfb

Year of construction: 2012, condition: excellent (used), Weima sieve for 4 wave chopper ZM 30 Sieve size: : 20/25 mm Hfodpfx Agshh Dpkj Uob Location: Ex stock 54634 Bitburg - immediately available -

Condition: excellent (used), Catalogue number 7293 TECHNICAL DATA - Loading hopper dimensions (top, LxW): 1200x1520mm - Loading hopper dimensions (bottom, LxW): 1000x1520mm - Outlet for shredded wood + auger - Rotor working width: 1500mm Hedpfx Ajx Sq Rwjg Usfb - Main motor: 45kW - Pump motor: approx. 1.5kW - Number of knives: 41 pcs - Knife size: 40x40mm - Screen: 15mm x 20mm - Pusher drawer - Electric auto-reverse - Dimensions (LxWxH): 2450x2460x1720mm - Weight: approx. 3000kg ADVANTAGES – German-made – Very good condition – Used shredder Original photos Net price: 155,900 PLN Net price: 37,120 EUR depending on the 4.2 EUR exchange rate (Prices may change with higher fluctuations)

Condition: like new (used), engine power 18.5 kW hydraulic pressure drawer 15 mm screen year of manufacture 1994 Hsdpfxjx Uqube Ag Uefb

Condition: excellent (used), Year of construction: 1993, WEIMA WL 6 A wood chipper Crusher by the German company WEIMA - after the technical review - very good condition - year of production 1993 - documentation TECHNICAL PARAMETERS: hopper dimensions 800 x 1000 mm rotor diameter 175 mm Hjdpjgxuvtsfx Ag Uofb rotor length 800 mm 18.5 kW main engine number of knives: 18 pieces rotatable cutting knives 30 mm x 30 mm HYDRAULIC DRAWER CHIPPER EQUIPPED BY AUTOREWERS V-rotor 12 mm and 10 mm sieve rotor speed 90 rpm spigot diameter 200 mm height of the pressure drawer 175 mm dimensions (length / width / height) 230 x 140 x 160 cm weight 1400 kg

Condition: used, 0 800x600 mm Motor output 18,5 kW 0 0,6 m³ Diameter of the motor 252 mm Number of working hours 1741 h Dimensions (L/W/H) 1650x1200x1595 mm loading dimensions L x W x H 1650x1200x1800 mm Weight 1300 kg WEIMA shredder WL 4, machine completely checked ----- Note: The machine has been completely checked by us, it is running perfectly, see video. The blade and slide plate have already been replaced by the previous owner. We replaced the V-belt during the inspection. Description: The Weima high-performance shredders with their flexible application options Hsdpfx Asvvx Dzsg Ujfb can process all types of wood materials (hardwood, softwood, chipboard, MDF materials, plywood, veneer residues, etc.) into fuel chips and achieve an enormous reduction in the volume of the material in the case of bulky materials. Function: The machine is equipped with a large filling hopper and can be fed using a conveyor belt or by hand. This hopper can be adapted to individual needs and guarantees a continuous and cost-effective material feed without the need for manual assistance. The hydraulically controlled slider feeds the wood waste to be shredded to the cutting area of ??the rotor and is controlled automatically and depending on the load. The internal slider guides are made of highly abrasion-resistant plastic (polyamide) and can be adjusted. The hydraulic cylinders are cardanically suspended to avoid transverse forces on the piston sleeves. The patented and profiled V-rotor made of solid steel has a diameter of 252 mm and works at a rotor speed of 80 - 120 rpm. The concavely ground, aggressive and 4- way rotating knives / cutting crowns are located in milled knife pockets on special knife carriers. This patented system guarantees high throughput, low energy consumption and optimal discharge of the shredded material by reducing the cutting gap between the counter knife and the rotor for the first time. The screen mounted under the rotor determines the chip size (10 - 100 mm). A hydraulically opened screen basket is also available on request. The power is transmitted from the electric motors via V-belts to a strongly dimensioned gear, which is mounted on one side of the rotor on the shaft stub. Technical data WL 4 / 18.5 kW ----- Feed opening: 600 x 800 mm Standard hopper capacity: 0.6 m³ Rotor working width: 600 mm Rotor diameter: 252 mm Power: 18.5 kW Rotor speed: approx. 90 rpm Sieve diameter: 15 mm Paint finish: Weima standard RAL 2002 / 7016 Connection value: 400 V +/- 5% / 50 Hz Weight: approx. 1,300 kg Includes: Electrical control (Moeller / Siemens / Allen-Bradley) Control cabinet (Rittal / Sarell) Concavely ground cutting crowns (40 x 40 mm ) Sterntriangular start Vibration-damping foundation V-rotor (patented) with knife pockets milled into the profile (technical information according to the manufacturer - no guarantee!)

Condition: used, Year of construction: 2009, Briquetting press with hopper Motor 7.5 kW Briquette diameter: 50 mm Throughput capacity: 80 - 100 kg/h Weight: approx. 870 kg Oil capacity: 100 L With oil heating, agitator, and screw discharge With fill level sensor With automatic start Container size: 1500 x 1500 x 900 mm Overall dimensions: 2300 x 1800 x 1200 mm Operating hours: 3370 h Storage location: Nattheim Hsdpfx Agjx Twb Se Uefb

Condition: like new (used), Year of construction: 2026, operating hours: 1 h, Super special price, as it was on display at our in-house exhibition. Operating hours: 1 Available immediately - subject to prior sale If gone - then gone Compact design, high reliability and an excellent price-performance ratio excellent price-performance ratio: these are the advantages of this machine, which is perfect for briquetting materials such as wood such as wood, polystyrene, foam or paper. Special feature: the screw pre-compaction, which guarantees a guarantees high briquette quality. For quick and easy installation, the C 140 is mounted on a stable base frame. mounted on a stable base frame Overall dimensions: 1900 x 1410 mm Hopper opening: 1044 x 1044 mm Hopper height: 1010 mm Hopper capacity: 1.1 m³ Drive power: 4 kW Briquette diameter (mm) 40 Throughput capacity (kg/h) 30-40 Hydraulic oil volume (l) 100 Weight (kg) 530 Equipment: Press Powerful pressing mechanism with low-wear, chrome-plated tongs Pre-compressor with end-sensitive cylinder and screwed cover Control box with PLC control Hodotnz Ttspfx Ag Usfb Hydraulics Separate oil tank with pump motor and valve control Safety switch for oil temperature Container with agitator and gear motor Screw channel with discharge screw and gear motor gear motor Accessories: Briquette length monitoring Automatic on - off Location: 54634 Bitburg

Condition: excellent (used), CATALOGUE NUMBER 6907 TECHNICAL DATA - Loading hopper inlet at the top: 1980x1050mm - Loading hopper inlet at the bottom: 980x1050mm - Discharge for shredded wood: diameter 210mm - Rotor working width: 980mm - Main motor: 30kW - Pump motor: 1.1kW - Number of knives: 36 pcs - Knife size: 40x40mm - Screen: 18mm - Pusher drawer - Electric auto-reverse - Dimensions (L/W/H): 2100x2030x2070mm - Weight: approx. 3500kg – French-made – Similar to WEIMA WL 10 – New knives installed – Auto-reverse – Pusher drawer – Very good condition – Used shredder Net price: 88,900 PLN Net price: 2,160 EUR Net price calculated at exchange rate of 4.2 PLN/EUR Hsdpfx Agsx Rqx Sj Ujfb (in case of major rate fluctuations, price may change)

Condition: used, Year of construction: 2014, functionality: fully functional, machine/vehicle number: 990-185, overall weight: 4,500 kg, input current: 80 A, input frequency: 50 Hz, input voltage: 400 V, oil tank capacity: 1,000 l, noise level: 83 dB, Equipment: cooling unit, emergency stop, The WEIMA TH1500 briquetting press compacts all materials suitable for pressing within a single die. The resulting briquette is dimensionally stable and alternately ejected, ensuring smooth and continuous operation. The axial piston hydraulic pump, powered by a 30 kW motor, produces up to 7 briquette cubes per minute. A distinctive feature of this model is the precision die where the pressing process takes place. The movement sequences of the cylinders and the die are monitored and controlled by a displacement measurement system, ensuring high accuracy, repeatability, and consistent briquette quality. Technical Data: Hydraulic system motor power: 30 kW Operating voltage: 400 V / 50 Hz Nominal current: 80 A Protection fuse: 125 A Current drawn by hydraulic system: 55 A Machine weight: 4500 kg Oil tank capacity: 1000 l Hedpfxoxtm Ile Ag Uefb Output: approx. 7 briquette cubes/min Other available machines: Serial no. 990-184 – Year 2014

Condition: used, Year of construction: 2018, Single Shaft Shredder Weima Model: WLK2000 Main Motor: 110kW Rotor Diameter: 370mm Rotor Length: 2000mm Weight approx.: 9000kg Hsdpfx Aex A Unlsg Ujfb Rotor knives size: 40x40x23mm

Condition: new, Year of construction: 2026, your benefits Sturdy press mechanism with low-wear, chrome-plated tongs Pressing chamber wear bush Pre-compressor with end-position-sensed cylinder and screwed cover Control box with SPS-control Screw channel with discharge screw Separate oil tank with pump motor and valve control Hfodpfxecnz U Ee Ag Ueb Safety switch for oil temperature Mounting on stable base frame with rubber feet Briquette quantity monitoring Robust construction, low-maintenance technology, little space requirement: The machines of the C-series are particularly suitable for small and medium-size enterprises, whose required throughput does not exceed 50-80 kg/h or 200 to 400 kg/day. Practically any suitable material can be briquetted, e.g. wood, polystyrene, foam, paper or biomass. All machines are available as left- or right-hand version. The mounting on a stable base frame ensures a quick installation and makes mobile use possible. Briquette diameter (mm) 50 Throughput capacity up to (kg/h) 50 (depending on material) Hydraulic motor (kW) 5,5o Screw motor (kW) 0,55 Oil quantity (litres) 100 Weight (kg approx.) 800 Outstanding features at a glance Hydraulics with separate oil tank: temperature-controlled hydraulic unit, complete valve control, pump motor for long running times Briquette length monitoring: regulates the length of the briquette to a constant level Pressing area wear bush: Prevents wear in the pressing area Location: Ex works - free loading

Condition: used, Year of construction: 2018, Single Shaft Shredder Weima Model: WLK2000 Main Motor: 110kW Rotor Diameter: 370mm Rotor Length: 2000mm Weight approx.: 9000kg Rotor knives size: 40x40x23mm Hfodpfx Agox A Ul Ds Ueb

Condition: new, Year of construction: 2026, Weima Briquetting Press TH 714 The TH 714 machines are designed for plants with required throughput rates of up to 150 kg/h. The stable press housing enables the production of high-strength briquettes - from materials such as wood, polystyrene, foams, light metals, paper or biomass. Numerous additional options can be implemented, e.g. oil cooling for multi-shift operation. All machines are available as left- or right-hand version. Mounting on a stable base frame ensures fast installation and makes mobile use possible. User-friendly operation thanks to Siemens PLC control In order to live up to our performance promise, we design and produce all control cabinets ourselves at our Ilsfeld site and equip them with well-known international components. This guarantees highest quality with compact design. The used PLC-control from Siemens is perfectly adapted to the requirements of the briquetting process. Impurity-resistant screw conveyor due to cardanic suspension The screw conveyor, which transports the material into the pre-compressor of the briquetting press, is suspended on a cardan joint. This prevents interfering materials from causing damage to the screw conveyor. As is so often the case, however, it always depends on the specific application which suspension is chosen. For metal applications, for example, we often recommend rigidly mounted screws. Hfjdsil Hggspfx Ag Ujb Briquette diameter (mm): 70 Throughput capacity up to (kg/h): 150*1 Hydraulic motor (kW): 11 Oil quantity (liters): 250 Weight (approx. kg): 1100 Location: Ex stock 54634 Bitburg - immediately available - subject to prior sale

Condition: used, Year of construction: 2018, Single Shaft Shredder Weima Model: WLK2000 Main Motor: 110kW Rotor Diameter: 370mm Rotor Length: 2000mm Hfedpfx Agex A Uk Hs Ujb Weight approx.: 9000kg Rotor knives size: 40x40x23mm

Condition: like new (used), Year of construction: 2026, operating hours: 1 h, Super special price, as it was on display at our in-house exhibition. Operating hours: 2 Available immediately - subject to prior sale If gone - then gone Hfjdpetnz Hbefx Ag Ujb Compact design, high reliability and an excellent price-performance ratio excellent price-performance ratio: these are the advantages of this machine, which is perfect for briquetting materials such as wood such as wood, polystyrene, foam or paper. Special feature: the screw pre-compaction, which guarantees a guarantees high briquette quality. For quick and easy installation, the C 140 is mounted on a stable base frame. mounted on a stable base frame Overall dimensions: 1900 x 1410 mm Hopper opening: 1044 x 1044 mm Hopper height: 1010 mm Hopper capacity: 1.1 m³ Drive power: 4 kW Briquette diameter (mm) 40 Throughput capacity (kg/h) 30-40 Hydraulic oil volume (l) 100 Weight (kg) 530 Equipment: Press Powerful pressing mechanism with low-wear, chrome-plated tongs Pre-compressor with end-sensitive cylinder and screwed cover Control box with PLC control Hydraulics Separate oil tank with pump motor and valve control Safety switch for oil temperature Container with agitator and gear motor Screw channel with discharge screw and gear motor gear motor Accessories: Briquette length monitoring Automatic on - off Location: 54634 Bitburg

Condition: used, Year of construction: 2018, Single Shaft Shredder Weima Model: WLK2000 Main Motor: 110kW Rotor Diameter: 370mm Hsdpex A Uiiofx Ag Ujfb Rotor Length: 2000mm Weight approx.: 9000kg Rotor knives size: 40x40x23mm

Condition: new, Year of construction: 2026, Weima single shaft shredder type WL 6 Power 18,5 kW Hfedpfx Aecbtpkeg Ujb Our machine concept WL 6 The Weima high performance shredders with their flexible can process all kinds of wood materials (hardwood, softwood, chipboard, MDF materials softwood, chipboard, MDF materials, plywood, veneer residues etc. ) into and, in the case of bulky materials, achieve an enormous volume reduction of the material. enormous volume reduction of the material. Mode of operation: The machine is equipped with a large hopper and can be fed by a conveyor belt or by hand. fed by means of a conveyor belt or by hand. This hopper can be adapted to individual needs and guarantees a continuous and cost effective and cost effective material feed without the need for manual assistance. manual assistance. Technical specification WL 6 / 18.5 kW hopper opening: 800 x 1.000 mm hopper capacity: 0,9 m³ working width of the rotor: 800 mm diameter of the rotor: 252 mm Driving power: 18,5 kW Rotor speed: 80 -120 rpm Number of knives: 42 pieces type and size of knives: concave / 40 x 40 mm, cutting reversible crowns Sieve perforation: 10-60 mm possible (standard 15-20 mm) Painting: WEIMA standard RAL 2002 / 7016 connected load: 400 V +/- 5% / 50 Hz weight: approx. 1.600 kg Included: - Switch cabinet ( Rittal ) incl. electrical control ( Moeller / Siemens ) and star-delta start-up - Rubber oscillating elements - V - rotor ( patented ) with knife pockets fixed in the profile - gear limit switch - Contact pressure

Condition: new, Year of construction: 2026, Compact design, high reliability and an excellent price-performance price-performance ratio: these are the advantages of this machine machine, which is perfectly suitable for briquetting materials such as wood, polystyrene, foam or paper. Special feature: the screw pre-compaction, which guarantees a high briquette quality. For quick and easy installation, the C 140 is mounted on a stable base frame. mounted on a sturdy base frame Overall dimensions: 1900 x 1410 mm Hopper opening: 1044x1044 mm hopper height: 1010 mm hopper capacity: 1,1 m³ driving power: 4 kW Briquette diameter (mm) 40 Throughput capacity (kg/h) 30-40 Hydraulic oil capacity (l) 100 Weight (kg) 530 Equipment: Press Powerful press mechanism with low-wear, chrome plated tongs Precompressor with end-position-suspended cylinder and screwed cover Control box with PLC control Hydraulics Separate oil tank with pump motor and valve control Safety switch for oil temperature Hfodpfebtnf Esx Ag Ueb Tank with agitator and gear motor Screw channel with discharge screw and gear motor gear motor Accessories: Briquette quantity monitoring Automatic On - Off Location: 54634 Bitburg