Cutting Mills Weima WNZ (art.10106)

Weima WNZ 310/600

Condition: excellent (used), Year of construction: 2007, operating hours: 21,676 h, functionality: fully functional, pressing force: 78 t, filling opening width: 750 mm, filling opening length: 1,500 mm, bale width: 1,100 mm, bale height: 750 mm, bale weight: 600 kg, overall weight: 25,000 kg, transport height: 3,000 mm, oil tank capacity: 1,000 l, power: 55 kW (74.78 HP), empty load weight: 25,000 kg, volume flow: 930 m³/h, operating pressure: 250 bar, How do you do? We are pleased to offer you a used baler of the manufacturer Presona AB, type LP 80 VH1. Godpfxovgrh Uj Afnotu The following technical data was taken from the manufacturer's operating instructions and brochures, for which we cannot accept any liability for correctness and completeness. Manufacturer Presona AB, Sweden Type LP 80 VH1 Year of manufacture 2007 Total operating hours, 21,676 hours, as of November 2024 Main press force 78 t Specific pressing force 95 N/cm² Pressing force of prepress flap 28 t Dimensions of feed chute 1,500 x 1,100 mm Filling volume / pressing cycle 2.7 m³ Throughput capacity under operating conditions 410 m³/hour Bale dimensions 1,100 x 750 mm Drive power 55 kW Tying 5-fold vertical Hydraulic oil tank volume 1,000 L Baler dimensions assembled with hopper 10,985 x 3,750 x 4,310 mm (L x W x H) Machine weight press approx. 25 t Note: The machine was used by a recycling company to compact paper, cardboard and film. The press is in good condition, in operation until January 2025 and can be inspected by appointment. We would be delighted if this machine is of interest to you. Your service team Mertens & Frowein GmbH

Condition: used, Year of construction: 1988, operating hours: 1 h, machine/vehicle number: V 516, total width: 2,000 mm, total length: 7,000 mm, total height: 1,800 mm, operating pressure: 300 bar, pressing force: 90 t, sheet thickness aluminum (max.): 5 mm, power: 11 kW (14.96 HP), empty load weight: 16,000 kg, cutting force: 90 t, year of last overhaul: 2025, Bale size 400x400 mm Force 1 Step 900 KN Force 2 Step 900 KN Steel max. 2500-3500 Kg/Std. Aluminium max. 2000 - 3000 Kg/Std. Gjdpfx Afslhqd Renjtu Driving Power 11 KW Arrangement Surface 7x2x2,5 m x m Machine weight 16 to Place: Austria Aviable: 30.01.2025

Year of construction: 1998, condition: excellent (used), NEUE HERBOLD cutting mill / granulator Universal mill - heavy version Made in stainless steel -Year of construction 1998 - made of stainless steel - from technical center (machine was used exclusively for test/demonstration purposes - Rotor diameter: 300 mm - Working width: 500 mm Gtjdpfxsh Rwc Ej Afneu - 3 rows of knives

Year of construction: 2008, condition: excellent (used), machine/vehicle number: WK43/07, Product number: 2535 Type: Foodliner 12000/8 Serial number: WK43/07 Year of construction: 2008 Capacity: 18000 - 22000 cups/hr Cups: round Ø 55 mm, round Ø 65 mm Seal: aluminium Compressed air: 6 Bar, 800 l/min. Water: 3 Bar, 1.5 l/min. Gjdpfxjikvlmo Afnjtu Power: 3 x 400V, 50Hz, 15kW Dimensions: 4250 x 2000 x 1800 mm Weight: 3500 kg Including Alpha Machine Vision Solution lid inspection system Including tool trolley

Condition: new, - Motor power 9kW - PLC-based control, two-hand safety circuit - Cutting force 35to - Splitting table straight design Gsdpfx Aed Hf Tdjfnjtu - Cutting channel: - max. blade length L= 2000mm - max. opening H= 1200mm - Machine weight approx. 4 tons - Hand guard in the area of the control panel and opposite - Forklift entry shoes included (for easy transportation of the machine by forklift truck) Stock item - immediately available Price and further information on request

Condition: good (used), Year of construction: 1994, functionality: fully functional, power: 75 kW (101.97 HP), Low-speed rotor with push floor Rotor width 2500 mm Rotor diameter approx. 400 mm Motor 75 kw Gedpfxstgqlyo Afnjtu Discharge via conveyor belt with magnetic roller

Condition: good (used), Year of construction: 1989, Shredder +press +conveyor belt+silo complete Gjdpfsr Dvdksx Afnjtu

Year of construction: 1988, condition: good (used), machine/vehicle number: 14684/1, suitable for copper cable and plastic recycling Gtodpfx Afsnvdq Nonou

Condition: refurbished (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: 12786 040, overall weight: 20,000 kg, rotor diameter: 640 mm, total length: 4,900 mm, total height: 2,600 mm, total width: 4,100 mm, rotor width: 2,000 mm, power: 203 kW (276.00 HP), rotational speed (max.): 340 rpm, input current: 415 A, Equipment: rotational speed infinitely variable, The Vecoplan VAZ 2000 M F-T is a powerful single-shaft shredder. This robust shredder offers an efficient and reliable solution for a wide range of applications. Gtjdpfx Afeurkc Rjnsu Possible applications: - Household waste - plastics - paper With its proven technology and high throughput of 4-5 tons per hour, the VAZ 2000 M F-T is the perfect choice for shredding and volume reduction in disposal and recycling processes. The pictures are examples. The pictures do not show the machine as it is offered, they only serve as an example of what the machine will look like after the overhaul. Price on request.

Condition: excellent (used), Year of construction: 2000, Rotor Width : 1350 mm Rotor Diameter : 370 mm Gjdpfx Aowf Sgmofnotu Hopper dimensions : W 1350 x 1450 mm Hydraulic infeed draw, with 45 degree tilt Engine size : 30 Kw Siewe : Ø 30mm Extra Siewe : Ø 20mm Screw conveyer : 5000 mm Extra set of knives included ( 40 x 40 mm, 4 sides ) Redler/chain conveyer : 5000 mm 45 degree angle with electro magnetic separator( nails/screws) 10 feet shipping container with control panel/hydraulic station inside Machine measures : L 3100mm ( +1000mm hydraulic draw ) x W 2100mm x H 4100 mm Complete unit still connected to power, can be examined in working condition