Used Weima Wl 3 for sale (88)

Condition: good (used), Year of construction: 2007, Single shaft shredder Weima WLK10 main motor 55kw Gtsdpfx Afjtpcn Uoneu rotor length 100cm the machine is 100% efficient

Condition: used, Year of construction: 2007, SINGLE SHAFT SHREDDER WEIMA MODEL WLK15 Gsdpfx Afjtqdxfenotu MAIN MOTOR 90KW ROTOR KNIVES SIZE 50X50 (NEW KNIVES) ROTOR LENGTH 1500MM ROTOR DIAMETER 370MM THE MACHINE IS 100% FUNCTIONAL READY TO WORK

Condition: good (used), Year of construction: 2007, Single shaft shredder Weima WLK10 Godpjtpcpnefx Afnjtu main motor 55kw rotor length 100cm the machine is 100% efficient

Year of construction: 2006, condition: used, Single shaft shredder Weima WLK10 main motor 55kw Godpfxsi Ew Tme Afnjtu rotor lenght 100cm the machine is 100% efficient

Condition: used, Year of construction: 2004, functionality: fully functional, overall weight: 4,800 kg, rotor diameter: 368 mm, number of blades: 82, rotor length: 1,500 mm, power: 45 kW (61.18 HP), type of input current: three-phase, rotational speed (max.): 80 rpm, sieve perforation: 22 mm, input voltage: 415 V, extraction nozzle diameter: 250 mm, Just had the main shaft rebalanced, main bearings and housings replaced, gearbox end needed some work doing, gearbox checked and oil changed, all drive belts good, all in had just over £7k spent. Gtjdpfx Afoxp Nm Nonsu Previously had the shredding screen replaced using Hardox with smaller holes cut for finer shred, has front mounted conveyor feeding through a magnetic separator as pictured, dust extractor and of course main control panel. All was working as it should be and then it was turned off, about 4 months ago, so needs to go back to work for someone. Looking for offers over £8K Shredder located in Carlisle.

Condition: excellent (used), CATALOG NUMBER 7726 TECHNICAL DATA - Feed hopper inlet – hydraulic lift 1200x1000mm - Discharge outlet for shredded wood diameter 200mm - rotor working width 980mm Gtjdpfsx Tg E Hox Afnou - Main motor 37kW - Number of knives 52 pcs - Knife size 40x40mm - Screen 20/25mm - Pressing drawer (hydraulic pusher) - Electric auto-reverse - Dimensions (L/W/H) 2520x2000x1740mm - Weight approx. 2500kg ADVANTAGES – German made – Screw conveyor (for wood chips) – Pressing drawer, serrated – Knives as new – New counter-knife – Very good condition – Used chipper Net price: 106,900 PLN Net price: 25,450 EUR depending on exchange rate 4.2 EUR (Prices may vary with significant fluctuations)

Condition: used, Year of construction: 2018, No. 3085 Chipper / material shredder WEIMA WLK 800 used, year of construction 08/2018 approx. 1200 operating hours For various materials such as hard plastics, paper, foils, filaments, wood or textiles. Feed opening 800 x 1450 mm F rotor Rotor diameter 260 mm Rotor speed approx. 100 rpm Motor power 30 kW knife screwed incl. various spare knives and sieves Transport dimensions approx. 3400 x 1750 x 2100 mm LWH Weight approx. 2500 kg Sales on behalf of customers, from the Hesse location In order to avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended Sale takes place in the ACTUAL condition Technical information, description of condition, year of construction and scope of delivery according to the manufacturer's brochure or previous owner, without guarantee Subject to prior sale Any warranty is excluded for used machines. The rule is "bought as seen". Images and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices plus statutory VAT, payment before pickup or shipping Gsdpfx Askzkwmjfnetu Terms of delivery: ex warehouse or location

Condition: used, Year of construction: 2023, Demonstration machine! List price: €33,390. Machine concept: The Weima high-performance shredders offer versatile applications and are capable of processing all types of wood materials (hardwood, softwood, chipboard, MDF materials, plywood, veneer scraps, etc.) into fuel chips, providing significant volume reduction even for bulky materials. Operation: The machine features a large feed hopper and can be loaded either manually or via conveyor belt. This hopper can be customized to meet individual requirements and ensures continuous and cost-effective material feeding without the need for manual assistance. A hydraulically operated ram conveys the wood waste to be shredded into the rotor’s cutting area, with operation automatically and load-dependently controlled. The internal ram guides are made of highly wear-resistant plastic (polyamide) and are adjustable. The hydraulic cylinders are mounted on universal joints to prevent lateral forces on the piston seals. The patented and profiled V-rotor is made of solid steel with a diameter of 252 mm, operating at a rotor speed of 80–120 rpm. The concavely ground, aggressive, and four-way reversible cutting knives/inserts are located in milled knife pockets on special knife holders. This patented system, which minimizes the cutting gap between counter knife and rotor, ensures high throughput, low energy consumption, and optimal discharge of shredded material. Power transmission from the electric motors is achieved via V-belts to a heavy-duty gearbox mounted on one end of the shaft. Standard features: - V-rotor with one row of knives 40 x 40 mm - Vibration-damping machine feet - Hold-down device on the ram - Horizontal ram - Control cabinet with 5m cable, incl. PLC control and LOGO! text display - Bolt-on screen - WEIMA WAP gearbox - Extraction port Ø160 mm - Straight hopper Optional equipment: - Additional rotor knife row (28 knives) - Free-cutting hopper (LOGSPACER) - Four-sided sectional floor - Fast reverse hydraulic with shock valve Gsdovfy Rzspfx Afnjtu Location:

Condition: excellent (used), Year of construction: 2018, operating hours: 1,192 h, functionality: fully functional, rotor diameter: 260 mm, rotor width: 800 mm, power: 30 kW (40.79 HP), filling opening width: 800 mm, filling opening length: 1,450 mm, working width: 800 mm, Technical data wood and plastic shredder: Manufacturer WEIMA Maschinenbau GmbH Type WLK 800 Year of construction 2018 Operating hours 1,192 hours Drive power 30 kW Speed 90 rpm Rated current 70 A Slow-blow fuse 80 A Hydraulic pressure for horizontal slide 160 bar, load-dependent or pulsed control selectable Rotor type profiled V-rotor Rotor diameter 260 mm Rotor length 800 mm Rotor speed 80 - 125 rpm Number of cutting crowns, concave, 2-row, 42 pieces Cutting crown size 40 x 40 mm Grain size 15 - 80 mm Feed opening 800 x 1450 mm Cutting chamber dimensions 720 x 700 mm Hopper capacity 0.8 m³ Machine dimensions 2,590 x 1,745 x 2,180 mm (l x w x h) PLC control Siemens SIMATIC S7-1200 Screen basket with 30 mm hole size, can be folded downwards Shredder transport weight 2.8 tonnes Machine equipment: Segmented floor 2-sided Free-cutting hopper Electromechanical drive with WEIMA WAP gearbox Hydromechanical starting clutch V-rotor (2-row) Adjustable counter blade for regulating the cutting gap Reversible counter blade Remote bearing for easy maintenance Gtodpfxswrxkle Afneu Condition of the shredder: The shredder was only used sporadically for wood and plastic shredding and is in good, ready-to-use condition. The machine is available at short notice. Scope of delivery: 1 Weimar WLK 800 shredder with control cabinet Comments: The documentation (Manual, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: ready for operation (used), Technical characteristics 2000 mm wide slow-speed shredder, with hydraulic pusher and pivoting grate support Main motor power : 75 Kw Up to 1480 RPM Hydraulic pusher motor power : 7.5 kW Gtsdpfxetpryre Afneu Number of squared knives : 58 Rotor speed : up to 110 RPM Rotor Ø 368 mm Diameters of outlet screen Ø : 20/40 mm Inclined hopper : height 1535 mm Upper part of hopper : 3280 x 2750 mm Lower part of hopper : 1800 x 2000 mm Power and Motors Voltage: 400 V Pluging: Three-phased Overall dimensions Weight: 6500 Kg

Condition: used, Year of construction: 2018, Single Shaft Shredder Weima Model: WLK2000 Gedpjx A Unlefx Afnjtu Main Motor: 110kW Rotor Diameter: 370mm Rotor Length: 2000mm Weight approx.: 9000kg Rotor knives size: 40x40x23mm

Year of construction: 2006, condition: used, Granulators - Cutting Mills Weima WNZ 310/600 22 KW Year: 2006 Power: 22 kW Application: Feed opening: 650x600 mm Gtedpforl Ru Djx Afnsu No. rotor knives: 10 No. stator knives: 2 Rotor-Ø: 310 mm Rotor-width: 600 mm Price: € 12.900,00 contact: Mr. Rainer Eckerle

Condition: excellent (used), Weima WL4 shredder, year: 2022, in excellent condition Gtsdpfsxyxchsx Afneu

Condition: new, Year of construction: 2025, Weima single-shaft shredder Type: WL 4 Rotor diameter: 260 mm Rotor width: 600 mm Self-cutting hopper Logspaser (600x1050 mm) Motor power: 18.5 kW Gjdpfx Asxwyx Sefnetu Double knife row with 28 pcs. Weight: 1300 kg Extraction nozzle: 160 mm incl. bolted extraction trough. Screen perforation: 15 / 20 mm (or as requested and agreed) Stock machine immediately available. Price ex stock Rosenheim, excluding shipping.

Year of construction: 1995, condition: good (used), 600 mm Rotor width 7,5 kw Motor 650 U/ min Gtsdpfx Afjfxg Dljnsu

Condition: new, Year of construction: 2025, Year of manufacture: 2025/2 Engine power: 18.5 kW Speed: 90 1/min Weight: 1.3 tons Gtjdperq Eu Rsfx Afneu Rotor lengths: 600 mm Rotor diameter: 252 mm Rotor knives: 28 pcs Funnel: 600 x 1050 mm

Condition: new, Year of construction: 2025, Year of manufacture: 2025/2 Engine power: 18.5 kW Gsdpfevw Tw Ejx Afnetu Speed: 90 1/min Weight: 1.3 tons Rotor lengths: 600 mm Rotor diameter: 252 mm Rotor knives: 28 pcs Funnel: 600 x 1050 mm with an extra-ribbed sliding plate

Condition: ready for operation (used), 🔧 Key Specifications Cutting System: Four-shaft configuration with two cutting shafts and two clearing shafts. Cutting Disc Diameter: Approximately 280 mm (11 inches). Cutting Unit Dimensions: Working width of 1,000 mm and length of 700 mm. Hopper Opening: Approximately 1,400 mm x 1,600 mm. Gtedpfx Afewnx Uisnju Motor Power: Typically equipped with two 18.5 kW motors. Operating Speed: Low-speed operation at around 25 rpm for high torque and reduced noise levels. Weight: Approximately 2,500 kg

Condition: used, Year of construction: 1998, Briquette press Weima TH 400 Year of construction 1998 Briquette diameter 50mm Capacity 60-80kg/h Machine no. 950-756 Main motor 7.5kW 200 Bar, 400V Including large collection container Machine is currently not working, the hydraulic block is leaking. - Year: 1998 - Documentation available: No Gtedpfswh I Ursx Afnsu - CE certificate present: No Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: excellent (used), Year of construction: 2011, operating hours: 637 h, Weima Briquetting Press C 140 with Automatic On/Off - Excellent Condition - Low Hours Operating Hours: 637 Immediately available - Subject to prior sale When it's gone, it's gone The compact design, high reliability, and excellent price-performance ratio are the key advantages of this machine, which is ideally suited for briquetting materials such as wood, polystyrene, foams, or paper. A special feature is the screw pre-compaction, which ensures high briquette quality. For quick and easy installation, the C 140 is mounted on a stable base frame. Overall dimensions: 1900 x 1410 mm Hopper opening: 1044 x 1044 mm Hopper height: 1010 mm Hopper volume: 1.1 m³ Drive power: 4 kW Briquette diameter (mm): 40 Throughput capacity (kg/h): 30-40 Hydraulic oil volume (l): 100 Weight (kg): 530 Equipment: Press - Powerful pressing mechanism with wear-resistant, chrome-plated clamp - Pre-compactor with end-position damped cylinder and bolted cover - Control panel with PLC control Hydraulics - Separate oil tank with pump motor and valve control - Safety switch for oil temperature Container with agitator and gear motor Screw channel with discharge screw and gear motor Accessories: - Briquette length monitoring Gjdpfxjyga S So Afnstu - Automatic On/Off Location: 54634 Bitburg

Condition: used, Year of construction: 2009, Briquetting press with hopper Motor 7.5 kW Briquette diameter: 50 mm Throughput capacity: 80 - 100 kg/h Weight: approx. 870 kg Oil capacity: 100 L With oil heating, agitator, and screw discharge With fill level sensor With automatic start Container size: 1500 x 1500 x 900 mm Overall dimensions: 2300 x 1800 x 1200 mm Operating hours: 3370 h Storage location: Nattheim Gtjdpfxex Twb Ss Afneu

Condition: used, Year of construction: 2017, Dimensions: 2.4 x 2 x 2 m Drive power: 2 x 18.5 kW Number of knives: 2 x 72 Rotor diameter: approx. 354 mm Rotor length: 1,000 mm Screen size: 10 mm Weima shredder type HWN-2-1000 for the reduction of wood and similar materials such as plastics or cardboard. Gsdjxvzzxepfx Afnetu The machine stands out for its robust construction, large feed hopper, and two powerful rotors for continuous material intake. Optional with new knives at an additional cost.

Condition: used, Year of construction: 2007, functionality: fully functional, Brand/Model: WEIMA THC 150 Year of manufacture: 2007 Condition: Very good Location: Spain Delivery/loading possible. Throughput capacity: up to 50 kg/h Hydraulic oil volume: 100 l Operating voltage: 400 V Gtedpfxjyh E Ncs Afnou Frequency: 50 Hz Rated current: 16 A Operating pressure: 160 bar Internal dimensions: 1100 x 1000 x 850 mm Briquette diameter: 50 mm

Condition: good (used), Year of construction: 1992, functionality: fully functional, WEIMA TH 400 briquetting machine - after technical overhaul - Made in Germany - very good condition - year of manufacture 1992 TECHNICAL PARAMETERS: power of main engine 7.5 kW machine output approx. 80 kg/h briquette diameter 50 mm feeding dimension 2000 x 1800 mm adder feeding the material to the piston stirrer machine overall dimensions (length / width / height) 240 / 190 / 200 cm weight ~ 850 kg TH hydraulic briquetting machines are compact equipment for briquette production. Briquetting machines can be filled manually or automatically directly into the hopper. The units of this series, by their small size and quiet operation, are ideal for setting up on the production floor. Characteristics: - reduction of production waste volume - low purchase costs - low energy consumption - compact design takes up little space - excellent processing quality - durable construction and long service life - trouble-free maintenance and low consumption - simple operation The main application scopes of briquetting presses are, for example: - in combination with a dust extraction or filtration and dedusting plant - for manual feeding of material Godpfx Ajt U Et Nsfnjtu - as a whole combined with a chipper (e.g. WEIMA WL4) - with a screw feeder or conveyor belt - with a mobile dust extraction system or combustion furnace

Condition: used, Year of construction: 2018, rotor diameter: 368 mm, rotor width: 1,500 mm, No. 10027 Single-shaft shredder AMIS / WEIMA WT 15 Used, year of construction 2018, approx. 250 operating hours According to our customer, the machine is fully functional and can be viewed and tested on site Single-shaft shredder for cables, plastics & recycling Feed opening 1500 x 1160 mm LW Rotor width 1500 mm Rotor diameter 368 mm Rotor speed approx. 90 rpm Motor output 90 kW Throughput capacity approx. 5 tons per hour (depending on material) System output 99 kW Power consumption 210 A Voltage 400 V / 50 Hz PLC control Siemens SIMATIC Built-in screen with 20 mm screen hole diameter Replacement screen with 50 mm screen hole diameter The high-performance shredder in the WT series is ideal for processing a wide variety of plastics - especially difficult, flexible materials such as films, filaments, big bags, tapes, carpets, textiles, foams and all loose and non-bulky waste materials. The WING-RAM swing arm ensures that even contaminated or moist material is fed safely. Incl. angled conveyor belt / discharge belt AMIS FB 7000 x 1500 x 580 / year of construction 2018 / 1.5 kW Incl. magnetic separator AMIS Installation dimensions approx. 9000 x 3500 x 3950 mm LWH Transport dimensions single-shaft shredder approx. 3000 x 2700 x 3200 mm LWH Weight approx. 12500 kg Sale on behalf of customer, ex location near 69123 Heidelberg, without dismantling, without transport and assembly Dismantling, transport and loading by us optionally possible Errors in description and price excepted Gtsdpfx Afexwdiuonsu To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical specifications, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Pictures and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices plus VAT, payment before collection or shipment Terms of delivery: ex location