Used Weiler Matador for sale (180)

Condition: excellent (used), Year of construction: 1998, functionality: fully functional, machine/vehicle number: 4397, Ladies and Gentlemen, We are selling a Weiler Praktikant 160 AC lathe built in 1998 with original Weiler 3-axis digital readout. This newer version "AC" stands out above all due to the infinitely variable speed control, which makes working on the otherwise very user-friendly machine even easier. The machine has been extensively overhauled in our workshop so that it is technically and visually in excellent condition. All guides are in good order, the gears run quietly and the levers are easy to operate. You are welcome to visit us on site to see the condition for yourself. Ijdpfx Ajq H D U Eja Eotr Availability: on request Machine no. 4397 Year of manufacture: 1998 Center height: 160mm Center width: 650mm Spindle passage: Ø 40mm Spindle speed: 20-3000 rpm stepless Tailstock taper holder: MK3 Quill stroke: 85mm Feed range longitudinal slide: 0.020 - 0.630 mm/rev Feed range cross slide: 0.006 - 0.200 mm/rev Possible thread types: Metric, inch, module, diametral pitch Metric thread pitches: 0.25 - 8mm Spindle brake: switchable Total connected load: 7.5 kvA Voltage: 400V Dimensions: approx. 1.58x0.9x1.5m (LxHxW) Weight: approx. 720kg Further equipment and accessories: 3-axis digital display, coolant device, chuck protection, jaw chuck and other accessories on request... Our service promise to you: - We are a certified master company in the field of mechanical engineering - All machines are thoroughly checked - All lubricants and any worn parts are replaced in advance - On request, we can completely or partially overhaul your chosen machine - On request, we can repaint the selected machine in the color of your choice - On request, you can order additional accessories such as tools etc. directly with the machine - On request, we can install additional accessories such as safety devices etc. - We are happy to take care of shipping and/or installation

Condition: good (used), Spare parts and accessories for WEILER lathes Itodpexvn Hhjfx Aa Esr

Condition: ready for operation (used), Weiler Commodor lathe with leadscrew and feed shaft for sale. Manufacturer: Weiler Type: Commodor Condition: used, good, still in production Scope of delivery: - Multifix B tool holder - Three-jaw chuck Iodpfx Aajxladwo Estr

Condition: good (used), functionality: fully functional, 1x Weiler MDU 260, in good condition. Hand lever carriage, hand lever tailstock, collets. Isdpsxw Ea Usfx Aa Ejtr 1x Feinbau PM1, many collets available for spindle and tailstock, hand lever tailstock.

Condition: good (used), Perfect high throughput machine for kebab, burger or pet food factory. Isdpfowlfxvox Aa Estr

Condition: ready for operation (used), Year of construction: 1990, functionality: fully functional, turning diameter over cross slide: 190 mm, spindle bore: 56 mm, turning length: 1,000 mm, For sale: used Weiler Commodor lathe, year of manufacture approx. 1990. Turning length: 1000mm. Swing over bed: 380mm. Swing over cross slide: 190mm. Spindle bore: 56mm. Spindle speed: 25–2000 rpm. Tailstock: MK4. Equipment: 2-axis digital readout by Heidenhain, 200mm three-jaw chuck, Multifix including 1 toolholder, coolant system, longitudinal and cross feeds, machine feet, various chuck keys, bed stop, live centres, complete documentation. Itjdpfx Aajxzu Ipe Eor

Condition: excellent (used), Year of construction: 1992, Weiler Condor 81 Weiler Condor 81 lathe with Heidenhain digital display, year of manufacture 1992, in very good original condition. The machine comes from the training workshop of a renowned German mechanical engineering company. Technical data: Year of manufacture: 2003 Engine lathe WEILER type Condor 81 Distance between centers: 750 mm Swing over bed: 330 mm Center height over bed: 165 mm Swing over cross slide: 180 mm Center height over cross slide: 90 mm Spindle bore: 40 mm Chuck fitting: short taper DIN 55027 size 5 Tailstock quill taper: MK 3 Quill travel: 110 mm Spindle speed: 45 – 2800 rpm, 16 steps Itsdew T U Sgepfx Aa Ejr Drive power: 3 kW Power supply: 400 Volt, 50 Hz Spindle speeds via 16-speed gearbox Required space (L x W x H): 1850 x 950 x 1400 mm Weight: 1,100 kg Accessories and equipment: Röhm 3-jaw chuck Multifix quick-change toolpost Coolant installation Heidenhain digital readout About the machine: We offer a Weiler Condor 81 lathe with Heidenhain digital display, year 1992, in very good condition. The machine is, of course, fully functional. All slides move very smoothly and evenly. Even at high speeds, the Weiler runs very quietly. This newer generation of lathes is very user-friendly and can achieve ground-like finishes. Take the opportunity to inspect this machine under power at our location and see its condition for yourself. You can find more lathes from renowned manufacturers on our website.

Condition: good (used), Year of construction: 2008, Weiler DZ 40, year of manufacture 2008, Siemens 840 D control, travel X/Z 200/350 mm, Y axis +/- 25 mm, tailstock MK 4, main spindle max. bar capacity 42 mm, spindle bore 52 mm, rapid traverse X/Z/Q 30/30/20 m/min, 16-position turret – all stations driven, shank diameter 25 mm, driven tools up to 4,500 rpm, parts tray, accessories, driven toolholders, rigid holders. Ijdpexnna Sofx Aa Eetr

Condition: excellent (used), Swing over bed 410 mm Distance between centers 1'000 mm Spindle speeds 4-3'000 rpm Itjdpfx Aok D S Rqoa Esr Control: WEILER Misc. accessories MARCELS MASCHINEN CH

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, turning diameter over cross slide: 160 mm, spindle bore: 43 mm, turning length: 750 mm, turning diameter: 330 mm, spindle speed (max.): 4,500 rpm, TECHNICAL DETAILS Turning length: 750 mm Turning diameter: 330 mm Diameter over cross slide: 160 mm Spindle bore: 43 mm Maximum spindle speed: 4,500 rpm MACHINE DETAILS Control: Siemens EQUIPMENT Itsdpfx Aasxf Hiaj Eer Collets Jaws Tool holder

Condition: excellent (used), spindle bore: 38 mm, turning diameter over bed slide: 340 mm, turning diameter over top slide: 200 mm, turning length: 750 mm, total length: 1,700 mm, total width: 650 mm, total height: 1,500 mm, spindle speed (max.): 2,800 rpm, spindle speed (min.): 12 rpm, overall weight: 800 kg, Equipped with: – Tailstock – Multifix tool holder – RÖHM 3-jaw chuck (Ø 160 mm) Itodpfx Aaewxq Ico Eor

Condition: reconditioned (used), Year of construction: 2006, operating hours: 42,738 h, functionality: fully functional, turning diameter over cross slide: 328 mm, turning length: 2,000 mm, turning diameter: 570 mm, spindle bore: 83 mm, spindle speed (max.): 2,500 rpm, spindle speed (min.): 4 rpm, overall weight: 4,300 kg, Equipment: documentation/manual, For sale: Well-maintained Weiler E 55 Universal precision lathe with cycle control. Year of manufacture: 2006 Control: Siemens Sinumerik 810D Powerline Operating hours: 42,738 h The ball screw on the Z-axis was recently replaced! The drive belt has also just been replaced! Technical Data: - Distance between centers: 2000 mm - Center height: 280 mm - Swing over bed: 570 mm - Swing over cross slide: 325 mm - Spindle bore: 83 mm - Drive power 60%/100% duty cycle: 20/17 kW - Speed range gear stage 1: 1–625 rpm - Speed range gear stage 2: 4–2500 rpm Total weight: 4300 kg Accessories: - 3-jaw chuck 315 mm - 5 Parat tool holders - Machine feet Isdpjxzu Enjfx Aa Ejtr - Closed steady rest, clamping range 120–270 mm - Coolant device - Chip tray - Operating manual The machine can be inspected under power! Available immediately! We will load the machine for you! Transport can be arranged on request!

Condition: like new (used), Year of construction: 1992, Lathe WEILER Precision center lathe in ergonomic design The Weiler Ergodor is the first German ergonomically designed lathe. It creates a more humane workplace and prevents health problems. The key feature is that the employee can operate this lathe while standing or sitting. Technical data Center width 470 mm Turning length 430 mm Center height 145 mm Rotation Ø over cross slide 160 mm Rotation Ø over bed 300 mm Spindle head, short taper flange Bayonet mounting DIN 55022 size 5 or Camlock clamping D 1-ASA-4 Spindle bore 36 mm DIN 55022 size 5 Spindle inner taper Spindle speeds Speeds 30 - 3550 rpm S Speeds 15 - 3550 rpm Brake motor 3 kW Brake motor 1.5/3 kW Itedpfovgqu Hjx Aa Esr Face slide travel 150 mm Travel of the top slide 100 mm Feed rates and thread pitches on the gearbox switchable steps 30 Section 2 1.5/3 kW 38 Gear ratio in headstock 3 20 Long feeds 150 mm via change gears 100 mm via toothed belt Face feeds = 1/2 Longitudinal feed values Metric pitches 0.2 - 12 mm Module pitches 0.1 - 4 Dimensions 1450 x 640 x 1500 mm Dimensions 1450 x 640 x 1500 mm Net weight 1000 kg Acceptance according to toolmaker's accuracy DIN 8605 20 Built according to the rules of occupational safety, official test no. A. EM 11 1545/80. Encombrement 1450 x 640 x 1500 mm

Condition: good (used), Year of construction: 2000, Weiler Primus VC, Isdpfx Aaov Ifxis Eetr Year of manufacture 2000, Digital display, Center distance 500 mm, Max. turning diameter over slide 150 mm, Spindle speed up to 4,000 rpm, Spindle bore 40 mm, Spindle drive 1.5 KW, Multifix tool holder, 24 longitudinal feeds, Metric thread, Inch thread,

Condition: used, machine/vehicle number: 11756, second-hand WEILER LZ 280 sliding headstock and sliding headstock lathe center height 125mm center width: 800mm spindle speed approx. 26-2000 rpm 1 x three-jaw lathe chuck Ø 125mm with inner and outer jaws, brand new Multifix size A with 2 interchangeable holders Emergency stop/switch unit, rear chip guard, all change wheels present, drive disk, Isdpfovd Dbnjx Aa Eetr storage tray, machine light, new socket, 15 collets from Ø 3.5 - 18.5 mm, collet clamping tube, fixed point and MK 2 sleeve for clamping tube, bed stop, chuck protection cover, various turning tools and operating instructions. The machine is located at our premises in 71334 Waiblingen-Beinstein and is available immediately. A viewing of the machine is possible by arrangement.

Condition: used, turning length 800 mm turning diameter 280 mm Iedpfx Ajxacg Rea Eotr turning diameter over slide rest 150 mm spindle bore 42.0 mm tailstock quill taper MT 3 MK bed width 208 mm turning speeds 42 - 2022 U/min spindle taper DIN 55027/5 quill stroke 90.0 mm voltage 380 V total power requirement 3.0 kW weight of the machine ca. 750 kg range L-W-H 1800 x 800 x 1250 mm Due to its design (type, performance, feed rates, etc.) it can be used successfully in training workshops, but also for toolmaking and repair shops. Equipment: - robust conventional lead/spindle lathe - WMW 3-jaw chuck Ø 150 mm - faceplate 280 mm - MULTIFIX quick-change holder, with insert - movable tailstock - chuck key - machine base with storage area - pole-changing drive motor - operating instructions

Condition: good (used), functionality: unexamined, machine/vehicle number: 10279, turning diameter over cross slide: 200 mm, spindle bore: 35 mm, turning diameter: 300 mm, center height: 150 mm, turning length: 750 mm, total length: 1,860 mm, total width: 700 mm, total height: 1,800 mm, spindle speed (max.): 2,800 rpm, spindle speed (min.): 40 rpm, overall weight: 1,030 kg, - Operating voltage: 380 V - Connected load: 3 kW - Nominal current: 25 A Ijdpfev Irgtex Aa Eotr - Frequency: 50 Hz Equipment: - Tailstock - Multifix type B tool holder - Three-jaw chuck (diameter: 160 mm) - 2-axis digital display from the manufacturer RSF

Condition: good (used), Year of construction: 2012, functionality: fully functional, Weiler Praktikant VC precision lathe Manufacturer: Weiler Type: Weiler Praktikant VC precision lathe Year of manufacture: 2008 Condition: used, very good, serviced and inspected with inspection protocol according to factory specifications Technical details Turning diameter: 250 mm Turning length: 650 mm Center height: 160 mm Swing diameter over bed slide: 320 mm Max. swing diameter over cross slide: 190 mm Main spindle: Speed range – main spindle: 30 – 4,000 rpm Power output – main spindle: 10 / 6.0 kW Number of gear stages: 1 Spindle head: 5 / DIN 55027 Spindle diameter in front bearing: 70 mm Spindle bore: 40 mm Usable bar diameter: 40 mm Tool holder: System: MultiFix B Turning tool shank cross-section: 20 x 20 Tailstock: Iedpfx Asxd Tknsa Estr Quill travel: 85 mm Quill diameter: 40 mm Tailstock taper: MK 3 Feeds: Number of feeds: 24 Longitudinal feed: 0.02 – 0.63 mm/rev Cross feed: 0.006 – 0.2 mm/rev Thread cutting: Metric: 0.25 – 8 mm Inches: 80-2 1/” Module: 0.25 – 4 mm Travel distances: Cross slide travel: 150 mm Top slide travel: 110 mm Swivel movement: 180 ° Total power requirement: 15 kVA Machine weight: approx. 1.0 t Space requirements: approx. 2.5 x 2.0 x 2.0 m Scope of delivery: – Weiler Praktikant VC precision lathe – Machine lamp – Documentation – Three-jaw chuck – Tailstock – Multifix tool holder – 8x machine feet – Original tool set

Condition: good (used), Year of construction: 1991, Machine type Lathe - cycle-controlled Manufacturer WEILER Type E30 year of construction 1991 Control Weiler Country of origin Germany Additional information Cycle-controlled lathe WEILER - E30 Technical details Turning diameter max. 330 mm Turning length 750 mm Weiler control Center height 165 mm Swing diameter over bed 330 mm Max. turning diameter over facing slide 160 mm Face slide travel 180 mm Longitudinal bed slide travel 395 mm Main spindle: Speed range - main spindle 1 - 4,500 min/-1 Isdpfxer Dvqzo Aa Eotr Drive power - main spindle 9 / 11 kW Max. Torque 165 Nm Spindle head DIN 55027 / 5 Spindle diameter in front bearing 70 mm Spindle bore 40 mm Usable bar diameter ( - ) mm Tool holder: Type MultiFix Turning tool shank cross-section 20 x 20 mm Tailstock: Quill stroke 110 mm Quill diameter 50 mm Tailstock holder MK 3 Feed rates: Rapid traverse max. 10 m/min Feed force 6 / 3 kN Feed range 0 - 20 mm/-1 Thread cutting: metric 0.1 - 400 mm Inch 1/4 - 56 G/1" Module 0.125 - 28 mm.II DP 1 - 224 G/".II Number of threads max. 50 Total power requirement 10 kVA Machine weight approx. 1.5 t Space requirement approx. 2.8 x 2.0 x 2.0 m

Condition: excellent (used), Precision lathe, turning machine, lathe, center lathe, center lathe Itedpfexapm Rox Aa Eer -Manufacturer: WEILER, lead screw lathe type commodor 42 -Machine bed: hardened -Turning length: 900 mm -Turning Ø over bed: 400 -Turning Ø over support: 190 mm -Spindle bore: Ø 56 mm -Spindle speeds: 45 - 2000 rpm -Three-jaw chuck: Röhm Ø 200 mm -Four-jaw chuck: Röhm Ø 200 mm -Tailstock mount: MK3 -Drive: 4 kW -Accessories: 18x Multifix tool holder with rotating center see photos -Lathe dimensions: 2200/1300/H1410 mm -Weight of lathe: 1380 kg

Condition: new, Year of construction: 2025, CONDOR VC plus The new dimension in conventional precision lathes. A high-quality, powerful and energy-efficient precision lathe for the highly productive area of production and toolmaking, but also for training and further education High-quality, energy-efficient, precise and universally applicable in production, training and further education. It impresses with: future-oriented technology maximum accuracy durability user-friendly ergonomics minimum space requirement and a wide range of accessories. The consistent and innovative further development of the tried-and-tested Condor series is the economical and intelligent solution for your daily applications. Technical data: WORKING AREA Center height 180 mm Swing diameter over bed 360 mm Swing diameter over facing slide 190 mm Center width 800 mm TURNING SPINDLE Spindle head DIN 55027/DIN ISO 702-3 size 6 Spindle bore 57 mm Spindle diameter in front bearing 90 mm MAIN DRIVE Drive power 60 %/100 % ED - / 10.5 kW Speed range 25 - 4,000 min-1 Number of speeds infinitely variable FEED RANGE Number stepless Longitudinal 0.01 - 6 mm/rev Plan 0.003 - 2 mm/rev THREAD CUTTING RANGE Metric thread 0.1 - 20 mm REITSTOCK Quill diameter 50 mm Quill stroke 110 mm Internal taper DIN 228 MK 3 ACCEPTANCE ACCURACY DIN 8605 Equipped with WEILER WTS 15 VC plus screen display - Large, clearly arranged 15" touch screen, rotatable and tiltable, resolution 1366 x 768 - Change of operating screens via swipe movements - Operating functions can be called up via app manager - Control panels can be freely configured, placed and scaled as required - Drawings / sketches can be imported from PDF files Can be zoomed individually via USB interface - Video-supported maintenance of the machine - Context help menu (instead of screen display WEILER VC plus) Itodsqwipnopfx Aa Eer The machine is located in our showroom in 71334 Waiblingen-Beinstein and is available immediately. Please contact us regarding equipment.

Condition: repair required (used), turning length 1000 mm turning diameter over bed 380 mm turning diameter over slide rest 190 mm number of spindle speeds 25 - 2000 U/min. turning speeds 18 Stk. spindle bore Ø 56,0 mm tailstock quill taper MT DIN 228 / MK 4 quill stroke 150 mm bed width 310 mm spindle taper DIN 55027 / 6 feeds - longitudinal 0,022 - 0,8 mm/U feeds - cross 0,011 - 0,4 mm/U thread M 0,3 - 10,0 mm voltage 380 V total power requirement 7,5 kW weight of the machine ca. 1600 kg Basic functions are available Machine with various leaks Sold in current condition at a special price ! Lathe with precision ground and induction hardened bed. Very suitable, for example, for use in workshops and teaching facilities. - machine video - ?v=zCGu4i6V5dM Furnishing: - robust lead and pull spindle lathe - FORKARDT 3-jaw chuck Ø 200 mm, with chuck key - MULTIFIX steel holder - size B - with 3x inserts - movable tailstock, including keyless chuck - Chip protection back wall - EMERGENCY stop button at the front Itedpfsw U U Uqex Aa Eor - adjustable bed stop - Coolant system including coolant pan - User manual (PDF)

Year of construction: 1977, condition: ready for operation (used), A Weiler precision lathe, overhauled by Mammut in 2004, is available. Center height: 125mm, max. swing over bed/cross slide: 260mm/140mm, distance between centers: 500mm, spindle bore: 28mm, clamping range: 1mm-26mm, drilling diameter: 22mm, cutting edge height: 22mm, tailstock quill diameter: 80mm, tailstock quill travel: 80mm, tailstock offset: 450mm. Documentation available. An on-site inspection is possible. Iodpoxqqmtjfx Aa Eotr

Condition: good (used), Year of construction: 2007, functionality: fully functional, Weiler C30 x 750 precision lathe (2007) Manufacturer: Weiler Type: C30 x 750 Year of manufacture: 2007 Availability: several machines available Condition: very good, used, from training workshop, last maintenance 09/2024 Center width 750mm Circulation diameter over bed 330mm Rotation diameter facing slide 160mm Movement of facing slide 180mm Bed width 240mm Turning tool cross-section 20 x 20mm Spindle head according to DIN 55027 size 5 Spindle diameter in front bearing 70mm Spindle bore 40.5mm Inner taper of the main spindle 5mm Drive power 60 %/100 % ED 9/7KW Total speed range 1 - 4,500 rpm Feed force longitudinal 6,000N Planar feed force 3,000N Feed range 0.001 - 10 mm/rev Rapid traverse speed longitudinal/plane 6/3 m/min Metric threads 0.1 - 400mm Inch thread 56 - 1/4 G/inch Module thread 0.125 - 28mm DP thread 224 - 1 Dp Max. Threads 99 Quill diameter 50mm Quill stroke 130mm Inner taper of quill MK3 Length 1750mm Width 1350mm height 1670mm Weight 1300kg Scope of delivery Itodsxd Tiwopfx Aa Esr Rota S Plus 200-52 jaw chuck Multifix Machine light Coolant system Machine feet Original documentation Weiler maintenance log 09/2024

Condition: ready for operation (used), Year of construction: 2003, Weiler E50 x 1000 precision lathe (2003) Manufacturer: Weiler Type: E50 x 1000 Year of manufacture: 2003 Condition: good, used, under power Operating hours: 43.000h Technical data see pictures. Included in delivery: - Original documentation Itodpfjxd Tikjx Aa Esr - Rota S Plus 250-62 - Bezel - Parat 4 compartment tool turret