Used Wedge Zinc for sale (623)

Condition: used, maximum load weight: 31,170 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 05/2022, next inspection (TÜV): 02/2026, loading space length: 13,000 mm, total width: 2,550 mm, total height: 4,000 mm, Equipment: ABS, 3-axle timber transport trailer * 8x OptiPa bolsters * 16x OptiPa one-piece aluminum stanchions * Stable aluminum bulkhead at the front approx. 2500 mm high * Maximum fifth wheel load approx. 12000 kg * Front overhang (kingpin to front edge of KoRa) 1550m * Air suspension with 3x 9t axles from SAF * Axle reinforcement for off-road * Axle lift first axle, automatic function, with traction aid * Scales * Total weight technically possible 39,000 kg * WABCO Smart Board * EBS braking system * All cables are protected inside the longitudinal beams * Smooth sheet metal cover 3mm welded through between the longitudinal beams * Tires: 6x branded tires size 385/65 R 22.5 * LED reversing lights and work lights Kjdpsx H E Hpsfx Abljlt * LED tail lights and Position lights * Plastic fender, 180 degrees, above each axle * Underrun protection made of round tube, mounted as high as permitted * Maneuvering coupling at the rear * Ten welded ring elements for lashing on each side * 2x toolbox approx. 600x400x400, plastic * Side impact protection made of anodized aluminum * KTL coating with zinc phosphating, maximum corrosion protection Also available for rent at short notice. We are happy to provide you with further information

Condition: used, Single-column Eccentric Press MÜLLER GEFREES Type 60 SV DK (Identical to ExP60) Very lightly used eccentric press in original condition Machine No. 5250686 Year of manufacture: 1986 Nearly new condition Press force: 60 tons Throat depth: 280 mm Table surface: 740 x 560 mm Ram surface: 385 x 200 mm Through-hole in table: 300 x 200 mm Table surface (intermediate plate): 740 x 560 mm Through-hole in intermediate plate: Ø 103 mm Intermediate plate thickness: 70 mm Clamping pin bore: 40 mm Table height above floor: 815 mm (with intermediate plate) Installation height, max.: 275 mm (with intermediate plate) Installation height, max.: 345 mm (without intermediate plate) Stroke adjustment: 10–90 mm Ram adjustment: 60 mm Strokes per minute: 100 Motor power: 3 kW Drive: 380 Volt, 50 Hz - Mechanical rotary wedge clutch with pneumatic actuation Kedoi A A Tbspfx Ablslt - Spring-loaded single-jaw brake, controlled by cam disc - Stroke release via pneumatic footswitch - Overload protection with breaking plate in the ram - Table height adjustment via 2 threaded spindles - Manual central lubrication system by BEKA Schmiertechnik - Operating manual and pneumatic diagram included Space requirement (L x W x H): 1400 x 1100 x 2200 mm Weight: 3.4 tons In very good, almost new condition

Condition: used, Clamping table, sine table, tilting table Tilting clamping table Table length: 1130 mm Table width: 300 mm Klsdoinldpspfx Ablst Table height: 112 mm Tilting angle: 2° Tilting angle max.: 7° - Tilting angle 2° via leadscrew - Max. tilting angle 7° manually lifted to stop Overall dimensions L x W x H: 1450 x 300 x 112 mm Weight: 275 kg Good condition Clamping plate, ideal for production of wedge strips

Condition: used, Decoiler and recoiler for coil material HMS Type BA 1.5-06/80 Machine no. Year of manufacture: 1991 Coil weight max. 8000 kg Coil outside diameter max. 1600 mm (with coil car) Coil outside diameter max. 2000 mm (without coil car) Diameter of coil support disc Ø 1700 mm Coil inner diameter, expansion range: 460-520 mm Coil width, nominal width max. 630 mm Width of expansion jaws: 750 mm Height of mandrel above base plate: 1500 mm - Mandrel driven by hydraulic motor with gearbox and gearwheel Klodpfx Abohx R Etjlet - Pneumatic overrun brake on mandrel TWINFLEX - Hydraulic service brake - Hydraulic stop brake - Hydraulic expansion of the mandrel, centrally via wedge slider system - Hydraulic pressing arm with hydraulically driven double pivot roller - Coil car with 12 ton lifting capacity and 300 mm lift - Decoiler on above-floor traveling frame with powered cross-travel drive - Hydraulic unit installed externally (was also used for other functions on a strip processing line) - Without electrical control cabinet (there is a control cabinet which supplied the entire strip processing line) Transport dimensions L x W x H 3500 x 1900 x 2500 mm Net weight approx. 5 tons Good condition – not electrically operational

Condition: good (used), Year of construction: 1981, Ref. -No.: 10447 Manufacturer: SKODA Type: WD 200 Year of construction: 1981 Retrofit: 2010 Type of control: CNC Control: SIEMENS SINUMERIK 840D Storage location: Halberstadt Country of origin: Germany X-Travel: 9000 mm Y-Travel: 4000 mm Z-Travel: 1450 mm W-Axis: 2000 mm Bed width: 2000 mm Bed height: 550 mm Spindle Diameter: 200 mm Quill Stroke: 1600 mm Rotary Table (Lxw): 4000 x 4000 mm Table Load: 80000 kg Clamping Area: 3000 x 3000 mm Turning Speeds: 257 - 2570 RPM Spindle taper: 120 Automatic feeds: 342 mm / rev Spindle Turning Speed - Stepless: 1,5 - 630 RPM Kljdpeym Nbpjfx Ablot Max. Torque On The Boring Spindle: 20000 Nm Rapid Traverse: 16000 m / min Drive Capacity - Spindle Motor: 9,8 - 35,5 kW Total Power Requirement: 75 kW Bore Depth: 2000 mm Vertical headstock movement on the column: 3150 mm transverse movement of the stand on the bed: 4000 mm Lowest position of the spindle axis above the bed: 1100 mm Spindle speed when moving the quill forward: 1,6 - 300 max. rpm Drill feeds (spindle, quill) continuously variable in the range: 1,6 - 1600 mm / min Milling feeds (headstock vertical, column horizontal) infinitely variable: 1,6 - 1600 mm / min Machine length: 11350 mm Machine width: 5450 mm Machine Height: 7350 mm Weight Of The Machine Ca.: 65 t Further information: Threading: 22 metric threads, pitch range 0.5 - 12mm 32 Whitworth threads, pitch range 28 - 1 (gears) Accessories: - console for tools - 1 set of operating tools - ejector and fastening wedges for spindle - lubricating press - 1 set of spare parts for electrical equipment - clamping base plate - setting stick with electrical equipment Machine can be inspected under power by appointment.

Condition: used, This listing is for a Velp Scientific ZX3 Advanced Vortex Mixer. Variable speed operation, electronically controlled up to 3000 rpm Automatic start in touch mode or continuous operation Universal voltage / frequency model Accessories fit by simple pressure Optimum resistance to chemicals from technopolymer casing Excellent stability with zinc alloy base Large, anti-slip rubber feet for staying in required position Ksdpfx Aboxzgx Tsljlt IP 42 protection against particles and liquids

Condition: new, Year of construction: 2026, Take advantage of our portfolio of plastic abrasive media for processing softer materials such as brass, copper, or aluminum. Plastic abrasive media offer a gentler and less aggressive treatment. Like ceramic abrasive media, plastic abrasive media are available in a wide range of grit strengths, shapes, and sizes. We select the optimal media for your components and processes to ensure the best results. Overview of the different geometries and their properties: - Cones (K) have a high mass, resulting in efficient material removal. Their rounded shape enables gentle processing. - Pyramids (P), with their edges, are ideal for deburring operations. Thanks to their pointed design, these media can reach difficult areas such as boreholes. - Tridents (DZ) are especially suitable for processing complex components, such as gear parts or workpieces with grooves. - Paraboloids (PA), similar to cones, use their rounded shape to excel at smoothing and polishing, delivering gentle and even surface treatment. - Lenses (L), with their lower weight, are well suited for soft materials and deliver gentle and consistent material removal. - The Wedge (K), thanks to its versatile geometry, is an optimal abrasive for deburring. Its pointed shape means it can easily access narrow slit areas. - Tetrahedrons (T) function similarly to pyramids, with their edges providing efficient deburring. Their sharper corners allow them to better access complex areas. As an experienced partner, we provide expertise in the field of vibratory finishing. Together with you, we develop efficient solutions to achieve optimal process results. If you are interested, we look forward to hearing from you. We will gladly provide you with non-binding advice. Kodpsyq N S Nofx Ablelt The European Commission provides a platform for out-of-court online dispute resolution (ODR platform). This offer serves solely as an online presentation of our products. Contract negotiations take place via telecommunications (e-mail, telephone, messaging platform). We will initially send you a non-binding offer, which will also include our general terms and conditions with legal notice and information about your right of withdrawal, before any purchase or contract is concluded.

Condition: good (used), Technical Data of the Pallet Racking System: Racking system: SSI Schäfer Type: PR 600 Technical Data – Installation: Number of racking rows: 01 unit Length per racking row: 17,040 mm Number of bays per row: 06 units Number of levels plus ground level: 06 units Technical Data – Capacity: Pallet spaces per bay: 21 units Pallet spaces per racking row: 126 units Total pallet spaces: 126 units Max. bay load: 19,000 kg Lowest clear shelf height: 1,080 | 880 mm Assumptions: Load carrier: Euro pallet EN 13698-1 Dimensions: 1,200 x 800 x 150 mm Total height incl. pallet: n.d. Weight per pallet (max.): 1,055 kg Scope of supply: 07x pallet rack frames, used Material finish: sendzimir galvanized Frame type: P215 Profile dimensions: 120 x 100 x 2.5 mm Including horizontal and diagonal braces, and base plates The frames are pre-assembled (bolted lattice) Height: 14,100 mm Depth: 1,050 mm 72x pallet rack beams, used Material finish: RAL 4002 red violet Box profile: 120 x 50 mm Beam type: TRV1-270-125-30 CE Clear span: 2,700 mm Connector: 5 HK (hooks) Maximum load per pair of beams: 3,165 kg, with uniformly distributed load Note: The functionality of the beams is fully ensured in spite of holes. SSI project with heat baffles mounted as per manufacturer's specifications! 144x safety pins, used Material finish: sendzimir galvanized For securing beams against inadvertent lifting 28x wedge anchors, new Manufacturer: Hilti Model: HST2 V3 M12x105 5-25 Design: carbon steel, galvanized Approved for: cracked concrete 14x shims, used Finish: fully galvanized For leveling the rack frames when installing on uneven surfaces 01x load capacity sign with field and shelf load details, manufacturer and job number dimensions: 420 x 297 x 3 mm Your contacts at our company: Kjdpfx Ajyfg Hmjblslt Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is only available for collection. Delivery or shipment is possible at extra cost, which can be quoted separately depending on the delivery location and the scope of delivery.

Condition: new, functionality: fully functional, mileage: 20 km, power: 140 kW (190.35 HP), fuel type: diesel, gearing type: automatic, overall weight: 3,500 kg, fuel tank capacity: 93 l, emission class: euro6, color: black, number of seats: 9, Year of construction: 2026, fuel: diesel, machine/vehicle number: NEW-13, Equipment: ABS, additional headlights, air conditioning, airbag, car registration, central locking, cruise control, electronic stability program (ESP), fog lights, immobilizer system, low noise, navigation system, onboard computer, parking heater, parking sensors, power assisted steering, second-hand vehicle warranty, sliding door, soot filter, spoiler, summer tires, traction control, trailer coupling, MB 319 L2H1 9-Seater Mercedes Benz Sprinter 319 Bluetec ♦ EURO 6 Emissions Standard ♦ Seats: 2+7 (9 total) ♦ M1 COC/2007/46 for 3.5t ABS, ASR, ESP, HSA, OBD Driver airbag Power steering Central locking Immobilizer Remote control key Active Service System "Assist" Additional air conditioning for passenger compartment Kljdeiv Evnopfx Ablot Additional hot water system Tyre set 235/65 / R16C Right-hand sliding doors First aid kit, two fire extinguishers, warning triangle, repair kit (tool kit), wedge 7 M1 seats, manufactured by SEGE 2 seats with ISOFIX Seats equipped with: armrests, 3-point seat belts, handles Seats upholstered in black eco-leather with silver accents Seats mounted on rail system Solid partition wall between passenger and luggage area Tinted windows (installed in original Mercedes seats) Curtains on windows LED interior lighting Wired microphone USB charging ports in cabin 4 x speakers in passenger area Fixed entry steps on both sides of the vehicle Seat bases covered in leg area ♦ New vehicle. Unregistered, with 2-year warranty. ♦ All vehicles come with the necessary documents and hold the European Certificate of Conformity (COC) / 2007/46 for M1 3.5t. Order vehicle – delivery in approx. 2 months. Photos shown as example for order vehicle. Delivery, leasing, or financing available. Contact us: Auto-Wardenga Irenäus Wardenga (DE) – also available via WhatsApp Check our dealers: Germany – Auto-Wardenga KFZ-Handel ————— Worldwide partner | Bus producer | Luxury Bus Producer | Luxury Buses | Bus Concept | Art is details.

Condition: used, maximum load weight: 211 kg, overall weight: 850 kg, axle configuration: 1 axle, first registration: 03/2026, loading space length: 2,070 mm, loading space width: 1,080 mm, total width: 1,495 mm, total height: 1,150 mm, A56 GW26GA01430, Product information "STEMA FT 8.5-20-10.1B" incl. jockey wheel and shock absorbers for 100 km/h with confirmation - all players from BSG Chemie Leipzig have signed here; subsequently coated with UV-resistant clear lacquer * Optimum road holding due to stable chassis with safety V-drawbar * Robust rubber spring axle with independent wheel suspension Kljdpjyqdtujfx Ablot * Maintenance-free compact wheel bearings * Solid side walls with double corrosion protection through GALVALUME (aluminum-zinc coating) * Large and stable lashing hooks for securing loads (model-dependent) * Sturdy cast steel toggle-clamp fasteners (model-dependent) * Non-slip, waterproof phenolic plywood floor * All-round protected multifunction lights * Incl. lid Low loader by STEMA, type FT 8.5-20-10.1 with lid, gross weight: 850 kg, overrun braked, lid color: green/white, 100 km/h approval ...and much more. Subject to errors and prior sale.

Condition: used, maximum load weight: 2,184 kg, overall weight: 2,700 kg, axle configuration: 1 axle, first registration: 03/2026, loading space length: 3,070 mm, loading space width: 1,830 mm, loading space height: 350 mm, total width: 2,320 mm, total height: 970 mm, A54 GW26NG000061, * 100 km/h version with installed shock absorbers * Secure and professional angle lever locks made of cast steel Kledpfx Absyqdr Doljt * Robust and durable hinge strips * Maintenance-free rubber suspension axle and quality brand tires * Drop-down side panels at the front and rear * All-round protected safety lighting * Double corrosion protection thanks to GALVALUME aluminum-zinc coating * Underride guard according to EU standards Low loader tandem axle manufactured by STEMA, type SySTEMA ST .2, total weight: 2,700 kg, overrun braked, 3.01 m x 1.83 m, 100 km/h ...and much more. Errors and prior sale excepted.

Condition: used, maximum load weight: 211 kg, overall weight: 850 kg, axle configuration: 1 axle, first registration: 03/2026, loading space length: 2,070 mm, loading space width: 1,080 mm, total width: 1,495 mm, total height: 1,150 mm, A57 GW26GA01495, Signatures of Eintracht Frankfurt players subsequently sealed with clear lacquer Klodoyqdq Hspfx Ablst Product information "STEMA FT 8.5-20-10.1B" incl. jockey wheel and shock absorbers approved for 100 km/h with certification* * Optimal road handling due to stable chassis with safety V-drawbar * Robust rubber suspension axle with independent wheel suspension * Maintenance-free compact wheel bearings * Sturdy side panels with double corrosion protection through GALVALUME (aluminum-zinc coating) * Large and stable lashing hooks for load securing (model-dependent) * Robust cast steel angle lever locks (model-dependent) * Slip-resistant, waterproof phenolic plywood floor * All-round protected multifunction lights * Incl. lid/cover Low-loader, manufacturer: STEMA, type: FT 8.5-20-10.1 with lid/cover, gross weight: 850 kg, inertia braked, lid color: green/white, 100 km/h approval ...and much more. Subject to errors and prior sale.

Condition: used, maximum load weight: 718 kg, overall weight: 1,000 kg, axle configuration: 1 axle, first registration: 03/2026, loading space length: 2,100 mm, loading space width: 1,530 mm, loading space height: 350 mm, total width: 2,020 mm, total height: 945 mm, A55 GW26NG000088 Low loader by STEMA, model SySTEMA ST .1 * 100 km/h version with shock absorbers installed * Secure and professional steel cast angled lever locks * Robust & durable hinge bands * Maintenance-free rubber suspension axle and quality brand tires * Aluminum side walls, foldable at the front and rear * Full perimeter protected safety lighting * Double corrosion protection through GALVALUME aluminum-zinc coating * Underride guard compliant with EC standards Gross weight: 1,000 kg, braked, low loader, open bed, 2.10 m x 1.53 m, some impact damage on the planks, 100 km/h ...and much more. Errors and prior sale excepted. Klodsyqdm Ispfx Ablet

Condition: used, maximum load weight: 718 kg, overall weight: 1,000 kg, axle configuration: 1 axle, first registration: 03/2026, loading space length: 2,100 mm, loading space width: 1,530 mm, loading space height: 350 mm, total width: 2,020 mm, total height: 945 mm, A53 GW26NG000092 Low-loader trailer, manufacturer: STEMA, model: SySTEMA ST .1 * 100 km/h version with built-in shock absorbers * Secure and professional steel cast cam latches * Robust & durable hinge bands Kodpfxeyqdmuo Ablolt * Maintenance-free rubber-sprung axle and quality brand tires * Drop-down aluminum side panels, front and rear * All-round protected safety lighting * Double corrosion protection thanks to GALVALUME aluminum-zinc coating * Underrun protection compliant with EC regulations Gross weight: 1,000 kg, overrun braked, low-loader, open box bed, 2.10 m x 1.53 m, damage to planks due to impact, 100 km/h ...and much more. Subject to errors and prior sale.

Condition: used, Year of construction: 2022, operating hours: 1,150 h, functionality: fully functional, Basic package Inventhor 6: - Load-sensing system - Fuel tank 500 liters - Longitudinal conveyor: belt length 2,900 mm, belt width 800 mm - Centrally arranged wear strips - 24V electrical control system – additional electric pump for actuating the following functions when the engine is off: - Raise/lower/fold rear conveyor, open/close comb flap, open/close comb, raise/lower folding hopper - Complete radio remote control - Large side GRP service doors - Maintenance-friendly engine compartment - LED lighting package: engine compartment and rear - Hydraulically reversible fan Kljdpfoxx N Dgex Ablot - Three-sided loading protection - Folding hopper - Fire extinguisher - Maintenance ladder - Toolbox - Acoustic start-up warning - Doppstadt telematics system - Paint finish: RAL2011 deep orange Additional equipment: - Driveline 260 kW – EV - 2-axle semi-trailer chassis unit - Size L shredding system – 20 teeth - Size L limiter - Additional hydraulic ports 35–80 l/min - Hydraulic travel drive - Hopper extension 350 mm, watering system both sides - Hopper wedge Size L with NM brush - Rear conveyor 7 m - Overband magnet neodymium - Frame for 7 m overband magnet Delivery date by arrangement

Condition: used, maximum load weight: 1,950 kg, overall weight: 2,700 kg, axle configuration: 2 axles, first registration: 02/2026, loading space length: 4,000 mm, loading space width: 2,010 mm, loading space height: 115 mm, total width: 2,540 mm, total height: 640 mm, A26 GW26NGA00003 Passenger Car Transport Trailer, Manufacturer: STEMA, Model: FTAK 27-40-21.2 Gross Weight: 2,700 kg, inertia-braked, WAP901 hand winch, low-loader, hydraulically tiltable. Base frame: Extremely robust and torsion-resistant with crash-tested safety V-drawbar. Tiltable, sturdy frame design with safety locks. All frame components are hot-dip galvanized for corrosion resistance. Running rails: Extra-wide, perforated, non-slip zinc-plated running rails with large elongated holes for securely fastening tie-down straps. The extra-wide rail makes it easy to transport vehicles with different wheelbases. Integrated ramps allow for easy loading and unloading. Side walls: Signal red powder coating (corrosion-proof and scratch-resistant) for enhanced safety. Kledpfxjyn Ubqj Ablot Vehicle not refurbished ...and much more. Errors and prior sale excepted.

Condition: used, Year of construction: 2013, operating hours: 14 h, functionality: fully functional, machine/vehicle number: TJ-350-20/40 KPSI //TJ-160-20/40 KPSI, total width: 1,500 mm, total length: 3,000 mm, total height: 2,500 mm, pressure: 2,800 bar, operating pressure: 2,800 bar, fuel: diesel, overall weight: 3,000 kg, rotational speed (min.): 700 rpm, rotational speed (max.): 1,500 rpm, high-pressure hose length: 60,000 mm, year of last overhaul: 2025, Equipment: rotational speed infinitely variable, A Bundle of 5 ea. UHP waterblast machines, c/w a vast variety of spares and accessories, as follows: 1 x High-Pressure Water Jet Unit with Deutz-MWM V-8 Diesel Engine adjustable pressure 0–1400 bar and 0–2800 bar, dump system, with plunger changeout kit as follows: 1400 bar at 99 liters/minute, and 2800 bar at 46 liters/minute. The fluid head of this pump, including stuffing boxes and valves will be used for both 1400 bar and 2800 bar. Changing pressure range between 1400 and 2800 Bar is carried out by a simple and easy plunger changeout. The unit was built in 2013 and kept operational as a backup machine, but was only used once for 14 hours at 2800 bar for a bundle heat exchanger cleaning project. This UHP machine is mounted on a zinc coated steel skid. The Deutz-MWM engine was purchased as a used engine, with approx. 3,000 operating hours , and was fitted in 2013 with a new Jetech UHDW high-pressure water jet pump. In addition, a large amount of accessories and spare parts are included, such as dump guns & foot valves, swivel joints, surface cleaners, rotary nozzles, high-pressure lances, nozzle inserts, seals, special tools, etc. An identical UHP waterblast unit is also available, but with a Scania V-8 engine and counting 850 operating hours at max. 1400 bar / 99 liters/minute. That unit is housed in a 20ft. container, with an 800 l Diesel Tank, a work bench /vise, Furthermore, there are 3 additional high-pressure water jet units with 110 kW power each, 2 of which have Volvo TD71A Diesel Motors, plunger changeout kits for 1400 and 2800 bar. A third unit is a Kamat K11000 with 2800 Bar OP. and a JCB Dieselmax engine. Also available is a hydraulic heat exchanger cleaning device with a rotating lance mounted on a scissor lift table, suitable for very large heat exchangers. All equipment comes from the closure of my company due to retirement. A buyer is sought for all machines and accessories as a complete package. Klsdoxc E Trjpfx Ablet

Condition: new, bore capacity in steel (diameter) 25 mm throat 185 mm bore stroke 50 mm spindle taper MK 3 Kljdpjd Sb Ayjfx Ablst spindle turning speed range 50 - 2500 U/min 178 mm 480 mm table surface area 700 x 180 mm connected load frequency 230 V total power requirement 0,75 kW weight of the machine ca. 160 t dimensions of the machine ca. 0,75 x 0,8 x 0,9 m domestic equipments • Digital depth gauge • Adjustable guides with wedges • Large 12-speed range from 75 to 3200 rpm • Smooth running due to hardened and ground gears running in an oil bath • • Right-left rotation • Prismatic guides in all axes • Gear head can be swiveled 90 ° • Chip protection with safety circuit Machine base optional.

Condition: used, Year of construction: 2018, Overview  The gravity filling machine is a rotating machine that works automatically and is suitable for filling bottles, cans made of zinc sheet or jars. It is used to add liquids (such as brine, oil, vinegar, sauce, sugar water, etc.) into containers filled with solids. It is also used to fill empty bottles. The filler block can be viewed at any time.  Technical details  Number of filling places: 48  Pitch circle diameter: 1560 mm  Capacity (last):  250- 300 bottles/ min at 500ml fruit syrup. For used twist-off cap an additional capper would have to be organized  160 - 200 bottles/ min at 250ml maple syrup  Used plastic cap can be applied by installed AROL capper  Dimensions  Length: 3.000 mm Width: 2.500 mm Height: 2.500 mm Weight: 6.500 kg   Electr. characteristics Voltage: 400 V - 50 Hz  Auxiliary voltage: 24 V DC  Installed power: 20 kW  Scope of delivery  Filler | Zilli& Bellini | GD48/12 | 2018 Capper | Arol | TSI - EURO VP - W6 | 2018 Ksdpfxjnhikij Ablolt

Condition: good (used), Technical Specifications for the Pallet Racking System: Racking System: Mecalux Technical Specifications for Installation: Number of rack rows: 01 unit Length per rack row: 17,625 mm Number of bays per rack row: 09 units Number of levels plus ground level: 02 units Volume Specifications: Pallet spaces per bay: 06 units Number of pallet spaces per row: 54 units Total number of pallet spaces: 54 units Included in scope of delivery: 10x pallet rack uprights, used Material finish: sendzimir galvanized Frame profile: 120 x 69 x 1.75 mm Including horizontal and diagonal bracing, base plates Uprights are pre-assembled (bolted lattice work) 2,000 mm high 1,100 mm deep 36x pallet rack beams, new Material color: RAL 2001 orange Klsdpfx Abevzappoljt Beam type: TB-S 100 Box section profile: 100 x 50 mm Clear width: 1,825 mm Max. load per pair of beams: 2,000 kg with evenly distributed load 72x integrated safety pins, new For securing the longitudinal beams against unintentional lifting 40x wedge anchors, new Manufacturer: Hilti Model: HST2 M12x105/10 Design: Carbon steel, galvanized Approved for: cracked concrete 20x leveling plates, used Version: fully galvanized For leveling the rack uprights installed on uneven floors 01x load capacity sign with field and compartment load details, manufacturer and order number Dimensions: 420 x 297 x 3 mm Your contact persons in our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is offered for collection only. If transportation or shipping is required, this will incur additional costs. Please enquire with us for exact costs, which vary depending on delivery location and scope.

Condition: new, Scope of delivery includes: Heavy-duty anchor, HST2 V3 M12x105 5-25 Order quantity: 25 pcs. Manufacturer: Hilti Version: Carbon steel, zinc-plated Approved for: cracked concrete Through-fix installation: + Pre-fix installation Diameter: M12 Drill hole Ø / Depth: 12 x 88 mm Nominal embedment depth: 80 mm Effective embedment depth: 70 mm Anchor length: 105 mm Clamping thickness: 10 mm Weight per piece: 0.100 kg Your contacts in our company: Kjdpfx Abowhfluelslt Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is only available for collection. If shipping or delivery is required, additional costs will apply, which can be requested from us depending on the delivery location and scope.

Condition: good (used), clear span: 1,400 mm, total length: 7,510 mm, shelf height: 1,750 mm, Technical data for the pallet racking system: Rack system: Stow Model: Pal Rack NS Technical data for installation: Number of rack rows: 01 unit Length per rack row: approx. 7,510 mm Number of bays per rack row: 05 units á 1,400 mm Number of levels plus ground level: 02 units Scope of delivery includes: 06x pallet rack uprights, used Material color: RAL 5015 sky blue Upright type: PNFB12 Profile dimensions: 85 x 65 x 1.75 mm Including horizontal and diagonal bracing, base plates The uprights are pre-assembled (bolted lattice construction) 1,750 mm high 1,100 mm deep 20x pallet rack beams, used Material color: orange U-profile: 150 x 50 x 3.00 mm Connector: 4 HK (hooks) Design: header beam Clear opening: 1,400 mm 40x safety pins, used Material color: Sendzimir galvanized For securing the cross beams against accidental lifting 24x wedge anchors, new Manufacturer: Hilti Model: HST2 M12x105/10 Material: carbon steel, galvanized Kledpfx Abew I R Slolst Approved for: cracked concrete 12x shimming plates, used Finish: fully galvanized For leveling rack uprights positioned on uneven floors 01x load sign With information on bay and compartment loads, manufacturer, and order number Dimensions: 420 x 297 x 3 mm General information about the item: This item is only offered for collection. If transport or dispatch is required, additional costs will be incurred, which can be quoted separately depending on delivery location and scope.

Condition: good (used), clear span: 1,450 mm, total length: 7,760 mm, shelf height: 1,750 mm, Technical details for the pallet racking system: Racking system: Stow Type: Pal Rack NS Technical setup data: Number of rack rows: 01 pc. Length per rack row: approx. 7,760 mm Number of bays per rack row: 05 pcs. at 1,450 mm each Number of levels plus ground level: 02 pcs. Currently in stock: approx. 2 sets! Scope of delivery includes: 06x pallet rack frames, used Material color: RAL 5015 sky blue Frame type: PNFB12 Profile dimensions: 85 x 65 x 1.75 mm Including horizontal and diagonal braces, base plates Frames are pre-assembled (bolted construction) 1,750 mm high 1,100 mm deep 20x pallet rack beams, used Ksdpfx Asw I Sx Tsblolt Material color: orange Beam type: PNBH0443/1.5 Box profile: 130 x 50 mm Connector: 4 hooks Design: box end beam Clear width: 1,450 mm 40x locking pins, used Material color: sendzimir galvanized For securing the beams against accidental lifting 24x wedge anchors, new Manufacturer: Hilti Model: HST2 M12x105/10 Material: carbon steel, galvanized Approved for: cracked concrete 12x leveling shims, used Design: fully galvanized For leveling rack frames installed on uneven floors 01x load plate With information on bay and compartment loads, manufacturer, and commission number Dimensions: 420 x 297 x 3 mm General information about the item: This item is only offered for collection. Any requested transportation or shipping of this item is associated with additional costs, which can be provided upon request depending on the delivery location and scope.

Condition: used, Your contact person in our home: Mr: André evening Mr: Marcel Brahms Mr: Simon blank We offer you 100 used depth requirements of the manufacturer Nedcon to purchase. This depth Edition is suitable also for other manufacturers. Kjdpfxsdqkf Is Abljlt Technical data to the depth requirement: Shelf system: Nedcon Type: NS In the scope of delivery included: 100xTiefenauflagen, used Material color: compl. zinc-plated f. stand depth: 800 mm Overall length: 800 mm clear span width: 710 mm C-Profilabm.: approx. 60 x 50 mm Traverse Edition: approx 40 mm Material thickness: 2.0 mm Weight / unit: 1,983 kg Our services at a glance: (Prices on request) -Installation, construction our general conditions of erection are to be observed -Shelf testing Shelf inspection according to DIN EN 15635 carried out to comply with the BGR 234 Visual inspection for all shelf systems -Delivery with our own fleet of vehicles (without discharge)

Condition: good (used), clear span: 3,600 mm, total length: 18,510 mm, shelf height: 1,750 mm, Technical Data for the Pallet Racking System: Racking System: Stow Type: Pal Rack NS Installation Data: Number of rack rows: 1 unit Length per rack row: approx. 18,510 mm Number of bays per rack row: 5 units at 3,600 mm each Number of levels plus ground level: 2 units Volume Data: Pallet locations per bay: 12 units Pallet locations per rack row: 60 units Total pallet locations: 60 units Based on: Load carrier: Euro pallet EN 13698-1 Dimensions: 1,200 x 800 x 150 mm Overall height incl. pallet: n.d. Max. weight per pallet: 389.50 kg Scope of supply includes: 06x Pallet rack uprights, used Material color: RAL 5015 sky blue Upright type: PNFB12 Profile dimensions: 85 x 65 x 1.75 mm Incl. horizontal and diagonal bracing, foot plates Uprights are pre-assembled (bolted truss design) Height: 1,750 mm Depth: 1,100 mm 20x Pallet rack beams, used Material color: orange Beam type: PNB0472 Box profile: 120 x 50 mm Connector: 4 HK (hooks) Clear span: 3,600 mm Max. load per pair of beams: 1,500 kg, with evenly distributed load 40x Safety pins, used Material finish: Sendzimir galvanized For securing beams against unintentional lifting 24x Wedge anchors, new Manufacturer: Hilti Klsdpjw I Tfnsfx Ablet Model designation: HST2 M12x105/10 Material: galvanized carbon steel Approved for: cracked concrete 12x Levelling plates, used Version: fully galvanized For leveling rack uprights installed on uneven floors 01x Load capacity sign Indicating bay & shelf loads, manufacturer, and commission number Dimensions: 420 x 297 x 3 mm General information: This item is offered for collection only. Any additional transport or shipping requests will incur extra costs, which can be quoted separately depending on the delivery location and scope. Please enquire with us for further details.