Used Wedge Zinc for sale (704)
Sort results
- Lowest price Highest price
- Newest listings Oldest listings
- Shortest distance Farthest distance
- Newest year of manufacture Oldest year of manufacture
- Latest update Oldest update
- Manufacturer A to Z Manufacturer Z to A
- Relevance
- Lowest price
- Price
- Highest price
- Price
- Newest listings
- Release date
- Oldest listings
- Release date
- Shortest distance
- Distance
- Farthest distance
- Distance
- Newest year of manufacture
- Year of construction
- Oldest year of manufacture
- Year of construction
- Latest update
- Update
- Oldest update
- Update
- Manufacturer A to Z
- Manufacturer
- Manufacturer Z to A
- Manufacturer
- designation from A to Z
- Description
- designation from Z to A
- Description
- Model from A to Z
- Model
- Model from Z to A
- Model
- Lowest reference
- Ref.No.
- Highest reference
- Ref.No.
- Shortest runtime
- Runtime
- Longest duration
- Runtime
- Relevance
- Relevance
Success:
Your message has been sent.
Listing
Petershagen
1,155 km
Low loader semitrailer
SCHWARZMÜLLER3-Achs-Jumbo-Schiebeplanen-Stufenauflieger
Call
Condition: used, maximum load weight: 27,020 kg, overall weight: 34,000 kg, axle configuration: 3 axles, first registration: 09/2009, loading space width: 2,480 mm, total length: 13,860 mm, total width: 2,550 mm, total height: 4,000 mm, Equipment: ABS, Construction description* Manufacturer: Schwarzmüller, Type: X303 / X-Series
* 3-axle semi-trailer, vehicle class O4
* High-quality steel frame welded construction
* Wheelbase 1,310 / 1,310 mm
* Overall length approx. 13,840 mm
* Overall width approx. 2,550 mm
* Overall height approx. 4,000 mm
* Fifth wheel height approx. 1,200 mm
* Distance from kingpin to center of 1st axle: 6,440 mm
* Track width front and rear: 1,950 mm each
* 12 pairs of recessed lashing eyes according to UVV
* 2 mechanical support winches at the front
* Rear impact protection
* 2 chock blocks
* Retractable drawbar hook at the rear
* Plastic mudguards
* Aluminum combination rub rail
* Steel underrun protection
* Lateral impact protection
* Spare wheel holder
* Plastic toolbox
* Rear marker boards
Chassis* Air suspension low-loader unit
* Low-maintenance drum brake axles
* Lifting and lowering device
* 3 axles with single tires
* Tires 235/75 R17.5 140J
* Steel rims 6.75 x 17.5 inches
Braking system* Two-line compressed air braking system
* With automatic load-dependent brake force control
* With ABS and EBS
* Operating pressure 6.5 bar
* Spring-loaded parking brake
* Parking brake on the 2nd and 3rd axles
Floor* Wooden floor made of spruce, laid lengthwise with tongue and groove
* Screen-printed top layer with flush outer frame
Body and sliding tarpaulin* Fixed aluminum hollow profile front wall
Ledpfx Aloz S R R He Ioai
* Front wall with aluminum corner posts
* Bolted rear portal with aluminum corner posts
* Double doors at the rear
* 6 sliding center posts
* 4 rows of locking slats
* Bilateral plastic sliding tarpaulins
* Strap reinforcement with direct tensioning buckles
* Front and rear rod tensioning closure
* Tensioning gear at the front
* Eccentric locking mechanism at the rear
* Edscha sliding tarp system "LITE"
* Bilateral aluminum special guide rail profile
* Light-transmitting plastic tarpaulin roof
Electrical system* 24-volt electrical system
* 7-chamber tail lights
* Design according to EU directives
Paintwork* Steel grit blasting
* Zinc dust primer
* Painting with 2-component commercial vehicle acrylic paint
* Color of chassis and body: Gray
Weights* Technically permissible total weight: 39,000 kg
* Permissible total weight according to vehicle data sheet: 34,000 kg
* Permissible payload according to vehicle data sheet: 27,020 kg
* Unladen weight according to vehicle data sheet: approx. 6,980 kg
* Fifth wheel load: 12,000 kg
* Axle load: 3 x 9,000 kg
Success:
Your message has been sent.
Listing
Halberstadt
1,309 km
CNC - Machining Center Universal - 5 Axis
HANDTMANN / BAVIUSHBZ Trunnion 120
Call
Condition: good (used), Year of construction: 2014, Ref. -No.: 10553
Manufacturer: HANDTMANN / BAVIUS
Type: HBZ Trunnion 120
Year of construction: 2014
Type of control: CNC-Steuerung
Control: Heidenhain TNC 640
Storage location: Halberstadt
Country of origin: Germany
Machine-No.: 200XXXXX
X-Travel: 1270 mm
Y-Travel: 1100 mm
Z-Travel: 900 mm
Table Height: Ø 1200 mm
Table Load: 2000 kg
Max. Tool Weight: 20 kg
Max. Tool Length: 90 x 200 / 24 x 400 mm
Max. Tool Diameter: Ø 130 mm
Tool Taper: HSK 100
Numbers Of Tools In Magazin: 40
Tool Piece Magazine With: 140 Pcs./pcs.
Spindle Turning Speed - Stepless: 14.000 RPM
Max. Torque: 15000 Nm
Laodpfx Alszc D Aao Ioi
Rapid Traverse X-Axis: max. 60 m / min
Rapid Travel Y-Axis: max. 60 m / min
Rapid Traverse Z-Axis: max. 60 m / min
Machine length: 7500 mm
Machine width: 5500 mm
Machine Height: 3500 mm
Weight Of The Machine Ca.: 26 t
Rapid traverse C-axis: max. 25 RPM
Rapid traverse A-axis: max. 20 RPM
A-axis (swivel axis): - 30 / + 120 °
C-axis (rotary table axis): 360 °
Further information:
- Horizontal machine, Y-axis arranged vertically
- Machine stand designed as a welded construction
- set up on height-adjustable precision wedge shoes,
chip tray with cooling lubricant device,
for external splash water cooling
capacity: approx. 400 liters, with clean water pump,
LP circuit, approx. 40 1/min at approx. 5 bar and
rinsing nozzles on the Z-axis and/or the spindle
- Complete safety housing
- Stainless steel interior lining
- Work area lighting
- Manual loading door to the work area with
polycarbonate safety window with glass front panel
- Side viewing window to the work area with polycarbonate safety pane
with glass front pane
- Maintenance area freely accessible
- HSK 100 hollow shank taper
- Tool clamping via springs, tool release hydraulically
- Tool clamping control
- Cone cleaning
- incl. spindle orientation
The machine can be viewed under power by arrangement.
Success:
Your message has been sent.
Listing
Wiefelstede
1,085 km
Wedge bar chuck
ForkardtF 315
Call
Condition: good (used), Wedge bar chuck, power chuck, three-jaw chuck, three-jaw lathe chuck
-Mouth size: Ø 315 mm
-Interchangeable jaws: soft
-Short taper mount: Ø 135 mm
Laodpfsb A Rqljx Al Ioi
-Bolt circle: 172 mm
-Weight: 90 kg

Get information now
+44 20 806 810 84
+44 20 806 810 84
List now
*per listing / month
Success:
Your message has been sent.
Listing
Essen
1,052 km
Low loader semitrailer
DINKEL4-Achs-Jumbotieflader - doppelte Rampen
Call
Condition: used, maximum load weight: 44,980 kg, overall weight: 58,000 kg, axle configuration: > 3 axles, first registration: 09/2024, next inspection (TÜV): 09/2025, total width: 2,550 mm, Equipment: ABS, You can find our complete vehicle inventory, including vehicles available for immediate and short-term delivery, on our website.
Excerpt from the equipment list. Complete equipment list available upon request.
Chassis, bent
* Special steel frame made of high-strength fine-grain steels, electrically welded at the joints, well-dimensioned outer frame
* 4-axle arrangement. Wheel protection above the axles with spray mist suppression
* All steel parts sandblasted
* Lateral impact protection made of anodized aluminum mounted
* Increased point load of approx. 30,000 kg over approx. 4,000 mm
* Special design in the bent area for maximum low-bed length in combination with AluLeg outrigger supports instead of telescopic outrigger winches, max. rear swivel radius of the tractor unit approx. 2,100 mm
Special superstructure with rear beam extension
* Self-supporting aluminum roof beam / profile approx. 120 x 100 mm, sliding tarpaulin with plastic flaps
* Rear beams extendable to approx. 4,200 mm
* Three sliding beams per side with rubber cord relief
* Additional center beam locking in the roof beam and parking position, by means of a pull cable and spring latch
* Lifting roof mechanically adjustable, lifting height approx. 400 mm, can be operated on both sides or on one side, without opening the opposite side and the doors
* Additional height adjustment of approx. 480 mm in approx. 40 mm increments with height adjustment in the beams
* Front overhang on the front wall for operation under tarpaulin up to a total height of approx. 4,400 mm
* Four rows of stackable approx. 150 mm aluminum slats on the side, bottom 450 mm pockets, above 4 rows of single pockets
* Only 3 rows of insert slats in the upper bed. Spacing between slats evenly distributed
Floor
* Approx. 27 mm special water-resistant glued beech plywood, rough surface
* Steel sheet in the wheel arch area
* Forklift truck accessible according to DIN standard
* Outer frame flush with the surface
Brakes
* WABCO compressed air brake system with EBS according to EC standard 71/320 EEC including PREV (parking release safety valve)
* Spring brake cylinders as parking brake
* Wabco Smart Board with odometer and aggregate load indicator
Axles
* 4 x 10,000 kg SAF/Sauer with drum brakes in low-loader design
* Air suspension with lifting and lowering device, total stroke approx. 230 mm
* Third and fourth axles as friction-jointed trailing axles with electric and mechanical lock
Twin tires
* 235/75 R 17.5, -16-ply, incl. E-wheel holder. without E-wheel
Ljdpfx Aljlthgue Ijai
Paint finish
* Chassis in RAL 3002 red, solid color
* Center beams, axles coated with KTL black
* Corner beams in hot-dip galvanized design
* Plastic parts black
* Hot-dip galvanized parts unpainted
* Rims in factory silver
* Superstructure in RAL color, solid color
Special equipment incl.
* Air suspension in ECAS design, operated on the semi-trailer
* Overwidth signs front and rear in zinc-plated, steplessly telescopic design with attached warning lights including socket for rotating beacons (small panels)
* Sliding tarpaulin cover locking additionally from the outside
* 4 beam adapters for special outer frame profile, to lock the center beams as desired
* PVC sliding tarpaulin, color similar: RAL 9006 silver
* Roof tarpaulin translucent, in overwidth and overheight design, flat hooks, tarpaulin folds, closures with pawl lock /OCS
* Telescopic socket for rotating beacon including beacon on the rear left
* Outer frame for machine transport with app
Success:
Your message has been sent.
Listing
Legden
1,028 km
Low loader semitrailer
GOLDHOFERSTZ-VP 6 (245) A (2+4) Tiefbettauflieger
Call
Condition: used, maximum load weight: 64,900 kg, overall weight: 94,100 kg, axle configuration: > 3 axles, first registration: 08/2021, Gooseneck, detachable
* Loading platform: 3,750 mm x 2,480 mm
* Maximum technical saddle load: 30,000 kg (without using the front axle)
* Hydromechanical steering with multi-chamber hydraulic cylinder
* Hydraulic lifting and lowering function
* 2 support cylinders
* Hydraulic differential lock
* Operating elements for hydraulic functions on the left-hand side in the direction of travel, including a pressure gauge with a diagram for determining saddle load, as well as a pressure gauge for monitoring the pre-tension pressure in the steering system
* Access ladder to the gooseneck
* Hydraulic claw locking for the platform or axle
* Multifunction quick coupler
* Air gun for cleaning the multifunction quick coupler
----
Front 2-axle axle assembly
* 4 wheels per axle line, ball-bearing swivel axle units
* Axle manufacturer / BPW
* Axle width: 2,750 mm / Wheelbase: 1,510 mm
* Single tires: Conti 245/70 R 17.5 143/141K (146/146 F), tread HT3, 3PMS
* Hydraulic axle equalization, lift: 600 mm
* Ride height: 1,145 mm + 340 mm / - 260 mm
* Additional lifting option for all axles in the front axle assembly
* Floor covering: sheet metal
* Additional warning sign holders, mounted on the front axle assembly
----Braking system with TIM
Drum brake all-wheel drive air brake system with diaphragm brake cylinders
* Automatic load-dependent brake (ALB) (AGS)
* Parking brake by means of spring-loaded cylinders
* EBS / ABS (Electronic Braking System) manufactured by KNORR-BREMSE
* Socket for EBS on the front end of the gooseneck
* Vehicle stability control RSP (Roll Stability Program)
----Flatbed platform, single telescopic
* Two external box-shaped outer/inner beams
* Height of the outer beams: 300 mm
* Carrier width of the outer beams: 730 mm + 120 mm edge strip
* Front end with coupling claws
* Without floor covering between the two longitudinal beams
* (L x W) 7,500 mm x 2,750 mm, telescopable by 2,800 mm to a maximum of 10,300 mm
* With a separating point
* Loading height, loaded: approx. 450 mm, ground clearance: approx. 150 mm
* Including a short, permanently welded-on front ramp
* And 1 pair of aluminum ramp wedges, at the front
----Rear 4-axle axle assembly
* 4 wheels per axle line, ball-bearing swivel axle units
Ljdoz Ivnujpfx Al Ijai
* Axle manufacturer / BPW
* Axle width: 2,750 mm / Wheelbase: 1,510 mm
* Single tires: Conti 245/70 R 17.5 143/141K (146/146 F), tread HT3, 3PMS
* Hydraulic axle equalization, lift: 600 mm
* Ride height: 1,100 mm + 385 mm / - 215 mm
* Floor covering: sheet metal
----Combined excavator-tipping body
* (Length x Width) 5,770 mm x 880 mm/1,538 mm
* Splash guard with water-absorbing mats on all axles
* Aluminum partition sheet in the excavator body, front and rear, plug-in
----Load securing
Gooseneck
* 4 pairs of threaded sockets M30
* 1 pair of lashing points LC 20000 daN
* 2 pairs of lashing points LC 800 daN
Front axle assembly
* 3 pairs of threaded sockets M36 on the loading platform (16,000 daN)
* 1 pair of threaded sockets M36 on the side (16,000 daN)
* 1 pair of lashing points LC 20000 daN
Loading platform, flatbed
* 1 pair of lashing points LC 20000 daN
* 3 pairs of lashing points LC 10000 daN
* 3 pairs of threaded sockets M 30
* 3 pairs of threaded sockets M30 on the inner beam
Axle assembly
* 2 pairs of lashing points LC 10000 daN
* 2 pairs of threaded sockets M36 on the loading platform (16,000 daN)
* 3 pairs of rail pockets 100 x 50 mm (LC 2000 daN)
* 1 pair of threaded sockets M36 in the excavator body (16,000 daN)
* 4 pairs of el
Success:
Your message has been sent.
Listing
Neunkirchen
1,146 km
Polymat 70
Richard Stuhlmann & CoPol. 70
Call
Condition: repair required (used), functionality: not functional, Year of construction: 1969, overall weight: 2,000 kg, total length: 1,300 mm, total height: 2,000 mm, We are offering this Richard Stuhlmann & Co. Polymat 70, manufactured in 1969, which requires repairs.
Manufacturer: Richard Stuhlmann & Co.
Model: Polymat 70
Lasdpfo Agi Izex Al Iji
Year of manufacture: 1969
Condition: Requires repairs
The machine has hydraulic problems; it may be possible to repair it, or it can be used as a source of spare parts for an existing machine.
We also offer accessories for the machine, which can also be purchased.
For example:
Guide wedge WC9 + WC10
Guide rod WC9 + WC10
Guide mandrel Ø85 + Ø110
Please feel free to submit a realistic offer.
If you have any questions or require further information, please send us a message or call us.
Success:
Your message has been sent.
Listing
Altenglan
1,168 km
RFID communication module terminal block
SiemensSIMATIC RF180C
Call
Condition: used, functionality: fully functional, input voltage: 24 V, Siemens SIMATIC RF180C RFID communication module with PROFINET connection block
Industrial RFID communication module for connecting up to two RFID readers to PROFINET networks.
Manufacturer: Siemens
Product series: SIMATIC Ident
Model: RF180C
Device type: RFID communication module
Components:
Ledpj Ah Ez Sefx Al Ijai
Communication module RF180C: 6GT2002-0JD00
Connection block M12 / 7/8": 6GT2002-1JD00
Technical data:
Communication interface: PROFINET IO
Ethernet transmission rate: 10/100 Mbit/s
Number of connectable RFID readers: 2
Reader interface: RS-422
Reader connections: 2 x M12, 8-pin
Serial transmission rate: Max. 115.2 kbit/s
PROFINET connections: 2 x M12, D-coded
Voltage connections: 7/8", 5-pin
Supply voltage: 24 V DC
Operating voltage range: 20–30 V DC
Maximum current consumption: 1.1 A
Protection rating: IP67
Operating temperature: 0 to +60 °C
Storage temperature: -40 to +70 °C
Diagnostics: LED status indicators
Housing base module: Glass fiber reinforced thermoplastic
Connection block: Zinc die-cast
Mounting: Screw mounting
Condition: Used
Available quantity: 2
Success:
Your message has been sent.
Listing
Wiefelstede
1,085 km
Separating wedge
unbekannthydraulisch
Call
Condition: good (used), splitting wedge, separating wedge, pressing pliers, hydraulic crimping pliers
-Separating wedge: Split wedge, hydraulic
-Intermediate dimension: 65 mm
-Insertion depth: 40 mm
Lasdpfxovvagkj Al Iei
-Dimensions: 565/154/H105 mm
-Weight: 20.1 kg
Success:
Your message has been sent.
Listing
Bad Honnef
1,107 km
Panel saw HOLZ-HER 1255 - used -
Holz-Her1255
Call
Condition: excellent (used), Panel saw HOLZ-HER 1255 - used -
Welded frame with extremely high rigidity,
pneumatically retractable spacer,
stable locking of the saw carriage at the top and bottom,
locking in vertical cutting is electrically monitored,
foldable plunging lever on the saw unit,
retractable splitting wedge for cut-outs,
control panel at eye level,
digital display on the length stop,
digital display for horizontal cutting,
rip fence device,
lifting roller transport system,
adjustable support,
dust extraction system TRK,
dust-tested
----- Technical data -----
Cutting length: 5300 mm,
Cutting height: 2200 mm,
Trimming height: 2100 mm,
Cutting depth: 60 mm,
Minimum height on folding rail: 120 mm,
Saw blade Ø: 250 mm,
Motor: 4 kW,
Dust extraction connection Ø: 120/100 mm,
Compressed air: 6 bar,
Space requirement (LxWxH): 6500x1650x3050 mm,
Weight: 900 kg
Quality information:
Ljdpoyyzp Hjfx Al Ioai
- Guide rails renewed/reconditioned
- complete basic inspection
- complete basic cleaning
- electrical system checked
- immediately ready for use
Success:
Your message has been sent.
Listing
Germany
1,293 km
Lathe - cycle controled
WEILERE 40 x 1000
Call
Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, Universal lathe – cycle-controlled / Brand: WEILER / Type: E 40 x 1000
Year of manufacture: 2008
A lathe designed for high-performance / highly efficient applications in
manufacturing, toolmaking, research institutes, repair work, as well as for
training and further education.
Operating hours (November 2026): 39.160 h
The machine can be inspected under power by prior appointment.
TECHNICAL SPECIFICATIONS:
- Control system: Siemens SINUMERIK 810D powerline using Weiler “SL2” software
* Graphical contour programming with automatic intersection point calculation
* Automatic tool angle monitoring (check for contour violation)
* Contour stitching cycle
Working range:
- Centre-to-centre distance/turning length: 1.000 mm
- Swivel diameter over bed: 435 mm
- Swivel diameter over cross slide: 200 mm
- Maximum travel of cross slide: 260 mm
- Bed width: 330 mm
- Turning tool cross-section (H x W): 25 x 25 mm
Main / turning spindle:
- Speed range: 1 – 3.500 rpm
- Gear stages: continuously variable
- Drive power: 20,5/17 kW
- Spindle head to DIN 55027, size 6
- Spindle diameter at front bearing: 110 mm
- Spindle bore: 66 mm
- Internal taper of the main spindle: metric 70
- Maximum chuck diameter: 200/250 mm
- Maximum torque: 450 Nm
Feeds:
- Feed force (longitudinal/transverse): 8.000/5.000 N
- Feed range: 0 – 20 mm/min
- Maximum rapid traverse speed: 10/5 m/min
Thread cutting:
- Metric: 0.1 – 400 mm
- Inch: 1/4 – 56 threads per inch
- Module: 0,125 – 28 mm
Tailstock:
- Quill diameter: 65 mm
- Quill stroke: 110 mm
- Quill taper: MK 4
- Total power rating: 30 kVA
- Operating voltage: 400 V, frequency: 50 Hz
- Machine weight: 2,7 tons
Lasdpj Aic Dajfx Al Isi
- Space requirements: 2,6 x 2,2 x 1,85 m
ACCESSORIES/EQUIPMENT:
- 2 mobile chip protective covers
- PARAT 4-position quick-change tool holder, size 2 with internal cooling, incl.
operating key and 1 WD 2/25 quick-change holder
- 3-jaw wedge-bar chuck (manual chuck with quick-change jaws),
SCHUNK ROTA-S plus 250-62, center hole: 62 mm, spindle mount: Z235
- Workplace lighting
- Tapered sleeve for the main spindle, metric 70 / MK5
- MK5 Fixed Centring Tip
- Operating hours counter
- Chip removal via a extendable chip tray
- High-capacity coolant pump with 2 speed settings, 400 V, 40 l/min at 2.5 bar,
max. 5.5 bar, max. 70 l/min, immersion depth 160 mm, for 50 Hz
- Additional G1/4" coolant connection on the cross slide
- Documentation
- CE marking
No guarantee is given as to the completeness or accuracy of the technical specifications
or the equipment. - Subject to prior sale.
Success:
Your message has been sent.
Listing
Bad Honnef
1,107 km
Panel saw ELCON ADVANCE 215 DSX-A -used-
ELCONADVANCE 215 DSX-A
Call
Condition: excellent (used), ELCON ADVANCE 215 DSX-A panel saw – used
automatic clamps for trimming the underside,
pneumatically retracting feed table,
stable locking mechanism for the saw carriage at the top and bottom,
locking mechanism in vertical cutting monitored electrically,
retractable spacer wedge for cutouts,
control panel at eye level,
digital display on the length fence,
digital display for horizontal cutting,
scoring device with counter-rotation,
dust extraction system TRK,
Lsdjyq Rwyspfx Al Ieai
dust-tested,
strip-cutting device
----- Technical data -----
Cutting length: 6,300 mm,
Cutting height: 2,100 mm,
Trimming height: 2,000 mm,
Cutting depth: 80 mm,
Saw blade diameter: 300 mm,
Motor: 4 kW,
Compressed air: 6-8 bar,
Space requirement (LxWxH): 7,700 x 2,000 x 3,000 mm
Quality information:
- Guide rails renewed
- Complete basic inspection
- Complete basic cleaning
- Electrical system checked
- Immediately ready for use
Success:
Your message has been sent.
Listing
Peine
1,244 km
Skip truck
MERCEDES-BENZArocs 1835 K Absetzkipper Topzustand, deutsch
Call
Condition: used, mileage: 267,563 km, power: 260 kW (353.50 HP), first registration: 08/2018, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, next inspection (TÜV): 05/2027, color: white, gearing type: automatic, emission class: euro6, Equipment: ABS, air conditioning, * Sun visor
* ABS
* ASR
* Radio
* On-board computer
* Cruise control
* Hill-start assist
* Electric windows
* Electrically adjustable mirrors
* Mirror heating
* Central locking
* Fog lights
* Sunroof
* Rear window
* Driver comfort seat
Lodpfx As Alcz Aol Ieai
* Seat heating
* Differential lock, rear axle
* Trailer coupling
* 2-line air connection
* Cornering light
* Off-road driving program
* AP axles
* Air horns
* Turning assistant, right
* Duomatik air connection
* 8-speed
* Suspension: leaf spring
* Payload: 8420
* Continuous brake: High Performance Engine Brake
----Superstructure: Hiab Multilift Futura FTR 12, telescopic, container stop at the front with fixed stop level, 5 selectable locking positions, SafetyPlus hydraulic container locking on the side + hydraulic container locking at the rear, Flex Control control system with external and remote control, including loading function bracket on the dashboard, 12,000 kg lifting capacity, 3-fold tilting hook, Turbo gear for quick release of empty containers, safety package consisting of Flex Control/emergency stop with memory, side access ladder, handle, mirror, U-guard. The superstructure was delivered from the factory with an additional zinc primer on the main frame----Windshield tinted
Sale only to commercial customers. IN CASE OF EXPORT, ONLY THE NET PRICE IS TO BE PAID!!!!! ALL INFORMATION WITHOUT GUARANTEE, INCLUDING EQUIPMENT + ACCESSORIES. Our general terms and conditions (see imprint) form the basis of all purchase contracts, invoices, pro forma invoices, orders, and sales negotiations.
Success:
Your message has been sent.
Listing
Bovenden
1,244 km
Roll-off container
Abrollcontainer City L39/C ca. 13,5cbm
Call
Condition: used, Year of construction: 2020, color: grey, overall weight: 10,000 kg, maximum load weight: 8,680 kg, empty load weight: 1,320 kg, loading space volume: 14 m³, loading space width: 2,150 mm, loading space length: 4,900 mm, loading space height: 1,250 mm, mileage: 1,001 km, first registration: 01/2020, gearing type: other, driver cabin: other, Vehicle location: Bovenden, steel body, doors
Body: City roll-off container, approx. 13.5 cubic meters, with double doors, CITY STANDARD CONTAINER TYPE L 39/C
Dimensions: 5,000 x 2,150 x 1,250 mm
Capacity: 13.5 cubic meters, city hook lift
Hook lift height: 900 mm, locking height: 2,385 mm
Floor/sides: 3 mm, outer rollers
SQUARE FLOOR PAN
Double-wing door with central locking. Floor spar: 750 mm
Side wall spar distance: 1500 mm
DESCALED (SANDBLASTED)
Ledpfez Nqquox Al Isai
SIDE WALL SPARS COMPLETELY WELDED
Primed/painted RAL 7012
basalt gray – SILK MATT, zinc phosphate-containing primer plus
weather-resistant synthetic resin paint
interior only primed. ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to changes, prior sale, and errors!
Success:
Your message has been sent.
Listing
Wiefelstede
1,085 km
Wedge bar chuck
unbekannt220 mm
Call
Condition: good (used), Wedge bar chuck, power chuck, three-jaw chuck, three-jaw lathe chuck
-Hole size: Ø 216 mm
-Recess recording: mm
-Bolt circle: mm
-Through hole: 50 mm
Lodpjdqck Hefx Al Ijai
-Soft interchangeable jaws
-Dimensions: Ø 216/H75 mm
-Weight: 18.7 kg
Success:
Your message has been sent.
Listing
Stäbelow
1,333 km
High top van
IVECODaily 35S12 A8V Maxi KaWa 1.Hand 71Tkm
Call
Condition: used, mileage: 71,299 km, power: 85 kW (115.57 HP), first registration: 09/2020, fuel type: diesel, overall weight: 3,500 kg, color: white, gearing type: automatic, emission class: euro6, number of seats: 2, total length: 7,274 mm, total width: 2,052 mm, total height: 2,660 mm, loading space length: 4,680 mm, loading space width: 1,800 mm, loading space height: 1,900 mm, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), parking heater, soot filter, Iveco Daily 35S12 EA8V HIMATIC High-Roof Maxi Van, 1st Owner, 71,000 km, Iveco Service Booklet available (2 copies)!
MODIFICATION: DRIVER'S SEAT UPGRADED TO A COMFORT SEAT WITH SEAT HEATING
INSTALLATION: DRIVER'S SEAT SLIDE RAIL EXTENSION
Lasdpfx Alj Abvzuo Iji
WHEELBASE 4100 mm
WEDGE-SHAPED LEVELING BLOCKS, 2 pieces
00614 PASSENGER SEAT, STANDARD
02181 EXHAUST PIPE, CENTER-MOUNTED
02215 WITHOUT WARNING TRIANGLE
04353 WITHOUT REAR WALL INSULATION
05108 HAZARD WARNING LIGHTS
05596 0. FIRST-AID KIT
06654 AUXILIARY HEATER FOR HOT WATER
O. MUD FLAPS, WHEEL BEARINGS
06767 REAR DOORS, 270° OPENING
07196 A/C COMPRESSOR, 170CCM
08623 PARABOLIC SPRINGS
72619 STEERING COLUMN, 2-WAY ADJUSTABLE
73182 WITHOUT SIDE MARKERS
75223 SWITCH FOR BODY LIGHTING
75967 MARKET-SPECIFIC SIGN
76104 MANUAL AIR CONDITIONING SYSTEM
76133 WITHOUT MAINTENANCE INDICATOR
ARMREST, STANDARD
DIGITAL RADIO, DAB
CENTRAL STORAGE COMPARTMENT + USB
481678, manufactured on 21.0.2020
SEAT COVERS FOR DRIVER AND PASSENGER
RUBBER FLOOR MAT, DRIVER'S CABIN
INSTALLATION: REARVIEW CAMERA WITH MONITOR
PARTICULATE MATTER STICKER (GREEN)
SORTIMO FIT-OUT
INSTALLATION: RIPPED METAL SHEET ON PARTITION WALL
GRAB HANDLE ON A-PILLAR
etc.
Appointments and test drives by telephone appointment only
The information provided online is a non-binding description and does not constitute guaranteed characteristics. The seller is not liable for typographical and data transmission errors. Errors and prior sale are subject to change.
Success:
Your message has been sent.
Listing
Bovenden
1,244 km
Roll-off container
Abrollcontainer City K09/C-ALU ca. 6,6cbm
Call
Condition: used, Year of construction: 2022, color: grey, overall weight: 10,000 kg, maximum load weight: 9,120 kg, empty load weight: 880 kg, loading space volume: 7 m³, loading space width: 2,200 mm, loading space length: 5,000 mm, loading space height: 550 mm, mileage: 1,001 km, first registration: 01/2022, gearing type: other, driver cabin: other, Vehicle location: Bovenden, lashing eyes, swing-out flaps
Body: City skip loader, approx. 6.6 cubic meters, with foldable aluminum side walls, CITY TIPPER BODY TYPE K 08/C-ALU
Dimensions: 5,000 x 2,200 x 600 mm
Capacity: 6.6 cubic meters, floor 3 mm S235JR
Front wall 1,000 mm high, made of 3 mm S235JR steel sheet
Lateral edging as a lashing profile, to be lashed every 100 mm.
CITY HOOK SYSTEM
Hook height 900 mm
Locking dimension 2,385 mm
External rollers
Hydraulic internal locking
Side walls, aluminum profile, 25 mm
Center rail removable
Corner rails removable
Side walls foldable and removable.
Rear wall, aluminum profile, foldable and removable. Aluminum parts anodized, natural finish!
Plan hooks around the perimeter, under the floor
Primed/painted RAL 7012 basalt gray - 2-component paint -
Zinc phosphate-containing primer plus 2-component PUR paint -
Load capacity of City container
City tipper body, max. 10,000 kg
ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to changes, interim sales, and errors!
Ljdjz Nqqnopfx Al Ijai
Success:
Your message has been sent.
Listing
Wiefelstede
1,085 km
Steel holder wedge holder
unbekannt50 - 60 x 23 x 100 mm
Call
Condition: good (used), Steel holder, clamping plate with T-slot, wedge holder
-Steel holder: wedge holder
-Shot size: 50 - 60 x 23 x 100 mm
Ledowcxfqopfx Al Ieai
-Dimensions: 175/165/H215 mm
-Weight: 12.3 kg
Success:
Your message has been sent.
Listing
Niederlangen
1,037 km
Hydr. pressbrake
ERMAKSPEED BEND PRO 1270x60
Call
Condition: used, Year of construction: 2019, pressure 60.0 t
chamfer lenght 1270 mm
distance between columns 1000 mm
column arm 410 mm
ram stroke speed 160 mm/sec
work speed 10.0 mm/sec
return speed 165 mm/sec
work stroke 275 mm
dayligth 530 mm
table height 900 mm
table width 90.0 mm
back stop - adjustable 500 mm
control DA 66T
oil volume 150 ltr.
voltage 380 V
engine output 7.5 kW
Weight 4320 kg
range L-W-H 2250 x 1960 x 2750 mm
current new price approx. 65.000 euros
very rarely used!
Special price on request
- in checked condition - machine video -
?v=KRifrqTgkVU
-----
SPEED BEND PRO CNC press brake:
* increased installation height
* increased cylinder stroke
* and increased bending beam speeds
-----
Equipment:
- CNC electro-hydraulic press brake
Laodpjzlulpofx Al Ioi
- DELEM CNC control model "DA-66T" graphics/touchscreen
* 2D graphic touchscreen programming mode
* 3D representation in simulation and production
* 17" color TFT screen with high resolution
* Bending sequence calculation
* Product programming and representation in actual size
* USB interface
- CNC controlled axes: Y1 - Y2 - X - R
- CNC electro-motorized back stop (X axis)
* on ball screws
* Travel path .. 500 mm
* Travel speed .. 500 mm/s
* with 2x manually adjustable stop fingers
- CNC electro-motor height adjustment (R axis)
* Travel path .. 250 mm
* Travel speed .. 350 mm/s
- AMADA/PROMECAM upper tool holder
* including clamping jaws with upper wedge camber
* 1x ROLLERI split set 60° upper tool
- AMADA/PROMECAM lower tool holder
* including 1x die shoe "C 1050-R"
* 1x AMADA 1-V die 85°
- Safety device at the rear (door including safety switch)
- BOSCH/HOERBIGER hydraulic components
- SIEMENS electrical components
- FIESSLER AKAS laser protection device in front of the machine
- 2x front support arms with SLIDING system (HIWIN plain bearings)
- 1x freely movable double foot control
- CE mark / Declaration of conformity
- Operating instructions including circuit and hydraulic diagram
Success:
Your message has been sent.
Listing
Wiefelstede
1,085 km
Wedge bar chuck 165 mm
KlopferMB-P-2005
Call
Condition: good (used), Wedge bar chucks, three-jaw chucks, three-jaw lathe chucks, power chucks
-Chuck size: Ø 165 mm
-Rezess recording: Ø 125 mm
-Hole circle: 140 mm (3x M10)
Lasdpfx Ajb A R Tnol Iji
-Inner diameter: 40 mm
-Speed: max. 4000 rpm
-Weight: 12 kg
Success:
Your message has been sent.
Listing
Essen
1,052 km
Working platform semitrailer
FAYMONVILLEMAX Trailer MAX410 Ballastauflieger
Call
Condition: used, maximum load weight: 44,420 kg, overall weight: 53,000 kg, axle configuration: 3 axles, first registration: 04/2025, next inspection (TÜV): 08/2027, Equipment: ABS, You can find our complete vehicle inventory with immediately and shortly available vehicles on our website.
Excerpt from the equipment:
Complete equipment upon request.
Loading platform:
* with approximately 30 mm thick hardwood flooring
* 9 pairs of lashing rings that can be folded outwards (LC 10,000 daN)
* 10 pairs of pole pockets in the outer frame of the loading platform for plug-in poles, approximately 100 x 50 mm
Fifth wheel:
* Hydraulic fifth wheel
Tires:
* 385/65 R 22.5 - MICHELIN MULTI High Load 164K
* TPMS: TPMS tire pressure monitoring system according to ECE R 141
* Data transmission to the tractor unit is carried out via the standardized EBS interface according to ISO 11992
* For correct display, the tractor unit must be able to transmit and display this data.
Axles and suspension:
* BPW axles, technically 10,000 kg each
* first axle hydro-mechanically steered
* second axle fixed and third axle hydro-mechanically steered
* mounted on a turntable
* Air-suspended with lifting and lowering valve
Braking system:
* WABCO braking system according to EU regulations with EBS-E (4S3M) without connecting lines to the tractor unit
Electrical system:
* according to EU regulations
* Lighting 24 Volt ASPÖCK-NORDIK (ASS3)
* ASPÖCK-UNIBOX on the connection bar at the front with sockets 24N, 24S & 15 pole connection according to ISO. 24N ISO-1185 24S ISO-3731
* 15 pole ISO-12098
Steel construction:
* made of high-strength fine-grained steels
* Steel grades: S355J2+N/S355MC (yield strength 355 MPa)
* S690QL/S700MC (yield strength 690 MPa)
Painting:
* Complete steel construction blasted automatically with a shot blasting system after welding
* Second blasting with corundum for optimal adhesion of the coating system
* HRM metallization of the entire vehicle chassis with ZINACOR 850 (85% zinc/15% aluminum) to ensure the best corrosion protection
* Final coating with 2 layers of 2K topcoat, solid color in RAL 9005 deep black according to the RAL 841GL system
* Rear part metallized and painted in RAL 9010 (pure white)
* Rims in silver-grey, paintwork tested in the salt spray test according to ISO 9227-NSS
* Sealing of cavities with special wax
Included accessories:
* Loading platform with approximately 30 mm thick hardwood flooring
* 2 inch king pin, one galvanized steel front wall (EN12642-XL), approximately 1,200 mm high
* On the galvanized connection bar at the front, DUOMATIK air couplings
* Storage for approximately 1,000 mm plug-in poles, at the rear in the center beam
* On the swan neck and at the rear panel, left and right, one bracket each for the warning signs including socket
* White reflector tape according to EU regulations, red on the side and at the rear
* 10 pairs of pole pockets for plug-in poles, approximately 100 x 50 mm, in the outer frame of the loading platform
* European reflector signs (red-yellow) at the rear of the trailer
* One bracket for a rotating beacon at the rear of the trailer
* One mud flap at the rear of the trailer, manual and description on a USB stick
* Central lubrication system BEKAMAX (Pico) with normal grease NLGI-2 and removable protective cover around the pump
* 4 pieces of chocks with holder on the front wall, rear steering from front and rear by means of a cable remote control with push buttons
Lajdpfx Aj Aauphol Isi
* with single-axle control (without installation in the tractor unit)
* Electro-hydraulic unit, 6 pairs of galvanized plug-in poles, approximately 100 x 50 mm, approximately 1,000 mm high
* 5 pairs o
Success:
Your message has been sent.
Listing
Wietmarschen
1,040 km
Modular shelf
ca. 30,06 lfm. Fachbodenregale META ClipH: 250 cm , T: 40 cm , 100 kg pro Ebene
Call
Condition: used, This used META shelving unit is a compact and flexible storage solution for workshops, warehouses, archives, and businesses. With a height of 250 cm, a depth of 40 cm, and a total of 6 storage levels, the shelving unit offers ample space for the organized storage of boxes, containers, spare parts, and other storage items. The modular shelving system can be used in a variety of ways and enables efficient use of the available storage space.
30.06 linear meters of shelving, 40 cm deep, used, workshop shelving, warehouse shelving, manual storage, plug-in shelving, small parts storage.
Data:
- Height: approx. 250 cm
- Depth: approx. 40 cm
- Length: approx. 30.06 linear meters
Shelving offer of 30.06 linear meters consisting of:
Lode Aktbmepfx Al Ioai
- 031 x uprights approx. 200 x 40 cm, pre-assembled
- 180 x shelves approx. 100 x 40 cm
- 720 x shelf supports
- 030 x cross braces
- Manufacturer: META CLIP
- Load capacity: 100 kg per shelf, with evenly distributed load
- Levels: 6 x storage levels
- Surface: Sendzimir zinc-plated
- Used, available from stock
-- IMMEDIATELY AVAILABLE IN MULTIPLE UNITS --
Price:
€2179.00 net
plus applicable VAT
You will receive an invoice with VAT shown.
Transport:
Delivery can be arranged through our partner shipping company upon request; the costs depend on the postal code.
Assembly:
Our trained staff will be happy to assist you with the professional assembly and disassembly of your business equipment, if required.
Our recommendation:
Please let us know your requirements…
We will be happy to help you with the implementation of your projects, from planning and ordering to assembly.
Are you interested or have any questions?
Simply contact us via message or phone call. Our phone number can be found on our company page. ☎️
You can reach us by phone from Monday to Friday, 08:00 - 15:00.
Alternatively, you can send us a message with your name and number, and we will get back to you as soon as possible.
Trust Seal
Dealers certified through Machineseeker

Success:
Your message has been sent.
Listing
Legden
1,028 km
Low loader semitrailer
FAYMONVILLEMegamax 3.Achs-Tieflader/Funk/Hydraulik/24.14m
Call
Condition: used, maximum load weight: 47,500 kg, overall weight: 57,000 kg, axle configuration: 3 axles, first registration: 11/2016, total length: 15,840 mm, total width: 2,750 mm, total height: 2,400 mm, Equipment: ABS, * Own hydraulic unit
* Gooseneck with sideboards
Lajdpfs Ah Azmex Al Isi
* Hydraulically steered axles
* Split axles
* Extendable to a total length of up to 24,140 mm
* Load area widening to a total width of up to 3200 mm
* Height-adjustable low-bed
* Radio system
* Wabco Trailer EBS-E Remorque
* Drum brake
* Support wedges
* Spare wheels
----* Tire size: 245/70R17.5
* Technically permissible total weight: 66,000 kg
* Tare weight: 7,700 kg
* Total length: 15,840 - 24,140 mm
* Inspection due: /
----Vehicle number/Vehicle: 12527----Errors and prior sale excepted----Advertisements and various markings have been digitally removed.-----We will be happy to assist you with all formalities involved in purchasing a vehicle. Simply let us know your wishes and suggestions, and we will take care of them. Among other things, we can offer you the following services for an additional charge:----Trade-in of your old vehicle, TÜV/inspection approval, complete export processing, arrangement of financing, application for export license plates, vehicle transport, vehicle registration, recovery and vehicle transport.
----?YOUR VTS TEAM
Success:
Your message has been sent.
Listing
Germany
1,192 km
Romi C 510
RomiC 510
Call
Condition: ready for operation (used), Year of construction: 2014, operating hours: 2,041 h, spindle speed (max.): 2,800 rpm, controller manufacturer: SIEMENS, controller model: SIEMENS 828D, number of axes: 2, This Romi C 510 was manufactured in 2014. It has a hollow spindle with a Ø 65 mm spindle passage, a wedge bar manual chuck Ø 260 mm, and hardened guide surfaces. The tool holder is a Multifix steel holder head B K22. The machine operates at a standard spindle speed range of 56–2800 rpm and has automatic lubrication and cycle functions for efficient operation. If you are looking for a high-quality lathe, consider the Romi C 510 that we have for sale. Contact us for more information.
Additional equipment
• Console: Automatic cycle in the longitudinal direction with activation of console recess.
Machine Benefits
Technical Machine Benefits
• Automatic features: tool clamping, hardening of guide surfaces, switching of milling spindle speed, frame cycles, and lubrication of guide surfaces.
• Special versions: fully equipped, manual speed control, reduced speed range, manual tightening, numeric indicator for foreign production, and climate-controlled version without a control system.
• Guide surfaces: hardened and plated counter surfaces.
• Climbing milling: automatic device included.
• Automatic tool clamping
Lasdpfx Ajx D I Iusl Iji
Extra Information
Special Machine Versions: Raised milling headstock, automatic frame cycles, and compliance with foreign standards by agreement.Maschinenbeschreibung:CNC-Horizontal-Drehmaschine - ROMI C 510 V5.0 – SIEMENSStandardausführung:. Siemens-Steuerung 828D sl, mit 10,4” LCD-Farbmonitor. ASA A2-6" Spindelkopf, Drehmoment: max. 303 Nm bzw. ASA A2-8", max. Drehmoment 408Nm, mit 520mm Schwingdurchmesserüber Bett, 450 mm Schwingdurchmesser über Schlittenführung und 255mm Schwingdurchmesser über Planschlitten. Reitstock mit manueller Positionierung des Grundkörpers, mit manueller Betätigung der Pinole (stehende Zentrierspitze) MK-4. Eilgang längs/quer mit 10.000mm/min. Herausziehbarer Spänewanne. Elektroanlage lieferbar für folgende Spannungen/Frequenzen: 400VCA / 50-60Hz. Abgedichtete Arbeitsraumleuchte. ROMI RMMP manuelles Maschinenpaket, bestehend aus CNC gesteuertem Hauptschlitten mit zwei elektronischen Handrädern für X- und Z-Achse, Joystick-Schaltern und der bedienerfreundlichen Siemens Software "Manual Machine Plus". Adapterplatte Multifix K22 Type B mit Multifix Stahlhalterkopf B K22. Schleppeinrichtung für Reitstock. Automatische Schmierung mit Inline-Filter und Füllstandsensor. Kühlsystem, komplett mit Kühlmittelbehälter und Kühlmittelpumpe (10l/min,@7bar, 1,5kw/ 2cv). Kühlwasser Spritzpistole mit zusätzlicher Pumpe. Elektrischer Schaltschrank mit Kühlung über Zentrifugalgebläse und Überdruck. Spritzschutz, komplett, Schutztüre mit Sicherheitsfenster und Verriegelung durch elektrische Sicherheitsschalter. Schrauben und Muttern für Nivellierung. Schraubwerkzeugsatz für den Betrieb der Anlage. Vollständige Dokumentation für das ROMI-Produkt auf CD. Standardlackierung: Epoxidlack strukturiert Munsell-Blau 10B-3/4 und Epoxidlack strukturiert grau RAL 7035.
Success:
Your message has been sent.
Listing
Heidelberg
1,255 km
Public utility vehicle
REFORMBoki 1352 T
Call
Condition: excellent (used), functionality: fully functional, power: 110.32 kW (149.99 HP), fuel type: diesel, Year of construction: 2021, operating hours: 172 h, Equipment: air conditioning, all wheel drive, car registration, hydraulics, trailer coupling, BOKI MUNICIPAL VEHICLE 1352T
Length x Width x Height – 5070 x 1700 x 2190 mm (excluding mirrors)
Wheelbase 2400 mm / 990 mm
Tank capacity: Diesel 50 liters, AdBlue 25 liters, Hydraulic oil 50 liters
Additional equipment affects unladen weight, payload and dimensions
Engine FPT F1C 1152, EU 6C, 110kW (standard)
FPT, Type F1C, 2998 cm³, 4-cylinder diesel
110 kW / 150 hp at 3500 rpm.
Torque: 320 Nm at 1200 rpm.
Emission standard Euro 6C (Stage V in vehicle documents)
Permissible total weight 7490 kg
Drive system (standard)
Hydrostatic drive, ECO-Drive speed optimization
Permanent all-wheel drive with self-locking differential
High-pressure hydrostatic system (400 bar), max. output torque 500 Nm
Steering (standard)
Mechanically steered front axle with up to 40° steering angle
Left-hand drive
Power steering with hydraulic assistance
3rd axle forced steering and liftable
Suspension (standard)
Parabolic leaf springs with stabilizer
Brakes (standard) ABS
6-wheel disc brakes with brake booster and spring-loaded parking brake
Incl. 4-channel ABS braking system with anti-slip control
Parking brake with optical and acoustic warning
Tires 285/65 R16 (standard)
Boki equipped with 285/65 R16C tires
Frame (standard)
Ledpfx Alezf Etwo Ijai
With ball coupling system Ø 42 mm,
for mounting tipper bodies and other superstructures
Paintwork (standard)
Cab + engine box: deep orange RAL 2011
Chassis: anthracite gray RAL 7016
Underbody protection Dinitrol (standard)
Corrosion protection chassis Dinitrol 4010
Temperature resistant up to 210°
resistant to alkaline and acidic influences
can be washed off with special cleaner
Hydraulic oil HVLPD 46 (standard)
Filled with HVLPD 46
Service interval approx. 2000 hours
Including the following winter equipment:
Kugelmann spreader Duplex 2.5 m³ stainless steel
Type SD B180 H80 L270 KH KA VA
Stainless steel design (container and sheet metal parts made of stainless steel, glass bead blasted and painted with special paint) color RAL 2011
Dimensions:
Hopper width (B): 1800mm
Hopper height (H): 800mm
Hopper length (L): 2700m
Rear overhang (X): 50mm
Discharge type: short
Control k-tronic 2
Fixed cable harness
Terminal box for cable separation
Mounting kit Universal, spider
for spreading width B105 - B120
Subframe for mounting on the tipper spider, mounted on the spreader
Special paint of the spreader RAL 5002 Ultramarine Blue
Access ladder A Duplex stainless steel
Foldable with quick-release fastener
Platform slip-resistant with handrail, suitable for Duplex spreader
Electric spreading pattern adjustment (ESB) from the driver's cab
Electric spreading pattern adjustment Standard (ESB) complete
Electric servo - adjustment motor to move the spreading pattern position
Display and adjustment of the spreading pattern position by means of control panel
Hummel Vario - snow plow
LF - D 2700mm
With support foot, 2 double-acting hydraulic cylinders, 6 hydraulic hoses
with couplings and horizontal adjustment
Complete with hydraulic lifting and lowering device including
Hydraulic cylinder, hoses, couplings and device-side mounting plate
(DIN plate)
Can be used in a variety of ways as:
- side plow (diagonal plow)
- wedge-shaped plow
- V-shaped plow
Paintwork:
RAL 5002 Blue
Height: approx. 900mm
Weight: approx. 500Kg
Total width: approx. 2700mm
Snow plow - additional lighting
consisting of 2 elastically mounted marker lights, holder, cable, plug
Rubber - corundum strip 2700mm
Changes, typing errors, errors and prior sale are subject to chan
Success:
Your message has been sent.
Listing
Grońsko
1,632 km
Surface planer
SCM
Call
Condition: used, SCM jointer, Italian made
4 traditional knives, wedge-clamped
Table combs
Lajdpfxoy Ifglo Al Isi
Width: 410 mm
Table length: 2600 mm
Angled, adjustable fence
Brake
Well-maintained machine, quiet operation
We make it easier for you to find: "wedge zinc"
You will receive new offers immediately and free of charge via e-mail
You can easily terminate the search request at any time
Used Wedge Zinc (704)
Search Machineseeker now with more than 200,000 used machines:Browse through the most popular machine descriptions:
This may be of interest to you

Get information now
+44 20 806 810 84
+44 20 806 810 84
List now
*per listing / month

























































































































































































































































































