Used Wedge for sale (431)

Condition: used, Year of construction: 2009, operating hours: 6,787 h, Equipment: all wheel drive, Crushing plant with transport chassis approved for road traffic ----Feed hopper & pre-screening: Hydraulically folding hopper: A 6.5 m³ feed hopper with lockable rear and side walls. The hopper walls can be quickly lowered for transport. * Vibratory feeder (vibrating trough): A robust heavy-duty trough ensures uniform material feed into the crusher. Kjds Aa Hr Uepfx Aamenc * Grizzly pre-screen: An integrated screen separates fine particles and sand before the crushing chamber, minimizing wear on the crushing jaws and increasing throughput. ----Crushing unit: High-performance jaw crusher: A generous inlet opening of 1,200 x 750 mm. * Hydraulic drive: The crusher is hydraulically driven, allowing for trouble-free starting under load and a reverse crushing function to clear blockages in a material-friendly manner. * Wedge gap adjustment: The stepless hydraulic adjustment of the CSS (closed-side setting) allows for quick adaptation to the desired final grain size. ----Conveyor systems & material separation: Main discharge belt: An extra-long, 1,000 mm wide conveyor belt with a high discharge height. It can be hydraulically lowered for maintenance or transport. * Side discharge belt (bypass): A folding conveyor belt transports the pre-screened fine material (e.g. soil/sand) to the side. * Overband magnet: A powerful permanent magnet above the main belt automatically removes reinforcing steel, bolts and metals from the crushed construction debris. ----Drive & control: Diesel engine: A Caterpillar C-9 diesel engine with 261 kW (355 hp) provides the hydraulic main drive. * Central control panel: Monitors all important machine parameters (oil pressure, engine temperature, belt speeds) and enables control of the core functions. * Remote control: Allows the excavator or wheel loader operator to control the plant directly from the cab (e.g. start/stop the vibratory feeder). ----Maintenance & mobility: SKF central lubrication system: Automatically lubricates the main bearings of the crusher during operation, drastically reducing manual maintenance effort. * Track chassis: A stable chain chassis ensures excellent off-road capability directly at the job site. * Maintenance platforms: All-round walkways with handrails guarantee safe access to the engine and crusher. ----* Crushing chamber (inlet): 1,200 x 750 mm * Engine: Mostly Caterpillar diesel engine (CAT C-9) ----Transport dimensions: * Length: approx. 14.6 m * Width: approx. 2.8 m * Height: approx. 3.3 m ----Equipment: * Vibratory feeder with grizzly screen * Overband magnet for the separation of reinforcing steel (construction debris) * generous maintenance platforms and folding hopper corners. * 3-axle transport chassis -----Vehicle number 12571 ----Errors and prior sale excepted

Condition: excellent (used), Year of construction: 2013, operating hours: 11,556 h, functionality: fully functional, type of cooling: water, laser power: 500 W, laser wavelength: 1,064 nm, Equipment: documentation/manual, type plate available, LASER welding unit - AL 500 CWS Average power 500 W Emergency stop switch on the resonator CWS laser power supply Pulse peak power 17 kW Pulse frequency 0-100 Hz Incl. deflection flange 3 x 400 V, 50-60 Hz, 3 x 32 A ALFlak motion system Travel range (X, Y, Z) 340 × 330 × 370 mm Kedpfsz Eu Syex Aamenc Equipment: Ergokeil 5°-25° Ergonomic wedge for microscope Tilting/swiveling optics AL500 LED-UW HP Focusing objective f=120, ultra-white diode ring light Protective glass swivel joint ALFlak X, Y and Z can be locked independently Eyepiece 16x magnification Rotating axis module ALFlak with chuck ø 125 mm / internal ø 24 mm Tiltable for horizontal to vertical rotation.

Condition: excellent (used), Guide plates 1250 mm long x 460 mm high, strong steel base frame with 2 guide shafts and 4 adjustment spindles each, can be mounted behind any type of gang saw, also 2 robust, toothed pressure roller devices with 4 ball bearings each to complement it Kodpfeui Ifcsx Aamjnc

Year of construction: 2019, condition: used, Operational machine. Ask for additional information. Ksdpfx Ajy R U H Hsamenc Second unit as well, vintage 2021.

Condition: like new (used), Year of construction: 2024, operating hours: 10 h, functionality: fully functional, Description Solid/liquid separation unit based on a centrifugal sifter (Centri-Sifter): solids are conveyed along the basket/screen by a paddle, while the liquid is separated and discharged through a dedicated outlet. Adjustable inclination to optimize residence time and separation efficiency. Sold with a 1000 L hopper and a flexible screw conveyor. In like-new condition (used only for testing), fully functional, and available immediately. Main equipment – Centri-Sifter • Type: centrifugal sifter (liquid outlet + solid outlet) • Construction: 304 stainless steel • Basket/screen: wedge wire basket (304 stainless steel) • Paddle: “expanded 7.5°” (304 stainless steel) • Safety: inspection door with interlock (operator safety) • Weight (machine): ≈ 220 kg • Purge air/gas (seals): clean/dry/filtered air/gas required Motor (motor plate) • Motor 3~: 2.2 kW, 50 Hz, 230 V Δ / 400 V Y • Speed: 1450 rpm (50 Hz) • Protection / efficiency: IP55, IE3 • Mounting: IM B35, service S1 Included equipment (sold with) 1) Hopper • Volume: 1000 L • 304 stainless steel, open design, “food grade” finish (Type C Plus) • Level probes: high + low • 30° outlet 2) Flexible screw conveyor Kjdpfjzc H H Iex Aamsnc • Supplier: Spiroflow Ltd • Model: 146SH • Length / inclination: 3 m 30° • Outlet: Ø300, 30° standard • Components: reverse bung / drop trap / QR flanges (quick disassembly) Price and conditions • Availability: immediate • Location: Martigny (Switzerland) • Condition: like new, functional • Visit / inspection: upon request Transportation costs are the responsibility of the buyer.

Condition: used, empty load weight: 4,400 kg, maximum load weight: 13,600 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 02/2017, next inspection (TÜV): 07/2027, loading space length: 6,300 mm, loading space width: 2,480 mm, loading space height: 960 mm, loading space volume: 14 m³, total length: 6,300 mm, suspension: air, tire size: 385/65 22,5, color: yellow, Year of construction: 2017, front tire size: 385/65 22,5, rear tire size: 385/65 22,5, driver cabin: day cab, emission class: none, Equipment: ABS, truck registration, Vehicle number for inquiries: 41795 Ackermann, 2-axle construction material trailer. * Year of manufacture: 2017 * ABS, Anti-lock Braking System * EBS, electronic brake system * Air suspension * Air coupling Duomatik * 15-pin connector * Wedge pocket covers with wedge pockets * Inspections: MOT / Emissions test valid until 07.2027 * Suspension: Air * Total weight: 18,000 kg * Tare weight: 4,400 kg * Payload: 13,600 kg * Permissible total weight: 18,000 kg * Tire condition 1st axle: -- - Tire size: 385/65 R22.5 * Tire condition 2nd axle: -- - Tire size: 385/65 R22.5 * Tire condition spare tire: 50% * Tire sizes: 385/65 R22.5 * Internal dimensions: L=6300 mm, W=2480 mm, H=960 mm * Internal volume: 15 m³ * Pallet spaces: 15 * Manufacturer: Fellechner Disclaimer: Subject to changes, prior sales, and errors. You can find more pictures and videos on our website. Our extensive service includes, for example: * Purchase / sale / rental of commercial vehicles * Fast and straightforward financing * Application for all (export) documents * Ordering export license plates / customs license plates * Vehicle preparation: new tarpaulins, lettering, painting, etc. * Professional loading / load securing * TÜV inspections, registration service * Transfer of commercial vehicles Please contact our trained staff; we will be happy to advise you. Knedpfx Aaj Aa Ifismoc

Condition: good (used), splitting wedge, separating wedge, pressing pliers, hydraulic crimping pliers -Separating wedge: Split wedge, hydraulic -Intermediate dimension: 67 mm -Insertion width: 70 mm Ksdpfx Ajvvafyjamonc -Number: 2x wedge tool available -Price: per piece -Dimensions: 410/130/H62 mm -Weight: 6.5 kg/piece

Year of construction: 1974, condition: used, functionality: unexamined, For sale: - Circular saw mill, type OS65, from a carpentry/lumber mill in very good condition. - Low operating hours, only approx. 800-1000 m³/year. - Clamping carriage, self-propelled. - Auxiliary carriage. - Approx. 15m of guide rails for the clamping carriage/auxiliary carriage. - Splitting wedge/outfeed rollers, not driven. - €20,000 net / plus VAT. The following are also available separately: - Log infeed system Knedpfx Aaoz Dn Ulsmec - Chain hoist with transverse conveyor Prior inspection is required.

Condition: repair required (used), Year of construction: 1987, machine/vehicle number: 90071000, bale width: 300 mm, bale height: 300 mm, overall weight: 15,000 kg, Currently, the “lateral pressure” is stuck because material (sheet metal) has shifted and become wedged under the side block. Kedjy Tlzaepfx Aamenc

Condition: used, 4m Length, 670 working height, 850 minimum stroke. 8 x Cramping bars at 500mm centres Kjdpfoymm Sfsx Aamonc 3 x Hyrdaulic cylinders via motorised pump with starter Suitable for open plan and wedged stairs

Condition: used, 5 sets of soft top jaws, fixed jaws, RÖHM type: Duro 160/3 Suitable for 3-jaw chucks with a wedge-type shank Chuck diameter: 160 / 180 mm Identification No.: 94008 Jaw length: 86 mm Jaw width: 20 mm Kjdpfx Aez Rnb Teamsnc Overall height without bridge: 36 mm Overall height with bridge: 41 mm Groove width: 8 mm Bridge width: 18 mm Hole spacing: 32 mm Bore size: Ø 9 mm (for M8 screws) - 5 sets of steel top jaws - Used jaw sets, varying degrees of wear Dimensions of base jaw L x W x H: approx. 86 x 20 x 41 mm Weight: approx. 5.5 kg Several sets of top jaws available Top jaws suitable for RÖHM, FORKARDT, SCHUNK, or SMW

Condition: excellent (used), Year of construction: 1997, functionality: fully functional, power: 15 kW (20.39 HP), total height: 2,300 mm, total length: 1,500 mm, total width: 900 mm, overall weight: 1,500 kg, table height: 955 mm, Equipment: CE marking, documentation/manual, motor brake, Vertical band saw / resaw Manufacturer: Stenner Type: ST 9 Knjdpfjz Eigfsx Aamjc Heavy-duty vertical band saw for resawing and trimming of squared timber, planks, and boards Typical applications: sawmill, timber trade, carpentry, pallet manufacturing, planing mill Saw blade and rollers: Diameter of saw blade rollers: 915 mm Saw blade width: 100 mm Minimum saw blade length: 5280 mm Maximum saw blade length: 5380 mm Cutting performance: Maximum wood width: 370 mm Maximum cutting width (standard): 230 mm Maximum distance from saw line to fence: 305 mm Fence swivels 0 – 35° Drive and feed: Motor: 15 kW (optional equipment) Feed rate: variable, 7.5 – 30 m/min Dust extraction: Dust extraction port diameter: 150 mm Extraction volume: 1455 m³/h Dimensions and weight: Working height: 955 mm Dimensions (approx.): 1500 x 900 x 2300 mm (L x W x H) Machine weight (approx.): 1500 kg Basic concept: - Vertical band saw for resawing and trimming of solid wood - Fence swivels 0 – 35° for bevel and wedge cuts - Feed rate can be adjusted variably from 7.5 to 30 m/min - Saw blade rollers 915 mm, saw blade width up to 100 mm - Wood type: softwood / hardwood

Condition: used, Slicer, Wedging, Coring & Stick Cutting Machine PND SS8 The PND SS8 is a professional fruit and vegetable cutting machine designed for the efficient processing of fresh produce. This versatile fruit processing machine is suitable for cutting, segmenting, and coring a wide range of products, including apples, pears, mangoes, kiwis, citrus fruits, pineapples, tomatoes, potatoes, cucumbers, and peppers. Thanks to its interchangeable knives, the machine produces precise slices, wedges, sticks, and segments with consistent quality. The PND SS8 offers a capacity of up to approximately 50 fruits per minute, making it ideal for fresh-cut companies, fresh produce processors, and the food industry. The robust stainless steel construction meets the highest hygiene standards and is easy to clean. Product-contact parts can be quickly removed, significantly reducing cleaning and maintenance time. The compact machine can be easily integrated into an existing production line. Its precise cutting technology minimizes product waste while maintaining optimal quality of the finished product. The PND SS8 is suitable for both small and large production volumes and provides a reliable solution for efficient fruit and vegetable processing. If you are looking for an industrial fruit cutting machine, apple cutting machine, mango coring machine, vegetable cutting machine, fresh produce processing machine, or fresh-cut machine, the PND SS8 is a durable investment combining speed, precision, and high processing capacity. Production capacity: 3,000 pieces/h Functions: Cutting, coring (pitting) Cutting shapes: Slices, wedges, sticks Installed cutting knife: Mango coring knife Voltage: 400 V (3 + N, 50 Hz) Knsdpfx Aezur Srsamec Power: 1 kW Weight: 580 kg Year of manufacture: 2014 Dimensions (W x D x H): 4300 x 2030 x 2550 mm

Condition: ready for operation (used), Year of construction: 2022, controller manufacturer: TRUMPF, controller model: Touchpoint TruBend, overall weight: 30,500 kg, total width: 5,150 mm, total height: 2,995 mm, product length (max.): 6,500 mm, Folding Machine manufactured in 2022. This TRUMPF TruBend Center 7030 (B34) features a maximum bending edge length of 3,123 mm and a holder clamping force of 101 t. It includes a 2-axis part manipulator with a travel of 2,653 mm and an automatic loading/unloading system. If you are looking to get high-quality bending capabilities, consider the TRUMPF TruBend Center 7030 (B34) machine we have for sale. Contact us for further details. • Capacities • Max bending edge length: 3,123 mm • Min bending edge length: 200 mm • Min bending width with standard holder: 145 mm Knsdpszvdc Ssfx Aamjc • Min bending width with ENW tools: 40 mm • Max box height: 220 mm • Holder clamping force: 101 t • Material thickness: min 0.4 mm; max structural steel 3.0 mm; max stainless 2.2 mm; max aluminum 4.0 mm • Machine construction: Welded steel frame; bending system: Wedge drive; crowning: Included, adjustable via machine control • Manipulation and positioning • 2-axis part manipulator with suction cups (X travel 2,653 mm; stroke 100 mm; 12 suction modules) • 5-axis rear stop; rotary manipulator; front stop; loading pincers • Automatic part positioning and rotation • Speeds • Y-axis rapid traverse: 250 mm/s • Front stop speed: 3,000 mm/s • Part manipulator speed: 3,000 mm/s • Rotary manipulator speed: up to 3 rev/s • ToolMaster Bend speed: 2,400 mm/s • Positioning accuracy • Y-axis: 0.10 mm; X-axis: 0.05 mm; R-axis: 0.05 mm • CNC control • 21.5-inch touchscreen; OS: Windows 7 Ultimate 64-bit • Keyboard and mouse; USB; RJ45 network; Ethernet 10/100 Mbit/s • Internet teleservice / remote diagnostics • Bend angle measurement • Optical bend-angle assistance; integrated camera; graphical comparison of programmed vs. actual angle • Minimum part-side length for angle measurement: 10 mm • Safety equipment • CE certification; rotating safety doors; safety light barriers; working-area access protection • Foot switch with enable function; emergency stop • Electrical data: 80 kVA Additional equipment • Automatic loading/unloading system with storage interface • Automatic blank separation/feeding/transfer; automatic finished-part unloading • Belt conveyor for finished parts; max blank size 3,048 x 1,500 mm • Storage interface included • Loading trolley: Not included; Rail set: Not included • Tooling and tool systems • ToolMaster Bend: Automatic hold-down tool positioning and setup; automatic positioning of standard, Pick&Place, and curved holders • Included tooling: 16 standard hold-down tools (160 mm each); 6 Pick&Place hold-down tools; Pick&Place segments 10/15/20/40 mm; corner hold-down tool (199 mm); OBW90 and UBW90 bending tools • ENW equipment: ENW function for tilting hold-down tools; ENW110-40 tool (length 3,123 mm; depth 40 mm); min bending width with ENW tools 40 mm • Additional part handling modules • 12 three-surface vacuum modules (upper/lower/front suction) • 6 magnetic modules; 4 two-surface magnetic modules • Vacuum and magnetic modules can be used together • Software and data capture • TecZone Fold floating license: automatic programming from 2D/3D data, automatic bending program generation, 3D simulation, collision checking, manual modification • Wireless 2D code reader with Bluetooth: barcode and DataMatrix reading; automatic production program loading

Condition: used, Year of construction: 1980, functionality: fully functional, 1 branded driven splitting wedge Arta/C, workshop overhauled Knjdpfjqvz U Eex Aamoc New bearings for pressure rollers and motor new tips opening width: 430 mm

Condition: used, Power chuck, 3-jaw wedge bar lathe chuck, type presumably Duro 1802W-411592 Ksdpfxjxcbmho Aamonc Chuck No. K W-411592 Outer diameter: 180 mm Inner diameter: 45 mm Thread connection for clamping drive: M52 x 1.5 mm Cylindrical centering ring mount: Ø 140 mm Mounting holes: 3x Ø11 mm Bolt circle: 105 mm Max. speed: 5000 rpm Max. clamping force: 3000 daN Base jaw dimensions (L x W x H): 64 / 74 x 20 x 29 mm - 1 set of chuck jaws consisting of base jaws and reversible hard top step jaws - 1 set of chuck jaws consisting of base jaws and reversible soft top step jaws - 3 sets of soft top jaws Weight: 21.5 kg Good condition Additional sets of top jaws available under stock number 62056

Condition: used, functionality: fully functional, Complete stationary sawmill including: Log infeed, transverse conveyor Log lifting device with ejector Transverse conveyor and feeder to the clamping carriage Clamping carriage, hydraulically operated, with auxiliary carriage, electrically operated; the entire sawing line can be controlled from the clamping carriage. FULL SAW FRAME BRAUN CHGB 71/75 with automatic overhang adjustment and stepless feed Saw blade tensioner Jansen, hydraulically operated Electrically adjustable wedge with electric extraction rollers Roller conveyor with pusher Spiral roller conveyor for boards to the edging line Transverse conveyor in front of the edger Undertable cutoff saw DOUBLE EDGER PAUL KMEZ with trim removal system Roller conveyor after the edger with discharge to the left/right Knjdpfxsz I Tabs Aamoc Saw blade sharpening machine for saw frames, Vollmer Saw blade setting machine for saw frames, Riva Circular saw sharpening machine, Vollmer Sawdust and trim disposal, shaking chute, vibrating screen with 1 fraction 2 conveyor belts for feeding into the silo

Condition: good (used), Year of construction: 2018, Approx. 600m conveyor system, packing line, SSI Schäfer – used Price ex works (net): only €99,500, disassembled, packaged, and loaded! Manufacturer: SSI Schäfer Year of manufacture: 2018 Type: Conveyor system Many short sections/elements Roller width mainly 70cm, element width approx. 78cm Motorized roller conveyor Belt pusher Belt conveyor Incl. curved belt conveyor from Transnorm Curve/wedge merge (roller conveyor curves) Tapered roller curve Kedpfozpf Nyjx Aamjnc Roller switch Back-up roller conveyor Folding elements/passages Etc. Ground floor, 6 roller conveyors for goods in and out with conveyor belt drive - 1st floor, five roller conveyors to supply 80 workstations with conveyor belt drive - 1st floor, five roller conveyors to remove goods from 80 workstations with conveyor belt drive - 1st floor, used cardboard belt conveyor for removing cardboard boxes with conveyor belt drive Incl. various belt conveyor curves from Transnorm Used cardboard box sizes (L x W x H): max. 800x600x320mm, min.: 340x120x119mm, max. weight 32kg, min. 1kg The offered price includes control cabinet, control system, light barriers, transitions, etc. Not included in the price (but can be purchased for an extra charge): the 80 packing tables, 2 spirals. Condition: good Available: from approx. August 2026, or by arrangement Location: Erfurt area

Condition: used, 3-jaw wedge bar power chuck FORKARDT type HGF 160-45-3 HI GRIP No. 109452 Diameter: 165 mm Internal diameter: 46 mm Cylindrical centering ring mounting: Ø 140 mm Max speed: 5,500 rpm - Wedge bar chuck with centrally adjustable clamping jaws - 1 set of stepped jaws, reversible for use as hard or soft jaws (can be reversed by 180°) - 3 mounting holes Ø 11 mm, bolt circle 105 mm Weight: 9.3 kg Very good, as-new condition Knsdpoy Ehypefx Aamoc

Condition: as good as new (ex-display), PFAFF 8320 - 111/101 long-arm version with table Kjdoxa D Hrjpfx Aamenc

Condition: refurbished (used), Year of construction: 2017, BUCK TBFZ 3000 CNC incl. tools and clamping wedges The machine has been comprehensively overhauled and modernized. Conversion to Heidenhain iTNC530 including completely new control cabinet Travel: X-3000 mm, Y-1.500 mm, Z-1500 mm Z1: 500 mm A-axis: +/- 20° Knjdjz Ntr Iepfx Aamec Depth of drilling in a single pass Z: 1.500 mm Drill depth by readjusting Z1: 2.000 mm Drilling performance with single-lip internal thread drilling tools: 3-40 mm diameter NC rotary table 360° B-axis: 2.500 x 2.300 mm max. Tischladung: 25.000 kg Internal coolant supply (IKZ): 70/100 bar Spindle drive power at 60%: 20.5 kW Express travel X/Y/Z: 15.000 mm/min Spindle speed: 0-6,000 RPM Control: Heidenhain iTNC530 tool holder: SK50 Space requirements: approx. 8.5 m x 8.5 m x 3.5 m machine weight: approx. 24,000 kg max. table load: 25.000 kg

Condition: used, axle configuration: 2 axles, total length: 157,000 mm, total width: 25,500 mm, Year of construction: 2008, Equipment: ABS, = Additional Options and Accessories = - EBS - Electronic Braking System - Air suspension, rear - Air suspension, front = Notes = For inquiries regarding the vehicle, please contact Mr. Seidel (at tel. ). Used EBERT forestry semi-trailer, low-bed trailer, type: TLS 36 ST, VIN: W0985180080D17001 self-supporting, with ECAS air suspension, fully hydraulically steered with remote control & ABS First registration: 03/2008, Permissible gross weight: 36,000 kg, Saddle load: 16,000 kg, Rear axle load: 20,000 kg, MOT: 01/2007, Low-bed length: 8,750 mm, Length: 15,700 mm, Width: 2,550 mm, Payload approx.: 27,000 kg The forestry machine is transported at a height of approx. 10-25 cm above the road surface. Tires: 235/75R/17.5 low-profile, tubeless. Tire tread: 1st axle 9-12 mm, 2nd axle 7-11 mm Axles: 2 x 10 tons Axles with S-cam brakes and ABS, hydraulically actuated two-circuit forced steering controlled from the kingpin. Saddle plate with 2-inch kingpin and drive-away wedge. 24V electric generator with HD piston pump, oil tank and 2 batteries enable remotely controlled functions via wireless remote control. Brakes: Two-line brake system according to EC with spring-loaded brake cylinders acting on the rear axles. With ABS Lighting according to StVZO (German Road Traffic Licensing Regulations). Integrated into a recessed underrun protection, incl. license plate holder. Also, warning lights in the pull-out marker panels for overwidth transport. The hydraulic forced steering is equipped with a wireless remote control as standard, so the driver can "steer" from the cab in tight hairpin turns and during turning maneuvers. Options included in the price: a. Yellow rotating beacon at the rear, pluggable b. with 4 pull-out marker panels (red/white) with a retracted width of 2,550 mm and an extended width of 2,750 mm or 3,000 mm. c. with electro-hydraulically operated ramps Upon request, we will provide you with a leasing or financing offer. Mr. Seidel (tel. ) will be happy to assist you. Further information can be found on our website. ... Errors, changes and prior sale reserved !!! - Steering axle = Further information = Unladen weight: 9,000 kg Payload: 27,000 kg GVW: 36,000 kg Kodpfx Aasz Engkjmjnc Last inspection: 2027-01 Please contact Tobias Ebert for further information.

Condition: used, mileage: 28,817 km, power: 210 kW (285.52 HP), axle configuration: 4x4, color: green, driver cabin: day cab, gearing type: mechanical, emission class: euro4, total width: 25,500 mm, total height: 37,200 mm, Year of construction: 2007, Equipment: ABS, EBS, air conditioning, For inquiries regarding the vehicle, Mr. Seidel will be happy to assist you (by phone). Mercedes-Benz Axor 1829 A 4x4 Flatbed with Tarpaulin A70 Front axle differential lock, AL3 front axle 7.5 t, AM3 rear axle H7 13.0 t crown wheel 300, AR1 axle ratio i = 5.333 (HL7), B02 anti-lock braking system (ABS), B43 dual-line trailer brake, BB6 drum brakes on front and rear axles, BB9 brake circuit rupture protection, C42 rear axle stabilizer, underframe, C63 steel bumper version, CL9 LS 6/LS 8 steering, CR5 reinforced frame head for special bodywork, CU0 foldable rear underride guard (Meiller), D15 tiltable sunroof, D17 turntable, E10 blackout circuit, E84 lockable battery box, ES8 auxiliary socket 24 V/15 A, cab rail, F20 S cab, extended by 180 mm, FE5 electric window regulators, driver and passenger doors, FL3 reinforced cab suspension, rear, FL6 standard cab suspension, FN1 split dashboard, FQ7 storage over windshield, 2 compartments, FS9 electrically adjustable exterior mirror, driver’s side, FX7 aerodynamic front mirror, GS3 hydraulic gearshift, GT1 gearbox G 131-9/14.57-1.0, GV3 transfer case VG1400 – 3W, H03 air conditioning, H04 additional thermal insulation, HF2 pollen filter, HH1 Eberspächer D5W S hot water auxiliary heater, I40 tires 14.00 R 20 front/optional, I41 tires 14.00 R 20 rear, IA1 axle configuration 4x4, ID1 leaf suspension, IQ8 wheelbase 4200 mm, IV0 18-tonner, IX5 6-cylinder inline engine, IY2 hydraulic fluid Pentosin CHF 11 S, JD3 digital tachograph EC, rev counter and auxiliary recorder, ADR, JK3 multi-function instrument cluster, graphic display, eco-meter, KAL3 front axle 7.5 t, KCYF flag holder, KESM jump-start/power socket 2-pin (STANAG), KFML 2 rifle holders for "G36" model, KFMP cab equipment package for BWFPS, KFMY 1 additional rifle holder, KG1 muffler, small SCR cat, stainless steel, KH8 silencer with downward-curved exhaust pipe, KH9 exhaust moved to rear, KHH1 Eberspächer D5W S hot water auxiliary heater, KP2 AdBlue tank 35 l, KP9 AdBlue container plastic, KS2 main tank 300 l steel, KSMA foldable middle seat with seat belt, KTM0 weight variant 16.5 t (7.5/9.0), L30 stone guard grille, headlights, L72 electricals for third-party bodies, M49 tandem air filter, M89 flame device, MD4 speed limiter 90 km/h, EU, MD9 cruise control, MQ8 engine, R6, LA, 210 kW (286 hp), 2200 rpm, MS4 BlueTec 4 (Euro IV), N05 PTO gear drive MB, 2c, N80 transmission lock for PTO, NZ1 simple PTO, Q29 trailer/towing coupling, Ringfeder, QC8 front spring 7.5 t, asymmetrical, QE9 rear spring 13.0 t, rigid, R82 wedge rim 10.00-20, single tires, R87 spare wheel/spare rim, S28 middle seat with seat belt, SA0 artificial leather seat covers, SG2 Isringhausen standard passenger suspension seat, SG5 Isringhausen standard driver suspension seat, TM0 weight variant 16.5 t (7.5/9.0), Cargo area dimensions: L 5,090mm W 2,470mm H 1,990mm, NATO, coupling heads, tire tread: 1st axle 14 mm; 2nd axle 13-14 mm Upon request, we can provide you with a leasing or financing offer. Mr. Seidel (phone) is happy to assist you. Kedpfszz U Nmox Aamsnc Further information can be found on our homepage. ... Subject to errors, changes, and prior sale!!! - ESP, auxiliary heater Cab: Short-haul/Distribution Engine displacement: 6,347 cc Gross vehicle weight: 16,500 kg Contact Tobias Ebert, ...

Year of construction: 2014, condition: excellent (used), functionality: fully functional, Double mitre saw with 5 NC axes suitable for aluminium and light metal alloys, featuring automatic movable head adjustment and electronic control of all angles from 22°30' (internal) to 45° (external), with a fine-resolution of 280 positions per degree. The 600 mm saw blades offer two different feed modes. The standard feed optimises the cutting chart vertically for profiles taller than 450 mm. The radial mode utilises an extended stroke beyond the vertical reference plate, producing a large cutting chart horizontally for profiles up to 240 mm wide. Accessories: - Pro software package: Overlength / Shortcut / Cross-cut / Wedge cut Knsdpfx Asz Ady Dsamsc - Pneumatic profile supports - Data import from external software (LogiKal / Schücal / MAP / TXT / Excel, etc.) - Additional clamps - Additional material support - Short part clamp for automatic and semi-automatic cutting - Additional clamp on roller conveyor - Motorised feed - Safety hood with adjustable opening width for improved noise and dust protection The saw has extremely low operating hours and cutting cycles! It is in excellent condition. Only 13,000 cuts and 900 operating hours! Twin-head cutting-off machine with 5 NC axes for aluminium and lightweight alloys, with automatic mobile head movement and electronic management of all angles from 22°30’ (internal) to 45° (external) with a resolution of 280 positions per degree. The 600 mm saw blades have two distinct feed modes. Standard feed optimises the cutting chart in the vertical direction for cutting profiles over 450 mm in height. The radial mode utilises a large stroke beyond the vertical reference plate, generating a large cutting diagram horizontally for profiles up to 240 mm wide.

Condition: good (used), Year of construction: 2014, Ref. -No.: 10553 Manufacturer: HANDTMANN / BAVIUS Type: HBZ Trunnion 120 Year of construction: 2014 Type of control: CNC-Steuerung Control: Heidenhain TNC 640 Storage location: Halberstadt Country of origin: Germany Machine-No.: 200XXXXX X-Travel: 1270 mm Y-Travel: 1100 mm Z-Travel: 900 mm Table Height: Ø 1200 mm Table Load: 2000 kg Max. Tool Weight: 20 kg Max. Tool Length: 90 x 200 / 24 x 400 mm Max. Tool Diameter: Ø 130 mm Knedpjzc D Aajfx Aamjc Tool Taper: HSK 100 Numbers Of Tools In Magazin: 40 Tool Piece Magazine With: 140 Pcs./pcs. Spindle Turning Speed - Stepless: 14.000 RPM Max. Torque: 15000 Nm Rapid Traverse X-Axis: max. 60 m / min Rapid Travel Y-Axis: max. 60 m / min Rapid Traverse Z-Axis: max. 60 m / min Machine length: 7500 mm Machine width: 5500 mm Machine Height: 3500 mm Weight Of The Machine Ca.: 26 t Rapid traverse C-axis: max. 25 RPM Rapid traverse A-axis: max. 20 RPM A-axis (swivel axis): - 30 / + 120 ° C-axis (rotary table axis): 360 ° Further information: - Horizontal machine, Y-axis arranged vertically - Machine stand designed as a welded construction - set up on height-adjustable precision wedge shoes, chip tray with cooling lubricant device, for external splash water cooling capacity: approx. 400 liters, with clean water pump, LP circuit, approx. 40 1/min at approx. 5 bar and rinsing nozzles on the Z-axis and/or the spindle - Complete safety housing - Stainless steel interior lining - Work area lighting - Manual loading door to the work area with polycarbonate safety window with glass front panel - Side viewing window to the work area with polycarbonate safety pane with glass front pane - Maintenance area freely accessible - HSK 100 hollow shank taper - Tool clamping via springs, tool release hydraulically - Tool clamping control - Cone cleaning - incl. spindle orientation The machine can be viewed under power by arrangement.