Used Wedge Zinc for sale (685)

Condition: new, functionality: fully functional, Year of construction: 2026, color: grey-black, overall weight: 16,000 kg, maximum load weight: 13,800 kg, empty load weight: 2,200 kg, loading space volume: 13 m³, loading space width: 2,420 mm, loading space length: 6,500 mm, loading space height: 800 mm, Dear Sir or Madam, We are offering a new 13m3 roll-off container with drop sides for sale. Guodpsypb Nwsfx Aafef The container has the following features: - Standard: DIN 30722-1 - Lifting height: 1,570 mm - Lifting bracket: 50 mm diameter - Container internal length: 6,500 mm - Container internal width: 2,420 mm - Container internal height: 800 mm - Floor plate: S235 steel (St37-2) with 5 mm floor thickness - Two-part, spring-relieved side walls made of S235 steel with 3 mm side wall thickness - All steels exclusively from Thyssen Krupp - The steel parts are automatically sandblasted before processing to optimize further processing and corrosion resistance - Outer rollers are lubricatable and replaceable - 5 pairs of recessed lashing hooks in a multilock rail with 2,500 kg (positionable as needed) - 2 lashing rings on the front side, each with a tensile strength of 7,000 kg - Swing-out tailgate including spring-relieved access ramp - All posts and side walls can be easily and completely removed if required! - Front wall height: 1,600 mm - Longitudinal beams: IPN 180 - All-round net hooks - Painted in RAL 7016 anthracite - The container is completely primed with a 120mu zinc phosphate primer and then painted with high-quality 2-component paint in a thickness of 80mu - Total weight: 16,000 kg / Empty weight: approx. 2,300 kg / Payload: 13,700 kg - Including nameplate and container inspection according to DGUV rule 114-010 (formerly BGR 186) - Warning marking according to §32 (1) StVO and DIN 67520 - Unit price: €7,800.00 plus VAT - Available immediately Also in stock with other useful internal lengths (4.5m / 5m / 5.5m / 6m) Nationwide delivery possible for an extra charge! If you are interested in other roll-off container products, please do not hesitate to contact us at any time. Errors and prior sale excepted.

Year of construction: 1989, condition: ready for operation (used), Processes: nickel strike, alkaline/cyanide zinc plating, base material: steel, stainless steel, throughput capacity for racks: approx. 11/h, production time: operating time minus rack cycle time, drums per rack: 1, internal drum length: 870mm, width across flats: 350mm, average loading weight per drum: approx. 37kg, max. loading weight per drum: approx. 50kg, the loading weight depends on the geometric surface area of the parts, anode distance: 650mm (700mm for electrolytic degreasing), operating voltage: 3x 220/380V, 50Hz, Mp/SL (-15 to +10%), heating: electric, heating-up time: approx. 5h at an initial temperature of approx. 15°C, cooling: cooling water, supply: 8°C, return: 12°C, city water: 2bar, circulating water: 2bar, compressed air: 8bar, drive/control power: approx. 166kVA, rectifier power: approx. 240kVA, heating power: approx. 136kW, extracted air volume: cyan./alk. 12,000m³/h, acidic/alk. 19,450m³/h, dissipated heat quantity: approx. 80,000kcal/h, the system has been emptied of all substances, transformers are free from hazardous materials, complete documentation available. An on-site inspection is possible. Gusdpey T N Iqjfx Aafof

Year of construction: 1983, condition: ready for operation (used), Turning diameter over bed/face slide: 630mm/340mm, turning length: 2000mm, center height: 290mm, clearance: 70mm, speed: 1180rpm, chuck: 400mm wedge bar chuck, tailstock: MK5, total power requirement: 15kW, machine dimensions X/Y/Z: approx. 5000mm/1350mm/1500mm, weight: approx. 4500kg. Including 2x 340mm steady rests, 2x medium steady rests, face plate with a diameter of 630mm, 2x face plates with cross slots, various tool holders, steady rest box, tool cabinet with additional tools, Heidenhain position indicator and 400mm key bar chuck. Documentation available. On-site inspection is possible. Gsdpfju Av E Hsx Aafeuf

Year of construction: 2012, condition: ready for operation (used), Travel X/Y/Z: 2000mm/750mm/800mm, NC rotary table diameter: 950mm, milling head: SK50, milling head tilt: +/-90°, tool positions: 48, max. workpiece weight: 2500kg. Dimensions X/Y/Z: approx. 4000mm/3100mm/3200mm, weight: approx. 16000kg, control: Heidenhain 640. Including measuring probe M & H, 40bar IKZ, work area extraction Reven, paper belt filter Resy, brine conveyor, chip cleaning gun, wedge chuck Schink, diameter: 630mm, with various clamping jaws and other various turning and milling tools. Documentation available. On-site inspection is possible. Gedpst Ambwsfx Aafjuf

Year of construction: 1998, condition: ready for operation (used), A complete sawmill including all peripheral equipment and conveyor units is available. 1) Log yard: Baljer & Zembrod Asterix sorting carriage, year of manufacture: 1998, operating hours: 16382h, rail system type: double-T-beam, rail system length: 66m, cross conveyor dimensions X/Y: 7300mm/3300mm, log train length: approx. 40m. Including cut-off table with scraper conveyor. The running rails of the rail system were renewed approx. 5 years ago. 2) Sawmill: 2.1) Linck U71 frame saw in reinforced design with larger main bearing and a general overhaul carried out in 1995. 2.2) Linck VAK carriage. Linck Vy auxiliary carriage in heavier-duty design. 2.3) Möhringer butt log reducer. 2.4) Linck splitter wedge. 2.5) 2x Diemer edging saw units, passage width: 500mm. 2.6) Dankert band saw, wheel diameter: 1200mm. 2.7) Hydraulic log carriages with 3 clamping supports, cutting length range: approx. 1800mm-5000mm. 2.8) Various roller conveyors. 2.9) Various cross conveyors, vibration troughs, etc. 3) Saw service room: 3.1) Albert sharpening machine with flank grinding for band saws. 3.2) Oppliger straightening machine for band saws. 3.3) Rolling bench for band saws. 3.4) Vollmer CNE sharpening machine for circular saws. 3.5) Meinert manual setting machine for circular saws. 4) 2x Hildebrand Brunner drying chambers, volume: approx. 30m³-60m³. 5) Schmid wood chip heating system, year of manufacture: 1995, heating output: 450kW. 6) Manitou rough-terrain forklift. 7) Lewecke vacuum lifting machine. This is a complete sawmill. Documentation available. An on-site inspection is possible. Guedpfx Aaszf Nbxjfjf

Condition: used, machine/vehicle number: 1388A, mileage: 932 km, power: 179 kW (243.37 HP), first registration: 07/1986, fuel type: diesel, overall weight: 16,892 kg, axle configuration: 3 axles, color: green, gearing type: automatic, Equipment: all wheel drive, compressor, TUV is NEW!!! So-KFZ registration, The AM General in a really good condition directly from the Army, well maintained and maintained, the body is in a great condition (vehicle from the reserve) the paint is also already, just Natogrun matt, The M931A1 is equipped with: Cable winch, all-wheel drive, 5-speed automatic transmission, transfer case with stowage and off-road gear, power steering (super smooth), 2 diesel tanks with switch for the right or left tank, raised exhaust, air brake with ABS, 3 front seats, the body is a saddle plate movable for off-road driving. The saddle plate can also be fixed for road operation by means of sliding wedges , The km indication are miles , Driving license class 2 (truck) , Tire size 14.00R20 tubeless (very good condition) , Top speed 105 km / h , Engine capacity 14011cm? , , 24Volt power supply , The M931A1 has not only Tuv, but also drives reliably :-) - A tractor unit for real off-road use ! ! ! - The AM Generalist is a real pleasure to drive and can also be insured cheaply as a youngster. - ATTENTION ! ! the DEALER PRICE is as the vehicle is, without TUV and so on.... - All my vehicles can be seen on my homepage. - You are now rushing back and forth from Flensburg to Berchtesgaden to look at the different cars, but here you will find over 150 vehicles of the following types: - Hanomag AL 28, Magirus Deutz, MAN, Steyr, Dodge WC, Saurer, Unimog, GMC 6x6, Steyr-Puch, Iltis, Willys, G-Model, Mowag, DB, etc., and all with TUV. - even with TUV. - There are also an unimaginable number of spare parts and accessories. - Why would you settle for anything less? - Give us a call on 0049 (0)2248 le Gru?e Euer Philipp aus dem Hanfbachtal Guedpfxeqx Sxls Aafsf

Condition: used, maximum load weight: 29,253 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 09/2017, loading space length: 13,620 mm, loading space width: 2,480 mm, loading space height: 3,000 mm, Equipment: ABS, * Edscha sliding cover * Sliding tarpaulin with theft protection on both sides * Support wedges Gusdozq Nvgepfx Aafef * Storage box * CodeXL * Wabco trailer EBS-E * Air suspension * Schmitz axles with disc brakes ----Internal vehicle number: 12284 Errors and prior sale excepted.

Condition: new, empty load weight: 2,030 kg, maximum load weight: 11,970 kg, overall weight: 14,000 kg, axle configuration: 2 axles, loading space length: 4,000 mm, loading space width: 1,800 mm, suspension: steel, tire size: 285 /70 R19,5, color: other, gearing type: other, front tire size: 285 /70 R19,5, rear tire size: 285 /70 R19,5, driver cabin: other, emission class: none, fuel: biodiesel, Equipment: ABS, compressed air brake, ZINCED, closed floor, skip according to DIN 30720 up to max. 15 cbm, or for ASK waste compactor, 2 x support, rear, loading height approx. 900 mm, toolbox, , surcharge for ramps 1.800 ¤ net, , -- Misprints, errors and omissions excepted, sample pictures --, More data under: !, More Details: ! Gujdpfezqtyvjx Aafjf

Condition: used, Year of construction: 2019, pressure 60.0 t chamfer lenght 1270 mm distance between columns 1000 mm column arm 410 mm ram stroke speed 160 mm/sec work speed 10.0 mm/sec return speed 165 mm/sec work stroke 275 mm dayligth 530 mm table height 900 mm table width 90.0 mm back stop - adjustable 500 mm control DA 66T oil volume 150 ltr. voltage 380 V engine output 7.5 kW Weight 4320 kg range L-W-H 2250 x 1960 x 2750 mm current new price approx. 65.000 euros very rarely used! Special price on request - in checked condition - machine video - ?v=KRifrqTgkVU ----- SPEED BEND PRO CNC press brake: * increased installation height * increased cylinder stroke * and increased bending beam speeds ----- Equipment: - CNC electro-hydraulic press brake - DELEM CNC control model "DA-66T" graphics/touchscreen * 2D graphic touchscreen programming mode * 3D representation in simulation and production * 17" color TFT screen with high resolution * Bending sequence calculation * Product programming and representation in actual size * USB interface - CNC controlled axes: Y1 - Y2 - X - R - CNC electro-motorized back stop (X axis) * on ball screws * Travel path .. 500 mm * Travel speed .. 500 mm/s * with 2x manually adjustable stop fingers - CNC electro-motor height adjustment (R axis) * Travel path .. 250 mm * Travel speed .. 350 mm/s - AMADA/PROMECAM upper tool holder * including clamping jaws with upper wedge camber * 1x ROLLERI split set 60° upper tool - AMADA/PROMECAM lower tool holder * including 1x die shoe "C 1050-R" * 1x AMADA 1-V die 85° - Safety device at the rear (door including safety switch) - BOSCH/HOERBIGER hydraulic components - SIEMENS electrical components - FIESSLER AKAS laser protection device in front of the machine - 2x front support arms with SLIDING system (HIWIN plain bearings) - 1x freely movable double foot control - CE mark / Declaration of conformity Guedozlulpepfx Aafef - Operating instructions including circuit and hydraulic diagram

Condition: as good as new (ex-display), Year of construction: 2025, Japa® 505 PRO: Top performance and versatility for the highest demands Advanced splitting technology with Perfect Split In addition to the proven Perfect Cut sawing system, the PRO model features a unique Perfect Split splitting blade, which, in combination with the conventional splitting blade, always ensures consistent and high-quality firewood production. Switching between the splitting methods takes only a few minutes, highlighting the exceptional versatility of this machine. Advanced cleaning with Perfect Clean The Japa® 505 PRO is equipped with the innovative Perfect Clean cleaning system, which efficiently removes sawdust, wood chips, and bark from the final product. This ensures clean and tidy firewood, which not only reduces the cleaning effort required for the machine but also significantly optimizes the workflow. Clean firewood dries faster, burns better, and achieves a higher resale value. Gjdpfxjxx T Aaj Aafjuf Patented hydraulic chain tensioner Thanks to the patented hydraulic chain tensioner, sawing is always smooth and safe. It extends the life of the chain and saw blade and allows for tool-free chain changes in seconds. In addition, a hydraulic feed roller at the beginning of the feed belt facilitates the transport of large logs – for even better ergonomics, safety, and production efficiency. Technical data: Log diameter 500 mm Splitting force 16 tons Splitting wedge 6-way Log length up to 50 cm Oil capacity 100 l PTO speed 500 rpm Motor output S1 15 kW / 400 V Gear oil 80W 90 Conveyor belt length 4400 mm Weight 2330 kg Original photos & honest descriptions. Shipping by arrangement. Fair prices. Offer price for basic machine, demo model - special equipment extra. ❓If you have any questions, please contact us – we will respond quickly and courteously!

Condition: new, functionality: fully functional, overall weight: 650 kg, The Japa® 315+ with electric drive offers a wide range of functions and high capacity in a compact, mobile unit. We have increased the capacity – the maximum wood diameter is now 31 cm, and the length is 50 cm. Technical specifications: Log diameter: 310 mm Splitting force: 5.6 tons Splitting wedge: 4-way Log length: up to 50 cm Oil capacity: 30 l Motor output S1: 4 kW / 400V Weight: 600 kg Dimensions: 4060 x 1330 x 2580 mm Original photos & honest descriptions. Shipping available upon agreement. Gusdpfjxx Szhox Aafof Fair prices. Price for basic version, demonstration model – optional equipment extra. ❓If you have any questions, please don't hesitate to contact us – we will respond quickly and courteously!

Condition: new, axle configuration: 3 axles, Year of construction: 2022, Equipment: ABS, Technical data for the EBERT TLS 43 ATV special low-loader: Permissible saddle pressure: 19,000 kg, Permissible axle load: 36,000 kg, Permissible total weight: 55,000 kg, Unladen weight according to DIN: approx. 15,500 kg, Low-bed length i.L.: approx. 6,650 mm + 4,000 mm, Axle table length: 3,550 mm, External width: 2,550 mm, Loading edge/low-bed: approx. 200 mm, 350 mm, Sliding table length: 500 mm, Extension/low-bed to: 3,050 mm, Low-bed/extendable by: 4,000 mm, B-dimension: 13,300 mm, Entire vehicle hot-dip galvanized, with epoxy primer and 2K paint finish, overwidth signage at the front and rear with red/white panels. Godpfx Aaoyfu N Aefeuf Wheels: 13 x Michelin 245 / 70 R 17.5 X MULTI T VB 143J/146F Steering: TRIDEC DLS with Tritronic Axles: 12,000 kg – DLS single-wheel suspension, hydraulically steered and hydraulically sprung Front upper deck: Sideboards, 600 mm high, corners angled on the front upper deck, doors accessible from the outside in the corners on the left and right, lockable storage box with a lid behind the front wall, height 600 mm, width 2,480 mm, depth 7,500 mm, spare wheel on the upper deck, behind the partition on the right, ladder on the right side to get from the low-bed to the front upper deck, hydraulic coupling for detaching on the left side, 6-way Multi-Faster coupling, 6 tie-down positions, 3,000 kg capacity, on the outside of the upper deck (eye-type tie-down points), 2 tie-down positions, 5,000 kg capacity, on top of the longitudinal beams (towards the rear). Low-bed: Climbing aids on the boom - extension, outer frame t=8 mm, low-bed extendable by 4,000 mm and lockable every 500 mm, with sliding table, lockable every 250 mm, 28 tie-down positions, 10,000 kg capacity, on the outside of the outer frame, 24 insertion pipes 90 x 90, evenly distributed for low-bed extension to 3,050 mm, 50 mm hardwood planks are placed between the extension tubes, 10 mm overhang. Rear upper deck: Upper deck sloping and perforated towards the front, for retrofitting ramp attachment profiles, using adapters with a galvanized finish, ramp attachment profiles (Altec) – C rails at the rear, 8 tie-down positions, 10,000 kg capacity, on the outside of the upper deck, 6 tie-down positions, 5,000 kg capacity, in the excavator well, 10 tie-down positions, 5,000 kg capacity, for overwidth on the outer frame, closure of the excavator well at the front and rear with a wooden floor panel (insertable). Electrical system: Use NATO coil, energy comes from the towing vehicle, revolving beacon at the rear in the middle, side lights in LED version, standard rear light for vertical mounting (LC5), work lights on the upper deck, to illuminate the low-bed, overwidth signage at the front and rear for controlling the detachment, sensor for securing and pressure switch for the suspension. Air: Aluminum air reservoir 80 l, TEBS modulator, locking of extension on the left and right (valve on the side in the rear upper deck), double release valve. Hydraulics: Hydraulic system on the upper deck for steering, suspension and detachable gooseneck. Accessories: 2x 4 pieces of wooden plank as support for extending the low-bed and intermediate table, 2 pieces of securing wedges for detaching, 4 pieces of chock blocks. Upon request, we will provide you with a leasing or financing offer. Mr. Ebert (Tel. ) will be happy to assist you. Further information can be found on our website. Errors and prior sale are excepted! Rental possible GVW: 55,000 kg Please contact...

Condition: new, axle configuration: 2 axles, Year of construction: 2021, Equipment: ABS, Technical data for the EBERT TLS 43 ATV special low-loader: Permissible fifth wheel load: 19,000 kg, Permissible axle load: 24,000 kg, Permissible total weight: 43,000 kg, Unladen weight according to DIN: approx. 12,500 kg, Low-bed length i.L.: approx. 6,650 mm + 4,000 mm, Axle center distance: 2,700 mm, Outer width: 2,550 mm, Loading edge/low-bed: approx. 200 mm, 350 mm, Sliding table length: 500 mm, Widening/low-bed to: 3,050 mm, Low-bed/telescopic extension: 4,000 mm, B-dimension: 12,000 mm, Entire vehicle hot-dip galvanized, with epoxy resin primer and 2-component paint finish, Overwidth signage at the front and rear with red/white panels Wheels: 9x Michelin 245 / 70 R 17.5 X MULTI T VB 143J/146F Steering: TRIDEC DLS with Tritronic Axles: 12,000 kg – DLS single-wheel suspension, hydraulically steered and hydraulically sprung Godoyfvwbspfx Aafjuf Front upper deck: Doors accessible from the outside in the corners on the left and right, storage box with lid behind the front panel, height 600 mm, width 2,480 mm, depth 7,500 mm, spare wheel on the upper deck, behind the partition on the right, ladder on the right side to access the front upper deck from the low-bed, hydraulic coupling for detachment on the left side, 6-way Multi-Faster coupling, 6 lashing points, 3,000 kg design, on the outside of the upper deck / eyelets, 2 lashing points, 5,000 kg design, on top of the longitudinal beams (towards the rear) Low-bed: Climbing aids on the boom - extension, low-bed telescopic extension by 4,000 mm and lockable every 500 mm, with sliding table, lockable every 250 mm, 28 lashing points, 10,000 kg design, on the outside in the outer frame, 24 socket tubes 90x90, evenly distributed for widening the low-bed to 3,050 mm, 50 mm hardwood planks are placed between the extension tubes, 10 mm overhang Rear upper deck: Front upper deck slanted and perforated for retrofitting ramps, galvanized by means of adapters, ramp receiver profiles (Altec) – C rails at the rear, 6 lashing points, 10,000 kg design, on the outside of the upper deck, 6 lashing points, 5,000 kg design, in the excavator well, 8 lashing points, 5,000 kg design, in the case of overwidth in the outer frame, closure of the excavator well at the front and rear with a wood-based floor panel (insertable) Electrical system: NATO connector, power supply from the towing vehicle, rotating beacon at the rear in the middle, side marker lights in LED design, standard tail light for vertical mounting (LC5), work lights on the upper deck to illuminate the low-bed, detachment: sensor for securing and pressure switch for the suspension Air: Aluminum air tank 60l (2x 10l, 2x 20l), TEBS modulator, locking mechanism for extension on the left and right (valve on the side in the rear upper deck), double quick-release valve Hydraulics: Hydraulic system on the upper deck for steering, suspension, and detachable gooseneck Accessories: 2x 4 pieces of wood plank as support for widening the low-bed and intermediate table, 2 pieces of locking wedges for detachment, 4 pieces of support wedges On request, we will provide you with a leasing or financing offer from Mercedes-Benz Bank. Mr. Ebert (Tel. ) will be happy to assist you. Further information can be found on our homepage. Errors and prior sale excepted! Rental possible = Further information = Unladen weight: 12,500 kg Payload: 30,500 kg GVW: 43,000 kg Contact Tobias Ebert for further information.

Condition: used, axle configuration: 2 axles, total length: 157,000 mm, total width: 25,500 mm, Year of construction: 2008, Equipment: ABS, = Additional Options and Accessories = - EBS - Electronic Braking System - Air suspension, rear Gedpfx Aoztltmjafeuf - Air suspension, front = Notes = For inquiries regarding the vehicle, please contact Mr. Seidel (at tel. ). Used EBERT forestry semi-trailer, low-bed trailer, type: TLS 36 ST, VIN: W0985180080D17001 self-supporting, with ECAS air suspension, fully hydraulically steered with remote control & ABS First registration: 03/2008, Permissible gross weight: 36,000 kg, Saddle load: 16,000 kg, Rear axle load: 20,000 kg, MOT: 01/2007, Low-bed length: 8,750 mm, Length: 15,700 mm, Width: 2,550 mm, Payload approx.: 27,000 kg The forestry machine is transported at a height of approx. 10-25 cm above the road surface. Tires: 235/75R/17.5 low-profile, tubeless. Tire tread: 1st axle 9-12 mm, 2nd axle 7-11 mm Axles: 2 x 10 tons Axles with S-cam brakes and ABS, hydraulically actuated two-circuit forced steering controlled from the kingpin. Saddle plate with 2-inch kingpin and drive-away wedge. 24V electric generator with HD piston pump, oil tank and 2 batteries enable remotely controlled functions via wireless remote control. Brakes: Two-line brake system according to EC with spring-loaded brake cylinders acting on the rear axles. With ABS Lighting according to StVZO (German Road Traffic Licensing Regulations). Integrated into a recessed underrun protection, incl. license plate holder. Also, warning lights in the pull-out marker panels for overwidth transport. The hydraulic forced steering is equipped with a wireless remote control as standard, so the driver can "steer" from the cab in tight hairpin turns and during turning maneuvers. Options included in the price: a. Yellow rotating beacon at the rear, pluggable b. with 4 pull-out marker panels (red/white) with a retracted width of 2,550 mm and an extended width of 2,750 mm or 3,000 mm. c. with electro-hydraulically operated ramps Upon request, we will provide you with a leasing or financing offer. Mr. Seidel (tel. ) will be happy to assist you. Further information can be found on our website. ... Errors, changes and prior sale reserved !!! - Steering axle = Further information = Unladen weight: 9,000 kg Payload: 27,000 kg GVW: 36,000 kg Last inspection: 2027-01 Please contact Tobias Ebert for further information.

Condition: new, functionality: fully functional, This concerns an older model in new condition (never used). The vibrating plate is equipped with 2 wedge wire screens, which can be easily removed using quick-release clamps. The vibrating plate is made of rigidized 6WL sheet metal. Gusdpezncm Tjfx Aafof A water collection funnel is located under the screens. Type of vibrator: indirectly driven (consumes less energy than directly driven) Drive: 2x unbalanced motor 400V-50Hz Dimensions: Vibrating plate (internal): 610mm Vibrating plate length approx. 1,800mm Height approx. 1,200mm Material: Stainless steel 304

Condition: used, Year of construction: 1999, 1. EWD Log Processing Line BHZ (Timber Processing Center) Godjzt Hzlopfx Aafjuf Log handling Cable winch Cross conveyor Cable winch EWD H84 Infeed with FZ1 debarking unit EWD FZ3 Debarking unit, 2 x 75 kW EWD EVW Roller bed EWD FR22 T4 Saw with a cutting height of 330 mm, 4 x 80 kW EWD SK Splitting wedge Complete automatic log handling system Complete electrical system and controls Complete hydraulic system 2. EWD Edger Line FR9 T2 Cross conveyor Singulator Alignment roller conveyor Cross conveyor Slabber saw Edger infeed with plate measurement Edger FR9 with ripsaw Splitting wedge Transfer cross conveyor Side product sorting

Condition: good (used), functionality: fully functional, machine/vehicle number: WJMBB0A8M04010094, mileage: 24,500 km, overall weight: 7,500 kg, axle configuration: 4x4, color: red, Year of construction: 1995, Sales Description – Iveco Magirus 80.16 4x4 Firefighting Demonstrator Vehicle We are offering for sale our seldom-used IVECO Magirus 80.16 4x4 demonstrator vehicle, which was custom-built in 2013 together with Jacinto (Portugal) for demonstration purposes. The vehicle is based on a robust chassis from 03/1985 with just 24,xxx km mileage. The superstructure, including the fire centrifugal pump, was newly manufactured in 2013. The pump has only 34 operating hours. This fire engine is fully equipped and comes with a complete inventory. In addition, it features a fully automatic light mast and an 8.5 t front winch. Vehicle details: Model: Iveco Magirus 80.16 4x4 Chassis Year: 1985 Superstructure: 2013, Jacinto (Portugal) Mileage: approx. 24,000 km Centrifugal Pump Operating Hours: 34 h Equipment: Front winch (8.5 t), automatic light mast, full loading/inventory Equipment by locker (stowage compartment): Gujdpfsx Uy Rlex Aafjf Front left locker: Bolt cutter 2x Dräger breathing apparatus Hydraulic rescue spreader Hydraulic rescue cutter Power unit for rescue tools Projector Tarpaulin Fire extinguisher Hose cassette Middle left locker: Fireco high-pressure pump (water/foam) High-pressure lance Various hose management accessories Rear left locker: Connection high-pressure pump to hose reel Various hose management accessories Outlet: 1x water / 1x foam Rear locker: Pump control station Light mast controls 1x suction inlet 1x water supply 1x "emergency exit" water outlet 1x rapid attack hose reel Rear right locker: Supply/transport hoses Pressure hoses "Lifeline" 1x pressure relief valve Outlet: 1x water / 1x foam Middle right locker: Backup generator (for light mast) 5x traffic cones 1x water curtain 1x suction strainer incl. rope 1x first aid kit 1x canister Front right locker: Petrol-driven fan Foam branchpipe Hose bridges Hooligan tool Chainsaw Hose section Various equipment Right underfloor compartment: 5x warning lights Diesel tank Left underfloor compartment: Batteries 1x wedge Pneumatics Remarks: The vehicle has been used exclusively for demonstration purposes. It is technically in excellent condition, but both the chassis and body do not comply with the latest standards for new acquisitions—which is the reason for this sale. Ideal for fire brigades with a limited budget or for export.

Condition: new, Year of construction: 2026, color: grey, overall weight: 15,000 kg, maximum load weight: 13,000 kg, empty load weight: 2,010 kg, loading space volume: 13 m³, loading space width: 2,380 mm, loading space length: 7,000 mm, loading space height: 750 mm, gearing type: other, driver cabin: other, Vehicle location: en route / in transit, steel body, flap, lashing eyes Body: Roll-off container with drive-over rear flap, approx. 13 m³, spring-relieving, ARCHIVE IMAGES, roll-off container according to DIN 30722-1, external rollers lubricatable, floor 5 mm, walls made of 3 mm steel, spar spacing 750 mm, all-round tarpaulin and net hooks, zinc-plated ladder rungs according to UVV on the front, pivoting flap can be folded down and is spring-relieving, 8 x 2.5 tonne lashing eyes, 4 on each side wall and 2 x 5 tonne on the front wall, lashing eyes in the floor available at an extra cost, in RAL 7016 anthracite grey! Guedpfx Aasztftgofjf All information without guarantee, as the vehicle is en route! Available approximately from week 39-41. ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to changes, prior sale, and errors!

Condition: good (used), - 1pc. Jaw crusher Metso / Lokomo MK 120 . 1.200 x 900mm. With feed hopper . With motor . With spare parts : swing arm, flywheels, jaws, side wedges, bearings, springs etc. See PDF-file below for more detailed information. Gusdpfx Ajlf Iqcjafjf

Condition: ready for operation (used), Leading and feed spindle lathe Weiler Matador -Center distance: 500 mm -Center height: 140 mm -Feed range, longitudinal, via belt: 0.05–0.40 mm/rev -Feed range, longitudinal, via change gears: 0.018–0.800 mm/rev -Spindle head: Size 5 -Drive: Three-phase motor -Speed range: 15–3,550 rpm -Coolant pump -Collet chuck device -Wedge shank chuck Forkardt F 16 -Quick-change tool holder & Multifix -Work light -Chuck guard -Drill chuck -Follower rest -Machine feet -Documentation Gsdpfjztbfxjx Aafjuf Dimensions: L x W x H 1.5 x 0.6 x 1.2 meters / Weight 600 kg

Condition: ready for operation (used), Leading and feed spindle lathe Weiler Matador -Distance between centers: 500 mm -Swing over bed: 140 mm -Longitudinal feed range via belt: 0.05–0.40 mm/rev -Longitudinal feed range via change gears: 0.018–0.800 mm/rev -Spindle head: Size 5 -Drive: Three-phase motor -Speed range: 15–3,550 rpm -Coolant pump -Chuck guard -Forkardt F 160 three-jaw chuck with wedge shank Godpfx Ajztbbtoafsuf -Quick-change tool holder Multifix & insert -Drill chuck -Follower rest -Documentation Dimensions: L x W x H 1.5 x 0.6 x 1.2 meters / Weight 600 kg Errors and omissions excepted.

Condition: used, functionality: fully functional, Martin Surfacing Jointer 250 x 51 cm, 4.8 kW Motor Godpfsztz Hpex Aafouf 2 cutterhead shafts, wedge-shaped guide rails Re-sharpenable jointer knives Adjustable surfacing fence, swivels 90 - 45 degrees With Aigner miter gauge Chip removal 0 - 15 mm Dust extraction port 160 mm Motor brake with switch optional Weight 900 kg

Condition: used, Year of construction: 1992, functionality: fully functional, overall weight: 1,000 kg, Hofmann surface planer, 305 x 41 cm Planer width 41 cm Godpjztz Exefx Aafjuf Year of manufacture 1992 305 cm planer table length Planer fence, adjustable from 90 to 45 degrees 4 kW motor with brake 2 cutterblocks with wedges Resharpenable planer blades Includes 4 spare planer blades, 410 mm Maximum chip removal 10 mm Adjustment for rabbet and chamfer joints Dust extraction connection 140 mm Weight 1000 kg

Condition: good (used), Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws, interchangeable jaws, wedge bar chucks, interchangeable jaws, power chucks Guedpfxozlc E Ro Aafef -Top jaws: soft top jaws for wedge bar chucks, helical teeth, 1 set -Jaw width: 22 mm -Attachment: Material: Aluminum -Dimensions: see photo technical drawing -Transport dimensions: 270/95/H70 mm -Total weight: 2.5 kg

Condition: good (used), Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws, interchangeable jaws, wedge bar chucks, interchangeable jaws, power chucks Guodpfezlc Dmjx Aafof -Top jaws: soft top jaws for wedge bar chucks, helical teeth, 4 sets -Jaw width: 20 mm -Attachment: Material: Aluminum -Dimensions: see photo technical drawing -Submission/Price: complete -Transport dimensions: 350/300/H75 mm -Total weight: 9.2 kg