Used Weber Cf 2 for sale (111)

Year of construction: 1991, operating hours: 32,000 h, condition: refurbished (used), • One pair of original WEBER screws (excellent condition, including measurement report • One pair of non-original screws • Gearbox inspected and partially revised by WEBER • Control upgraded to WPS control Bsdpfowaxuasx Afmjdf • Output on PVC around 700 kg/hour

Condition: good (used), Year of construction: 1994, Model: NE 12 Screw type: Single screw Year of construction: 1994 Screw diameter: 130 mm L/D ratio: 30 L/D Drive power: 350 kW Including: • Machine was in production when dismantled • Machine was producing 710 mm pipes • Output on HDPE approximately 1,000 kg/hour • 800 mm extrusion head Bedpfjyxpbuox Afmodf

Condition: ready for operation (used), Year of construction: 1995, operating hours: 39,000 h, functionality: fully functional, Equipment: documentation/manual, A used and functional profile line for rigid PVC-profiles (300 x 100 mm), consisting of: Twin-screw extruder (parallel) Manufacturer: WEBER Type: DS 7.22 Bsdpfx Aoyx Dwkofmjdf Year of manufacture: 1995 Machine no.: DS70-043 Operating hours: 39,000 hours Screw diameter: 70 mm Effective screw length: 22 x D Screw geometry: for rigid PVC profiles Torque: 4,500 Nm per screw Screw speed: max. 40 rpm, continuously adjustable Drive motor: DC low-voltage motor, thyristor-controlled Drive power: approx. 25 kW Cylinder heating/cooling zones: 5/3 (air cooling with fan) Adapter heating zone: 1 Tool heating zones: 5 Control: conventional control with digital temperature controllers Degassing: Busch rotary vane vacuum pump (1.5 kW) Output capacity, max.: 120-150 kg/h for hard PVC, depending on material Connected load: approx. 50 kW (without tool) Special accessories: Mass temperature sensor and mass pressure sensor Adapter between extruder connection and extrusion tool Used tool set for a window profile (widening), consisting of: - Extrusion tool ‘widening’, incl. heating bands - Dry calibration - Vacuum tank approx. 2 m long, with 8 slots for calibration discs - 16 calibration discs Vacuum calibration unit Manufacturer: Uniplast / Greiner Type: CAL VAK 4P Year of manufacture: 1992 Machine number: K9209590 Total length: 6500 mm Vacuum pumps: 4 x Speck vacuum pumps (4.3 kW each) Water circulation pumps: 2 x Calpeda (1.1 kW each) Caterpillar haul-off, incl. attached saw Manufacturer: Uniplast / Greiner Type: CAT PUL 2D Year of manufacture: 1992 Machine number: R 9204546 Haul-off: Effective contact length: 2000 mm Pad width: 250 mm Haul-off force, max.: approx. 25000 N Speed range: approx. max. 10 m/min. Profile saw: HM circular saw blade: Ø 450 mm Profile cross-section, max.: approx. 300 x 100 mm Tilting table Manufacturer: Ide Type: ME N 52/2 Year of manufacture: 1994 Length: 6000 mm Support width: 270 mm Note: The complet profile line was overhauled in 2020 and has only been in operation for 325 hours since then.

Condition: excellent (used), WEBSITE HYDRAULIC RESCUE SET WEBER HYDRAULIK DIN 14800 H2 For sale: Professional hydraulic rescue set by WEBER HYDRAULIK, used in technical rescue operations by fire brigades, emergency services, and industry. The set includes: Bdedpfx Aoyxtcvsfmef - Manual hydraulic pump - 2 hydraulic cylinders / spreaders - Hydraulic hoses - End fittings, adapters, extensions - Spreading and supporting elements - Original transport case - Documentation as shown in the photos Technical data: Manufacturer: WEBER HYDRAULIK Set type: Hebesatz DIN 14800 H2 Working pressure: 630 bar Lifting force: 80 kN or 150 kN Condition: Used Condition: - Fully operational - Complete set as pictured - Normal signs of use, paint abrasions - Stored in transport case Additional information: - Professional equipment - Ideal for workshops, technical service providers, emergency services, or collectors - Shipping or personal pickup available

Year of construction: 1991, operating hours: 102,364 h, condition: good (used), This extrusion line from Hans Weber GmbH is in machine storage at Plastima Used Machinery. The line is from 1991 and is in used but good condition. - Brand: Hans Weber GmbH - Model: WEBER DS 6.5 Bedpfeqpft Isx Afmsdf - Year of construction: 1991 - Screw Ø: 65 mm - Working hours: 102.364

Condition: excellent (used), Year of construction: 1983, operating hours: 87,618 h, functionality: fully functional, machine/vehicle number: DS 85610, overall weight: 4,000 kg, total length: 5,200 mm, total width: 1,700 mm, total height: 2,500 mm, power: 75 kW (101.97 HP), input voltage: 380 V, input frequency: 50 Hz, input current: 160 A, Original WEBER 8.8 extruder with extended barrel to model 8.22. Comes with new and original screws from Weber. HMI control panel, previously used in a cleanroom environment. Includes hopper. Machine is offered as is. Bdedpfx Afox Apckjmof

Condition: used, Vibratory Feeder with Pneumatic Screwdriver Stand Eco Line Vibratory Feeder, Sorting Device, Bowl Feeder, Vibratory Bowl, Automatic Screwdriver WEBER Type ZSU 24 Machine No.: 1113212 Year of Manufacture: 2003 Vibratory Feeder WEBER ZSU 24 Bowl diameter: 240 mm Bowl internal height: 70 mm Sorting track width: 10 mm Power supply: 230 Volt, 50 Hz Operating pressure: 6 bar (for singulation and screws) Control voltage for pneumatic valves: 24 Volt - Controller for infinitely variable vibration speed = infinitely variable transport speed - Vibratory bowl in protective enclosure - With pneumatic feeding system - Feed impulse via external electrical control - The feeder was used for feeding screws M5 x 12 mm - Some pneumatic hoses need to be replaced - Siemens S7-200 CPU 224 PLC MISSING Space requirements vibratory bowl L x W x H: 450 x 450 x 315 mm Vibratory bowl weight: 32 kg WEVER Eco Line Screwdriver Stand Guide column: Ø 60 x 525 mm Height adjustment: 345 mm Primary stroke pneumatic cylinder 1 FESTO DZF-32-125-P-A-SM: 115 mm Screwdriver holder diameter: Ø 50 mm Secondary stroke pneumatic cylinder 2 FESTO: 30 mm Screwdriver guide diameter: Ø 37 mm Distance screwdriver guide to table: 135 - 465 mm - 1 piece flat cylinder FESTO, Type DZF-32-125-P-A-SM - 1 piece flat cylinder FESTO, Type probably DZF-32-30-P-A-SM - Screwdriver linear motion frame on linear guide - 3 position sensors on the cylinders - Festo pressure switch - Bosch pneumatic valve Screwdriver stand dimensions W x D x H: 200 x 410 x 1050 mm Screwdriver stand weight: 35 kg good condition Total weight vibratory feeder and screwdriver stand: 67 kg Attention: The original Siemens S7-200 CPU 224 PLC is missing (see picture control cabinet without PLC), therefore, an automatic process is not possible in this condition. Bsdpjxf Up Uefx Afmedf The control system also managed the separations of the screws and controlled the screwdriver itself. The vibratory bowl is fully functional even without the PLC, the built-in vibratory bowl controller does not require PLC control. Process: Fasteners are filled into the bowl in bulk and conveyed upward by mechanical vibration (micro-throw principle). The vibratory bowl is automatically switched on or off depending on the fill level of the screw magazine. The screw is then conveyed by compressed air through a plastic hose to the downstream device. The feed impulse for each individual screw is triggered externally by the downstream device.

Condition: good (used), Year of construction: 1990, loading capacity: 2.000 Kg. diameter of decoiler: 1.400 mm outside diameter of coil: max. 1.300 mm inside diameter of coil: min. 400 mm Bjdpfsid Sgmsx Afmedf hight of the coil: max. 800 mm

Year of construction: 2003, condition: ready for operation (used), A complete cheese cutting and portioning line with one slicer, one scale and conveyor units is available. Products: meat/cheese/sausage/vegan products, slice thickness range: 0.1mm-5mm, max. product length: 1200mm, max. cutting width: 360mm, blade type: circular blade, blade diameter: 460mm, cutting angle: 22°, max. weighing capacity: 100weighings/min, machine dimensions X/Y/Z: approx. 2500mm/1600mm/2300mm, weight: approx. 2000kg. Documentation available. An on-site inspection is possible. Bdsdjyx H E Depfx Afmef

Condition: used, For inquiries regarding the vibratory plate compactor, Mr. Herden will be pleased to assist you (by phone at ...). WEBER CR 8 CCD 2.0 Hatz Diesel Vibratory Plate Compactor / Brand New / In Stock & Immediately Available Sale price: €11,190.00 net / €13,316.10 gross 3-year warranty Shipping available. The reversible soil compactors of the CR series stand out for their powerful compaction performance and maximum efficiency. They are the first choice for compaction tasks ranging from classic road and civil engineering to paving projects. Well-balanced operational characteristics, high running smoothness, and low hand-arm vibrations ensure excellent operator comfort. CR 8 – The new top class: powerful, robust, and reliable in operation: - Infinitely variable forward and reverse travel - Hydraulic switching of the throttle cable and hydraulic switch protected within the guide bar - Low hand-arm vibrations - Fatigue-free operation thanks to height-adjustable guide bar - Machine and engine protection through a protective frame and full engine enclosure - Reduced maintenance thanks to self-tensioning centrifugal clutch - Easy servicing, as all maintenance components are easily accessible - Safe and quick loading thanks to a large, foldable lifting eye - Secure lashing for transport with additional lashing points on the engine console - Greater operating comfort due to electric start with operating hour meter, engine protection, and compaction control - Areas of application: road and civil engineering, trench work, sub-base for paving, and compaction of sand, gravel, or crushed stone Technical Data Engine: Hatz Diesel Max. engine output: 10.3 kW (14.1 hp) Weight: 605 kg Centrifugal force: 75 kN Frequency: 67.5 Hz Working width: 70 cm Upon request, we can also offer you attractive financing options. We are an official sales and service partner of Westtech. We are an official sales and service partner of Gierking GMT. We are an official sales and service partner of OilQuick. We are an official sales and service partner of Weber MT. We are an official sales and service partner of Holp. We are an official sales and service partner of DMS. We are an official sales and service partner of Seppi M. We are an official sales and service partner of Magni telehandlers. We are an official sales and service partner of JCB construction machinery. We are an official sales and service partner of Mercedes-Benz. We are an official sales and service partner of Iveco. In addition, with 800 used vehicles in stock, we are one of the largest commercial vehicle dealers in Germany. We supply the complete Weber MT product range! Errors and prior sale excepted. = More information = New: Yes Engine make: Hatz Bsdpfx Asym I Hqofmodf For more information, please contact Marius Herden.

Condition: used, For inquiries regarding the vibratory plate compactor, Mr. Herden is available to assist you by phone. Weber CR 6 WSA Hatz Diesel Vibratory Plate / Electric Start / Brand New / In Stock & Immediately Available Sales Price: €8,990.00 net / €10,698.10 gross 3-Year Manufacturer Warranty Technical Data Engine: Hatz Diesel Max. engine output: 7.9 kW (10.7 HP) Weight: 428 kg Centrifugal force: 55 kN Frequency: 72 Hz Working width: 59 cm Weber Smart Assist (WSA) - Evaluates signals from the sensors installed in the machine and displays them graphically using symbols - Similar to the previous engine protection from Weber MT, the engine shuts off whenever engine damage would be expected if operation continued - The user is also shown via symbols how to resolve any indicated faults Bdsdpfxjykhu Ne Afmsf - For a heavily soiled air filter, the cleaning and replacement procedure for the filter element is explained step by step - Weber Smart Assist also includes the COMPATROL compaction control, now presented with a new design - It provides the user with an easy-to-read and clearly understood bar graph display of the compaction progress - The machine operation is also new: once started, vibration is activated at the push of a button - There is no throttle lever, as the engine automatically adjusts to the correct speed The reversible soil compactors of the CR series stand out for their high compaction performance and top efficiency. They are the first choice for compaction work in classic road and civil engineering applications as well as paving. Balanced running properties, high smoothness, and low hand-arm vibrations ensure high operating comfort. CR 6 – Economical machine with strong compaction performance: - Infinitely variable forward and reverse travel. Hydraulic direction change - Throttle cable and hydraulic direction change are routed protected inside the guide bar - Low hand-arm vibrations - Fatigue-free operation with the height-adjustable guide handle - Protection for machine and engine through the engine guard frame and engine cover - Reduced maintenance effort thanks to the self-tensioning centrifugal clutch - Easy servicing, as all maintenance points are easily accessible - Safe and fast loading thanks to the large, foldable lifting eye - Secure lashing for transport with additional lashing eyes on the engine console - Enhanced operator convenience with electric start - Areas of application: road and civil engineering, paving, and thanks to its low height and working width, the CR 6 is also ideal for trench shoring We have a very large selection of different vibratory plates in stock and immediately available! Mr. Herden is happy to assist you by phone. On request, we can also provide you with a financing offer. We are an official Weber MT sales and service partner. We are an official Magni telescopic handler sales and service partner. We are an official Westtech sales and service partner. We are an official Gierking GMT sales and service partner. We are an official OilQuick sales and service partner. We are an official Holp sales and service partner. We are...

Condition: used, For inquiries regarding the vibratory plate compactor, please contact Mr. Herden (by phone). WEBER CR1-II Hd Honda Petrol Vibratory Plate Compactor / New machine / in stock & immediately available. Sales price: €2,890.00 net / €3,439.10 gross 3-year warranty Shipping available. Weber CR 1 Soil Compactor – The universally applicable entry-level model The reversible soil compactors of the CR series stand out with powerful compaction performance and maximum efficiency. They are therefore the first choice for compaction work ranging from conventional road and civil engineering to paving construction. Balanced operating characteristics, high running smoothness, and low hand-arm vibrations ensure excellent user comfort. Features - Infinitely variable forward and reverse movement - Precise operation thanks to hydraulic directional control - Low maintenance requirements due to self-tensioning centrifugal clutch - Robust tubular protection frame to prevent damage - Large, fixed lifting eye for quick loading, also by forklift Technical data Bjdpsymi H Sofx Afmodf Engine: Honda petrol Max. engine output: 2.6 (3.6) kW/HP Weight: 92 kg Centrifugal force: 15 kN Frequency: 100 Hz Working width: 35 cm Financing offers available upon request. We are official sales and service partners for: - Westtech - Gierking GMT - OilQuick - Weber MT - Holp - DMS - Seppi M. - Magni Telescopic Handlers - JCB Construction Machinery - Mercedes-Benz - Iveco With 800 used vehicles in stock, we are also one of the largest commercial vehicle dealers in Germany. We supply the entire Weber MT product range! Errors and intermediate sale reserved. = Further information = New: Yes Engine brand: Honda Contact Marius Herden for further details.

Condition: used, For enquiries regarding the vibratory plate, Mr. Herden will be happy to assist you (via phone). WEBER CR 7 CCD 2.0 Hatz Diesel Reversible Vibratory Plate / New unit / In stock & available immediately Sales price: €10,190.00 net / €12,126.10 gross 3-year warranty Shipping available. The reversible soil compactors of the CR series impress with their high compaction performance and maximum efficiency. They are the first choice for compaction work ranging from classic road and civil engineering to paving construction. Balanced running characteristics, high smoothness, and low hand-arm vibration ensure excellent operator comfort. CR 7 – Power and Comfort in Perfection: - Infinitely variable forward and reverse travel. Hydraulic direction change - Throttle and hydraulic control lines routed securely inside the guide bar - Low hand-arm vibrations - Fatigue-free operation with height-adjustable handle - Protection of machine and engine through protective frame and fully enclosed engine cover - Reduced maintenance due to self-tensioning centrifugal clutch - Easy servicing as all maintenance points are easily accessible - Safe and quick loading thanks to large, fold-down lifting eye - Secure lashing for transport with additional lashing points on the engine console - Increased operator convenience with electric start, hour meter, engine oil and battery voltage monitor - Areas of application: road and civil engineering, trench construction, landscaping, subbase for paving areas, settling pavers, and compacting sand, gravel or crushed stone COMPATROL® 2.0 Compaction Control: Bdjdoymv Shspfx Afmsf - COMPATROL® 2.0 enables uniform and comprehensive compaction - Weak points in the soil can be identified and rectified in time - User-friendly, self-explanatory LED display - Up to 25% time/cost savings due to reduced compaction passes Technical data: Engine: Hatz Diesel Max. engine output: 7.5 kW (10.3 HP) Weight: 477 kg Centrifugal force: 65 kN Frequency: 74 Hz Working width: 65 cm On request, we can also provide a financing offer. We are official dealer and service partner for Westtech, Gierking GMT, OilQuick, Weber MT, Holp, DMS, Seppi M., Magni telescopic handlers, JCB construction machines, Mercedes-Benz, and Iveco. Additionally, with 800 used vehicles in stock, we are one of the largest commercial vehicle dealers in Germany. We supply the complete Weber MT product range! Subject to prior sale and errors. = Additional information = Condition: New Engine make: Hatz Contact Marius Herden for further information.

Condition: used, For inquiries regarding the vibratory plate compactor, Mr. Herden will be happy to assist you (via phone). WEBER CR 9 Hatz Diesel Vibratory Plate Compactor / Brand new unit / In stock & immediately available. Sales price: €12,990.00 net / €15,458.10 gross 3-year warranty Bedjym I H Dspfx Afmedf Shipping available. The reversible soil compactors of the CR series stand out for their powerful compaction performance and maximum efficiency. They are the first choice for compaction jobs—from conventional road and civil engineering to paving applications. Balanced running characteristics, high smoothness of operation, and low hand-arm vibrations ensure excellent operator comfort. CR 9 – The new top class: powerful, robust, reliable: - Precise, stepless electrohydraulic control for forward and reverse travel with tip-switch operation - Throttle and hydraulic switching protected inside the guide handle - Low hand-arm vibrations - Fatigue-free operation thanks to height-adjustable handle - Protection for machine and engine via protective frame and fully enclosed engine cover - Reduced maintenance thanks to the self-tensioning centrifugal clutch - Easy servicing as all maintenance parts are easily accessible - Safe and quick loading with large, foldable lifting eye - Secure lashing for transport with additional lashing eyes on the engine console - Increased operator comfort with electric start, hour meter, engine oil, and battery voltage monitoring - Areas of application: road and civil engineering, trench compaction, landscaping, substructure for paving, setting paving and compacting sand, gravel, or crushed stone - With compaction control and engine protection Technical Specifications Engine: Hatz Diesel Max. engine power: 11.2 (15.3) kW/PS Weight: 740 kg Centrifugal force: 100 kN Frequency: 65 Hz Working width: 75 cm On request, we can also provide a financing offer. We are an official Westtech sales and service partner. We are an official Gierking GMT sales and service partner. We are an official OilQuick sales and service partner. We are an official Weber MT sales and service partner. We are an official Holp sales and service partner. We are an official DMS sales and service partner. We are an official Seppi M. sales and service partner. We are an official Magni telehandler sales and service partner. We are an official JCB construction equipment sales and service partner. We are an official Mercedes-Benz sales and service partner. We are an official Iveco sales and service partner. Additionally, with 800 used commercial vehicles, we are one of the largest commercial vehicle dealers in Germany. We supply the complete Weber MT product range! Subject to errors and prior sale. = More Information = New: Yes Engine brand: Hatz Please contact Marius Herden for further details.

Year of construction: 2000, condition: ready for operation (used), Line includes Slicer WEBER CCS 902, Pickler WEBER CCA and a grinding machine with a spare blade and spare parts. Bedpfx Asgmdr Uefmjdf

Condition: excellent (used), Weber MCS 902, CCA | Slicing Line – Slicer, Checkweigher, Discharge Conveyor Slicer Brand: Weber Model: MCS 902 Serial number: 1312 Power supply: 400 V / 50 Hz Power: 10 kW Dimensions: 2900 mm x 1400 mm x 2380 mm Bjdpey Hl Hvsfx Afmedf Checkweigher: Belt type: Plastic mesh Belt width: 360 mm Dimensions: 610 mm x 400 mm x 1020 mm Discharge conveyor Brand: Weber Model: CCA Serial number: 1312 Power supply: 400 V / 50 Hz Power: 7 kW Belt type: Plastic mesh Belt width: 295 mm Dimensions: 5350 mm x 1800 mm x 1700 mm The Weber MCS 902 industrial slicing line is a high-performance system designed for precise slicing of cold cuts, cheese, and meat products. The MCS 902 Slicer features advanced slicing technology, ensuring consistent slice thickness and minimizing raw material waste. The integrated checkweigher provides real-time portion weight monitoring for complete process control. The system is complemented by the CCA discharge conveyor, equipped with a hygienic mesh belt for smooth transfer of sliced product to subsequent packaging or processing stages.

Condition: as good as new (ex-display), All parts from picture come with machine. Bdodpografkofx Afmof

Condition: ready for operation (used), Year of construction: 2006, operating hours: 27,713 h, travel distance X-axis: 1,100 mm, travel distance Y-axis: 900 mm, travel distance Z-axis: 1,250 mm, controller manufacturer: SIEMENS, controller model: 840D, total height: 4,000 mm, total width: 6,000 mm, table load: 1,500 kg, overall weight: 12,000 kg, spindle speed (max.): 7,500 rpm, spindle motor power: 50,000 W, number of slots in tool magazine: 144, tool weight: 60,000 g, product length (max.): 6,000 mm, number of axes: 4, This 4-axis Burkhardt-Weber MCX750 M1 was manufactured in 2006. It features an impressive X-axis travel of 1100 mm, Y-axis travel of 900 mm, and Z-axis travel of 1250 mm. The machine has a maximum pallet load of 1500 kg and a magazine capacity of 144 positions. The machine is linked to a Burkhardt-Weber MCX750 M2 (2011) and a pallet magazine and set-up station (12 positions + 2 positions per machine + 2 set-up stations) Contact us for further details. Bodozl S T Dopfx Afmodf • Maintenance contract: Yes • Utilization: 70% • Shifts: 2 • Pallet size: 800 x 800 mm • Drive power: 50 kW • Maximum torque: 1650 Nm • Number of revolvers/magazines: 1 • Magazine capacity: 144 positions • Maximum tool length: 750 mm • Maximum tool diameter: 350 mm • Operating hours: 27713 h Additional equipment • OPTIONAL: Tooling package • Group 1: approx. 700–750 tools (Ø up to 124.9 mm) • Group 2: approx. 100–150 tools (Ø 125–224.9 mm) • Group 3: approx. 50 tools (Ø 225–350 mm)Recent replacement of the X-spindle and the rotary seal on the IKZ (internal cooling through spindle)Geometry readjusted(done by official Burkhardt-Weber)The machine is linked to a Burkhardt-Weber MCX750 M2 (2011) and a pallet magazine and set-up station (12 positions + 2 positions per machine + 2 set-up stations) Technical Specification Taper Size SK 50

Condition: good (used), Year of construction: 2000, Weber Assembly Table / Joining Station Heavy-duty industrial assembly table / joining station from the quality manufacturer WEBER Konstruktion Maschinenbau GmbH. The machine features an extremely robust mechanical design and is ideally suited for production facilities, workshops, or as a perfect base for a modernization project. Technical specifications (according to nameplate): Manufacturer: WEBER Konstruktion Maschinenbau GmbH (Aschaffenburg) Type: Assembly table Machine No.: BA 659 00 Year of manufacture: 08/2000 Electrical connection: 380 V (CEE plug included) Pneumatic connection: 6 bar "Everything from a single source: We would be happy to offer you suitable bank financing for your project." Bdedpfxjzni Rxj Afmjf komplett-konzept.leasingo.de You can find more items—both new and used—in our shop! International shipping costs available upon request!

Condition: ready for operation (used), total length: 2,050 mm, total width: 850 mm, total height: 1,350 mm, overall weight: 300 kg, WEBER desulphurizer. Type - ASB 1000 Belt dimensions - Length - 205cm. Width - 40cm. Bedpfx Aerq Dmcjfmedf Infeed - 90cm. Exit - 113cm. Roller width - 48cm. Total dimensions - Length - 205cm. Width - 85cm. Height - 135cm. Weight - 300kg. TJ.

Condition: good (used), Year of construction: 2011, functionality: fully functional, Universal machining center 5 axes simultaneously Original purchase price: EUR 1.295.000,- First machine installation in September 2011. A geometry measurement report (dated 30. August 2025) is available. Technical details x-travel 1600 mm y-travel 1250 mm z-travel 1600 mm B-axis (table) 360.000 x 0,001 deg milling-head swivable +/- (HV) 360.000 deg pallet size: 1000 x 800 mm table load 3000 kg tool taper SK 50-B plan design 125 spindle turning speed range max. 8000 rpm transmission ratio 2 spindle drive (100/40 % ED) 37/50 kW feeds x/y/z -stepless 30000 mm/min Bdjdpfszil R Dex Afmef max. torque on the spindle 1410/2000 (100/40 % ED) Nm total power requirement 100 kVA dimensions of the machine ca. 11555 x 7998 x 5050 mm Equipment: CNC-control Siemens 840D Solution Line Separate handheld control unit, wired, Siemens HT-2 2-station pallet changer with safety light barrier 110-position tool changer (max. tool length 600 mm) with 2nd Siemens 840 D control panel Tool taper cleaning system Special cabin with oil mist extraction system Coolant tank 3.300 liters, pump pressure 4 bar/50 bar (Q1/Q2) Chip conveyor Workpiece measuring probe Manual books Spare part: New ball screw. Note: The machine will be sold without tool holders, tools, and clamping devices.

Condition: ready for operation (used), Year of construction: 2016, A Burkhardt + Weber heavy-duty CNC large-format machining center is available. Axis travel X/Y/Z: 1600mm/1250mm/1250mm, tool interface: SK50, pallet dimensions X/Y: 800mm/1000mm, 125mm tool pockets: 95, 225mm tool pockets: 7, 350mm tool pockets: 5, 420mm beam tool pockets: 5, coolant system capacity: 1900l, control: Siemens 840D with ShopMill, operating hours: approx. 20000h. Including coolant system with paper band filter, machine enclosure, through-spindle coolant, external coolant nozzles, chip conveyor, dual-gripper tool changer and HV-NC swivel head. Documentation available. An on-site inspection is possible. Bdodpozp Rgqjfx Afmef

Condition: good (used), Rear axle, steering axle, forklift axle, steering cylinder, hydraulic cylinder, support cylinder, hydraulic ram, pressure ram, tilt cylinder, lifting cylinder, tie rod cylinder, tilt cylinder Bdjdpfx Ajv Tahiofmef -Manufacturer: Weber Hydraulik, hydraulic cylinder tilt cylinder stroke 110 mm -Type: Clark 4334896 -Piston rod: Ø 35 mm / M30 -Dimensions: Ø 88 x 420 mm -Weight: 8.7 kg

Condition: good (used), Hydraulic cylinder, support cylinder, hydraulic piston, pressure piston Bjdpfxsb A I His Afmsdf -single-acting cylinder -Cylinder: Ø 100 mm -Piston rod: Ø 48 / Ø 36 mm -Pipe outer diameter: mm -Stroke: 500 mm -Total length when retracted: 570 mm -Ideal for building a hydraulic press -Number: 8 available -Price: per piece -Weight: 10.5 kg/piece

Condition: good (used), Hand hydraulic pump, hand pump, hydraulic cylinder, hydraulic hand pump, high pressure pump, high pressure hand pump, hydraulic hand pump, hydraulic pump, hydraulic lifting kit -Manufacturer: Weber, hydraulic pump hand pump with cylinder -Pump: Type ERGS 40-150 -Pressure range: max. 650 bar -Cylinder: stroke 155 mm -Lifting capacity: 8 t -Hole: Ø 20 mm Bedpfxjw Dbkrs Afmedf -Quantity: 2x set available -Price: per set -Dimensions: 740/220/H140 mm -Weight: 11.1 kg/piece