Used Vertical Milling Head for sale (21,404)

Condition: good (used), Year of construction: 1972, functionality: fully functional, overall weight: 1,200 kg, x-travel: 290 mm y-travel: 170 mm z-travel: 310 mm Millung spindle number of milling spindle turning speeds: 16 milling spindle turning speeds: 40 - 2000 min-1 inner taper of milling spindle: ISO 40 max. diameter of the vice bore: 25 Vertical milling head inner taper of milling spindle: ISO 40 Hsdpfeyz Um Iex Afceff spindle turning speed range: 50 - 2.500 min-1 max. diameter of the vice bore: 25 dimensions: 1.100 x 1.100 x 1.660 mm

Condition: excellent (used), machine/vehicle number: 77WSX22305E5A-135, BENZ - MONO WSX 05 - 90° angle head Mounting: HSK-A100 Collet: ER25-A (clamping range: 0.5–16 mm) Max. torque: 30 Nm Max. speed: 8,000 min⁻¹ Transmission ratio: 1:1 Angle head: 360° adjustable Hodpfjyz Ugzjx Afcsff Weight: approx. 8 kg The angle head was used on a MAG HÜLLER HILLE - NBH6+ but can also be adapted or fitted to other machines.

Condition: used, Year of construction: 2002, travel -x axis 3.000 mm travel -y axis 560 mm travel -z axis 720 mm control Siemens - 840D number of spindle speeds 18.000 U/min numbers of positions in the tool changer 100 tool taper HSK 63 Milling machining centers - vertical | DMG - DMF 300 Linear The machine has exclusively processed aluminum is in a well-maintained condition and can be inspected at any time under power. Hjdpfxjy A Tb Hs Afcjff - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: DMF300Linear | DMF300 | DMF-300 Linear | DMF-300Linear

Condition: excellent (used), Year of construction: 2008, x-travel 800 mm Hfsdpfxjymqwxo Afcef y-travel 400 mm z-travel 500 mm Control Siemens table surface area 1270 x 320 mm spindle turning speed - stepless 0 - 6000 U/min distance spindle /table 100 - 600 mm throat 510 mm tool taper SK 40 weight of the machine ca. 2,7 t dimensions of the machine ca. 2,2 x 2,0 x 2,5 m

Condition: used, Year of construction: 2019, x-travel 1300 mm y-travel 670 mm z-travel 625 mm control Siemens Sinumerik 828D weight of the machine ca. 8500 kg Hfedpfeyzt Ansx Afcof

Condition: used, Year of construction: 2003, x-travel 660 mm y-travel 355 mm z-travel 455 mm table surface area 760 X 355 mm table load 1,5 t T-slots 3 T-slot - width 18 mm control ULTIMAX 4 Hodpjyy A Anofx Afcsff tool change unit 16 max. tool diameter 90 mm max. tool length 200 mm max. tool weight 7 kg spindle turning speed range 10.000 U/min spindle drive 7,5 kW 16 St. tool adaptor SK 40 feed max 28 m/min rapid traverse 35/35/30 m/min dimensions of the machine ca. 1,8 x 1,9 x 2,4 m weight 3 t total power requirement 21 kW Used vertical machining centre with double-arm tool changer. HURO ULTIMAX 4 CONTROL 10,000 RPM

Condition: used, Year of construction: 2017, x-travel 350 mm Hfedpfsyzi N Rex Afcjf y-travel 550 mm z-travel 510 mm c-axis 360 0 a-axis -120/+30 0 control Mazatrol SmoothG weight of the machine ca. 7100 kg

Condition: as good as new (ex-display), 1 unused universal milling head for retrofitting to conventional, NC or CNC milling machines or boring mills of any kind, "HURON" system, swivels over 2 axes, every angle adjustable. Spindle taper: ISO 40 Reach approx. 360 mm Designed drive power: 10 HP Max. speed: 1,800 rpm Weight: approx. 82 kg Accessories / Special features: • Manual tool clamping Hfodpfxjdbny Es Afcjf • Main spindle and all shafts and gears made of case-hardened and tempered chrome-nickel steel • 2 rotatable axes making every setting angle possible! "HURON" system • Tapered drives ground according to "KLINGELNBERG" system • Main spindle bearings made of high-precision tapered roller bearings • 1 tool drawbar • Operating manual Delivery time: immediate, subject to prior sale Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Condition: good (used), x-travel 380 mm z-travel 140 mm dist. cutter spindle - workpiece spindle 370 mm distance spindle - column 163 mm table-size 630 x 150 mm quill stroke 40 mm Hedpjyz Dg Defx Afceff milling head -swivable 360 Grad spindle turning speed range 120-2000 U/min table feed 35/65/170 mm/min voltage 380 V weight of the machine ca. 130 kg total power requirement 0,5 kW dimensions of the machine ca. 0,91 x , 0,68 x 1,80 m Includes 32-piece collet set Includes base cabinet with key Includes small parts Includes operating instructions

Condition: used, Year of construction: 2013, x-travel 1.135 mm y-travel 1.050 mm z-travel 750 mm control iTNC 530 Heidenhain turning speed range - main spindle max. 14.000 min/-1 power capacity - main spindel 19 kW max. Torque 100 Nm tool taper HSK-A 63 table surface area 1.400 x 1.050 mm max. table load 2.500 kg max. workpiece sizes 1.400 x 1.240 mm max. workpiece height 750 mm number of toolpositions 30 pos. tool taper HSK-A 63 max. tool diameter 80 mm max. tool-dia with free toolbox 160 mm max. tool length 365 / 395 mm max. tool weight 8,0 kg change-time chip to chip 6,1 sec feed speeds max. 40.000 mm/min rapid traverse 40 m/min Accelaration 6 m/s² Feed force ( X / Y / Z ) 14 / 20 / 14 kN total power requirement 44 kVA weight of the machine ca. 14,4 t dimensions of the machine ca. 6,0 x 5,0 x 3,3 m CNC - MachiningCenter Vertical DMG MORI SEIKI - DMU 105 monoBLOCK - Spindle hours: approx. 9,518 h - Production package: (Chip conveyor, 600 l coolant system, paper belt filter, internal coolant supply 40 bar / 23 l/min through spindle center) - Air Clear: Air curtain for viewing window Hjdpfx Afsyztyajceff

Condition: used, Year of construction: 2000, x-travel 1.050 mm y-travel 560 mm z-travel 450 mm Control OKUMA OSP-U100M-H table dimensions 1.300 x 560 mm spindle tunring speed 10.000 U/min tool taper BT 40 Hsdpoyxhiwofx Afcoff In our assessment, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools, and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Technical data and specifications are subject to change without notice and errors. Prior sale is reserved.

Condition: used, Year of construction: 2016, x-travel 610 mm y-travel 510 mm z-travel 610 mm Control MAX5 distance spindle /table 150 - 760 mm Hfsdeyxhiqopfx Afcof table surface area 760 x 510 mm T-slots (number x width x distance) 5 x 18 H8 x 100 mm table load 1.360 kg number of spindle speeds 12.000 spindle drive 9 kW torque 95 Nm tool taper SK-A 40 number of tool places 30 Pos. tool diameter 80 mm Tool diameter with free secondary positions 130 mm tool length - max. 300 mm weight of tools 7 kg auto power on hours ca. 17.626 h spindle hours ca. 900 h In our assessment, the machine is in good used condition and can be inspected under power by appointment. The main spindle was replaced a year ago. Accessories, tools, and clamping devices shown are only included if explicitly stated in the additional information. Technical data and specifications are subject to change without notice. Prior sale is reserved.

Condition: used, Year of construction: 2019, x-travel 660 mm y-travel 406 mm z-travel 508 mm Control MAX5 distance spindle /table 102 - 610 mm table surface area 762 x 406 mm T-slots (number x width x distance) 3 x 18 H8 x 100 mm table load 682 kg spindle tunring speed 12.000 U/min spindle drive 11 kW torque 61 Nm tool taper SK 40 number of tool places 20 Pos. tool diameter 89 mm Tool diameter with free secondary positions 127 mm tool length - max. 250 mm weight of tools 7 kg Hjdpfx Ajyw Tncjfcsff spindle hours ca. 1.664 h In our assessment, the machine is in good used condition and can be inspected under power by appointment. Technical features & accessories: - Electronic handwheel - Synchronous thread cutting - Internal coolant supply 20 bar Accessories, tools, and clamping devices shown are only included in the scope of delivery if specifically stated in the additional information. Technical data and specifications are subject to change without notice. Prior sale is reserved.

Condition: used, Year of construction: 2016, x-travel 1.020 mm y-travel 700 mm z-travel 500 mm Control Siemens 828D table dimensions 1.050 x 700 mm spindle tunring speed 15.000 U/min tool taper BBT-40 In our assessment, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools, and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Technical data and specifications are subject to change without notice and errors. Prior sale is reserved. Hfjdjyw Tm Eopfx Afcjf

Year of construction: 1972, condition: excellent (used), machine/vehicle number: 2995, table mounting size: 300 x 1100 mm movement x: 780 mm movement y: 250 mm movement z: 410 mm spindle taper: SK 40 tailstock stroke: 100 mm spindle turning speed range: 31,5 - 1400 rpm carriages longitudinal and cross: 12,5 - 630 mm/min carriages vertical: 6,3 - 315 mm/min electrical connection: 380 V, 5,5 kW space needed: 1770 x 1500 x 2050 mm weight: ca. 2200 kg Hfjdpfsh I Du Ujx Afcof

Condition: used, Year of construction: 2023, x-travel 3000 mm y-travel 820 mm z-travel 720 mm Control Mazatrol Smooth G spindle taper SK 40 spindle turning speed range 35 - 12.000 U/min spindle motor 15 kW distance spindle centre table top edge 140 - 860 mm table load 2500 Kg rapid travel x/y/z 50 m/min table width 3500 mm table length 820 mm table height over floor 870 mm T-slots 7 T-slot - width 18 mm T-slot - distance 100 mm tool change unit 48 tool changing time 4,7 sec wotkpiece diameter with 2 vacant positions 130 mm workpiece diameter at full load 80 mm max. tool weight 8 kg tool length - max. 350 mm air pressure - required 5 - 9 bar Air volume 260 l/min electrics - voltage/frequency 400 / 50 V/Hz coolant tank 500 l total power requirement 46,7 kW weight of the machine ca. 15,4 t dimensions of the machine ca. 5,3 x 3,6 x 3,3 m Standard machine including the following optional extras: - Provision for dual oil mist extraction - Air cooling via the rotating milling spindle - 48-tool magazine - Pulse handwheel - 3-colour LED signal light - Additional work area lighting - Air blow-off device on the milling spindle - High-pressure coolant supply through the spindle (15 bar) - Provision for MAZAK Monitoring - Chip conveyor with left-hand ejection (Crowther) - Manual grease gun - Grease cartridge - Mazak API - Drilling cycle with automatic chip breaking - Synchronous thread cutting - Rapid traverse with constant angle of inclination STANDARD ACCESSORIES Adaptation for the European market USB port (1 port) Mazak standard colour Work area lighting SAFETY FEATURES Operator door with interlock switch Work area cladding The splash guard enclosure encloses the work area from the side. Fully enclosed work area Protection against chips, coolant and access to the work area during automatic machining. Safety precautions in accordance with global standards COOLANT SUPPLY Coolant supply via spindle (pump pressure = 5 bar) Complete coolant system includes pumps, valves, pipework and nozzles for the efficient production of high-quality components. FACTORY AUTOMATION Automatic start/stop and warm-up function Automatic activation of a warm-up via digital timer MEASURING SYSTEM Tool length measurement and tool breakage detection NUMERICAL CONTROL Horizontally adjustable NC control panel Relocation Detector Mazatrol SmoothG control 19" colour LCD screen (touch screen) Mazak Tornado tapping/drilling cycle (Mazatrol) EIA/ISO input function Tool path verification in the background 3D coordinate conversion Shape compensation for rotating axes Hfjdpfxeyvvluo Afcjf Mazacc-2D software (contour correction) Mazacc-3D software package MAZACC-3D high-speed software package (NO456) is additionally required. Control system with high smoothing Interface for LAN SD memory card interface Smooth Standard Software for M/C - NO443 B) MAZACC-2D software (workpiece shape compensation) - NO444 D) MAZACC-3D high-speed software package - NO445 B) Shape compensation for rotating axes - NO497 D) High-precision control for finishing - Seamless corner point control - Variable acceleration control - Ultra-high-speed machining mode - NO498 Rapid traverse paths, rounding function Absolute positioning system - All dimensions, weights and performance specifications are subject to change - - Used machine without warranty - - Subject to prior sale -

Condition: used, Year of construction: 2001, x-travel 550 mm Hodpfx Ajynnu Dsfcoff y-travel 500 mm z-travel 400 mm Control Siemens spindle tunring speed 12.000 U/min table surface area 1050 x 450 mm table load 500 kg In our opinion, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Subject to changes and errors in the technical data and information as well as prior sale!

Condition: used, Year of construction: 2022, x-travel 1.650 mm y-travel 850 mm z-travel 900 mm Control Heidenhain TNC 640 spindle tunring speed 6.000 U/min power capacity 37 / 20 kW Torque (40/100%): 824 / 549 Nm tool taper SK 50 number of tool places 24 Pos. In our assessment, the machine is in good used condition and can be inspected under power by appointment. Hedpoykb Ipefx Afcoff Technical features & accessories: - Internal coolant supply - Table cleaning system - Infrared workpiece measurement, Heidenhein TS-460 with breakage monitoring - 4th axis, Tsudakoma RWA-250L-SM - Three-jaw chuck Ø250 mm - Extraction system - 2-stage gearbox - Chip conveyor Accessories, tools, and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Technical data and specifications are subject to change without notice. Prior sale is reserved.

Condition: used, Year of construction: 2010, x-travel 508 mm y-travel 356 mm z-travel 508 mm table dimensions 508 x 324 mm spindle tunring speed 10.000 U/min Tool cone CAT 40 spindle drive 15 kW tool magazine 24 Stationen rapid traverse 25,4 m/min feed 18,03 m/min weight 6,5 t In our opinion, the machine is in good used condition and can be inspected condition and can be inspected under power by appointment. Operating hours approx. 20,851 hours Hedpfx Afoxyafwjcjff Accessories, illustrated tools and clamping devices are only included in the scope of delivery if this is noted in the additional information . Changes and errors in the technical data and information as well as prior sale reserved. subject to prior sale

Condition: used, Year of construction: 1996, x-travel 700 mm y-travel 320 mm z-travel 270 mm turning speed range - main spindle 10 - 10.000 min/-1 drive capacity - main spindle 5 kW tool taper ISO 30 / MAS-BT table surface area 800 x 300 mm table load capacity 300 kg distance spindle /table 450 mm rapid traverse ( x / y / z ) 30 m/min Feed ( x / y / z) 5 - 10.000 mm/min Hfsdpfx Asxddvbefcef number of tool places 14 Pos. tool diameter 80 mm tool length - max. 200 mm weight of tools max. 3 (gesamt 25) kg Overall size 1830 x 2950 x 2410 mm total power requirement 9 kVA The machine is defective and is being sold as a spare parts carrier. The extraction system is NOT included in the scope of delivery. Accessories, tools, and clamping devices shown are only included in the scope of delivery if noted in the additional information. Subject to changes and errors in the technical specifications and information, as well as subject to prior sale!

Condition: used, Year of construction: 2001, x-travel 660 mm y-travel 460 mm z-travel 500 mm table dimensions 940 x 460 mm Control Yasnac J300 Hfsdpfjxxmmrsx Afcjf spindle tunring speed 12.000 U/min tool taper BT 40 number of tool places 30 Pos. In our assessment, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools, and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Technical data and specifications are subject to change without notice. Prior sale is reserved.

Condition: used, Year of construction: 2008, x-travel 600 mm y-travel 450 mm z-travel 300 mm spindle tunring speed 42.000 U/min In our opinion, the machine is in good used condition and can be inspected under power by appointment. Equipment: - Extraction system, Keller - Pallet system, Röders RC 2 Accessories, tools and clamping devices shown are only included in the scope Hodpsx Iwg Dofx Afcoff of delivery if this is noted in the additional information. Subject to changes and errors in the technical data and information as well as prior sale!

Condition: used, Year of construction: 1995, x-travel 650 mm y-travel 410 mm z-travel 410 mm Control Mitsubishi Meldas 50 M max. turning speeds 6.000 min/-1 tool taper SK 40 In our opinion, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Hfjdpfx Aox Iwg Rsfcsf Subject to changes and errors in the technical data and information as well as prior sale!

Condition: used, Year of construction: 2001, x-travel 300 mm y-travel 250 mm z-travel 251 mm Control Fanuc 16iMB max. turning speeds 15.000 min/-1 tool taper HSK-A 32 number of tool places 12 Pos. In our opinion, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools, and clamping devices shown are only included in the scope of delivery if noted in the additional information. Subject to changes and errors in the technical data and information, as well as subject to prior sale! Hfedpfx Aowth Sbefcof

Condition: used, Year of construction: 2006, x-travel 1.100 mm y-travel 600 mm z-travel 560 mm Control Heidenhain iTNC 530 spindle tunring speed 12.000 U/min tool taper SK 40 number of tool places 40 Pos. Hedpfx Ajytybyjfcjff weight of the machine ca. 7,4 t Number of working hours ca. 49.792 h In our assessment, the machine is in good used condition and can be inspected under power by appointment. Technical features & accessories: - Chip conveyor - 4th axis preparation - Internal coolant supply Accessories, tools, and clamping devices shown are only included if specifically stated in the additional information. Technical data and specifications are subject to change without notice. Prior sale is reserved.