Milling machining centers - vertical
MAZAK VTC-820/30

Name: MAZAK VTC-820/30
Brand: MAZAK
Availability: InStock

Year of construction

2023

Condition

Used

Location

Bremen

Milling machining centers - vertical MAZAK VTC-820/30

Basic data

Machine type:: Milling machining centers - vertical

Manufacturer:: MAZAK

Model:: VTC-820/30

Year of construction:: 2023

Condition:: used

Price & Location

Location:: Bremen

Call

Details about the offer

Listing ID:: A21546288

Reference number:: 1023-1140781

Update:: 19.03.2026

Description

x-travel 3000 mm
y-travel 820 mm
z-travel 720 mm
Control Mazatrol Smooth G
spindle taper SK 40
spindle turning speed range 35 - 12.000 U/min
spindle motor 15 kW
distance spindle centre table top edge 140 - 860 mm
table load 2500 Kg
rapid travel x/y/z 50 m/min
table width 3500 mm
table length 820 mm
table height over floor 870 mm
T-slots 7
T-slot - width 18 mm
T-slot - distance 100 mm
tool change unit 48
tool changing time 4,7 sec
wotkpiece diameter with 2 vacant positions 130 mm
workpiece diameter at full load 80 mm
max. tool weight 8 kg
tool length - max. 350 mm
air pressure - required 5 - 9 bar
Air volume 260 l/min
electrics - voltage/frequency 400 / 50 V/Hz
coolant tank 500 l
total power requirement 46,7 kW
weight of the machine ca. 15,4 t
dimensions of the machine ca. 5,3 x 3,6 x 3,3 m
Standard machine including the following optional extras:
- Provision for dual oil mist extraction
- Air cooling via the rotating milling spindle
- 48-tool magazine
- Pulse handwheel
- 3-colour LED signal light
- Additional work area lighting
- Air blow-off device on the milling spindle
- High-pressure coolant supply through the spindle (15 bar)
- Provision for MAZAK Monitoring
- Chip conveyor with left-hand ejection (Crowther)
- Manual grease gun
- Grease cartridge
- Mazak API
- Drilling cycle with automatic chip breaking
- Synchronous thread cutting
- Rapid traverse with constant angle of inclination

STANDARD ACCESSORIES
Adaptation for the European market
USB port (1 port)
Mazak standard colour
Work area lighting

SAFETY FEATURES
Operator door with interlock switch
Work area cladding
The splash guard enclosure encloses the work area from the side.
Fully enclosed work area
Protection against chips, coolant and access to the work area during
automatic machining.
Safety precautions in accordance with global standards

COOLANT SUPPLY
Coolant supply via spindle (pump pressure = 5 bar)
Complete coolant system includes pumps, valves, pipework and nozzles
for the efficient production of high-quality components.

FACTORY AUTOMATION
Automatic start/stop and warm-up function
Gjdpfx Aieyvvluevekc
Automatic activation of a warm-up via digital timer

MEASURING SYSTEM
Tool length measurement and tool breakage detection

NUMERICAL CONTROL
Horizontally adjustable NC control panel
Relocation Detector
Mazatrol SmoothG control
19" colour LCD screen (touch screen)
Mazak Tornado tapping/drilling cycle (Mazatrol)
EIA/ISO input function
Tool path verification in the background
3D coordinate conversion
Shape compensation for rotating axes
Mazacc-2D software (contour correction)
Mazacc-3D software package
MAZACC-3D high-speed software package (NO456) is additionally required.
Control system with high smoothing
Interface for LAN
SD memory card interface
Smooth Standard Software for M/C
- NO443 B) MAZACC-2D software (workpiece shape compensation)
- NO444 D) MAZACC-3D high-speed software package
- NO445 B) Shape compensation for rotating axes
- NO497 D) High-precision control for finishing
- Seamless corner point control
- Variable acceleration control
- Ultra-high-speed machining mode
- NO498 Rapid traverse paths, rounding function
Absolute positioning system

- All dimensions, weights and performance specifications are subject to change -

- Used machine without warranty -

- Subject to prior sale -

Seller

Registered since: 2004

9 listings online

Call

Send inquiry

Telephone & Fax

+49 421 4... show

+49 421 3... show

Fax:

These listings may also fit your interest.

Listing

Eskilstuna

1,651 km

2012 Mazak VTC-820/30
MazakVTC-820/30

Call

Condition: used, Year of construction: 2012, Mazak VTC-820/30 – specification Overview - Brand: Mazak - Model: VTC-820/30 - Year model: 2012 - Location: Eskilstuna Control system - Mazatrol Matrix Nexus Movements - Number of axis: 4 (X, Y, Z + 4th shaft) - X-axis: 3.000 mm - Y-axis: 820 mm - Z-axis: 720 mm - Fast transport: 50 m/min - Distance spindle nose to table: 140–860 mm Spindle and tool - Spindle effect: 22 kW - Spindle RPM: 12,000 rpm - Spindelkona: CAT 40 - Tool changer: 30 positions - Cutting fluid through the spindle: 15 bar Table - Table size: 3,500 × 820 mm - Max table load: 2,500 kg - T-slots: 7 pcs, 18 mm, pitch 100 mm Gkedpfez N An Eox Aivoc 4th axle - Round Feeding Table Mazak DS50C-R1-Z, Ø 500 mm, with Roller Gear Cam - Vertical mounting on angle shelf Mazak MAZ 80090X Dimensions and weight - Machine depth: 3,700 mm - Machine height: 3,050 mm - Machine weight: 16,100 kg Equipment - Renishaw tool breakage control TRS2 - Shavings conveyor to the left, lamella conveyor with timer relay - Cutting fluid through the spindle, 15 bar - Manual rinsing nozzle - Portable pulse generator (handheld) for shoulder movements - Automatic power shutdown at end of program - 3 extra M-functions (1 pair) - Robot interface, Ethernet/IP slave - Automatic doors

See details

Listing

Vertical machining center Deckel Maho DMF 250 linear

Eschborn

1,211 km

Vertical machining center
Deckel MahoDMF 250 linear

Call

Condition: excellent (used), Year of construction: 2006, • Configuration: 3 linear axes (X/Y/Z) + B-axis tilting head • Travels (X/Y/Z): 2,500 / 920 / 820 mm • Table: 3.100 × 900 mm · max load 3.000 kg • Spindle: 20–18.000 rpm · HSK-A63 · 35/25 kW • Rapids: X 100 m/min · Y/Z 60 m/min • Tool magazine: 120 tools • Control: HEIDENHAIN iTNC 530 Godpfx Aisy Skmrjvjkc Brand new Spindle installed as end of April 2026

See details

Listing

Stawiec

1,733 km

Compressor
CeccatoCSA15/10

Call

Year of construction: 2022, condition: new, CECCATO 11Kw SCREW COMPRESSOR, 2022, NEW NEW screw compressor!!! CECCATO CSA15/10 G2 (ATLAS COPCO screw stage). Technical specifications: Capacity: 1.40 m3/min; 11 kW motor; Pressure: 10 bar Gksdeiphyajpfx Aivec Year of manufacture: 2022 Operating hours: 0!!! Fully functional, NEW compressor!! We provide service support.

See details

Listing

Vertical machining center HERMLE C 800 U

Bochum

1,070 km

Vertical machining center
HERMLEC 800 U

Call

Condition: good (used), Year of construction: 1996, functionality: fully functional, Work area: 800x600x500 Rapid traverse rate: 30 m/min Gkjdpfxozv Syfe Aivec Spindle speed: 15000 RPM, SK40 NC rotary table, diameter = 280 mm Electronic handwheel module Electrical thermal expansion compensation Ethernet interface, TNC 426/430 Measuring probe system, SK40, Renishaw Chip conveyor without chip cart Enclosed cabin roof section Air blow-off device, C800 The spindle was replaced in May 2018 with a total operating time of 25,185 hours. The current operating time is 31,083 hours. This means that the spindle has been in operation for 5,898 hours since its replacement.

See details

Listing

Vertical machining center HURCO VMX60 SRTI

Contamine-sur-Arve

1,321 km

Vertical machining center
HURCOVMX60 SRTI

Call

Condition: used, TECHNICAL DETAILS - Number of axes : 5 MILLING SPINDLE - Tool holder type : BT40 - Spindle power : 36.5 [kW] - Spindle speeds : 12000 [rpm] - B Rotary Axis : 90 [°] (+/-) LINEAR AXES - Travels on X/Y/Z axes : 1525 / 660 / 610 [mm] - Rapid traverses rates (X/Y/Z) : 32 / 32 / 24 [mm/min] TOOL CHANGER - Auto. Tool Changer type : Bras chargeur - Tool magazine capacity : 40 TABLE - Table dimensions : 1680 x 660 [mm] - Distance table / spindle nose (min./max.) : 12.7 - 622.3 [mm] - Maximum weight upon table : 1360 [kg] Gkodpey Tzc Hsfx Aivoc - Diameter of the C-type rotary table : 600 [mm] - Travel : 360 [°] - Maximum load on the rotary table : 500 [kg] POWER SUPPLY - Supply voltage : 400 [V] - Total installed power : 69 [kVA] WEIGHT & DIMENSIONS - Machine weight : 9.800 [kg] EQUIPMENT - CNC : WinMax / MAX5 - Electronic handwheel - Coolant tank * with high-pressure pump - Coolant through spindle - Chips conveyor - Spindle cooling unit - Tool probe

See details

Listing

Surface Grinding Machine - Horizontal ELB-Schliff SWN 8 ND

Malsch

1,258 km

Surface Grinding Machine - Horizontal
ELB-SchliffSWN 8 ND

Call

Condition: excellent (used), Year of construction: 1986, grinding length 800 mm grinding width 375 mm workpiece height 375 mm magnetic clamping plate, electical 900 x 300 mm spindle turning speed range 1500 - 3000 U/min table surface area 1550 x 370 mm table longitudinal travel 100 - 1000 mm max. workpiece weight 350 kg dimensions of grinding wheel 300 x 50 mm total power requirement 9 kW weight of the machine ca. 4,6 t Gkedpjunt Iuefx Aivec dimensions of the machine ca. 4,0 x 2,3 x 2,6 m

See details

Listing

Contamine-sur-Arve

1,321 km

CNC lathe
OKUMAL300-MW

Call

Condition: used, TECHNICAL DETAILS - Number of spindles : 2 - Number of axes : 4 MAIN SPINDLE - Spindle nose : A2-8 - Spindle speeds : 3000 [rpm] - Max. bar diameter : 80 [mm] - Max. turning diameter : 300 [mm] - Max. diameter on bench : 520 [mm] - C axis indexing precision : 0.001 [°] COUNTER-SPINDLE - Spindle speeds : 6000 [rpm] - Max. bar diameter : 53 [mm] - C axis indexing precision : 0.001 [°] - Travel : 520 [mm] TURRET - Number of positions : 12 - X/Z stroke : 230 / 460 [mm] - Live tools speed : 4500 [rpm] POWER SUPPLY - Supply voltage : 400 [V] - Total installed power : 22.5 [kVA] WEIGHT & DIMENSIONS Gsdpfx Ajuhbnnsivokc - Machine floor space : 3050 x 1860 [mm] - Machine height : 1.850 [mm] - Machine weight : 5500 [kg] EQUIPMENT - CNC : OSP-P300L-R - Coolant tank * with high-pressure pump - Chips conveyor - Parts catcher - Parts conveying strip - Bar loader : Top Automation FU352 - Fire extinguisher * * NB : working order not guaranteed. To have it checked by a qualified organization of the buyer.

See details

Listing

CNC turning and milling center - 5-axis DMG DMC 210 FD

Halberstadt

1,309 km

CNC turning and milling center - 5-axis
DMGDMC 210 FD

Call

Condition: good (used), Year of construction: 2010, Ref. -No.: 10287 Manufacturer: DMG Type: DMC 210 FD Year of construction: 2010 Type of control: CNC-Steuerung Control: Heidenhain Mill Plus Storage location: Halberstadt Country of origin: Deutschland X-Travel: 2100 mm Y-Travel: 2100 mm Z-Travel: 1250 mm Machine length: 11.000 mm Machine width: 5.000 mm Machine Height: 3.500 mm Max. Workpiece diameter: 2500 mm Max. Workpiece Weight: 6.000 kg Max. rotary table diameter: 1.850 O Table speed range: 250 min/-1 Tool Taper: HSK-A100 Tool Piece Magazine With: 183 Pcs./pcs. Gjdpfx Aezkpupsivokc Spindle Speed: 12.000 RPM Max. Torque On The Boring Spindle: 288 Nm Max. Torque: 2.000 Nm Feed Speeds X/Y/Z Axis: 30.000 mm / min Max. Workpiece height: 1.460 mm axes: 5 Further information: Turning and milling center incl. pallet changing system Gear spindle Coolant treatment system, with belt filter, 710 x 50mm 1 Knoll 600S2 chip conveyor 2 Losma oil mist extraction units 1 steel platform (storage space for clamping device): 5,300 x 2,900 mm - Axes renewed 11.2024 - New encoder, electrical components renewed - Geometry protocols available Machine is still in production and under power. The machine can be viewed at any time by appointment.

See details

Listing

Portal - Machining Center DROOP + REIN FOGS 40 60 C

Germany

1,100 km

Portal - Machining Center
DROOP + REINFOGS 40 60 C

Call

Condition: used, Year of construction: 2016, x-axis 6.800 mm y-axis 4.000 mm z-axis 1.500 mm Control iTNC 530 HSCI Heidenhain distance between columns max. 5.090 mm Gsdozf Nn Sjpfx Aivjkc distance spindle center to table 1.825 mm type 175149A-0007 turning speed range - main spindle max. 19.800 min/-1 power capacity - main spindel 20 kW tool taper HSK-A63 swivellable B: +115° / -115 ° rotatable C: +/- 200 ° type 178099-0005 turning speed range - main spindle max. 10.020 min/-1 power capacity - main spindel 20 kW tool taper HSK-A100 swivellable B: +115° / -115 ° rotatable C: +/- 200 ° table surface area 6.000 x 3.000 mm max. table load 50,0 t height over floor 100 mm number of T-slots 12 T-slot - width 28H12 mm T-slot - distance 250 mm number of toolpositions 62 (38+24) pos. number of toolpositions HSK A63: 37+1 pos. number of toolpositions HSK A100: 23+1 pos. max. tool diameter HSK A63: 52 mm max. tool length HSK A63: 250 mm max. tool weight HSK A63: - kg max. tool diameter HSK A100: 80 mm max. tool length HSK A100: 450 mm max. tool weight HSK A100: - kg rapid traverse ( X / Y / Z ) 40.000 mm/min rapid traverse B/C: 4.320 °/min feed speeds X/Y/Z: 30.000 mm/min Working speed B/C: 2.160 °/min Accelaration max. 3,2 m/s² x-axis 6.800 mm y-axis 4.000 mm z-axis 1.500 mm b-axis +115° / -115 ° c-axis +/- 200 ° total power requirement 180 kVA dimensions of the machine ca. 12,5 x 15,0 x 7,0 m 5-Axis-High-Speed-Gantry-Big-Machining-Center DROOP & REIN - FOGS 40 60 C - Fork head

See details

Listing

Gear Hobbing Machine - Vertical GLEASON- PFAUTER P 1600

Germany

1,100 km

Gear Hobbing Machine - Vertical
GLEASON- PFAUTERP 1600

Call

Condition: used, Year of construction: 2007, x-travel 900 mm y-travel 300 mm z-travel 1000 mm control Siemens Sinumerik 840D Gkjdpfxsw Rrb Hj Aivec max. workpiece diameter 1600 mm max. module 20 mm tip circle diameter 350 mm Milling arbour diameter 375 mm Total closing value 80 kVa weight of the machine ca. 33,5 t dimensions of the machine ca. 10,530 x 6,375 x 4,680 m Feed rate: - X-axis 1 to 3000 mm/min - Y-axis 1 to 3000 mm/min - Z-axis 1 to 4000 mm/min Spindle speeds in rpm: - Tool 26 to 265 - Workpiece table 0 to 8 Equipment/accessories: - M 2 motor milling head - Milling mandrels - Oil cooler - Technical documentation

See details

Advertise here