Used Vertical Lathe Cnc for sale (16,778)

Condition: ready for operation (used), total height: 3,600 mm, empty load weight: 22,000 kg, Schiess Ø 2070 x H 1330 mm Dkjdpfjxuwyhsx Af Isw Chuck dia.: Ø 1700 mm Max turningdia -- passage: Ø 2070 mm - H 1330 mm Power on the spindle: 30 kW Max hight of workpiece Z-axis: 1330 mm (Z: 1000mm) Number of speeds: 1.7 -> 53 rpm

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, machine/vehicle number: RLX10110, MACHINE SPECIFICATION Height of centres 240mm Distance between centres 1250mm Maximum cutting length 1080mm Swing over bed 480mm Dsdpfx Aoxt E Nnsf Iekw Swing over cross slide 257mm Swing in gap 700mm Gap width from faceplate 170mm Cross slide travel 230mm Spindle bore 80mm Spindle nose Camlock D1-8 Spindle speeds 25 to 2500rpm Main motor 7.5kW Tailstock quill travel 160mm Tailstock quill taper No. 5 MT Approximate weight 2950Kg Dimensions W x D x H 2600mm x 1460mm x 1810mm MACHINE EQUIPPED WITH Prototrak RLX CNC control TRAKing Auxiliary output 3 jaw chuck Quick change toolpost and toolholders Enclosed guarding Coolant system Lighting

Condition: excellent (used), CNC Lathe with y-axis DMG MORI - CTX BETA 800 4A MACH-ID 9282 Make: DMG MORI Type: CTX BETA 800 4A Control: Siemens 840 D-SL Year: 2012 Dedpfxoxuqw Ho Af Ijkw Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, Year of construction: 2008, turning diameter 720 mm turning length 2200 mm control OSP-P-200L workpiece weight flying clamped 300 workpiece weight 1000 kg Dedpfx Afsxuv Hme Iskw z-travel 2215 mm y-travel 660 mm z-travel 250 ( -125 / +125 ) mm c-axis 360 0 b-axis -15 / +195 ° tailstock quill taper metric 120 mm tailstock - travel of quill 250 mm tool changer 32 Plätze total power requirement 55 kW weight of the machine ca. 28 t dimensions of the machine ca. 7x3,1x3 m

Condition: good (used), Year of construction: 2010, Bar capacity 50.8mm, maximum cutting diameter 279mm, maximum cutting length 274mm, Spindle power 11Kw, Spindle speed 6,000rpm, 12 station turret, Dodpfx Afsxlch Ss Iokw fitted with collet chuck, tool setter and magazine barfeed unit.

Condition: used, machine/vehicle number: L2SIH0236, turning diameter over cross slide: 700 mm, turning length: 1,500 mm, spindle bore: 80 mm, Leadwell LTC 30 BPL, CNC Turning Centre with Fanuc OT Control, fitted with 300mm dia 3 jaw chuck Made in Japan, approx 700mm swing x 1500mm centre distance, spindle bore 80mm,  operators foot pedal, Serial Number L2SIH0236, swarf conveyor, Dkodsw A Rqrepfx Af Isw

Condition: ready for operation (used), chuck outer diameter: 700 mm, total height: 3,415 mm, controller model: Siemens 840D Solution Line, empty load weight: 17,000 kg, Type: Ultrix 800 RT The Ultrix 800 RT is a multifunction machining center with 5 interpolated axes and a moving gantry for high-speed milling, turning, grinding, drilling, tapping, finishing, deburring, and roughing of complex parts. When used for turning vertical lathe: - swivel range: 1100 mm - maximum weight of the workpiece: 700 kg - 40/30 kW on the table Dkedpfx Aextgkaof Ijw - max. torque on the table: 1500 Nm - maximum speed of the table: 1000 rpm !! - hydraulic clamping on table - tool taper for turning: KM63 - 150-position tool changer with 24 tool positions for turning When used for milling, grinding, drilling, ... machining center: - X-axis: 800 mm - Y-axis: 900 mm - Z-axis: 600 mm - A-axis: -30° / 110° - C-axis: continuous - maximum weight of the workpiece: 700 kg - 55/40 kW on spindle - max. torque on the spindle: 22 Nm - max 40,000 rpm - tool taper for milling: HSK-E40 - 150-position tool changer with 126 tool positions for milling, grinding, drilling List of options mounted on the machine: 1 - 40,000 rpm high-speed spindle 2 - table dia 700 mm with hydraulic clamping 3-150-position tool changer 4 - chip conveyor belt 5 - cooling system with recovery 6 - coolant temperature control 7 - high pressure cooling (40 to 70 bar) by spindle 8 - smoke extraction system 9 - chip collection box 10 - Presetting system and tool integrity: laser and mechanical probe for measuring tools 11 - Renishaw probe Max turningdia -- passage: 1100 mm Power on the spindle: 40/30 kW Long: 4655 mm Wide: 5890 mm Turret: yes Qty Tools: 150 positions Coolant pump: yes

Condition: good (used), Ecoca MT-312/750 CNC Lathe FANUC 21iTB, 12″ Chuck, 2006 Year: 2006 Control: FANUC 21iTB Chuck Size: 12″ (305 mm) – 3-Jaw Swing Over Bed: 600 mm Swing Over Cross Slide: 330 mm Max Turning Diameter: Over Bed: 450 mm (17.7″) Over Cross Slide: 330 mm (12.99″) Djdpfx Aexpnl Def Iokw Z-Axis Travel (Turning Length): 730 mm (28.74″) Spindle Power: 24.8 HP (18.5 kW) Spindle Speed: Up to 3,200 RPM Tool Turret: 12-station Tailstock: Included Tool Arm: Included

Condition: used, turning length 4000 mm turning diameter over bed 1000 mm turning diameter over cross slideways 900 mm centre height 1090 mm control SIEMENS 810D Djdpjxukvpofx Af Iokw max. workpiece weight 1500 kg Rotating speeds 1000 U/min bed width 355 mm max. workpiece weight 3000 kg dia. of quill 180 mm spindle passage 155 mm engine output 40 kW weight of the machine ca. 3,15 t required space 3,51 x 1,80 x 2,02 m GURUTZPE A-1200 G4 CNC lathe with milling and grinding equipment

Condition: used, Year of construction: 2008, turning diameter 0410 mm turning length 500 mm control Plus iT Heidenhain turret head 12 pos. VDI 30 swing over bed 520 mm spindle turning speed - stepless 25 - 5000 rpm spindle bore 87 mm feed - longitudinal/cross mm/min rapid travel - longitudinal/face 24/20 m/min dimensions 5000 x 1800 x 1800 mm total power requirement 44 KVA weight of the machine ca. 5,0 t Machine is with C- axe and life tooling! Control: Heidenhain Plus iT. Dkjdpfx Ajxukqmof Iew Machine has chip conveyor, chuck and tailstock.

Condition: good (used), Year of construction: 2007, turning length: 600 mm, spindle bore: 33 mm, Distance between main spil and left turret 404 mm Dksdpfsxtb Nwex Af Iew Distance between spil and sub spil nose minimum 260 mm Distance between spil and sub spil nose maximum 760 mm Max. turning Ø: 180mm X-Axis: 160mm Z-Axis: 210/600mm Spindle bore: 33mm Speedrange: 4000Rpm Spindle power: 7.5kW Subspindle speeds:4000Rpm Subspindle bore: 7.5mm Length: 3100mm Width: 1700mm Height: 1800mm Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: ready for operation (used), Year of construction: 2004, spindle bore: 41 mm, turning diameter: 330 mm, center width: 750 mm, Siemens control capacity 750X330MM spindle bore 41MM maximum spindle speed 4000 rpm Multifix turret set of Multifix collets and jaws Dkjdpfx Aexu Igxof Isw

Condition: ready for operation (used), chuck outer diameter: 1,200 mm, controller model: E.C.S CNC 1402, empty load weight: 17,000 kg, 5000 kg maximaal op tafel Dkodpfoxqh R Nex Af Isw KM 50 gereedschappen Max turningdia -- passage: 1400 mm Power on the spindle: 60 kW Max longitudinal travel X-axis: 2700 mm Max hight of workpiece Z-axis: 750 mm Number of speeds: 2-430 rpm - max 450 Nm Power needed: 3 x 380 V TOOLING: yes Turret: yes Qty Tools: 24 Coolant pump: yes Light: yes

Condition: excellent (used), Harrison Alpha 1550 XS Manual / CNC Lathe Year: 2018 Control: FANUC Oi-TF Swing Over Bed: 554mm Swing Over Cross Slide: 370mm Swing in Gap: 830mm Distance Between Centres: 2000mm Spindle Bore: 104mm dia. Spindle Speeds: 1 to 2000 RPM Dkedexpnk Topfx Af Iow Quick Change Toolpost Boring Bar attachment

Condition: like new (used), Year of construction: 2022, operating hours: 105 h, functionality: fully functional, Haas ST50 Horizontal Turning Machine Slant Bed Lathe. Bought new directly from Haas and installed in Early 2023. As a "last of line" model from Haas (which they've yet to make this size since), this machine is fully loaded and as you can see from the build list below it is very well spec'd. It also only has 105 hours use. Viewing advised and welcome at our workshop in Canterbury, Kent. Videos can be sent and or uploaded to Youtube also. This machine and others we are selling are also listed else where. Djdpsxrf Stofx Af Iokw Please get in touch with us at Showan Hydraulics, Barham, Kent if you require any further details. £325,000 + VAT PRODUCT OVERVIEW • Maximum Capacity: 25.5" x 80" (648 x 2032 mm) • Spindle Bore: 8.5" (216 mm) • Swing Over Bed: 34.5" (876 mm) • Main Drive: 55 hp (41 kW) vector drive • Spindle Speed: 1200 rpm, 2-speed gearbox • Spindle Nose: Front and rear A2-15 • Chucks: 25" (635 mm) Manual 3-Jaw and 4-Jaw Chucks • Turret: 12-station bolt-on turret • Tailstock: Programmable servo with MT6 quill • Control System: 15" touchscreen interface with USB port, memory lock keyswitch, and colour remote jog handle • Additional Features: Rigid tapping and variable flow coolant pump _____ STANDARD FEATURES • Bolt-On Toolholder Kit: Comprehensive set of toolholders, sleeves, coolant block, and turning stick clamps for flexible setup. • 1200-RPM Spindle: Powerful 55 hp (41 kW) A2-15 spindle with 2-speed gearbox for optimal torque and speed. • Program Memory: 1 GB onboard memory for program storage and backup. • Coolant System: 95-gallon (360 L) tank with 3/4 hp (0.6 kW) pump del

Condition: used, Year of construction: 2000, turning diameter 0420 mm turning length 635 mm control 21i-T Fanuc turret head 12 pos. Dedpfexukqtjx Af Iekw swing over bed 570 mm spindle turning speed - stepless 25 - 5000 rpm spindle bore 79 mm feed - longitudinal/cross mm/min rapid travel - longitudinal/face 24/20 m/min main drive motor 28/21 (40/100%) kW total power requirement 44 KVA weight of the machine ca. 5,7 t dimensions of the machine ca. 5,5 x 3 x 1,8 m Control: Fanuc 21i-T. Machine is with tailstock. Machine has dust exhaust and chip conveyor.

Condition: used, functionality: not functional, incl. some tool holders incl. live driven tool holder Full C-Axis 360.000 Chip conveyor Problem on Turret Revolver live tools Max. turning Ø: 430mm X-Axis: 230mm Z-Axis: 495mm Spindle bore: 50.8mm Speedrange: 5000Rpm Spindle power: 7.5kW ATC / revolver: 12 Speed live tools:5000Rpm Length: 3400mm Width: 1900mm Height: 2700mm Dkodpfx Ajxtbqnsf Ijw Weight: 3000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: not inspected (used), Year of construction: 2001, turning length: 4,000 mm, turning diameter: 725 mm, num PLS3 capacity 4000X725MM spindle bore 81MM bezel 3-jaw chucks Dkjdpfevxtt Aex Af Iow

Condition: ready for operation (used), chuck outer diameter: 1,600 mm, controller model: E.C.S CNC 2600, Mario Carnaghi TG10/1600 - Ø 1700 mm CNC Max turningdia -- passage: 1700 mm Power on the spindle: 36.7 kW Max longitudinal travel X-axis: 1965 mm Max hight of workpiece Z-axis: 750 mm Dkedjxqh R Aopfx Af Isw Number of speeds: 3.5 - 300 rpm TOOLING: yes Turret: yes Qty Tools: 12 Coolant pump: yes Light: yes

Condition: excellent (used), Year of construction: 2020, SIEMENS 840D SL control unit Dkedpfxsvi Nizs Af Iew MAIN SPINDLE Speed 5.000 1/min Spindle bore 65 mm COUNTER SPINDLE Speed 7,000 1/min Spindle bore 42 mm 2 REVOVER Travel X1, X2 180mm Travel Y1 ±45mm Travel Z1= 704mm, Z2= 620mm 12 stations per revover all driven Chip conveyor Bar loading magazine TOP X-FILES XFS/7.3

Condition: good (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: 101458, Machine Data Sheet General Information Manufacturer: EMAG Machine Type: CNC Vertical Lathe Model: VL5 S Serial No.: 101458 Year of Manufacture: 2008 Technical Data Max. Chuck Diameter: 260 mm Max. Swing Diameter: 260 mm X-Axis Travel: 570 mm X-Axis Working Stroke: 250 mm Z-Axis Travel: 200 mm Conveyor Maximum Permissible Total Weight: 120 kg Conveyor Maximum Diameter: 220 mm Front Spindle Bearing Diameter: 110 mm Main Drive AC Asynchronous Motor Max. Speed: 4,500 (5,000) rpm Drive Power at 100/40% Duty Cycle: 18/27 kW Torque at 100/40% Duty Cycle: 202/303 Nm Number of Tools: 12 pcs. Dksdpfx Afextpi So Iew Tool Holder DIN: 69880, Diameter 40 mm, Max. Tool Length 190 mm Chip Conveyor (Hinged Belt Conveyor): Discharge Height 1,250 mm Coolant Tank: 315 liters, 8 bar Control: Siemens 840 D Connected Load: 42 kW Voltage: 400V 50Hz Weight: approx. 6,500 kg Required Floor Space: 10 m²

Condition: ready for operation (used), Type: TVM 450/5 Uitzonderlijke frees- en draaibank voor verticale bewerking die zeer grote werkstukken kan bewerken. Zowel de binnen- als de buitendiameter van de werkstukken kunnen worden bewerkt! De machine bestaat uit een vaste buitenkolom en een beweegbare binnenkolom. Draaitafel: buitendiameter: 6300 mm binnendiameter: 3000 mm grootste diameter van het werkstuk: 9800 mm kleinste diameter van het werkstuk: 2220 mm maximaal gewicht op tafel: 300 ton rotatiesnelheid: 0,08 27 tpm rotatiesnelheid bij draaien/frezen: ,4 tpm Vaste externe kolom: ramafmetingen: 550 x 550 mm diameter van de spindel: 304,8 mm ISO 60 - 37 kW op spindel maximale hoogte van uitwendig draaien/frezen: 8700 mm min. hoogte van uitwendig draaien/frezen: 700 mm verticale slag: 8000 mm horizontale slag: 2030 mm Beweegbare binnenkolom: RAM-formaat: 280 x 280 mm max. diameter van inwendig draaien/frezen: 5180 mm Dsdpjxqh Stsfx Af Ijkw min. diameter van inwendig draaien/frezen: 3048 mm max. hoogte van inwendig draaien/frezen: 5800 mm min. hoogte van inwendig draaien/frezen: 615 mm verticale slag: 5800 mm horizontale slag: 1120 mm Spiltoerentallen: 1,2 601 tpm Totaal vermogen: 250 kW 5-assige CNC-besturing

Condition: excellent (used), Year of construction: 2005, operating hours: 51,558 h, functionality: fully functional, machine/vehicle number: 02280000921, Used CNC lathe Dkodpewlaqgefx Af Ijw Make: GILDEMEISTER Type: CTX520 Linear Year of manufacture: 2005

Condition: ready for operation (used), travel distance Z-axis: 500 mm, feed length X-axis: 1,020 mm, feed length Y-axis: 510 mm, controller manufacturer: Heidenhain TNC 410, total height: 2,600 mm, total length: 3,000 mm, total width: 2,200 mm, empty load weight: 3,600 kg, rotational speed of tool magazine (max.): 6,000 rpm, Chipconveyor Dodexp Slhopfx Af Iskw Table dimensions: 1150 x 490 mm Admission in spindle (ISO): BT 40 Power on the spindle: 11 kW Toolchanger: yes Number of toolholders: 22 tools

Condition: ready for operation (used), chuck outer diameter: 1,120 mm, total height: 4,100 mm, empty load weight: 16,500 kg, Type: Stanko 1512 Maximale werkstukhoogte: 1000 mm Verticale schuifmaat maximale horizontale verplaatsing: 775 mm maximale verticale verplaatsing: 700 mm Horizontale schuifmaat maximale horizontale verplaatsing: 630 mm maximale verticale verplaatsing: 1000 mm Dwarsbalk maximale slag: 660 mm Max turningdia -- passage: 1250 mm Power on the spindle: 30 kW Number of speeds: 5 > 250 rpm Long: 2750 mm Djdjxp Slbepfx Af Iokw Wide: 2975 mm