Used Vertical Foam Cutting Machine for sale (67,882)

Condition: as good as new (ex-display), Year of construction: 2024, laser power: 10,000 W, sheet thickness (max.): 30 mm, sheet thickness steel (max.): 30 mm, sheet thickness aluminum (max.): 30 mm, sheet thickness brass (max.): 20 mm, sheet thickness copper (max.): 15 mm, positioning speed: 5 m/min, repeat accuracy: 5 mm, overall weight: 12,000 kg, warranty duration: 12 months, working range: 3,050 mm, Equipment: safety light barrier, Make: DURMA Type: HD-F 3015 III Fiber Working range X-Y-Z: 3060x1530x160 mm Laser power: 10000 Watt IPG Control: Siemens Sinumerik 840D Operating hours: 0 h Sheet thickness mild steel: 30 mm Sheet thickness stainless steel: 26 mm Sheet thickness aluminum: 15 mm Sheet thickness brass: 20 mm Sheet thickness copper: 15 mm Sheet size: 3048x1524 mm Loading weight: 200 kg/m² Speeds X-Y axes: 100 m/min. Simultaneous X-Y axis speeds: 280 m/min. Positioning accuracy: +/- 0.05 mm Repeat accuracy: +/- 0.05 mm Ppedjdx Nalepfx Acvop Installation area L/W/H: approx. 14500x7500x2420 mm Weight: approx. 12000 kg Standard equipment Automatic pallet changer Sinumerik 840D control system Precitec Procutter F150 focus auto-focus cutting head Automatic sheet position and sheet size measuring system Automatic nozzle cleaning Position laser diode Central lubrication Simple user interface Parameter page (power-speed-pressure) External CAD/CAM programming software with autonesting optional Lantek software Work area lighting Warning light Multi-chamber extraction system Special laser cutting options Remote maintenance CE marking Extended equipment IPG fiber laser source 10000 Watt including cooler Filter, compact dedusting Vanterm Motorized chip conveyor for small parts/waste Laser service set Cloud license Lantek Expert Inside software Lantek software with positioning laser diode with automatic sheet position detection, measurement Auto nozzle changer (Nozzle Changer) The machine can be viewed and demonstrated at our demonstration center in Staufenberg at any time by appointment. Further machines are available for demonstration in Staufenberg. We will be happy to send you further information on request.

Condition: as good as new (ex-display), Year of construction: 2024, Make: DURMA Type: HD-TC 60170 Fiber Year of construction: 2024 Automatic loading unit 6000 mm Unloading system 4000 mm Laser power: 2000 Watt Control: Siemens Sinumerik 840D Operating hours: 24 h Max. pipe diameter: 170 mm Min. pipe diameter: 20 mm (12 optional) Max. Square profile dimensions: 120x120 mm Max. Dimensions of rectangular profiles: 150x100 mm Ppedpfx Aced Tt Atevjp Max. Profile length: 6500 mm Min. profile length: (for automatic feed) 3000 mm Max. Profile weight: 37.5 kg/m Max. Material thickness: (for 2 kW) 8 mm Min. material thickness: 0.8 mm Length of the last inserted part: 185 mm Positioning accuracy: +/- 0.20 mm Repeat accuracy: +/- 0.05 mm Max. Loading capacity: 3000 kg Profile types: round, square, rectangular, elliptical H,C,U,L *Installation area L/W/H: approx. 16000x7400x2350 mm * Weight: approx. 20000 kg * depending on equipment variant Standard equipment Sinumerik 840D control system Autofocusing PRECITEC Procutter cutting head F150 focus Manual unloading table Manual loading Laser diode for defining position points Central lubrication Chip conveyor External user interface for the output of analog values (power-speed-pressure) External CAD/CAM programming software Lantec with autonesting Work area lighting Warning light Various laser cutting options selectable Remote control: remote maintenance access via LAN connection or WLAN CE marking Extended equipment IPG fiber laser source 2000 Watt (incl. cooler) Automatic loading unit 6000 mm Unloading table 4000 mm Filter, compact dust extraction - Vanterm The machine can be viewed and demonstrated at any time by appointment at our demonstration center in Staufenberg. Further machines are available for demonstration in Staufenberg. We will be happy to send you further information on request.

Condition: new, The Durma 5-axis fiber laser cutting system will be your best partner for manufacturing automotive and other high-precision and complex 3D parts. The system offers 25% more processing area than machines with the same concept. For impeccable cutting performance, the powerful machine body and rotary table will give you the best quality. With the easy use of the fixture, you can save time. No maintenance and service is required thanks to components from well-known manufacturers and high quality materials. High quality 3D cutting can be achieved. With this technology, you have less energy consumption and can increase your business profit. The machine impresses with its speed, reliability and design. HD-FA Technical Data Available in 2,3 and 4 kW X axis: 3,000 mm Y axis: 1.500 mm Z axis: 650 mm B axis: ±135° C axis: ±360°xn Maximum vector speed: 173 m/min. Ppjdpfxsg Adkns Acvjp Maximum vector acceleration: 1.73 G Tolerance positioning: ±0.08 mm Repeatability: ±0.08 mm MACHINE DIMENSIONS Machine size: 6168 mm x 3936 mm h= 3700 mm working area: 9.000 mm x 10.000 mm (safe area) Distance of the turntable door: 4.000 mm machine weight: 16.000 kg Cutting head: Type: 3D Focus type: Automatic Control unit: CNC Siemens Sinumerik 840D SK Screen: 19 inch touch screen Filter Capacity: 2.500 m³/h - 4 kW

Condition: new, Year of construction: 2024, The Durma HD-TC 60220 pipe laser stands for maximum precision and efficiency in the processing of pipe materials. With its impressive maximum pipe diameter of Ø220 mm and the ability to cut both square profiles of 160 x 160 mm and rectangular profiles of 200 x 100 mm, this pipe laser offers exceptional flexibility for a wide range of applications. Thanks to the advanced automatic loading system, which can handle tubes up to Ø170 mm in diameter, and the ability to process materials up to 6500 mm in length, the HD-TC 60220 is ideal for projects that require fast production with consistently high quality. The minimum material length for automatic loading is 3000 mm, which further increases the efficiency of the machine and reduces processing time. Max. Tube diameter: Ø220 mm Laser power: 3 kW Max. Dimensions of the square profile: 160 x 160 mm Max. Dimensions of the rectangular profile: 200 x 100 mm Min. pipe diameter: 20 mm (12 mm with manual loading) Max. Tube diameter for automatic loading: Ø170 mm Max. Profile dimensions for automatic loading: 150 x 100 mm, 120 x 120 mm Max. Material length: 6500 mm Min. material length for automatic loading: 3000 mm Length of the last piece: 4000 / 6000 mm Pedpfxeq Tpkys Acvjpp Unloading length: 150 mm Max. Material weight per meter: 52 kg/m Max. Material weight (total length): 340 kg Max. Loaded weight: 3000 kg Profile types: Round, Square, Rectangular, Elliptical Types of open profiles: L, U

Condition: as good as new (ex-display), Year of construction: 2024, Make: DURMA Type: HD-F 3015 III Fiber Year of manufacture: 2024 Working range X-Y-Z: 3060x1530x160 mm Laser power: 4000 Watt IPG Control: Siemens Sinumerik 840D Operating hours: 0 h Sheet thickness mild steel: 20 mm Sheet thickness stainless steel: 10 mm Sheet thickness aluminum: 12 mm Sheet thickness brass: 10 mm Sheet thickness copper: 6 mm Sheet size: 3048x1524 mm Loading weight: 200 kg/m² Speeds X-Y axes: 100 m/min. Simultaneous X-Y axis speeds: 280 m/min. Positioning accuracy: +/- 0.05 mm Repeat accuracy: +/- 0.05 mm Installation area L/W/H: approx. 14500x7500x2420 mm Weight: approx. 12000 kg Standard equipment Automatic pallet changer Sinumerik 840D control system Precitec Procutter F150 focus auto-focus cutting head Automatic sheet position and sheet size measuring system Automatic nozzle cleaning Position laser diode Psdpfod Sd Tnsx Acvjpp Central lubrication Simple user interface parameter page (power-speed-pressure) External CAD/CAM programming software with autonesting optional Lantek software Work area lighting Warning light Multi-chamber extraction system Special laser cutting options Remote maintenance CE marking Extended equipment IPG fiber laser source 4000 Watt including cooler Filter, compact dedusting Vanterm Motorized chip conveyor for small parts/waste Laser service set Cloud license Lantek Expert Inside software Lantek software with positioning laser diode with automatic sheet position detection, measurement Auto. Nozzel Changer (nozzle changer) Camera Inside The machine can be viewed and demonstrated at any time by appointment at our demonstration center in Staufenberg. Further machines are available for demonstration at our demonstration center in Staufenberg. We will be happy to send you further information on request.

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, CNC Machining Center Hedelius C60S -1200 Control: Heidenhain iTNC 530 Year of manufacture: 2016 Internal machine no.: 9 Travel paths: X-axis: 1,200 mm Y-axis: 620 mm Z-axis: 520 mm Clamping area: 1,550 x 600 mm Table load: approx. 1,500 kg Spindle taper: SK 40 Tool magazine: 30 positions Spindle speed: 30 - 6,000 rpm Equipment: - KM500 sieve filter system - High-pressure pump Psdpfx Aeyvp U Necvjpp - Chip conveyor - Machine enclosure - LTA extraction system

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, controller manufacturer: Heidenhain, For sale: Used DMC 635 – Powerful Vertical Machining Center Upgrade your production processes with this robust and high-performance DMC 635 from DMG MORI! This vertical machining center is ideal for a wide range of milling applications, offering excellent performance when machining various materials. Key Features: Podpfxoyx D T Eo Acvjpp • High rigidity and stability: Ensures precise machining results and long service life. • Large working area: Provides ample space for processing large workpieces. • High spindle speed: Enables fast and efficient machining operations. • Sturdy construction: Guarantees longevity and reliable performance. • CNC control: Equipped with a user-friendly CNC controller for easy programming and operation. Additional Information: • Year of manufacture: 2006 • Condition: good, used • Control: Heidenhain iTNC530 • Travel paths: 635 x 460 x 510 mm • Spindle speeds: 20 – 10,000 rpm Ideal for: • General machining • Tool and mold making • Single-part and small-batch production • Mechanical engineering Why choose this DMC 635? This machine has been regularly serviced and is in good used condition. It offers a cost-effective way to expand your machining capabilities and increase your productivity.

Condition: not inspected (used), Year of construction: 2003, machine/vehicle number: SM1000755, ● Delivery terms: Free loaded on truck ● Location: 42477 Radevormwald ● Availability: By arrangement – Collection must take place on 06.05.2026. Unfortunately, collection outside of this timeframe cannot be accommodated. ● Payment terms: Advance payment via bank transfer ● Internal ID: DÄ4 ● Inspection under power: Yes Technical data: ● Drive motor speed: 2800 rpm ● Grinding spindle speed: 4500 rpm ● Drive power: 250 W ● 230 V Scope of delivery: ● Available documentation ● Includes extensive accessories and grinding wheels as shown in the images Dimensions & weight: ● Installation dimensions (L x W x H) approx.: 400 x 400 x 400 mm ● Weight approx.: 35 kg If you have any questions or would like to arrange an inspection, please feel free to contact us! Additional notes: ► Transport to the destination can be offered upon request ► The offer price is net, plus VAT ► The goods are sold excluding any warranty Ppedpsyv Hikofx Acvsp ► Technical data without guarantee ► Subject to prior sale ❗ The goods are sold exclusively to business customers ❗

Condition: good (used), Year of construction: 1972, functionality: fully functional, overall weight: 1,200 kg, x-travel: 290 mm y-travel: 170 mm z-travel: 310 mm Millung spindle number of milling spindle turning speeds: 16 milling spindle turning speeds: 40 - 2000 U/min Ppsdoyxqm Sspfx Acvop inner taper of milling spindle: ISO 40 max. diameter of the vice bore: 25 Vertical milling head inner taper of milling spindle: ISO 40 spindle turning speed range: 50 - 2.500 U/min max. diameter of the vice bore: 25 dimensions: 1.100 x 1.100 x 1.660 mm

Condition: used, Year of construction: 2007, functionality: fully functional, machine/vehicle number: 16/195245, repeat accuracy: 0.025 mm, working range: 3,660 mm, travel distance X-axis: 3,660 mm, travel distance Y-axis: 1,830 mm, travel distance Z-axis: 200 mm, positioning accuracy: 0.025 mm, type of input current: three-phase, input voltage: 400 V, sheet thickness aluminum (max.): 200 mm, table length: 4,000 mm, operating speed: 212 mm/s, table width: 2,000 mm, pressure: 6,000 bar, positioning speed: 12,700 m/min, rapid traverse X-axis: 12,700 m/min, rapid traverse Y-axis: 12,700 m/min, operating pressure: 6,000 bar, cutting speed: 7,620 mm/min, travel speed (max.): 12,700 mm/min, feed length X-axis: 3,660 mm, feed length Y-axis: 1,830 mm, feed length Z-axis: 200 mm, total width: 21,000 mm, feed rate X-axis: 12,700 m/min, feed rate Y-axis: 12,700 m/min, water pressure: 6,000 bar, compressed air connection: 6 bar, pump pressure: 6,000 bar, product height (max.): 200 mm, working length: 3,660 mm, input frequency: 50 Hz, power: 75 kW (101.97 HP), load capacity: 3,200 kg, throat depth: 21,000 mm, FLOW I-6012 IFB – Premium Waterjet Cutting System with 87,000 PSI & Dynamic Waterjet Cut ANY material up to 250 mm thick – with precision down to 0.025 mm. This Flow IFB is not your standard waterjet system. Featuring 87,000 PSI HyperPressure technology and the patented Dynamic Waterjet cutting head, it belongs to the absolute top range of machines. Comparable new systems today cost over €400,000. WHY THIS MACHINE WILL IMMEDIATELY BENEFIT YOUR OPERATION: - 87,000 PSI instead of the usual 60,000 PSI: This translates into 20-50% higher cutting speeds and 30-50% lower abrasive consumption, significantly reducing your unit costs in daily operation. - Dynamic Waterjet with 5-axis kinematics: Automatic compensation for taper and stream lag. Achieve burr-free, taper-free cut edges at 2-4 times the speed of conventional machines – with no need for secondary finishing. - Immediately production-ready after oil change: The system was in regular operation until August 2025. No years of downtime, no hidden damages. Operating hours can be read directly at the control unit during inspection. - Large cutting area 1,830 x 3,660 mm: Process large sheets, plates, and components without repositioning. Ideal for contract manufacturing, metal fabrication, stone processing, and prototyping. - Siemens Sinumerik 840D: Industry-standard control system. Your operators are familiar with the interface, and spare parts and support are available long-term. TECHNICAL DATA: Manufacturer: Flow International Corporation (USA) Model: I-6012 IFB (Integrated Flying Bridge) Year: 2007 Serial No.: 2006353W-044 Cutting range: 1,830 x 3,660 mm Z-axis: 200 mm Table size: 2,000 x 4,000 mm Table type: slat table with water catch basin Pump: Flow HyperJet Model 7X Intensifier Operating pressure: 87,000 PSI (6,000 bar) Motor: 100 HP (75 kW) Power supply: 400V / 3-phase / 50 Hz Cutting head: PASER ECL Plus with Dynamic Waterjet Axes: 5 axes (+/- 10° articulation) Height sensor: automatic Accuracy: +/- 0.025 mm Repeatability: +/- 0.025 mm Max. traverse speed: 12,700 mm/min Max. cutting speed: 7,620 mm/min Controller: Siemens Sinumerik 840D Software: FlowMaster / FlowPath CONDITION: The machine is stored dry and protected in a hall. All components are complete. There is no visible damage or corrosion. An oil change is required prior to recommissioning. Operating hours can be read directly at the Sinumerik control during inspection. SCOPE OF DELIVERY: Psdpfjyl S Nyex Acvopp - Complete Flow I-6012 IFB waterjet cutting system - 87K PSI HyperJet intensifier pump with 100 HP motor - Dynamic Waterjet cutting head (5-axis, PASER ECL Plus) - Siemens Sinumerik 840D control with PC operator station - Complete abrasive delivery system - Slat table with catch basin - Complete electrical cabinets - Spare parts on pallet (high-pressure hose, various components) - 8 original manuals (German/English) Overhead crane available for loading on site. Inspection possible at any time by appointment.

Condition: used, Year of construction: 2021, functionality: fully functional, Control: FANUC 0i Ppsdpfx Ajyxp N Socvep x-travel: 900 mm y-travel: 460 mm z-travel: 520 mm Table dimensions (LxW): 1.050 x 459 mm max. table load: 600 kg rapid travel x/y/z: 36 / 36 / 36 m/min max. spindle speed: 8.000 rpm Tool magazine for 30 + 1 tools chip conveyor Hand-held spray gun with coolant RENISHAW touch and spindle probe

Condition: used, Year of construction: 2015, travel distance X-axis: 1,270 mm, travel distance Y-axis: 508 mm, travel distance Z-axis: 635 mm, controller manufacturer: Haas, workpiece weight (max.): 1,588 kg, total height: 3,023 mm, total length: 4,089 mm, total width: 3,353 mm, rotational speed (min.): 40 rpm, rotational speed (max.): 8,100 rpm, overall weight: 6,033 kg, Equipment: documentation/manual, CNC Vertical Machining Centre CNC Control Haas CNC Table size 1.321 x 457 mm Table load 1.588 kg Number of pallets: 1 x Movement X-axis 1.270 mm Movement Y-axis 508 mm Movement Z-axis 635 mm Spindle taper MAS BT40 Spindle speed 40 - 8.100 1/min Spindle motor 22,4kW Magazin capacity 24 + 1 If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Psdpeytb Syefx Acvspp Feel free to view our other advertisements for a complete overview of our stock.

Condition: ready for operation (used), Year of construction: 1980, functionality: fully functional, machine/vehicle number: 52EHD146827, Hello, Pjdow Udy Nspfx Acvjpp We are selling a Kluge platen press. This machine is capable of hot foil stamping, die-cutting, embossing, and debossing on paper and board up to over 3 mm thick. Maximum sheet size with automatic feeder: 356 x 559 mm Without feeder: 431 x 628 mm The machine is in perfect working condition and remains in daily production. The heating plate is new (worth €5,000). Kluge is still in operation as a company and can provide comprehensive training if needed. Feel free to contact me for more information.

Condition: good (used), Year of construction: 2007, functionality: fully functional, travel distance X-axis: 800 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 630 mm, For sale 1 machining center Hartford LG 800S Year 2007 3 axes Fanuc A1100 Machining Capacities Axis travels X/Y/Z: 800 mm (X-axis) x 510 mm (Y-axis) x 630 mm (Z-axis) Table dimensions: 950 mm x 510 mm Maximum workpiece weight: 500 kg Spindle speed: Typically 8,000 rpm, optionally 10,000 rpm Spindle taper: BT40 (or ISO 40) Tool magazine (ATC): 24-position automatic tool changer Machine weight: Approx. 5,800 kg BT MACHINES PURCHASE AND SALE ALL TYPES OF INDUSTRIAL EQUIPMENT Ppedpfsxvz Tnox Acvjp ALL TYPES OF MACHINE TOOLS

Condition: used, Year of construction: 2000, x-travel 1.050 mm y-travel 560 mm z-travel 450 mm Control OKUMA OSP-U100M-H table dimensions 1.300 x 560 mm spindle tunring speed 10.000 U/min tool taper BT 40 In our assessment, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools, and clamping devices shown are only included in the scope of delivery Ppodpsyxhiwofx Acvop if this is noted in the additional information. Technical data and specifications are subject to change without notice and errors. Prior sale is reserved.

Condition: used, Year of construction: 2016, x-travel 610 mm y-travel 510 mm z-travel 610 mm Control MAX5 distance spindle /table 150 - 760 mm table surface area 760 x 510 mm T-slots (number x width x distance) 5 x 18 H8 x 100 mm table load 1.360 kg number of spindle speeds 12.000 spindle drive 9 kW torque 95 Nm tool taper SK-A 40 number of tool places 30 Pos. Ppedpfx Asyxhiqjcvjp tool diameter 80 mm Tool diameter with free secondary positions 130 mm tool length - max. 300 mm weight of tools 7 kg auto power on hours ca. 17.626 h spindle hours ca. 900 h In our assessment, the machine is in good used condition and can be inspected under power by appointment. The main spindle was replaced a year ago. Accessories, tools, and clamping devices shown are only included if explicitly stated in the additional information. Technical data and specifications are subject to change without notice. Prior sale is reserved.

Condition: new, Year of construction: 2025, – Capacity M5–M36 – Hydraulic – Working range 2050 mm – Rotatable head – Quick-change chuck – Infinitely variable thread cutting speed – Infinitely variable return speed Ppjdpfjxtq Shjx Acvop – Digital speed display – Includes 14 thread cutting inserts – Heavy-duty work table with T-slots – Lubrication system with manual or automatic function – Emergency stop switch – Documentation – 400V

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, CNC machining center Hedelius C50-1800 Control: Heidenhain iTNC 530 Year of manufacture: 2008 Internal machine no.: 6 Travel paths: X axis: 1,800 mm Y axis: 510 mm Z axis: 480 mm Clamping area: 2x 1,000 x 510 mm Pendulum mode: 2 x 700 x 510 mm Pjdpfxsyvgxxs Acvepp Spindle taper: SK 40 Tool magazine: 20 positions Celox spindle speed: 50 – 12,000 rpm Equipment - 3D Formingstar package - 3D Heidenhain measuring probe - Chip conveyor - Partition wall - LTA extraction system - Water tank, high-pressure pump 20 bar - Machine enclosure

Condition: good (used), Year of construction: 2007, functionality: fully functional, 10 cup wheels vertiocal glass edging machine glass thikness : 3 - 30 mm min. glass size : 50 x 50 mm Psdpfx Aoyhpqaecvepp max. glass weight : 1000 kg working height : 812 mm total power : 16,3 Kw water tank capacity : 422 L working speed : 0,5 - 5,5 m/min. weight : 2890 kg The machine has worked with a flocculant . 62000 working meters

Condition: excellent (used), Year of construction: 2003, operating hours: 49,000 h, functionality: fully functional, Basic Data Hermle Machining Center C 30 V Year of manufacture: 2003 Serial number: 16112 Technical Specifications Heidenhain iTNC 530 Spindle: 10,000 rpm SK 40 32 tool positions Linear axes, standard version Rigid clamping table Internal coolant supply 40 bar Included / Installed Standard filter Standard chip conveyor Standard coolant system Flange for extraction Purge air for scales Ppodpfx Acsyxrr Njvep Paper band filter for ICS (internal coolant system) Scraper-type conveyor for ICS Automatic cabin door Manual cabin roof Laminated safety glass window Electrical thermal compensation iTNC Renishaw probe incl. preparation Chip wash-down gun Key Information from the Spec Sheet Machine currently still under power Inspection possible by appointment Short-term delivery possible Not Included / Limitations Without tools Without workholding fixtures Machine accessories and documentation only as far as still available (books included) Condition of the Machine: Very good / Exceptionally high quality / Extremely clean and well maintained Single-part production in custom gearbox manufacturing The machine receives substantial annual preventive maintenance – an absolute rarity

Condition: good (used), Year of construction: 2015, FOR SALE: OKUMA MILLAC 852VII Vertical Machining Center (2015) Description: High-performance OKUMA CNC vertical machining center for sale, model MILLAC 852VII. Japanese-designed machine, renowned for its exceptional rigidity and surgical precision. Ideally suited for machining complex and heavy prismatic workpieces. Technical Specifications (Source: Manufacturer’s Plate): - Brand: OKUMA Corporation (Made in Japan) - Model: MILLAC 852VII - Year of manufacture: March 2015 (2015.03) - Power supply: 380 V / 3 phase / 50 Hz Ppsdpfx Ajyr Id Hocvsp - Rated power: 44.3 kVA (High-power spindle motor) - Compliance: CE Marked (Certified for the European market) Working Capacities (Standard for model 852VII): - Travels (X / Y / Z): 2,050 mm x 850 mm x 750 mm (Very large capacity) - Table dimensions: 2,200 mm x 850 mm - Maximum table load: 3,000 kg - Spindle speed: Up to 6,000 or 10,000 rpm (depending on configuration) - Spindle taper: BT 50 (High rigidity) - Automatic Tool Changer (ATC): 36 positions (or more, depending on configuration) - Machine weight: approx. 17,500 kg (Ultra-heavy-duty frame) Key features: - Recent machine (2015), still complies with current technology standards - Robust box ways for perfect surface finishes

Condition: new, Year of construction: 2025, functionality: fully functional, machine/vehicle number: 250206, total width: 550 mm, total length: 1,500 mm, total height: 850 mm, empty load weight: 300 kg, Export is possible. Podpfx Acsyw N Rgevjpp

Condition: excellent (used), Year of construction: 1993, functionality: fully functional, wire diameter range: 1,5 - 7,0 mm cutting length: max. 3.000 mm wire feeding speed: 5 - 120 mtr./min * machine is equipped with chamfering unit by grinding* Ppjdpfx Aoyxgtuocvop

Condition: used, Year of construction: 2012, x-travel 635 mm y-travel 510 mm z-travel 460 mm control SLIMline Siemens turning speed range - main spindle 20 - 12.000 min/-1 power capacity - main spindel 13 / 9 kW Ppodpfx Asx S Rxnscvjp Torque 83 / 57 Nm tool taper SK 40 table surface area 790 x 560 mm number of T-slots 4 + 1 T-slot - width 4 x 14H12 / 1 x 14H7 mm T-slot - distance 100 mm max. table load 600 kg table height over floor 720 mm number of toolpositions 20 pos. max. tool diameter 80 mm max. tool-dia with free toolbox 130 mm max. tool length 300 mm max. tool weight 6 kg Total weight, approx. max. 60 kg feed speeds max. 20.000 mm/min rapid traverse 30 m/min total power requirement 17 kVA weight of the machine ca. 4,0 t dimensions of the machine ca. 4,5 x 4,0 x 2,8 m CNC-Machining Center Vertikal DECKEL MAHO - DMC 635 V Ecoline - only 9.290 Spindle-Hours

Condition: used, x-travel / mm Ppedpfx Asyvkwlocvsp y-travel / mm z-travel / mm