Used Vertical Band Saw Machine for sale (93,190)

Condition: good (used), Year of construction: 2008, machine/vehicle number: 6424102096, Offer No. 25101 Technical Data: - Cutting range at 90° round 400 mm - flat W 400 x H 400 mm - Cutting range at 45° flat W 320 x H 320 mm - Cutting range at 60° flat W 210 x H 320 mm - Material support height approx. 700 mm - Saw band dimensions 5090 x 34 x 1.1 mm - Cutting speed steplessly adjustable 17 - 90 m/min - Hydraulic lifting – lowering of the saw frame - Cutting pressure steplessly adjustable 0 - 10 m/min - Total drive power 400 V / 3.5 kW - Coolant system Chjdpfx Adowpincsxjd - Infeed – roller conveyor 7000 mm - Outfeed – roller conveyor with stop + digital display 4000 mm - Space requirement approx. W 2000 x H 1400 x D 2800 mm - Weight approx. 1200 kg

Condition: new, Band saw machine Cedpfx Aedynpcjdxshd Make: OPTIMUM Model: S 275 NV Art.Nr.: 3300265 Condition: new machine Section (round): 225 mm Cutting speed: 20-90 m / min equipped as standard with: -Horizontal vise -Back fence - automatic shut-off after the end of the cut -Späneräumbürste -Coolant system -Manual

Condition: used, Band saw blade shaping machine Vollmer CAB 42 U -band saws: -blade width 60 to 210mm -blade length 6000 to 11000mm Csdscvht Sopfx Adxohd -tooth pitch 6 to 60mm -tooth height 4 to 25mm -clamping angle -5 to +35 -Working speed 30 and 45 teeth/min -with central height adjustment -feed from right to left -with clamping device for band saw blades

Condition: refurbished (used), Year of construction: 2025, functionality: fully functional, roll diameter 400 mm throat 420 mm workpiece height ca. 220 mm table-size 600 x 600 mm Csdpsw U Ehuofx Adxjhd cutting speed 12 - 375 m/min saw band length 3160 - 3260 mm saw band width min./max. 3 - 12 mm total power requirement 3,6 kW weight of the machine ca. 0,55 t dimensions of the machine ca. 0,6 x 1,0 m Overhaul year of construction 2023 400 V, 50 Hz, with CEE plug and cable Color: white/grey Accessories: * New castors * Emergency stop * Both doors electrically locked * Swivel table * Circuit diagram has been redrawn * Electrical acceptance certificate is enclosed On request, an LED light and a belt welding device can be installed for an additional charge Operating instructions, circuit diagram immediately available under chip ready for demonstration ! Accessories: * Machine overhauled in 2023 * New castors * Emergency stop * both doors electrically locked * Swivel table * Circuit diagram has been redrawn * Electrical acceptance certificate is enclosed An LED light can be installed on request for an additional charge Operating instructions, circuit diagram immediately available under chip ready for demonstration ! Operating instructions, circuit diagram immediately available under chip ready for demonstration !

Condition: good (used), Year of construction: 2009, functionality: fully functional, cutting range round steel at 90°: 300 mm, - Saw band dimensions: 3660 x 27 x 0.9 mm - Max. cutting range round: 300 mm - Max. cutting range flat: 320 x 220 mm Chjdpexgbq Uofx Adxod - Roller feed with electric length stop up to approx. 800 mm - Incl. roller conveyor approx. 4 m

Year of construction: 2022, condition: as good as new (ex-display), 1 semi-automatic high-performance horizontal bandsaw with double column guidance and 2° cutting inclination to the table support surface Make:BEKA MAK Model: BMSY 560 C Technical data: Sawing capacity 90° rectangular 560 x 750 mm Sawing capacity 90° round 560 mm Sawing capacity 90° square 560 mm Sawing capacity 45° rectangular 410 x 560 mm Chodpfx Adom Rg H Rsxsd Sawing capacity 45° round 560 mm Sawing capacity 45° square 560 mm saw band size 6000 x 41 x 1,3 mm Band speed, infinitely variable 20-100 m/min. Motor power 4 kW machine dimensions L x W x H 3400 x 1000 x 2050 mm Machine weight 2045 kg Accessories / special features: - Semi-automatic double column band saw - Linear guides - 2° saw cut to table support surface - Infinitely variable cutting speed via potentiometer on the control panel - Hydraulic vice - Hydraulic mechanical saw blade tensioning - Powerful drive motor - Sensitive cutting pressure regulation - Thermal overload protection - Optical height adjustment - Heavy duty gearbox - Coolant device - Feed roller conveyor 1200 mm - Chip brush - 1 pc. Bi-metal saw band - control panel - CE conform IMMEDIATELY AVAILABLE

Condition: good (used), Year of construction: 2002, machine/vehicle number: 21085, Offer 20439 Cedpsw Advujfx Adxehd Technical data: - Cutting capacity at 90° round: 380 mm - Flat: 550 x 380 mm - Hydraulically adjustable miter to the right/left: 30 / 45° - Digital dual-sided display of set angle - Cutting capacity at 45° round: 280 mm - Flat: 380 x 280 mm - Material support height approx.: 1050 mm - Saw blade dimensions: 4250 x 34 x 1.1 mm - Cutting speed continuously adjustable: 18 - 110 m/min - Hydraulic cutting pressure continuously adjustable: 0 - 10 m/min - Hydraulic saw blade tensioning - Hydraulic material vise - Minimum quantity coolant system - Total drive power: 400 V / 2.5 kW - Space requirement approx.: W 1350 x H 2450 x D 2300 mm - Weight approx.: 1200 kg

Condition: used, Year of construction: 2025, Horizontal Metal Band Saw with Swiveling Arm Chsdsxqfauspfx Adxod This horizontal metal band saw with a swiveling arm allows cutting in a plane perpendicular to the axis of the material and at any angle between 0° and 60°. The drive from the electric motor to the wheel driving the saw blade is transmitted through a mechanical gearbox (not a belt drive). The saw blade is tensioned on two cast iron wheels using a manual tensioner and guided through a set of bearing-mounted rollers. The material to be cut can be fed manually or with any mechanical feeding device, while the tool feed operates by gravity, based on oil flow in a dual-chamber hydraulic cylinder. The appropriate arm lowering speed is achieved using a valve that regulates the oil flow between the chambers. The blade guides are equipped with a set of bearing-mounted rollers, which significantly improve blade tracking, service life, straightness, cutting accuracy, and quality. The arm, featuring a rigid design, is made of profiled cast iron. A control panel is mounted on the arm. The base is built as a rigid welded steel sheet body. Inside, there is a separate coolant tank with an electric pump. The upper part of the base is shaped to form a tray for coolant drainage and chip collection during the cutting process. A cast iron worktable is mounted to the base, along with a swiveling arm and a control panel mounted on a separate arm. During the cutting process, the main cutting motion is the movement of the saw blade, while the feed motion is the downward movement of the arm. The arm lowering speed (cutting speed) is regulated by the hydraulic cylinder. In the lower position of the arm (after the material is cut), the saw blade drive is automatically switched off. Safety is ensured by blade covers and micro-switches that stop the motor at the end of the cutting cycle or when any cover is opened. An additional safety feature automatically switches off the saw in the event of blade breakage. Technical Specifications Blade size: 2110 x 0.9 x 20 mm Motor: S1 100%: 0.75 kW Power supply: 230V 50 Hz Blade speed: 65 m/min (50 Hz) Weight: 173 kg Packaging dimensions: 1150 x 560 x 930 mm WARNING !!! The machine is a return item. Original packaging is missing, and paint color differs from standard.

Condition: used, Band saw shaping machine Vollmer CAS L Feed from left to right with support frame Codpfxocvhube Adxohd Auxiliary feed very good condition

Condition: used, No. 3197 Vertical log band saw Bögli 1600 Used, the machine has been continuously maintained and modernized Sawing operation was discontinued in summer 2024 For logs up to 1500 mm in diameter Clamping carriage approx. 7650 mm long, 5 support arms Clamping carriage approx. 3000 mm wide The maximum length that was cut is 8000 mm Cutting capacity averaged 55 - 70 solid cubic meters per 8.5 hours 2 core cut-off saws Drive motor 55 kW, 1460 rpm Roller diameter 1600 mm Saw blade maximum width 205 mm, length 10560 mm, thickness 1.65 mm Hydraulic unit replaced in 2007 Chip carriage rollers and shafts replaced in 2011 The system was operated by 3 people Operator cabin with remote control and video surveillance Space requirement approx. 25000 x 10000 mm LW Sale on behalf of customer, ex location near 5020 Salzburg (Austria), without disassembly, transport and assembly Disassembly, loading and transport by us optionally possible Errors in the description and price reserved In order to avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended Sold as is Technical data, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “purchased as viewed” Chjdpfx Adovvm Iuexed Pictures and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices plus VAT, payment before collection or dispatch Terms of delivery: ex location

Condition: good (used), Year of construction: 2002, functionality: fully functional, machine/vehicle number: 526-02514, DoALL 2013-V3, 2013-V3 Vertical contour band saw Manufacture DoAll sawing Products U.S. Year of manufacture: 08/2002 S/N 526-02514 CE marked Variator drive Max. Working height 330 mm Maximum width up to the column 508 mm Capacity of the machine: b 20″ x b 13″ (508mm x 330mm) These vertical machines are one of the most versatile machines on the market! Vertical contour saws for cutting aluminum, brass, copper, mild steel, tough tool steel, stainless steel and sheet metal as well as cutting plastics and fiber materials. They are also available with a variety of attachments that allow for cutting contours, slices and more. Cedou A Ikhopfx Adxshd The 2013-V2 has the same main structure, capacity and features as the 2013-V3. The only difference is the power of the motor: 2013-V3: 2.2kW/3HP, 400V, 50 Hz Standard equipment One set of high-speed guide blocks with inserts for belts from 3 to 13 mm One set of steel guide inserts for belts of 6, 10 and 13 mm Belt speed indicator Removable chip tray Belt tension indicator Chip blower (requires factory air) Handwheel for lifting the column AC drive with variable speed (speed control, soft start and dynamic braking functions) Belt door interlocks Dual range gearbox Gear oil One bi-metal band saw blade Operating instructions and spare parts manual

Condition: used, Vertical band saw PEHAKA type SM 4 make no. 27060 year of construction approx. 1980 throat 380 mm table size 620 x 480 mm cutting height 250 mm roller diameter 400 mm working height 1120 mm saw band length min. 2900 - max. 3100 mm Cjdpjiv A U Eefx Adxjhd saw band speed 22-125 m/min. infinitely variable motor power 0,6 / 0,75 kW mains connection 380 volt, 50 Hz - infinitely variable saw band speed via Vario belt drive with lever adjustment and 2 motor speeds - saw table tiltable +/- 15 - Saw blade butt welding machine IDEAL BS 0-16 - Saw blade shear - substructure made of U-steel 100 x 50 mm , movable with lift truck space requirement L x W x H 1050 x 800 x 1950 mm weight 355 kg good condition

Condition: good (used), Year of construction: 1992, machine/vehicle number: 5164, Offer 23148 Chsdpfxjq Evn Ej Adxed Technical data: - with hydraulic clamping and feed device - Cutting range round 320 mm - square 300 x 300 mm - large cut-off length with single stroke up to 400 mm - Multiple feed up to 10 x 400 mm - Saw blade dimensions 3660 x 25 x 0.9 mm - Infinitely variable cutting speed 20 - 100 rpm - Hydraulically infinitely variable feed speed - Coolant device - Material support height 720 mm - Saw band - Drive 400 V / 2.5 kW - Space requirement approx. W 1950 x H 1250 x D 1500 mm - Weight approx. 1000 kg

Condition: used, Year of construction: 2025, PROMOTIONAL PRICE! A professional, very powerful and efficient band saw for metal with an arm swivelling up to 45°. Perfect solution for carpentry, production and craft facilities. Its design and solid construction make it stand out from other machines. Product features This universal machine enables cutting in vertical plane and in the plane perpendicular to the axis of the cut material, or at any angle in 45°–90° range. Element cut can be fed manually or by any feeding device. The feed during cutting is gravitational on the principle of oil flow in a two-chamber hydraulic cylinder. Required band linear velocity is obtained by changing the ratio on the belt pulley between the worm gear and the driving motor. Suitable speed of arm lowering is obtained thanks to the valve controlling oil flow between the hydraulic cylinder chambers. Arm made of shaped spheroidal cast iron secures rigidity during operation and absorbs all vibrations. Control panel is situated close by the worm gear. Cutting band transmission system is composed of two cast iron wheels. The first wheel is a tensioning wheel (adjusted with a lever) and the second one is a drive wheel. Torque from the worm gear is directly transmitted to the tensioning wheel, while the worm gear is driven by an electric motor. Appropriate band angle is ensured through a set of roller bearings. The base of the machine is a rigid cuboid made of steel sheets inside which is a cooling fluid container with a flood coolant pump. Tank for flood coolant draining and a container for chips are fixed to the upper part of the machine. Cast iron workbench is attached to the tank, which in turn is equipped with a vice for material clamping and to which the arm of the band saw is fixed. In the lower part of the machine base are holes for wheel axles. Safety during cutting process is ensured by an electric installation meeting all CE requirements. The machine is equipped with a limiting switch that stops the machine after cutting process is finished, an emergency button, a number of microswitches that switch the machine off when, e.g., the belt transmission guard or cutting band guard are opened. Additionally, our machine, as opposed to competitors, is equipped with a wire brush for band cleaning – it prevents the blade from blocking and ensures a more effective cutting. NEW Arm construction allows for changing the machine from horizontal into vertical with workbench in just a moment. This is not only useful for metal cutting but also as a jigsaw machine for carpentry. Technical data Cutting band size 2360×20×0.9 mm Cjdpfx Aexqd T Tjdxjhd Band tension mechanical (manual) Band speeds 34, 41, 59, 98 m/min Feed speed 0-50 m/min (stepless feed) Arm lowering control stepless - hydraulic cylinder Vice base height 600 mm Power supply 230V Main motor power (kW) S1 100%: 0,75; S6 40%: 1.1 kW Weight 190 kg Dimensions 1250×700×1000 mm Warranty 12/24 months User manual yes CE Declaration yes Angle 0° 180 mm 180×210 mm 180×180 mm 45° 130 mm 140×90 mm 130×130 mm WARNING!!! THE MACHINE IS RETURNED, SERVICED, NO ORIGINAL PACKAGING.

Condition: good (used), Alber sharpening machine for band saw blades saw blade width 50 - 206mm Chsdpfxsglui As Adxjd tooth pitch 20 - 50mm

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, Version : with large sliding table and cutting line laser, Sold with / without suction unit. This would be suitable for sawing graphite . Special superstructures : Sliding table is designed for workpieces weighing up to 150 kg and with dimensions dimensions of W x D x H of 1500 x 600 x 450 mm High-quality, powerful extraction system from RUMAC, type DS 64000 M, 2.2 kW, protection class IP65 ; . Technical data of the saw : Saw band 4550 x 20 x 0,8 mm ( actual : WIKUS , type TCT ) Cjdpfjw Nvwvox Adxehd Roller guide 8 - 25 mm Cutting height max. 400 mm under the guide throat 630 mm Cutting speed approx. 250 - 2000 m/min , infinitely variable Drive power saw motor 4.0 kW Space requirement, W x D x H approx. 2 x 1.2 x 2.4 m plus extraction system Weight approx. 1.25 tons plus extraction system .

Condition: excellent (used), Year of construction: 2011, Vertical Wood Band Saw PROMAC SW-430 Codpew T Tpqofx Adxjhd Throat depth: 400 mm Table size: Depth 600 mm x Width 430 mm Tilting table from 0 to 40° Blades dimensions: Length 3330 x 15 mm x thickness 0,6 mm Maxi cutting height: 200 mm Steering wheels diameter: Ø 430 mm Voltage: 380 V Motor: 1,5 kW Width: 800 mm Depth: 900 mm Height: 1900 mm Weight: approx 150 KG Year of construction: 2011 (machine in very good condition) Supplied with 2 spare blades

Condition: new, Year of construction: 2025, S275 Metal Cutting Machine Motor Type - 3-phase induction motor Electrical connection - 400V 50/60Hz Power supply: 400V (three-phase) Protection - IP54 Power - 1.5 HP 1.1 kW Rated current - 400V - 3.6 Amp Speed ​​(RPM) - 50Hz - 2840/1420 Gearbox Transmission ratio - 50Hz - 1:30 Band saw Saw blade dimensions - 2480x27x0.9x6-10mm Blade guide wheel diameter - 293mm Saw blade speed - 50Hz - 45/90mm (m/min) Cooling System Pump Type – 230V 100W Pump Rated Current – ​​0.3 (Amp) Speed ​​– 50Hz-2840 (rpm) Tank Capacity – 10 liters Mechanical Data Dimensions with base – 1560x990x1665 (mm) Dimensions without base – 1320x510x755 (mm) Cedpfsxdbzbjx Adxehd Shipping Dimensions – 1380x570x890 (mm) Weight – Net – 185 (kg) | Gross – 200 (kg) Noise Level – 70 (dB) Fuse – max. 16 (Amps) Ambient Temperature – 5-35 (°C) Ambient Humidity – 25-80% General: Cutting Angle Adjustment: Via Swivel Arm Saw Blade Guides: Ball Bearing Guide Rollers Saw Arm Lift: Manual Feed: Continuously Adjustable Saw Blade Tension: Manually via Handwheel Band Guides with Bearings and Carbide Tiles Height from Floor to Vice: 910 mm

Condition: good (used), Table size: 900x900mm Projection: 630mm Cedpfelgvk Aex Adxohd

Condition: used, Year of construction: 2025, The CORMAK BS 260G band saws, due to being equipped with a hydraulic cylinder, a cooling and an arm swivelling up to 60°, together with blades from renowned German Röntgen company, are used commonly in ironworking where precision, quality and cutting speed are important. Horizontal band saw with a swivelling arm for cutting metals, allows for cutting in plane perpendicular to the axis of material cut and at any angle from 0 to 60º. Material for cutting can be fed manually or by any mechanical feeding device, with automatic tool feed. Band guides are equipped with dedicated carbide plates and bearings. This has a huge impact on band guiding, its durability, cut straightness, cutting accuracy and quality. Machine's arm is made of profiled CAST IRON. Control panel is located by the arm. The drive from the electric motor directed to the cutting band driving wheel is transmitted by a motor with worm drive. The cutting band is tensioned on two cast iron wheels with a manual tightener and guided by adjustable rolling and linear set of carbide guides. A separate flood coolant container with an electropump is inside. The arm lowering speed (the cutting speed) is adjusted with a hydraulic cylinder. The feed speed is controlled by the control panel. There are 2 cutting band speeds to choose from: 36 and 72 m/min. In rest arm position (after the cutting process) the cutting band drive is switched off automatically. Safety is ensured with cutting band guards and microswitches stopping the motor after cutting cycle is finished or after any of the guards are opened; additional protection consists of automatic switch-off of the band saw in case the cutting band breaks. Technical data Cutting band saw dimensions 2455×27×0.9 mm Band tension mechanical (manual) Band speed 36, 72 m/min Feed speed 0–50 m/min (stepless feed) Arm lowering control stepless – hydraulic cylinder Vice base height 900 mm Power supply 3-phase 400V Motor power 1.1 kW Weight 216 kg Warranty 12 months Manual yes Chsdsxn Itropfx Adxsd CE declaration yes Angle 0º ø230 260×150 225×225 45º ø165 180×130 165×165 60º ø105 100×90 110×110 *Please note that machine is sold without CEE connector by default, since there are many different types of it. If you would like to receive it with the machine, please write it to the seller before making a purchase/during order proceeding. WARNING! THE MACHINE IS RETURNED, SERVICED, NO PACKAGING.

Condition: excellent (used), Fully automatic band saw graderOppligerType PBS 860 Chodpfx Adjd Sr Siexjd

Condition: used, roll diameter / mm throat / mm workpiece height / mm With saw blade welder Mod: BSO Tape width: 16mm Volts: 360 Hz: 50-60 Amp: 5.2 . 91622F Saw blade length max.: 4250mm Saw blade length min.: 4150mm Codeikggdopfx Adxshd Table dimension: 600x600mm Max working length: 1120mm

Condition: used, Year of construction: 2025, Band saw for metal, with optimal cutting range, commonly used in carpentry, production and craft facilities. Machine description Universal CORMAK BS 712 A band saw with CE marking is a trusted solution for metal cutting, unparalleled for years. Features high efficiency and easy handling. Makes it possible to cut in vertical plane and perpendicular to the cut material axis, or at any angle in 45°–90° range. Element cut can be fed manually or by any feeding device. The feed during cutting is gravitational on the principle of oil flow in a two-chamber hydraulic cylinder. Suitable speed of arm lowering is obtained thanks to the valve controlling oil flow between the hydraulic cylinder chambers. Required band linear velocity is obtained by changing the ratio on the belt pulley between the worm gear and the driving motor. Rugged, stable and refined construction as well as the arm made of uniform cast iron provide high rigidity and stability while cutting, ensuring accuracy and long-term reliability. The design of the 20 mm saw blade used in the machine makes it possible to cut large quantities of elements. Technical data Cutting band size 2360×27×0.9 mm Band tension mechanical (manual) Band speeds 22, 33, 45, 65 m/min Feed speed 0–50 m/min (stepless feed) Cjdpfx Adowl Ea Texohd Arm lowering control stepless – hydraulic cylinder Power supply 3-phase 400V Main motor power 1.1 kW Weight 190 kg Angle 0°.....180 mm....300×180 mm.....180×180 mm 45°.....130 mm....120×125 mm.....125×125 mm Machine construction Cutting band transmission system is composed of two cast iron wheels. The first wheel is a tensioning wheel (adjusted with a lever) and the second one is a drive wheel. Torque from the worm gear is directly transmitted to the tensioning wheel, while the worm gear is driven by an electric motor. Appropriate band angle is ensured through a set of roller bearings. The base of the machine is a rigid cuboid made of steel sheets inside which is a cooling fluid container with a flood coolant pump. Due to swivel vice it is possible to cut material at 0°–45° angles. Tank for flood coolant draining and a container for chips are fixed to the upper part of the machine. Cast iron workbench is attached to the tank, which in turn is equipped with a vice for material clamping and to which the arm of the band saw is fixed. In the lower part of the machine base are holes for wheel axles. Safety during cutting process is ensured by an electric installation meeting all CE requirements. The machine is equipped with a limiting switch that stops the machine after cutting process is finished, an emergency button, a number of microswitches that switch the machine off when, e.g., the belt transmission guard or cutting band guard are opened. Additionally, our machine, as opposed to competitors, is equipped with a wire brush for band cleaning – it prevents the blade from blocking and ensures a more effective cutting. WARNING ! 3 ITEMS AVAILABLE: 1. MACHINE IS RETURNED, SERVICED, ASSEMBLED (poz.519) 2. MACHINE IS RETURNED, NO PACKAGING, DENTED MOTOR COVER ,COMPLETE, ASSEMBLED (poz. 518) 3. MACHINE IS RETURNED, NO PACKAGING, DENTED MOTOR COVER AND BELT COVER, ASSEMBLED (poz. 517)

Condition: new, Year of construction: 2025, CORMAK HBS275 band saw, equipped with a hydraulic cylinder, a cooling system and an arm swivelling up to 60º, together with blades from renowned German company Röntgen, is used commonly in ironworking, where precision, quality and cutting speed are essential. Horizontal band saw with a swivelling arm for cutting metals, allows for cutting in plane perpendicular to the axis of material cut and at any angle from 0 to 60º. Material for cutting can be fed manually or with any mechanical feeding device, with automatic tool feed. Band guides are equipped with dedicated carbide plates and bearings. This has a huge impact on band guiding, its durability, cut straightness, cutting accuracy and quality. Carbide guiding drastically reduces the wear of the machine and blades. Machine's arm made of uniform cast iron as well as a 27 mm wide cutting band are capable of low and high quantity cutting of profiles and other materials. The vice is located in an adjustable bed, equipped with a quick clamp. Blade guides have cemented carbide plates and roller bearings. Its these cemented carbide guides that provide cut precision and straightness. The arm, positioned at an angle of 25º, thus increasing blade durability, is equipped with an automatic blade tension sensor. To the bottom of the arm a brush wire is attached, ensuring clean and functional brush. Machine's drive is transmitted through a worm drive. A 3-phase motor with 2 cutting speeds and motor thermal protection. This cutting machine also has a strain gauge - a band tension sensor and an automatic switch-off in case the cutting band breaks. Upper part of the base constitutes a tank for flood coolant draining and chips produced during cutting. A cast iron workbench is attached to the base, with a swivel arm and control panel on separate arm. The main cutting move in the cutting process is moving the cutting band and the arm lowering feed. The arm lowering speed (the cutting speed) is adjusted with the hydraulic cylinder. The feed speed is controlled by the control panel. There are 2 cutting band speeds to choose from: 37.5 and 75 m/min. In rest arm position (after the cutting process) the cutting band drive is switched off automatically. Safety is ensured with cutting band guards and microswitches stopping the motor after cutting cycle is finished or after any of the guards are opened; additional protection consists of automatic switch-off of the band saw in case the cutting band breaks. Chodpfx Asudi Unsdxed Technical data Total power 1.5 kW Power supply 400V 50Hz Arm lowering control hydraulic cylinder Band dimensions 2455 x 27 x 0.9 mm Band speed 37.5/75 m/min Vice base height 900 mm Weight 215 kg Angle 0º ø220 260 x 140 200 x 200 45º R ø160 160 x 140 160 x 160 60º R ø100 120 x 100 100 x 100

Condition: new, Year of construction: 2025, The CORMAK BS 260G band saws, due to being equipped with a hydraulic cylinder, a cooling and an arm swivelling up to 60°, together with blades from renowned German Röntgen company, are used commonly in ironworking where precision, quality and cutting speed are important. Horizontal band saw with a swivelling arm for cutting metals, allows for cutting in plane perpendicular to the axis of material cut and at any angle from 0 to 60º. Material for cutting can be fed manually or by any mechanical feeding device, with automatic tool feed. Band guides are equipped with dedicated carbide plates and bearings. This has a huge impact on band guiding, its durability, cut straightness, cutting accuracy and quality. Machine's arm is made of profiled CAST IRON. Control panel is located by the arm. The drive from the electric motor directed to the cutting band driving wheel is transmitted by a motor with worm drive. The cutting band is tensioned on two cast iron wheels with a manual tightener and guided by adjustable rolling and linear set of carbide guides. A separate flood coolant container with an electropump is inside. The arm lowering speed (the cutting speed) is adjusted with a hydraulic cylinder. The feed speed is controlled by the control panel. There are 2 cutting band speeds to choose from: 36 and 72 m/min. In rest arm position (after the cutting process) the cutting band drive is switched off automatically. Safety is ensured with cutting band guards and microswitches stopping the motor after cutting cycle is finished or after any of the guards are opened; additional protection consists of automatic switch-off of the band saw in case the cutting band breaks. Technical data Cutting band saw dimensions 2455×27×0.9 mm Band tension mechanical (manual) Band speed 36, 72 m/min Feed speed Chodovuf S Nspfx Adxsd 0–50 m/min (stepless feed) Arm lowering control stepless – hydraulic cylinder Vice base height 900 mm Power supply 3-phase 400V Motor power 1.1 kW Weight 216 kg Warranty 12 months Manual yes CE declaration yes Angle 0º ø230 260×150 225×225 45º ø165 180×130 165×165 60º ø105 100×90 110×110 *Please note that machine is sold without CEE connector by default, since there are many different types of it. If you would like to receive it with the machine, please write it to the seller before making a purchase/during order proceeding.