CNC Machine Centres With Pod And Rail

WEEKE VENTURE 3 L

Condition: used, Year of construction: 2011, Base Machine M800 X5 TV 1 WORKING RANGE X: 5,020 mm Y: 1,830 mm Z: 675 mm Clearance Height: 300 mm (from 50 mm suction cup height) MACHINE STRUCTURE The base structure is a monolithic construction made from thick-walled steel. It is reinforced across the entire machine bed with welded components, providing exceptional stability. The table design, with its large base, is the key to ensuring lasting precision and stability. The machine’s layout enables the operator to achieve optimal workflow with minimal space requirements. The mobile gantry is built as a solid monoblock. It is positioned in the X direction on prismatic, ground guides with recirculating ball carriages. The machining unit is mounted on this mobile support carriage, also on prismatic, ground guides and recirculating ball carriages. AXIS MOVEMENT All axes travel on prismatic linear guides with large cross-section and recirculating ball shoes with a wide contact surface, which ensures optimal sliding, even at high speeds and accelerations. The precise and fast positioning of the movable gantry (X-axis) is achieved via helical rack and pinion. Large cross-section recirculating ball screws ensure accurate positioning of the machining unit along the movable gantry (Y and Z axes). The perfect mechanical dynamics and maximum positioning accuracy are controlled by high-quality drives and brushless motors. Max. axis speeds: · X-axis = 90 m/min · Y-axis = 90 m/min · Z-axis = 30 m/min Safety device with bumper and light barrier 1 Bumpers with sensors are fitted to the movable upright, and a light barrier system is installed at the front of the machine. If the operator enters the active zone, the X-axis travel speed is reduced to a lower value of 25 m/min without stopping the machine. This system allows parts to be loaded during pendulum operation without the limitation of access areas, as seen with pressure mat systems. This prevents unwanted interruptions in the machining cycle and offers greater freedom of movement around the worktable. CE certification for the safety system 1 Safety protection fence 1 Side and rear protection fence Automatic central lubrication controlled via CNC 1 The lubrication of the X, Y, and Z axes is controlled by the CNC; intervals are regulated automatically, without manual intervention. Central extraction connector 1 All individual extraction connections of the machining units are collected into a central extraction port. Inside the port, there are various slider valves controlled by the NC. This reduces the required extraction air volume. Chip conveyor 1 Maxi – 5-axis electrospindle 11 kW HSK-63 “Prisma K 1 5-axis electrospindle, 11 kW at 20,000 rpm S1 (100% duty cycle) Speed: max. 20,000 rpm Rotation direction: left/right Liquid cooling Tool interface HSK 63F Inverter 18 kW, stepless, smooth power delivery Max. rotation B-axis = 200° (+-100°) C-axis = 650° Thanks to the non-orthogonal axes, it is possible to perform complex horizontal positioning in a small workspace. This enables the machining of complex geometries without the risk of collision. Kedpfx Ajxy Tmnjblelt

Condition: used, machine/vehicle number: 007716, X axis working area: 3250 mm Y axis working area: 1220 mm Working Table: Pod and Rail Main Electrospindle power: 12 KW Number of controlled axes: 4 axes Total number of drilling spindles: 18 Total number of tool changer positions: 16 Kodswuz N Nspfx Ablslt

Condition: ready for operation (used), Year of construction: 2009, Travel ranges working area 1: X: 6450mm, Y: 1535mm, Z: 250mm, working area 2: X: 6200mm, Y: 1535mm, Z: 250mm, working area 3: X: 6200mm, Y: 1520mm, Z: 275mm, axis travel configuration 1: X: 6820.5mm, Y: 1963mm, Z: 350mm, axis travel configuration 2: X: 6820.5mm, Y: 1963mm, Z: 350mm, axis travel configuration 3: X: 6820.5mm, Y: 1963mm, Z: 663mm (5-axis head), Z: 350mm (additional machining units), control: Biesse XP600. Maintenance: complete C-axis was replaced in 2015 including accessories, vacuum pump was fully replaced in 2016 including bellows, hoses and additional components, in 2021 the machine was equipped with a new high-performance control PC running a current Windows 10 operating system. With extensive documentation. An on-site inspection is possible. Kedpfx Aboylziielolt

Condition: used, Year of construction: 2005, Processing size: 3000 x 1600 x 180 mm High-pressure pump 60 HP / 45 kW Model E-60 Operating pressure 4,130 BAR Water consumption 4.69 liters/min. Software: Watercad-CAM Automatic cutting optimization Storage location: customer Kljdpexgfbqsfx Abljt

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, power: 8 kW (10.88 HP), input voltage: 400 V, input frequency: 50 Hz, Equipment: documentation/manual, OPTIMAT BHX055 Kjdpsyvh Dpsfx Abljlt

Condition: excellent (used), Gantry (Portal) machine Movable panel (workpiece), movable working head (Horizontal position of the panel/workpiece) Numerical Control Power Control, Software WoodWOP Safety cabin (enclosure) of the working head and integral safety cabin (enclosure) of the machine In-feeding working table (panel support). Out-feeding working table (panel support) Panels (workpieces) feeding by No. 3 motorized belts - Feeding speed (m/min) max 130 ca. Minimum workpieces dimensions (X - Y - Z) mm 250 x 100 x 15 Maximum workpieces dimensions (X - Y - Z) mm 2500 x 1050 x 60 Motorized carpet to evacuate chips and wastes. Separate electric and command cabinet Total installed power: Kw 99 N° 2 WORKING GROUPS (TOP) - (SERVO-MOTOR X-Y-Z ): N° 4 Drilling heads (4 x Kw 2.3) with No. 10 vertical spindles each (total top spindles No. 40) N° 3 WORKING GROUPS (BOTTOM) - (SERVO-MOTOR X-Y-Z ) : N° 6 Drilling heads (6 x Kw 2.3) with No. 40 vertical spindles each (total bottom spindles No 240) N° 2 WORKING GROUPS (HORIZONTAL) N° 2 Drilling heads with horizontal spindles N° 21 Horizontal drilling spindles (Right Side) + N° 21 Horizontal drilling spindles (Left Side) N° 8 Dowel Inserting nozzle & glue injectors(Right side) + N° 8 Dowel Inserting nozzle (Left Side) N° 2 Storage tanks for automatic feeding of the dowels OPTIONAL: WIRELESS BAR CODE SCANNER Kledpogwbbqefx Ablst

Condition: ready for operation (used), Year of construction: 2021, travel distance X-axis: 4,000 mm, travel distance Y-axis: 1,670 mm, travel distance Z-axis: 500 mm, number of axes: 4, This 4-axis CNC processing center was manufactured in 2020. It features a 12 kW milling spindle with a speed range of 1000-24000 rpm and a C-axis rotation of 0-360°. The machine includes a 12-station linear tool changer and a comprehensive drill head with 16 spindles. It also boasts a robust safety system with a light barrier. Consider the opportunity to buy this Felder Format 4 Profit H 200 CNC processing center. Contact us for more information about this machine. • Automatic central lubrication • Working area: X 3300 mm / Y 1280 mm / Z 250 mm (clearance height from console level depends on clamping system) • Operating terminal on left side of machine • Hand terminal with axis speed control and emergency stop • Software: Woodflash (CNC board, tool database, program editor) • Positioning display for workpiece support and vacuum suction cups • Vacuum connection for template milling (left side), connection diameter 12 mm • Vacuum pump: 1x, total suction power 90 m³/h @ 50 Hz or 108 m³/h @ 60 Hz Kedpfx Abex D D Hmoljlt • Milling spindle: 12 kW (S6), HSK F63, 1000–24,000 rpm, full rated power at ~12,000 rpm, air-cooled; C-axis 0–360° • Tool changer: 12-station linear on left side of machine stand, incl. pickup space for aggregates; max tool diameter 250 mm; max tool length 240 mm • Drill head DH 16 4H 2S: 12 vertical spindles (7X / 5Y); 4 horizontal spindles (2X / 2Y); pre-stroke 70 mm; drilling length 70 mm; shank Ø 10 mm • Groove saws: 2 (one X, one Y); max blade Ø 120 mm; max thickness 5 mm; continuously variable speed up to 7,500 rpm • Safety: front light barrier system

Condition: new, Bernardo frame saw Topcut 3200 ER Technical Specification Table dimension 1100 x 735 mm Format table 3200 x 400 mm Trimming length 3200 mm Max saw blade diameter 400 x 30 mm Max cutting height 90° / 45°125 / 88 mm Cutting width at the parallel stop 1300 mm Table height 890 mm Table extension 600 x 615 mm Table widening 825 x 750 mm Boom table with roll 1240 x 860 mm Speed Main saw blade 3000 / 4000 / 5000 rpm Speed scoring saw blade 8000 rpm Scribble saw blade 120 x 20 mm Kledpjd N S T Dofx Ablot Suction connection of 100 mm Engine power S1 100% 5.5 kW (7.5 hp) Engine recording power S6 40% 7.5 KW (10.0 hp) Scoring motor power 0.75 kW Voltage 400 V Machine dimensions (W x D x H) 3420 x 3600 x 1610 mm Weight approx. 850 kg Delivery • Electric saw blade height adjustment • Digital cutting height display • Saw blade cover with inlet roller • Miter stop • Eccentric tensioner • Table widening • Extendable telescopic stop • Longitudinal stop flaps • Boom table with roller • Sliding stick • Scoring unit with independent motor • Operating tool Properties • High-torque drive motor (5.5 kW) powerful drive motor, designed for optimum cutting performance • Smooth-running double roller trolley with center and end position locking for precise cuttings • Maximum saw blade diameter 400 mm for cutting heights up to 125 mm • Boom table with roller for simplified handling of larger workpieces • Foldable parallel stop with mik

Condition: used, Year of construction: 2014, total height: 2,800 mm, total length: 6,900 mm, total width: 2,800 mm, Colour: Grey Empty weight: 6.100 kg - Details: - └ Description: Needs repair to B-axis and leaks to seals - Year: 2014 - Documentation available: No - CE certificate present: No - Serial number: 10333 - Number of milling spindles [pcs.]: 2 - └ Milling spindle 1: Kjdpfeyr Rnusx Ablelt - - Number of controlled axes [pcs.]: 5 - └ Milling spindle 2: - - Number of controlled axes [pcs.]: 3 - Type milling table: Beam table - Drilling unit present: Yes - Tool changer positions [pcs.]: 45 - Vacuum pump present: Yes - └ Number [pcs.]: 2 - └ Brand: Becker - └ Type: Vtlf 2.250 - └ Year of manufacture: 2011 - └ Main motor power [kW]: 5.5 - └ Capacity [m³/h]: 244 - └ Connection diameter [mm]: 60 - └ Vacuum pressure [bar]: 200 - └ Oil free: Yes - Tools included: Yes - Table length [mm]: 4800 - Table width [mm]: 1500 - Voltage [V]: 400 - Current consumption [A]: 39 - Fuse [A]: 63 - Power [kW]: 22.8 - Transport dimensions: 6900mm x 2800mm x 2800mm (l x w x h) - Transport weight [kg]: 6100kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Glenn Smeets

Condition: ready for operation (used), Year of construction: 2007, travel distance X-axis: 4,600 mm, travel distance Y-axis: 1,935 mm, travel distance Z-axis: 275 mm, number of axes: 5, This 5-axis Biesse Rover C9.50 was manufactured in 2007. It features a large working area (X=4600 mm, Y=1935 mm, Z=275 mm), an automatic lubrication system, and a control unit for 5-axis interpolation. The machine includes a vacuum system, a conveyor belt for chip removal, and a liquid cooling unit. If you are looking to get high-quality CNC machining capabilities, consider the Biesse Rover C9.50 machine we have for sale. Contact us for more information. Worktable and clamping • 8 ATS plate holders (L = 1525 mm) and 24 slide rails • Automatic positioning of plate holders and slide rails (EPS X-Y) • Pneumatic locking system, divided into 2 working areas in X • 8 rear reference stops, stroke 115 mm • 8 stops, stroke 140 mm, positioned at 1175 mm (L = 1280 / 1525 / 1800 mm) • 8 stops, stroke 140 mm, positioned at 770 mm (L = 1280 / 1525 / 1800 mm) • 4 side stops, stroke 140 mm (2 left + 2 right), with pneumatic system • 4 removable center stops, stroke 140 mm (2 left + 2 right), with pneumatic system • Sensor for detecting lowered stops • Pneumatic system for lifting bar holders • 6 lifting bar holders for easy loading (H = 74 mm modules)Vacuum • Vacuum system for a 250 m3/h pump • 250 m3/h rotary vane vacuum pump for standard vacuum systemMachining units and configuration • Composition C3-A1: • Device for mounting chip deflectors with pneumatic or inductive sensors on a 5-axis machining unit • Flange for mounting units on a work unit with 5 interpolating axes (units usable only when the electric spindle is vertical) • Composition C3-P2: • Additional Z slide for rear work units, controlled by an independent Z axis • 16 vertical and 4 horizontal boring spindles in Y-direction • Chain tool changer with 22 positions (180 mm center distance) • Iron gripper for chip deflector with pneumatic or inductive sensor, positioned in the chain tool changer • RH chip deflector with inductive sensor for standard electric spindle or 15 kW 5-axis electric spindle (requires device for chip deflector; requires flange for mounting units when using a 5-axis electric spindle; requires C-axis when using a standard electric spindle)Systems • Automatic lubrication system • Control unit with 5 interpolating axes Additional equipment Klodpfx Absx D H Hceljt • additional refurbished 5-axe main spindel available • Conveyor belt for removing chips and scrap pieces (chip conveyor) • Liquid cooling unit for liquid-cooled systems (can cool two electric spindles, or one electric spindle plus one liquid-cooled drilling head)Note: The technical data and descriptions are taken from the original order confirmation and are for information only; they are not binding.