Used Ventrac 3200 for sale (1,215)

Condition: as good as new (ex-display), Fronius TPS 3200 ✅ Scope of delivery: ➤Fronius TPS 3200 power source (320A TRANS PULS SYNERGIC) ➤Fronius FK 4000 FC cooling unit – Equipped as standard with Flow Control, Thermocontrol, and a coolant filter. The cooling unit shuts off if the water cooling fails or overheats to protect the hose assembly. These features cost approximately €400 more from Fronius. ➤Fronius VR 7000 wire feed case – Compact and practical – in our opinion, the most useful feed case – the wire is safely stored in the enclosed case. ➤Fronius long intermediate hose package – each device is delivered with a 5-meter-long connecting hose package between the power source and the wire feed case for greater flexibility and better handling. Take the wire feed case with you to places that are difficult to reach! The connecting hose assembly is neatly attached to a hook on the side of the device. (Hooks are manufactured by us.) ➤ Large Fronius trolley – Arguably the best trolley with a gas cylinder holder on the market. ➤ Binzel hose assembly – With up/down amperage adjustment on the torch. ➤ Ground cable 3-4m ➤ New Messer pressure regulator ➤ New basket spool adapter for large wire spools This device can weld almost all materials, including aluminum, steel, and stainless steel (V2A). It features feeler wire programs and is also suitable for MIG brazing (Cusi), which is frequently used in the sheet metal industry. Additional options are available for an additional charge. e.g., Fronius Job Master hose package (display on the torch) + EUR 500.00 ----- IMMEDIATELY AVAILABLE PROPER INVOICE A viewing is possible in Austria in Vienna 1230! ✔ Insured shipping on a pallet is no problem! ✔ We can also be reached via WhatsApp and Viber. ✅Questions✅Questions✅Questions✅ Questions: ✅Questions✅Questions✅ Questions✅ ►►►What is the condition of the devices? To explain, we buy like-new used devices, disassemble them, check everything, replace any wear parts if necessary, and only then, after a successful test weld, are they released for sale. "All" devices are clean and have neither burn holes in the displays nor countless burn holes or dents scattered throughout the device! You're buying an item from us that's ⭐worth seeing and doesn't look completely finished! ►►►Do we receive an invoice when we buy from you? Yes, we provide a proper invoice. If you have a valid VAT ID, we can issue a net invoice if the requirements for intra-community delivery within the EU are met. Itjdpfowbilxex Amisg ►►►What payment options are available? Advance payment or cash upon personal pickup ►►►Why buy from us? We are experts in this Fronius welding machine series and always have 60-80 devices in stock – exclusively Fronius, no other manufacturers! We are experts in these devices and don't sell anything we don't know anything about.

Condition: as good as new (ex-display), ►►► FRONIUS TPS 3200 SET OFFER €3,290 net including BINZEL UP DOWN HOSE PACK or Itodswbillopfx Amisg Fronius AW hose package with display on the torch including connection conversion (+€500) ✅ Scope of delivery: ➤Fronius TPS 3200 power source (320A TRANS PULS SYNERGIC) ➤Fronius FK 4000 FC cooling unit – Equipped as standard with Flow Control, Thermocontrol, and coolant filter. The cooling unit shuts off if the water cooling fails or overheats to protect the hose package. These features cost approximately €400 more from Fronius. ➤Fronius VR 7000 wire feed case – Compact and practical – in our opinion, the most useful wire feed case – the wire is safely stored in the enclosed case. ➤Fronius Intermediate Hose Package (Long) – Each device comes with a 5-meter-long connecting hose package between the power source and the wire feeder case for greater flexibility and better handling. Take the wire feeder case with you to places that are difficult to reach! The connecting hose package is neatly attached to a hook on the side of the device. (Hooks are manufactured by us.) ➤Fronius Large Trolley – Arguably the best trolley with gas cylinder holder on the market. ➤Binzel Hose Package – With up/down amperage adjustment on the torch. ➤3-4m Earth Cable ➤New Messer Pressure Regulator ➤New Basket Spool Adapter for Large Wire Spools This device can weld almost all materials, including aluminum, steel, and stainless steel (V2A). It features tracer wire programs and is also suitable for MIG brazing (Cusi), which is frequently used in the sheet metal industry. Additional options are available for an additional charge. e.g., Fronius Job Master hose package (display on the torch) + EUR 450.00 The first 10 buyers of a device will receive an additional --> 2nd hose package free Currently 30+ ⭐TPS 3200 SET⭐ in stock ----- Debsum Rw Dokh Hufpokk AVAILABLE FOR IMMEDIATE DELIVERY PROPER INVOICE A viewing is possible in Austria in Vienna 1230! ✔ Insured shipping on a pallet is no problem! ✔ We can also be reached via WhatsApp and Viber. ✅Questions✅Questions✅Questions: ✅Questions✅Questions✅ Questions: ✅Questions✅Questions✅ ►►►What is the condition of the devices? To explain, we buy like-new used devices, disassemble them, check everything, replace any worn parts if necessary, and only then, after a successful test weld, is the device released for sale. "All" devices are clean and have neither burn holes in the displays nor countless burn holes or dents scattered throughout the device! You're buying an item from us that's ⭐worth seeing and doesn't look completely finished! ►►►Do we receive an invoice when you purchase from us? Yes, you receive a proper invoice from us. If you have a valid VAT ID, we can issue a net invoice if the requirements for intra-community delivery within the EU are met. ►►►What payment options are available? Prepayment or cash upon personal pickup ►►►Why buy from us? We are experts in this Fronius welding series and always have 60-80 devices in stock – exclusively Fronius, no other manufacturers! We know about these devices and don't sell anything we don't know about.

Condition: as good as new (ex-display), ►►► FRONIUS TPS 3200 SET OFFER ✅ Scope of delivery: ➤ Fronius TPS 3200 Power Source (320A TRANS PULS SYNERGIC) ➤ Fronius FK 4000 FC Cooling Unit – Standard features include Flow Control, Thermocontrol, and coolant filter. The cooling unit shuts off if the water cooling fails or gets too hot, to protect the torch package. These functions cost approximately €400 extra from Fronius. ➤ Fronius VR 7000 Wire Feed Case – Compact and practical – in our experience, the most useful wire feed case – the wire is securely stored in the closed case. ➤ Fronius Intermediate Hose Package, long version – each machine is supplied with a 5-meter-long connection hose between the power source and the wire feed case for greater flexibility and improved handling. Take the wire feed case off the machine to access hard-to-reach areas! The connecting hose is neatly stored on a hook on the side of the machine. (Hooks are produced by us) ➤ Fronius Large Trolley – Probably the best trolley with a gas bottle holder on the market. ➤ Binzel Torch Package – With up/down amperage control on the torch. ➤ Ground cable 3-4m ➤ New Messer pressure regulator ➤ New basket reel adapter for large wire spools Iedpfx Amjwbil Seijtg With this machine, almost all materials can be welded, including aluminum, steel, and stainless steel (V2A). It features pulse wire programs and is also suitable for MIG brazing (CuSi), commonly used in the sheet metal industry. Additional options are available at extra charge For example: Fronius Aw4000/Aw5000 Job Master Torch Package (with display on torch) + EUR 550.00 ----- IMMEDIATELY AVAILABLE PROPER INVOICE Inspection is possible in Austria, Vienna 1230! ✔ Insured shipping on a pallet is no problem! ✔ We are also available via WhatsApp and Viber. ✅Questions✅Questions✅Questions✅Questions: ✅Questions✅Questions✅Questions✅ ►►► What is the condition of the equipment? For clarification: we purchase nearly new used equipment, disassemble and thoroughly inspect everything, replace wear parts as necessary, and only after a successful test weld do we release the equipment for sale. "All" machines are clean with no burn marks on the displays and without numerous burn holes or dents! With us, you buy an item that is ⭐in excellent condition and doesn’t look worn out! ►►► Do we receive an invoice when purchasing from you? Yes, you will receive a proper invoice from us. If you have a valid VAT ID and meet the requirements for intra-community delivery within the EU, we can issue a net invoice. ►►► What payment options are available? Prepayment or cash on personal collection. ►►► Why buy from us? We are experts in this series of Fronius welding machines and always have 60-80 units in stock – exclusively Fronius, no other brands! We know these machines inside out and do not sell anything we don’t have expertise in.

Condition: ready for operation (used), Year of construction: 2005, operating hours: 28,246 h, functionality: fully functional, travel distance X-axis: 3,200 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 1,600 mm, table load: 20,000 kg, overall weight: 28,000 kg, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS X-axis travel: 3,200 mm Y-axis travel: 2,000 mm Z-axis travel: 1,600 mm B-axis: 360° C-axis: 360° Itjdpoy R Dpkefx Amijg Spindle taper: SK 50 Rotary table (L x W): 2,500 x 2,000 mm Table load capacity: 20,000 kg Tool magazine: 100 pcs. MACHINE DETAILS Dimensions & weight Dimensions (L x W x H): 7,300 x 7,700 x 4,350 mm Machine weight: 28,000 kg Operating hours Operating hours: 75,377 h Spindle hours: 28,246 h EQUIPMENT H- / V- head

Condition: ready for operation (used), Year of construction: 2004, operating hours: 23,291 h, functionality: fully functional, travel distance X-axis: 3,200 mm, travel distance Y-axis: 1,400 mm, travel distance Z-axis: 750 mm, table length: 3,200 mm, table width: 1,400 mm, TECHNICAL DETAILS X-axis travel: 3,200 mm Y-axis travel: 1,400 mm Z-axis travel: 750 mm Table size: 3,200 x 1,400 mm MACHINE DETAILS Control type: CNC Control system: Heidenhain Operating hours Spindle run time: 23,291 h Itjdpjy R Dn Hefx Amiog Program run time: 27,807 h Control on time: 83,301 h Machine on time: 73,907 h

Condition: excellent (used), functionality: fully functional, Year of construction: 2006, control type: CNC control, degree of automation: semi-automatic, actuation type: hydraulic, controller manufacturer: Schroder, controller model: POS 2000, working width: 3,200 mm, folding beam adjustment: 300 mm, installation height: 1,737 mm, sheet thickness (max.): 3 mm, sheet thickness steel (max.): 2 mm, sheet thickness aluminum (max.): 3 mm, back gauge adjustment: CNC-controlled, overall weight: 4,380 kg, total length: 4,568 mm, total width: 2,450 mm, total height: 1,737 mm, input voltage: 400 V, type of input current: three-phase, Equipment: CE marking, emergency stop, foot remote control, 2006 Schröder SPB 3200 x 3.0 CNC Folder – POS2000 Control – Very Good Condition Machine Manufacturer: Schroder Machine Model: SPB 3200 x 3.0 CNC Folder Machine Type: CNC Sheet Metal Folder Year: 2006 Condition: Very good High-Quality Used CNC Sheet Metal Folder for Sale in Ireland Used Machine Tools Ireland is pleased to offer this 2006 Schröder SPB 3200/3.0 CNC Folder, a high-precision universal sheet metal folding machine from one of Europe’s most respected manufacturers. This machine is in very good condition and is fully equipped with sharp tooling, box & pan tooling, and extra bending rails, making it ideal for both standard and complex folding applications. The control screen has been upgraded to a larger display, improving visibility, usability, and operator comfort. Key Features & Benefits Schröder SPB 3200/3.0 CNC Folder 3200 mm working length 3.0 mm mild steel capacity Schröder POS2000 CNC control Upgraded large control screen Includes extensive tooling package Rear roller support table fitted Heavy-duty industrial build Excellent accuracy & repeatability Ideal for fabrication, HVAC, cladding & precision sheet metal work Iodpfxjyakn Re Amiotg Included Tooling & Equipment Rear Roller Support Table Box & Pan Folding Tooling Sharp Sheet Metal Folding Tool Extra Bending Bars / Rails This tooling package allows for maximum flexibility, from straight folds to boxes, pans, trays, and complex profiles. Technical Specifications – Schröder SPB 3200/3.0Machine Type: Universal CNC Sheet Metal Folder Year: 2006 Control: Schröder POS2000 Condition: Very Good Capacity Usable working length: 3200 mm Maximum sheet thickness: 3.0 mm Beam & Adjustment Upper beam daylight: 300 mm Vertical adjustment of bending beam: 300 mm Drive & Power Upper beam drive: 4.4 kW Bending beam drive: 4.4 kW Nominal power: 9 kVA Pneumatics: 6 bar Machine Dimensions Machine length: 4568 mm Machine width: 2450 mm Machine height: 1737 mm Machine weight: 4380 kg Ideal Applications Sheet metal fabrication HVAC ducting & panels Architectural metal & cladding Enclosures, trays & cabinets General engineering & contract folding Why Buy From Used Machine Tools Ireland? Trusted Irish supplier of quality used CNC machinery Machines inspected & honestly described Nationwide & export delivery available Competitive pricing Notes: *Specifications are given in good faith but not guaranteed*

Condition: used, Year of construction: 2016, // Equipment dismantled and stored in our warehouse // Manufacturer: Italvacuum Model: Cosmodry System IHD 3200 Year: 2016 Type: horizontal vacuum paddle dryer Application: drying wet powders ATEX (Eex) unit: yes Industries: Fine chemicals, pharmaceuticals (API), intermediates A) Agitation: Concentric agitator with heated shaft, removable in several segments (double mechanical seal) Transmission: (CEMP) - Power 30 kW + Gearbox + Chain Agitation speed: 1.6 ÷ 8.1 rpm Atex: explosion-proof ATEX II 2GD Mounted with the dryer on a support structure (single SKID) B) Drying chamber with discharge valve Total volume : 3200 Liters Useful volume : 30% - 80% Internal pressure : -1 / 0,5 barg Jacket pressure : 0 / 1,7 barg Project temperature : -10 / +130°C Maximum heating fluid temperature: +100°C Best vacuum tightness: 4 mbar/h EX-I absolute pressure transmitter PT100 Ex-i product temperature sensor Nitrogen backwash system Rotary chopper speed: 300 / 1200 rpm (not installed) Material in contact with the product: AISI 316L - EN 1.4404 Vacuum seals: PTFE and FEP Jacket material: AISI 304 - EN 1.4301 Heating fluid: Diathermic oil Mirror-polished interior finish (Ra ≤ 0.4 µm) Satin exterior finish (Ra ≤ 1.2 µm) Inspection and Shut-off Valve DN.1650 Buffer Relief Valve DN 200/300 DN 250 Butterfly Loading Valve Prepared for the installation of two choppers (lateral knives) C) Process filter D) Vacuum unit: SAURUS939 piston vacuum pump, model VVD Pump support bench ATEX: Ex-d-IIB-T4 – IP55 Power: 11 kW Atmospheric pressure surface condenser, model VD200I E) Vacuum condensing unit - AISI 316L stainless steel with double cooling jacket in AISI 304 stainless steel. Internal design pressure: -1 / 0.5 barg Jacket design pressure: 0 / 3 barg Design temperature: -10 / 40 °C Maximum cooling liquid pressure: 2.5 bar Exchange surface area: 8.5 m2 Isdpfx Amjx R D Efoijtg Condensate collection capacity: 900 litres Level sensor F) External safety filter G) Temperature control system: Heating/Cooling Steam liquid heater: Pressure 7 bar - Jacket temperature: 142°C - Surface area: 1.65 m2 Cooler, mounted on the heater: cold water or brine - Pipe jacket pressure: 12 barg - Jacket temperature: 142°C - Pipe temperature: -10°C /+ 99°C - Surface area: 3.42 m2 H) Command and Control System (Electrical Cabinet + HMI) Complete technical file

Year of construction: 1981, condition: excellent (used), Dorries CNC Vert. boring mill single column with displaceable table - Make : Dörries - Germany - Typ : CTE 320 / 3400 - Age : 1981 – Ex. Aerospace ! - Serial.No : D 149 / 5079 - Chuck Ø : 3.200 - Max. turning Ø Pos. 2: 5.100 - Max. turning height : 2.650 - Stroke Tool holder : 1.250 - Crossrailadjustment : 1.500 - Table load : 60.000 - Tool shank size : 40 x 40 Ijdpokwcpxefx Amietg - Max. cutting power : 75000 - Max. torque on table : 60000 - Power main motor : 75 kW / 415 - Speeds 1 / 2 / 3 Range: 0,8 – 100 - Feeds Vario : 0,1 – 1.000 - Rapid Feed : 6.000 - Dimensions: 9,30 X 6,10 X 6,30 X 60 - CNC Siemens Sinumriek System 8 - Tool changer 16 positions - SCR Feed drives / each Axis own - Ballcrews + Slide roller guideways - Displaceable table hydraulic / manuel - Circular interpolation Please Note: The above information has been obtained to the best of our ability and belief from, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details

Condition: excellent (used), Year of construction: 1996, pressure: 13 bar, operating pressure: 13 bar, 1 used steam boiler ----- Make: LOOS, Gunzenhausen Type: U-HD Heating surface approx.: 53 m² Isdpfsv I Rpasx Amijtg Output: 3,200 kg/h Max. operating pressure: 13.00 bar Increased test pressure: 24.05 bar Water capacity at low water level approx.: 2,650 l Water capacity when full approx.: 3,770 l Year of construction: 1996 Equipped with a Weishaupt gas/oil combi burner, gas control system, control cabinet mounted on the boiler body, feedwater pump, and the existing coarse and fine valves.

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, 1 used steam boiler ----- - mounted on frame - - with integrated economizer - Iodpfxoxnxdho Amiotg Manufacturer: LOOS, Gunzenhausen Type: UL-S 3200 Output: 3,200 kg/h Permissible operating pressure: 13 bar Increased test pressure: 24.7 bar Total water content, approx.: 4,830 l Year of manufacture: 10 / 2006 CE marking: CE 0036 Equipped with Weishaupt gas-/oil burner GL9/1-D/TMD, separate control cabinet, feed water pump, and existing coarse and fine fittings. Integrated economizer type Eco1: Permissible max. pressure: 31 bar Test pressure: 56 bar Permissible max. temperature: 238°C Thermal output: 124 kW Total volume: 81 ltr

Condition: like new (used), Year of construction: 2010, CNC controller: FANUC FS-31iA5 (MAPPS 4) Capacity X-axis travel mm: 685 Y-axis travel mm: 125 Z-axis travel mm: 1075 Turning length mm: 1045 Max. turning diameter mm: ø: 600 Bar work capacity mm: 65 Turn-mill spindle Full indexing specifications: YES B-axis degree: 120º FULL INDEXING SPECIFICATION Speed spindle rpm: 12000 Drive power kW: 18.5/11 Tool magazine Magazine places: 80 Tool holder: CAPTO C5 Tool length max. mm: 250 Tool diameter max. mm: 70/130 Tool weight max kg: 5 Lower turret Number of tool slots St .: 12 Drive power driven tools kW: 5.5/3.7 Main spindle Speed spindle rpm: 5000 Drive power spindle kW: 25/22 (100%/40%ED) Spindle bore mm: 73 Chuck type: HOLLOW CHUCK (8") Manufacturer: KITAGAWA Counter spindle Speed spindle rpm: 5000 Drive power spindle kW: 25/22 (100%/40%ED) Spindle bore mm: 73 Chuck type: HOLLOW CHUCK (8") Manufacturer: KITAGAWA Equipment Electronic Handwheel Chip conveyor Swivel head Signal lamp High pressure pump Mist collector Workarea light CE conformity Chuck foot switch (double) for main and counter spindle Coolant gun Toolholders are not included Precision NC rotary table, rapid traverse and feed rate 100 1/min incl. direct measuring system Oil skimmer Linear scales Gantry loader LG-10 AII RENISHAW MP700 Working time hours Under power: 76.510 Spindle 1: 11.521 Spindle 2: 9.271 Iodpjwwuaaofx Amiotg Potencial nominal kVA: 102 Basic machine dimensions / weight Length mm: 8.000 Width mm: 4.000 Height mm: 3.000 Weight kg: 15.000

Condition: ready for operation (used), Fanuc A16B-3200-0042 / 02A - A16B-3200-0042/02A CPU Board, serial number as per photo, used, normal signs of use, 100% functional, scope of delivery as per photos Isdpfx Amji D U D Reistg

Condition: good (used), Year of construction: 2005, functionality: fully functional, pressing force: 320 t, installation height: 615 mm, control type: CNC control, Bending length [mm] 4220.00 Iodpfx Asy Sarqemiotg Press force [tons] 320 Control unit TRUMPF TASC 6000 Hydraulic hours [h] 53,030 Standard equipment: - Rigid machine frame, all-steel welded construction - Press beam with high bending strength - Spherical mounting of the press beam with beam tilt capability - Electro-hydraulic top drive with 4-cylinder technology - Proportional valve technology and switchable double pump - Modern block hydraulics with control valves mounted on the cylinder - Electronic pressure scale - Measuring system with centrally mounted glass scales and temperature compensation - Manual, integrated wedge crowning in the bed - "New Standard Clamping" manual, hardened, self-centring upper tool clamping system for vertical tool change - Lower tool clamping with hydraulic clamping, hardened - Programmable lower tool displacement (pneumatic, 2 positions) - 2-axis backgauge system with rack-and-pinion drive for X and R axes, 2 stop fingers, safely adjustable from the front - Machine control: TASC 6000 - Operator console with LCD keypad, emergency up, down and E-stop foot switch - Safety features: integrated side doors and automatic rear roller cover - Control cabinet cooling - Oil cooler - Modern machine design + 5-axis backgauge system + Hydraulic upper tool clamping + CNC crowning + BendGuard + 2 support consoles + Park position + 1 bending aid + Additional foot switch

Condition: good (used), functionality: fully functional, Year of construction: 2009, laser type: CO₂ laser, laser power: 3,200 W, X working area max.: 6500 mm Isdpey Sai Nefx Amiotg Laser power: 3200 watts Control: SINUMERIK 840D Standard equipment: - Robust machine frame with integrated laser unit - CO2 laser TLF 2000, high-frequency excited, with cooling unit - Drives: Maintenance-free three-phase servo motors - Hl-LAS high-pressure cutting - Fast processing with SprintLas - Programmable cutting gas pressure adjustment - Laser cutting head with 5" lens, DIAS III - Quick-change device for cutting head - Laser power control - Laser logbook function - Automatic shut-off - Work area lighting - Control system SINUMERIK 840D: Open PC-based control, easy operation, diagnostic functions, maintenance logbook, technology data, teleservice, 3.5" floppy disk drive, RJ45 network connection - Safety: Multi-beam light barriers, fully enclosed and ventilated beam guidance, compact extractor, protective cabin - PRS 3001 unloading station with brush table - Chuck set D 20-85 mm Special equipment: + Upgraded to Laser TruFlow 3200 + SeamLine Tube + LoadMaster Tube 6.5 m, rear + Focus Line

Condition: new, Year of construction: 2022, functionality: fully functional, table width: 3,200 mm, We are offering this new BORUI CNC 200 / 3200 hydraulic CNC press brake, year of manufacture 2022. Manufacturer: BORUI CNC Model: 200 / 3200 Isdpfxsy Sv Dpe Amietg Year of manufacture: 2022 Condition: new Type: hydraulic CNC press brake If you have any questions or need further information, please feel free to send us a message or give us a call.

Condition: excellent (used), Year of construction: 2011, Swivel bending machine Make: Schröder model: SPB EVO 3200//4.0 DU used Iedjlnixispfx Amistg year of construction: 2011 useful length 3240 mm max. sheet thickness 4,0 mm lowering bending beam 200mm stroke upper beam 650 mm bending center adjustment 80 mm max. speed 100/100 mm up/down max. bending speed 90 max. bending speed DU 150 mm max. bending angle 150 Ø min. bending inner radius 1,5 x t, mm motor power upper beam 2x4,24 kW dimension: Lx6332 mm x W 2380 mm weight 12260 kg.

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, power: 320 kW (435.08 HP), Stationary shredding plant LINDNER JUPITER 3200. Electric drive: 2x 160 kW Including hydraulic unit and control cabinet. Iodpfey H D Swjx Amietg

Condition: used, Year of construction: 1993, press force 100 t stroke - 170 mm working lenght 3200 mm dayligth 450 mm table dimensions 3220 x 800 mm Isdpfxevuk Rdj Amijtg speed down 50 mm/s speed up 150 mm/s working speed 7 mm/s oil volume 600 l power requirement 20,0 kW Weight 16,0 t dimensions (WxDxH) 3,7 x 2,5 x 2,6 m SPECIAL DEAL as is where is, WITHOUT additional work free loaded to truck year of manufacture 1975 - modernization 1993

Condition: used, Year of construction: 2013, operating hours: 8,682 h, power: 164 kW (222.98 HP), gearing type: other, maximum speed: 80 km/h, first registration: 04/2013, color: orange, overall weight: 14,000 kg, mileage: 159,883 km, empty load weight: 8,293 kg, maximum load weight: 5,707 kg, axle configuration: 4x4, suspension: steel, number of seats: 2, driver cabin: day cab, wheelbase: 3,000 mm, brakes: other, emission class: none, Equipment: ABS, additional headlights, air conditioning, all wheel drive, cabin, compressed air brake, differential lock, front linkage, front power take-off, front-end loader, onboard computer, power assisted steering, traction control, trailer coupling, * German vehicle – additional charge €11,500 for Mulag attachments * From first owner * Condition as per photos * Only 8,682 original operating hours * Front and rear PTO shafts * Municipal hydraulics at front and rear * Front mower * Mulag MRS300 boom * Mulag RMK1200 verge mower head * Rear mower * Mulag MHS800 rear boom * with Mulag MK1200 mower head * Municipal and rear hydraulics * Rear three-point linkage * Mulag MRS 300 verge mowing implement * Ideal for mowing in roadside areas, suitable for both left and right side operation * Front three-point hitch mounting * Reach up to 3.00 m * Powered via front PTO * Electro-hydraulic control * Mower head float * Ground speed-dependent sensing system * RMK 1200 verge mower head * Working width 1,200 mm * Telescopic MHS 800 rear boom mower * Lateral shift 1,600 mm * Left and right reach 8.70 m * Automatic terrain contour following * High-clearance portal for passing obstacles up to 3.90 m * Single-hand control unit with multifunction joystick * Quick-release system * Mulag MK 1200 flail mower head * Total width 1,580 mm * Boom utilization monitoring * Comfort cab with two seats * Air conditioning * Front window heating * Outside temperature display * Comfort driver’s suspension seat * Electrically heated mirrors * JCB PowerShift transmission with three powershift stages * Disc brakes * ABS * Differential lock * Warning beacons * Distant warning indicator * Work lights * 4x4 all-wheel drive * Tires: 495/70R24 Ijdjvhqbcjpfx Amiotg * Maximum speed: 80 km/h * LOF tractor (agricultural tractor) * Wheelbase: 3,000 mm * Gross vehicle weight: 12,000 kg * LOF registration When selling to commercial customers and for export (EU and non-EU), the German commercial code applies. If desired, we can provide a quote from our partner workshops for a new TüV inspection. Our offer is generally WITHOUT new TüV inspection, without new DGUV, without new SP, without new UVV. More trucks can be found on our homepage. We speak the following languages: German, English, Polish, Turkish Note: We offer and strongly recommend viewing and inspection of the goods to avoid any misconceptions regarding condition or suitability for the buyer. Viewings and inspections are possible at any time by prior appointment and are expressly encouraged. All information provided without guarantee. We assume no liability for errors or erroneous statements in the offer. The buyer is obliged to independently verify the condition and specifications of the goods/vehicles. Subject to change, prior sale, and errors.

Condition: used, Year of construction: 1998, operating hours: 99,161 h, clamping force: 32,000 kN, screw diameter: 130 mm, injection weight: 8,100 g, total length: 4,900 mm, total height: 4,200 mm, overall weight: 230,000 kg, # Sales Description A high-performance injection molding machine from the German manufacturer KraussMaffei is available for sale. Ijdpfxsyt H Dho Amijtg This is the KM 3200-19000 MC model, specifically designed for the production of large-sized plastic components and industrial series manufacturing. The machine offers very high clamping force and is particularly suitable for applications involving technical plastic parts or large-scale items. The machine features a clamping force of 32,000 kN, a screw diameter of 130 mm, and a maximum shot weight of 8,100 g. This allows for the efficient production of large parts with high material requirements. In addition, the system is equipped with extensive peripheral equipment, including a robot interface for KUKA KRC4, a S.I.S.E. IS’Tech sequential injection controller, GWK temperature control units, and a Motan Colormetric dosing and mixing system. A belt conveyor is also included in the package. Technical Data * Manufacturer: KraussMaffei * Model: KM 3200-19000 MC * Machine No.: IMM MC3F No.12 * Year of manufacture: 1998 * Operating hours: approx. 99,161 h Performance * Clamping force: 32,000 kN * Screw diameter: 130 mm * Max. shot weight: 8,100 g Dimensions and Weight * Machine weight: approx. 230,000 kg * Machine depth: approx. 4,900 mm * Machine height: approx. 4,200 mm The machine represents a robust and proven solution for industrial plastics processing and is especially suitable for manufacturers requiring large-format injection molding capacity. Further information, photos, or inspection appointments are available upon request.

Condition: used, Electric pedestrian stacker, pallet stacker JUNGHEINRICH model EJC 214 Serial No.: 90334640 Year of manufacture: 2009 Rated capacity: 1400 kg Rated lift height: 3200 mm Fork length: 1150 mm Overall length: 2000 mm Overall width: 810 mm Overall height: 2050 mm Operating voltage: 24 volt - Duplex mast with 1600 mm free lift - 4356 operating hours recorded - Battery from 2009, type 3PZS 375 (24V/375 Ah) - Automatic charger Jungheinrich 24V, 40 Amp Itsdpfx Amsvdmxvoijg - UVV inspection valid until 11/2025 - Surcharge for new UVV inspection = EUR 150 Weight: 1200 kg Good condition

Condition: used, mileage: 27,800 km, power: 120 kW (163.15 HP), gearing type: automatic, color: silver, number of seats: 9, Year of construction: 2024, Equipment: ABS, air conditioning, central locking, power assisted steering, - So that you can receive the best possible advice from us, we kindly ask you to arrange an appointment. Mr. Kiel will be happy to assist you. Tel: B25 Electric parking brake, BA3 Active Brake Assist, BH1 HOLD function, C6L multifunction steering wheel, CF7 comfort suspension, CL1 steering wheel adjustable for tilt and height, CM2 bumper and attachments painted in body color, CU4 aerodynamics package, E07 hill start assist, E1D DIGITAL RADIO (DAB), E1E navigation, E7M MBUX multimedia system, ED4 fleece battery 12 V 92 Ah, EL9 2-way speakers front and rear, F2W winter package, F3Z comfort locking system, F48 heated windscreen washer system, F61 interior mirror, F66 lockable glove compartment, F68 heated and electrically adjustable exterior mirrors, FKB ESTATE CAR, FS5 illuminated vanity mirrors for sun visors, G43 9G-TRONIC, H00 warm air duct to passenger compartment, H15 passenger seat heating, H16 driver seat heating, H20 all-round heat-insulating glass, HH9 semi-automatic climate control TEMPMATIC, HZ0 electric auxiliary heater, HZ7 semi-automatic rear climate control TEMPMATIC, J55 seat belt warning device for passenger seat, JA7 blind spot assist, JA9 traffic sign assist, JB4 active lane keeping assist, JB7 parking package with reversing camera, JH3 communication module (LTE) for digital services, JK5 instrument cluster with color display, JW8 ATTENTION ASSIST, JX2 maintenance interval 40,000 km, K51 misfuel prevention, KB5 main tank 70 liters, L LEFT-HAND DRIVE, LA2 headlight assist, LB9 exit lights, LC4 comfort roof control panel, LC6 lighting in rear grab handle with reading spot, LC7 front footwell lighting, LC8 tailgate surround lighting, LE1 adaptive brake light, LE6 rear cabin night lighting, LP2 interior and surround lighting estate, MJ8 ECO start-stop function, MO5 EMISSIONS CLASS EURO 6e RDE5 M/N1 GR. II, MS1 CRUISE CONTROL, MU4 OM 654 DE 20 LA 120 kW (163 HP) 3800 rpm, MX0 BlueEFFICIENCY package, S23 front passenger two-seater, SA1 seat cushion depth adjustment driver, SA6 front passenger airbag, SB1 comfort driver seat, SE5 driver's seat lumbar support, SH1 thorax-pelvis sidebag driver, SH2 thorax-pelvis sidebag passenger, SH9 windowbags for driver and passenger, SK2 seat occupancy sensor driver’s seat, SK6 passive child detection in vehicle, T14 active stop for sliding door, T19 left sliding door, T70 child lock for passenger doors, T74 entry grab handle, U3R seat rails with quick-release locking, 3 rails, U73 armrests for passenger seating, US4 3-seat comfort bench 1st row, outer seat foldable, US5 3-seat comfort bench 2nd row, outer seat foldable, V23 premium interior trim, V36 roof trim, V41 TPO plastic floor in the passenger compartment, VF4 Caluma black fabric, VH1 rear grab handle, VV9 mounting points in roof frame, W16 fixed window front left in side wall/sliding door, W17 fixed window front right in side wall/sliding door, W29 fixed rear window, W65 tailgate, W70 privacy glazing in rear, dark glass, W78 tailgate window with wiper and washer system Itsdeygqrpspfx Amisg We are happy to provide you with an offer for trading in your used vehicle. Should you wish to lease or finance your vehicle, we will gladly provide you with an individual offer. Subject to errors and prior sale. Mr. Kiel will be happy to assist you. IMPORTANT: Viewing only by prior arrangement! All information without guarantee. Errors and prior sale excepted! Pictures...

Condition: ready for operation (used), Year of construction: 1991, Used strip cutting line consisting of: Alphamatic vacuum feeding system with 4 roller conveyors Feeder to the crosscut saw Crosscut saw with vacuum workpiece clamping Conveyor to the rip saw Rip saw Manufacturer: Holzma Model: HPP81-3200 Year of manufacture: 1991 Discharge conveyor Longitudinal roller conveyor with length measurement REA JET automatic labeling system Shredder Brand: Schuko Type: 6M900K Year of manufacture: 2017 Technical specifications - 18.5 kW Belt conveyor system Brand: Kraft Itjdpfx Asy Drgwsmijg Year of manufacture: 2018 Technical specifications - Consists of 13 individual belt conveyors - Conveyor length: 3000 mm each - Belt width: approx. 580 mm - 3 of the 13 conveyors are swing-out Scissor lift table Year of manufacture: 2005 Technical specifications - Load capacity: approx. 1000 kg Edge processing machine Brand: Hebrock Type: AKV2001F Year of manufacture: 2000 Technical specifications - With scrapers and brush unit on a chassis Tilting skip Brand: Bauer Type: WU-R 750 Year of manufacture: 1991 Used strip cutting lineconsisting of:Alphamatic vacuum feeding system with 4 roller conveyorsFeeder to the crosscut sawCrosscut saw with vacuum workpiece clampingConveyor to the rip sawRip sawManufacturer: HolzmaModel: HPP81-3200Year of manufacture: 1991Discharge conveyorLongitudinal roller conveyor with length measurementREA JET automatic labeling systemShredderBrand: SchukoType: 6M900KYear of manufacture: 2017Technical specifications- 18.5 kWBelt conveyor systemBrand: KraftYear of manufacture: 2018Technical specifications- Consists of 13 individual belt conveyors- Conveyor length: 3000 mm each- Belt width: approx. 580 mm- 3 of the 13 conveyors are swing-outScissor lift tableYear of manufacture: 2005Technical specifications- Load capacity: approx. 1000 kgEdge processing machineBrand: HebrockType: AKV2001FYear of manufacture: 2000Technical specifications- With scrapers and brush unit on a chassisTilting skipBrand: BauerType: WU-R 750Year of manufacture: 1991Note:The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.

Condition: used, Year of construction: 2013, operating hours: 33,000 h, clamping force: 320 kN, displacement volume: 678 cm³, injection pressure: 2,000 bar, overall weight: 15,000 kg, screw conveyor diameter: 60 mm, terms of delivery: EXW (ex Works) Isdpfx Asy Hxr Semistg delivery time: on request terms of payment: 100% prior to delivery

Condition: new, Catalogue number H0548 Iedpjy Rrzhefx Amiotg - New machine, in stock - CE certificate - Cutting length: 3200 mm - Cutting width: 1150 mm - Cutting height 90°/45°: 80/55 mm - Max. blade diameter: 305 mm - Blade adjustable up/down and at 45° angle - Scoring blade diameter: 120 x 20 mm - Main saw speed: 4500, 5500 rpm - Scoring saw speed: 8000 rpm - Motor: 5.5 kW / 400 V - Scoring motor: 1.1 kW - Carriage guided on steel rods Overall dimensions: - Length: 3220 mm - Width: 3150 mm - Height: 900 mm - Weight: 700 kg - Mechanical height adjustment - Mechanical tilt adjustment - Table extension - Table widening - Angle cutting fence - Includes main blade and scoring blade Net price: 20,320 PLN Net price: 4,990 EUR Net price calculated at exchange rate 4.1 PLN/EUR (In case of significant exchange rate fluctuations, the price may change)