Machining center

Homag BMG311 Venture 316XXL

Condition: used, machine/vehicle number: 008438, Max. panel width: 4500 mm Fpedpfx Anjyngy Sodoi Max. panel length: 4500 mm Main saw blade projection: 50 mm No of Grippers: 8

Condition: used, Year of construction: 2023, Used system Year of manufacture: 2023 Condition: As new, system has only a few operating hours Equipment and technical specifications: - Stationary clean air filter system ECO JET DUO 6 XL ZRS 2 x 7.5 kW - For extraction of wood dust and wood chips - Fan: 2 x 7.5 kW - Airflow rate: 10,000 m³/h at - Negative pressure: 2,700 Pa (total) / 2,200 Pa (static) - Filters: 80 pcs à 2.50 m - BIA category M, electrically conductive - Filter area: 77.6 m² - Filter surface load: 129 m³/(m²x h) - Filter cleaning: AL-KO OPTI JET® - Pressure relief panels: 0.84 m² (bursting discs) - Lower section with discharge chute and rotary valve Dry discharge with C-coupling Comprising: - ECO JET DUO 6 UPPER PART, 2 x 7.5 kW: Clean air filter system; 2 x 7.5 kW fan; AL-KO OPTI-JET filter cleaning; Incl. pressure relief panels and dry discharge with C-coupling; without filters and control; Incl. pressure sensors - ECO JET DUO 6 ZWR XL - 1100 MM: Intermediate ring for expansion or unit height increase with 2 inlet connections for suction nozzles - Base frame with discharge chute and integrated rotary valve 960/1 FG: For disposal of chips via on-site transport fan into existing silo or similar Transport pipe DN 200 mm, approx. 1,260 mm long under rotary valve, connection to transport pipe to be provided by buyer Rotary valve certified according to ATEX Directive 94/9/EC Technical data ZRS 960/1FG: CE 0588 Ex II 1D/- (Unit for indoor/outdoor); EX D (protection system); FSA 11 ATEX 1614X Motor output: 0.18 kW / 0.78 A 3 Ph / 400 V / 50 Hz Protection class / mounting: IP 54 / B3 Insulation class: F Speed: 41 rpm Discharge capacity*: 15,744 l/h* Number of cells: 7 pcs Inlet/outlet cross-section: 960 x 250 mm / 960 x 208 mm Dimensions (W x D x H): 1,100 x 605 x 330 mm Temperature range: up to 50°C *depending on material - FILTER & SUPPORT CAGE 2.5 / CAT M EL WHITE FILTER ECO JET DUO 6: 80 pcs required Filter BIA category 'M' – electrically conductive; 2.50 m long, incl. support cages; 77.6 m² filter area - Inlet nozzle 400 mm: with backdraft damper in rectangular duct - ECO JET backdraft damper 910x346x500 - Control cabinet – AL-KO Control System: BASIC CONTROL ACS II WITH TOUCHSCREEN DISPLAY: Basic unit for cascade control of 2 fans via frequency inverter (FU) up to max. 37 kW; corresponding performance module and controls as well as the frequency inverter are included in the basic unit; the FU is installed in the control cabinet Fedoyk I U Aepfx Andjpi Cascade control with FU handover: Fan 1 operates on the frequency inverter; when threshold is reached, switches to mains operation; Fan 2 takes over FU and regulates as needed; Basic functions: Control voltage 24 V Touchscreen display, ST 1200 control, Sitop Power supply, collective fault warning Display of fault message as plain text on display and collective fault indicator on the door Manual discharge start via display button Start filter cleaning via differential pressure Manual filter cleaning start via button Post-cleaning Fire monitoring

Condition: used, Year of construction: 2008, without briquetting press Filter area 32 m² with funnel transition to container or connection to rotary valve used, top condition, little used Brand Schuko Type Vacomat 300 Year of manufacture 2008 Clean air device / negative pressure GS dust-tested BIA-tested CE type-tested Fpedpfx Anjvxlqmedei Motor 7.5 kW Connection diameter 300 mm Pressure pa. 3090 Air output 5800 m³/h Control Filter pressure monitor Extinguishing device powder extinguisher New price approx. 17,000.00 EUR Space requirement approx. 3600 x 1590 x 2550 mm / 4400 without funnel Storage location 97447 Gerolzhofen, free loading, unpacked Handed over in the current condition as viewed, without guarantee and warranty

Condition: new, Ruchser Glass bead nailer "2 P Jumbo automatic E.C." - new - Your advantages: - The corner connections are closed - No open glazing bead joints - There are no color differences when painting - The glazing bead frames are easy to assign Clamp corner joining machine 2P Jumbo Automatic E.C. for clamping glazing bead frames. Choice between automatic and manual operation; With angle system, clamping device from above and front Pressure can be regulated separately. Inserting parallel and superimposed ones Clamps possible via electronic programming control. Stapler can be mounted on a suitable work table, Operation via foot valve. ----- Price in this version on request! Plus packaging/shipping ----- Pictures show Clamp corner joining machine 2P inlcuding the option of movable work table (please find details as follows under additional prices) Additional prices: ----- Movable work table height adjustable from 700 - 1000 mm, 2 pieces of support bars can be plugged in 1000 mm long, 2 pieces swiveling and sliding Support bars 1000 mm, support bars covered with felt, Fpodpfx Aevnh T Nendei 4 swivel castors, 2 of which have a stop device. ----- Additional price: 1.311,00 euros net Brackets: packages 15 mm brackets (package of 2000): Price 22.00 euros 12 mm brackets (package of 3000 pieces): Price 32.00 euros 10 mm staples (package of 3000 pieces): Price 32.00 euros Dimensions and weights ----- Jumbo Automatic E.C 470 x 370 x 300 mm, 35 kg Work table 32 kg All prices net. plus statutory VAT Ex works plus packaging and shipping (technical data according to manufacturer - no guarantee!)

Condition: used, machine/vehicle number: 007875, Max. panel width: 3800 mm Max. panel length: 2200 mm Main saw blade projection: 130 mm Fjdpfewkf Axex Andspi No of Grippers: 7

Condition: used, Year of construction: 1991, Used machine Year of manufacture: 1991 Fedpey R Ha Ssfx Andjpi Equipment and technical data: - Complete drying system with trolley, high-performance radial fan, electric heater, - Air inlet and outlet flaps, safety thermostat, spray device - Lifting swivel door for convenient opening and closing of the dryer - Interior lining: all side walls are made of seawater-resistant special aluminum - The stainless steel floors are permanently resistant to aggressive wood preservatives such as tannic acid, etc. - The sealing of the connecting joints is absolutely resistant and also allows steaming in the system - Stacking dimensions: 530 x 105 x 115 cm - Stacking volume: 6.4 m³ - External dimensions: approx. 690 x 140 x 200 cm - Heater: 12 kW - Motor: 1.1 kW / 400 V - with MP 902 control system Availability: short notice Location: 63934 Röllbach

Condition: excellent (used), Year of construction: 2013, operating hours: 3,000 h, 5-axis CNC portal machine; Console table with 6 movable consoles, each with 2 suction cups, side and longitudinal stops, LED position display for vacuum suction cups Venture 316 Future Package 10 extraction rails, Power-Clamp connection, vacuum connection for templates WORKPIECE PARAMETERS: – Maximum workpiece length: All units, single operation: 3300 mm; pendulum operation: max. 1740 mm Tool diameter 25 mm: single operation: 3475 mm; pendulum operation: max. 1915 mm – Workpiece width: Front stop: 950 mm all units / 1050 mm with tool diameter 25 mm Rear stop: up to 1400 mm / 1550 mm Fodpsy E Npfjfx Andepi – Workpiece thickness: – Max. 250 mm including clamping devices – Up to max. 60 mm with standard clamps SAFETY AND PROTECTIVE EQUIPMENT: EC-compliant; Safety enclosure on the right with door Left and rear: wall installation! Equipment: 10 kW Drive5C spindle and 14-position tool changer (carousel) + 9-position linear changer (side mounted) Drilling head with 16 spindles (V12/H4/S0/90°) DRIVE5C+ interface for aggregates Tool length measuring probe Software for position measurement and CNC coordinate rotation Tool transfer station Coolant tank for processing spindle Vacuum pump 300/360 m3/h Powerclamp pneumatic package Control system: POWERCONTROL PC85 with POWERTOUCH system; IPC POWERPACK Operator terminal for program start; camera system with tablet PC WOODWOP CAD/CAM standard interface Documentation and control texts: German Delivery includes only the tools and HSK tool holders shown in the images!

Year of construction: 2025, condition: like new (used), functionality: fully functional, 2025 BCAMCNC 5 Axis CNC Router – Like New, Never Used For sale is a 2025 BCAMCNC 5 Axis CNC Router, installed but never put into production. This machine is in as-new condition, making it an excellent opportunity to purchase a state-of-the-art 5 axis router without the lead times or cost of a brand-new unit. The BCAMCNC 5 Axis Router is designed for high-precision machining of complex parts, ideal for industries such as aerospace, automotive, furniture, marine, signage, mould making, and advanced composites. ✅ Key Features & Benefits 5 Axis CNC machining – full simultaneous interpolation for complex 3D parts Like new – installed but never used Heavy-duty welded frame for stability and long-term accuracy High-speed spindle for efficient cutting across a wide range of materials Automatic tool changer (ATC) for maximum productivity User-friendly CNC control with advanced software integration Vacuum table for secure workpiece holding Perfect for wood, plastics, composites, foams, aluminium and non-ferrous metals 📐 Technical Specifications (2025 BCAMCNC 5 Axis CNC Router) Table Size: 3000 × 1500 mm X-Axis Travel: 3000 mm Y-Axis Travel: 1500 mm Z-Axis Travel: 1200 mm A-Axis Rotation: ±120° C-Axis Rotation: ±360° continuous Spindle: 9kW High-frequency HSD (18,000 RPM) Tool Changer: 8 position automatic tool changer (ATC) Drive System: Servo motors with helical rack & pinion on X/Y, ball screw on Z Table: Vacuum table with powerful 7.5kW pump, multi-zone clamping Control System: Syntec 610MA-ES industrial CNC controller Max Cutting Speed: Up to 25 m/min Repeat Accuracy: ±0.05 mm Power Supply: 380V / 50Hz 📦 Included with Machine Full extraction-ready setup Includes tooling package Documentation & manuals 🌍 Condition Installed but never used – machine is like new 2025 model – latest generation technology Available immediately – no waiting times Fjdjxddk Sjpfx Andopi 🔑 Summary This is a rare chance to purchase a 2025 BCAMCNC 5 Axis CNC Router in unused condition. With full 5 axis capability, a heavy-duty structure, and precision control, it is the perfect solution for companies requiring high accuracy and productivity in machining complex 3D parts. Notes: *Specifications are given in good faith but not guaranteed*

Year of construction: 2026, condition: new, The AL-KO Sanding table AST 1.5 BASIC is the entry-level model for the AL-KO sanding table program. It is certified according to GS-HO-11 and bears the seal "Wood dust tested according to BGI 739-1". It is therefore suitable for manual grinding as well as for machining workpieces with manual work machines. Fpjdpfx Anofyadbedji The grinding table is made of galvanized steel sheet. The workpiece support consists of a removable beech wood grate. It is accessible from all 4 sides. So that several people can work at the same time. Thanks to the sturdy, structurally stiffened construction, workpieces with a weight of up to 150 kg can be processed. In order to adjust the work surface of the AL-KO AST 1.5 BASIC to the required working height, it is equipped as standard with a mechanical height adjustment. The height adjustment is done without any tools by adjusting the feet in scaled grid dimensions. In addition, all feet can be adjusted in millimeters according to the respective ground conditions. The extraction trough is optimized in terms of flow technology. Due to the funnel-shaped design of the trough with integrated air duct, the air stream is directed to the intake socket. Depending on the extraction capacity required, the connection to the customer-specific extraction system can be made via a connection piece Ø 140 or Ø 160 mm. The bending of the machining surface on both two longitudinal sides also allows machining of workpieces on the end face The suction grilles are aligned with the flow connection to the suction port and thus guarantee an optimal extraction result. For cleaning work inside the sanding table, the slat grating can be lifted off and the air duct can be removed by loosening a few screws. The sanding table is delivered pre-assembled, only the feet have to be mounted and adjusted to the required working height. Tender specification AST 1.5 BASIC page 2 from 2 Technical data AST 1.5 BASIC: - Intake socket 140/ 160 mm - Required suction performance 1.500 m³/h - Vacuum on socket at 22 m/s 1.000 Pa bei Ø 140 mm 700 Pa bei Ø 160 mm - Working height adjustable 735 – 1.015 mm - Working surface (W x L) 946 x 1.500 mm - Dimension (W x L) 1.000 x 1.600 mm - Weight approx. 73 kg

Year of construction: 2024, condition: new, Trolley for carriage and storage of profiles in vertical position COMALL CARR 300 Q, new Technical specifications: - 10 compartments with working size 128 mm - Contact surfaces coated with non-scratch and shock-proof plastic material Fsdpef Nk H Hjfx Andjpi - 4 wheels Ø 125 mm, 2 of them with locking device - Arms adjustable in 5 different positions - Rubber-coated supporting table - Loading: 650 Kg