Used Various Accessories for sale (28,457)

Year of construction: 2017, operating hours: 800 h, condition: like new (used), functionality: fully functional, working width: 250 mm, For sale is a very compact and flexible dual-wave soldering system, type ATF 13/25, from the German quality manufacturer ATF. Without solder pot filling. Automation Technology GmbH (Collenberg). Very compact soldering system, can be operated in an office environment. The system does not require a compressed air connection or explosion protection. Ideal for small series production. Footprint without infeed and outfeed: 1600x850 mm Year of manufacture: 2017 Connection value: 400V/25A 14 kW Weight: 190 kg (without solder) Process width: 250 mm, maximum PCB size: 470 x 250 mm. With extended infeed and outfeed (770 mm each) Dsdpfx Aszku Rcjbtowb Accessories: 4 pcs soldering frames, extended with center supports 1 set of various hand tools (hydrometer, spoon, spatula, etc.) The system was only operated sporadically, approximately 6 times per year for half a day. Therefore, it is in like-new condition. Since the system was used with only one soldering wave, the second solder pump is still unused and included in its original delivery condition. Self-dismantling and pickup only! No shipping possible. Price negotiable.

Condition: good (used), functionality: fully functional, machine/vehicle number: D30423, operating hours: 3,136 h, total length: 864 mm, total height: 1,626 mm, total width: 711 mm, type of input current: AC, overall weight: 227 kg, input voltage: 240 V, input current: 7 A, input frequency: 50 Hz, feed length X-axis: 355 mm, feed length Y-axis: 355 mm, feed length Z-axis: 254 mm, The machine is being sold due to a restructuring of our machine park and is immediately ready for use. The scope of delivery also includes various residual materials, so the printer can be used immediately after commissioning. We will gladly provide further information about the accessories and included materials upon request. Djdszh Nayopfx Abtowb

Condition: new, *IMMEDIATELY AVAILABLE* Equipment: -Welded frame -Modular accessory system -Ramp edge Net price: €8,596.64 / Gross price: €10,230.00 Article number: BC2335552200.01 Technical data: • Brand: Brian James • Model: Connect 476 • Vehicle type: Flatbed trailer • Vehicle condition: New vehicle • Initial registration: No initial registration • TÜV/MOT: 2 years from initial registration • Internal dimensions (L x W x H): 550 x 227 x 0 cm • External dimensions (L x W x H): 717 x 229 x 80 cm • Loading height of the floor: 65 cm • Permissible total weight: 3,500 kg • Unladen weight: 935 kg • Payload: 2,565 kg • Chassis: Flatbed trailer (wheels under the body) • Tires: 195/60R12C • Suspension: ALKO rubber spring axle • Support wheel: Yes • 100 km/h approval: Optional, can be retrofitted DESCRIPTION • The most adaptable multi-functional trailer for commercial goods and vehicle transport of all kinds. • Every available option can be flexibly added or removed, enabling a needs-based adaptation for almost any application. • Perforated steel lashing floor in combination with an 18 mm multiplex floor offers high slip resistance and is extremely durable, even under the harshest operating conditions. • Insertion option at all 4 corners for side panels, tarpaulin frames, side panel extensions, or front wall extension. • Vehicle designed for all options even after purchase: enormous potential for retrofitting: Hydraulic tilting functions, winches, ramps, etc. can be retrofitted at any time. • Very stable steel frame, welded. • Ramp edge for access ramps, adjustable for different track widths. • Numerous lashing points stamped directly into the frame enable professional load securing. • Integrated ramp recesses for easy retrofitting of access ramps. • Side panel color: black • Frame completely hot-dip galvanized. • Sturdy net hooks under the loading area. • Spare wheel easily accessible, mounted on the drawbar. • Reversing aid. • ALKO overrun device and parking brake. • Steel casting tow hitch with integrated high-security ALKO lock. • Very stable V-drawbar, REINFORCED. • 13-pole plug. • Reversing light. • Large-sized LED safety lighting. • Complete LED lighting: Extremely bright, durable, and reliable. • Dynamic LED turn signals are clearly visible even in bad weather. • Robust protection for the rear lights. • Integrated rear fog light. • Various marker lights at the front, side, and rear. • Heavy-duty support wheel. • 5-year chassis warranty. _____ Accessories can be retrofitted by our specialist workshop! - Feel free to request any specific requirements! _____ - Financing or leasing possible. - Nationwide delivery possible. - All prices include VAT. - Vehicle registration document can be sent in advance or transfer plates (Germany) can be provided. - Export registration plates including customs registration possible. Descriptions and images are subject to copyright!! Anhänger Zentrum BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Dsdpfjzy Al Tox Abtowb Over 1,200 trailers immediately available for you! We have been Brian James / Blyss / Debon / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Lorries / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialist dealer & repair - workshop for over 30 years. - Errors, omissions, and prior sale are subject to change -

Condition: ready for operation (used), Year of construction: 2017, operating hours: 9,000 h, travel distance X-axis: 300 mm, number of axes: 3, Metal 3D printer manufactured in 2017. This TRUMPF TruPrint 3000 features a build volume of Ø 300 mm x 400 mm and is equipped with a 500 W fiber laser. It offers high-speed and high-density build rates, making it suitable for various applications. If you are looking to get high-quality metal printing capabilities, consider the TRUMPF TruPrint 3000 machine we have for sale. Contact us for further details regarding this machine. • Build volume: Ø 300 mm x 400 mm • Laser configuration: 1x 500 W fiber laser • Laser capacity: 500 W • Main supply: 360 – 440 V Dwjdpfezu S Dbex Abtsb • Frequency: 50/60 Hz • Control voltage: 24 VDC • Connected load: 15 kVA • Full load current: 32 A • Nitrogen supply (N2): 6 – 10 bar • Argon supply (Ar): 6 – 10 bar • Air pressure: 5 – 10 bar • Laser operating hours: approx. 9,000 h • Last maintenance: 02/2024 • Condition: very good • Build material: AlSi10Mg only • Validated parameter sets: High Speed / High Density • High Speed build rate: 57 cm³/h at 60 µm layer thickness and 99.6% density • High Density build rate: 27 cm³/h at 60 µm layer thickness and 99.9% density • Optional accessories: • unpacking station • cooler • pallet jack • 11 build plates • 2 new filters • Optional accessories year: 2017 • Optional accessories condition: very good Availability: approx. Q3/2026

Condition: good (used), Year of construction: 1978, functionality: fully functional, For sale is a robust Hofmann table milling machine, built in 1978, in a heavy-duty industrial design. The machine is equipped with a Holz-Her 3-roller feed unit ETZ and is suitable for a variety of milling operations in carpentry workshops, joineries, and in the furniture and interior design industries. The height adjustment of the milling spindle is conveniently done via a handwheel. The milling jaws can be adjusted manually. Three different spindle speeds allow for adaptation to various milling operations. In addition, the machine is equipped with 3 Aigner rails. Technical data Manufacturer: Hofmann Year of construction: 1978 Milling spindle diameter: 30 mm Spindle speeds: 6,000 / 8,000 / 10,000 rpm Height adjustment: by means of a handwheel Milling jaw adjustment: manual Dust extraction connections: Ø 120 / 140 mm Machine size: approx. 2,700 x 1,100 mm Heavy-duty table and machine construction made of cast iron Equipment Holz-Her 3-roller feed unit ETZ 3 feed rollers Height-adjustable feed unit Manual milling fence 3 Aigner rails Milling spindle Ø 30 mm 3 spindle speeds Handwheel for height adjustment Dust extraction connections Accessories as shown in the photos Scope of supply Hofmann table milling machine Holz-Her 3-roller feed unit ETZ 3 Aigner rails Accessories as shown in the photos Dwjdjzvdk Aepfx Abtob The machine can be inspected and tested under power by appointment. Transport possible for an extra charge! The machine is subject to differential taxation according to § 25a UStG. The machine will be inspected before sale. For used machines with a year of construction of 2009 or earlier, the warranty is excluded when sold to commercial customers. Technical data and equipment may vary. Errors, prior sale and changes are subject to change. All information without guarantee.

Condition: new, *IMMEDIATELY AVAILABLE* Includes: Ramps Equipment: -Welded frame -Modular accessory system -Ramps for driving on Net: €9,180.67 / Gross: €10,925.00 Article number: BC2335552200.21 Technical data: • Brand: Brian James • Model: Connect 476 • Vehicle type: Flatbed trailer • Vehicle condition: New • First registration: No first registration • TÜV/HU (technical inspection): 2 years from first registration • Internal dimensions (LxWxH): 550 x 227 x 0 cm • External dimensions (LxWxH): 717 x 229 x 80 cm • Loading height of the floor: 65 cm • Permissible total weight: 3,500 kg • Unladen weight: 964 kg • Payload: 2,536 kg • Chassis: Flatbed trailer (wheels under the body) • Tires: 195/60R12C • Suspension: ALKO rubber spring axle • Support wheel: Yes • 100 km/h approval: Optional, can be retrofitted DESCRIPTION • Most adaptable multi-functional trailer for commercial goods and vehicle transport of all kinds. • Every available option can be flexibly added or removed, allowing need-based adaptation for almost any application. • Perforated steel floor in combination with an 18mm multiplex floor offers high slip resistance and is extremely wear-resistant, even under the harshest operating conditions. • Attachment option at all 4 corners for side boards, tarpaulin frames, side board extensions or front wall extensions. • Vehicle designed for all options even after purchase: enormous potential for retrofitting: hydraulic tilting functions, winches, ramps, etc. can be retrofitted at any time. • Very stable steel frame, welded. • Ramping edge for drive-on ramps can be adjusted for different track widths. • Numerous lashing points stamped directly into the frame enable professional load securing. • Integrated ramp recesses. • High-quality perforated steel ramps, galvanized, L = 2.35m, pair. • Side panels color: black • Frame completely hot-dip galvanized. • Sturdy net hooks under the loading area. • Spare wheel easily accessible, mounted on the drawbar. • Reversing automatic. • ALKO overrunning device and parking brake. • Steel casting coupling head with integrated high-security lock ALKO. • Very stable V-drawbar, REINFORCED. • 13-pole plug. Dodpfx Abszy Dqqjtjwb • Reversing light. • Large-sized LED safety lighting. • Complete LED lighting: Extremely bright, durable and reliable. • Dynamic LED turn signals are also clearly visible in bad weather. • Robust protection of the rear lights. • Integrated rear fog light. • Various marker lights front, side and rear. • Heavy-duty support wheel. • 5-year chassis warranty. _____ Accessories can be retrofitted by our specialist workshop! - Please feel free to request any special requirements! _____ - Financing or leasing possible. - Delivery throughout Germany possible. - All prices include VAT. - Vehicle registration document can be sent in advance or transfer plates (Germany) can be provided. - Export license plates incl. customs registration possible. Descriptions and images are protected by copyright!! Anhänger Zentrum BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 1,200 trailers immediately available for you! We have been Brian James / Blyss / Debon / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Lorries / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialist dealer & repair - workshop for over 30 years. - Subject to errors, omissions and prior sale -

Condition: good (used), Year of construction: 1995, Deckel SOE tool grinding machine, manufactured in 1995. Accessories: collets, various grinding wheels. In good, operational condition. Dwsdpozx Rwuofx Abtob

Condition: new, *IMMEDIATELY AVAILABLE* Includes: Tilting, Ramps Features: - Ramps for driving on - Accessory kit - Welded frame Net price: €9,831.93 / Gross price: €11,700.00 Article number: BC2335552201.21 Technical data: • Brand: Brian James • Model: Connect 476 • Vehicle type: Flatbed trailer • Vehicle condition: New • First registration: No first registration • TÜV/MOT: 2 years from first registration • Internal dimensions (L x W x H): 550 x 227 x 0 cm • External dimensions (L x W x H): 717 x 229 x 80 cm • Loading height of the floor: 65 cm • Permissible total weight: 3,500 kg • Tare weight: 979 kg • Payload: 2,521 kg • Chassis: Flatbed (wheels under the platform) • Tires: 195/60R12C • Suspension: ALKO rubber spring axle • Support wheel: Yes • 100 km/h approval: Optional, can be retrofitted DESCRIPTION • The most versatile multi-functional trailer for commercial goods and vehicle transport of all kinds. • Each available option can be flexibly attached or removed, allowing for adaptation to suit almost any application. • Perforated steel floor in combination with an 18 mm multiplex floor provides high slip resistance and is extremely wear-resistant, even under the harshest conditions. • Insertion option at all 4 corners for sideboards, tarpaulin frames, sideboard extensions or front wall extensions • Vehicle also designed for all options after purchase: enormous potential for retrofitting • Very stable steel frame, welded • Loading edge for ramps is adjustable for different track widths • Numerous lashing points stamped directly into the frame enable professional load securing • Integrated ramp compartments • High-quality perforated steel ramps, galvanized, L = 2.35 m, per pair • Tilting loading platform with manual hydraulic hand pump • Side panels, color: black • Complete frame, hot-dip galvanized • Stable net hooks under the loading platform • Spare wheel easily accessible, mounted on the drawbar Dsdpfx Abezy Dctetewb • Reverse assist system • ALKO overrun device and parking brake • Steel casting coupling head with integrated high-security lock ALKO • Very stable V-drawbar, REINFORCED • 13-pin plug • Rear lights • Large-format LED safety lighting • Complete LED lighting: Extremely bright, durable and reliable. • Dynamic LED turn signals are easily visible even in bad weather • Robust protection of the rear lights • Integrated fog light • Various marker lights front, side and rear • Heavy-duty support wheel • 5-year chassis warranty _____ Accessories can be retrofitted by our specialist workshop! - Please feel free to request any desired options! _____ - Financing or leasing possible - Nationwide delivery possible - All prices include VAT - Vehicle registration document can be sent in advance or transfer license plates (Germany) can be provided. - Export license plates including customs declaration possible Descriptions and images are subject to copyright!! Anhänger Zentrum BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 1,200 trailers immediately available for you! We have been Brian James / Blyss / Debon / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Lorries / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - a specialist dealer & repair - workshop for over 30 years - Errors, omissions and prior sale excepted -

Condition: like new (used), Year of construction: 2025, operating hours: 4 h, functionality: fully functional, machine/vehicle number: Digitest II, DIGI TEST II Modular hardness testing system for fully automatic hardness tests according to Shore, VLRH, and IRHD on composite materials, soft-elastic materials, elastomers, plastics, and foams with variable testing geometries. Standards • ASTM D2240 • ASTM D1415 • DIN EN ISO 868 • DIN ISO 48-2 • DIN ISO 48-3 • DIN ISO 48-4 • NFT 46-003 • TD 00002001 • TD 00002002 • Measurement method • Shore A • Shore A0 • Shore D • Shore 0 • Shore 00 • Shore 000 • Shore 000S • Shore E • Shore B • Shore C • Shore D0 • Micro Shore A • Micro Shore D • Shore AM • Shore M • IRHD L • IRHD N • IRHD M • IRHD H • VLRH Dwodpozn I N Hefx Abteb Application areas Flat, inclined, convex, and concave geometries of composite materials, soft-elastic materials, elastomers, plastics, and foams. The digi test II enables precise and user-independent hardness measurements on elastomers, polymers, soft-elastic materials, composite materials, and foams. The modularly expandable measuring system is used in research and development as well as in production and quality control to determine the material hardness of a wide range of products and to ensure quality standards. Modularly expandable Interchangeable measuring devices allow for easy switching between the numerous measurement methods in the areas of Shore, IRHD, and VLRH without tools and with just a few steps. Thanks to the wide range of positioning and measuring devices offered, the digi test II is the right choice for laboratories, production, quality assurance, and development when testing a wide range of products. Many shapes – one solution Thanks to its modular expandability, the digi test II enables the measurement of all sample geometries. Whether you want to perform measurements on flat, inclined, concave, or convex geometries, you will obtain exact measurement values from a sample thickness of 0.7 mm thanks to the approach system. ROTOFIX FOR DIGI-TEST II Positioning device available as an accessory for the automatic measurement of a different number of samples and measurement positions. Secure measurement values without user influence In addition to perfect alignment as a table unit, the Digi-Test II ensures the optimal measurement position of the test samples through its numerous positioning devices. The most accurate measurements without user influence and manual pre-setting are guaranteed, which saves you time for the important things. Comprehensive analysis through various measurement methods Do not only measure the hardness of your test piece, but also the flow curve of the material during the test. With the option for hysteresis measurements, the Digi-Test II provides additional insights into the characteristic properties of the material. CENTROFIX Manually operated positioning device available as an accessory for measuring individual test specimens for the digi test II and the Gelomat. Modular attachments for the Centrofix can be used to clamp and fix samples and molded parts of any kind for measurement.

Year of construction: 2017, condition: used, This listing is for a Agilent Eclipse Fluorescence Spectrometer. The unit is in full working condition and is ready for immediate release. Supplied with cables, software disk, License key,spare diffuser and Neutral density attenuator. The Agilent Cary Eclipse fluorescence spectrometer is sensitive, accurate, and flexible. Ideal for use as a routine fluorometer, the Cary Eclipse can easily be switched between fluorescence, phosphorescence, chemiluminescence, and bioluminescence measurements. Additional flexibility can be achieved through various accessories, including temperature control and solid sample handling, automatic polarizers, and a microplate reader for high sample throughput. Type:Benchtop fluorescence spectrometer Dodpfx Aexx Ax Rebtewb Control Software :Cary WinFLR Light Source:Xenon flash lamp (80 Hz) with 10-year warranty on new instruments Maximum Scanning Speed :24,000 nm/min Modes of Operation:Fluorescence,Phosphorescence,Chemiluminescence,Biolumi nescence,Time resolved phosphorescence. Power Requirements:100-240 VAC, 50/60 Hz Spectral Bandwidth Emission: 1.5 nm, 2.5 nm, 5 nm, 10 nm, 20 nm & 10 nm round nm Excitation: 1.5 nm, 2.5 nm, 5 nm, 10 nm, 20 nm & 10 nm round nm Wavelength Accuracy:± 1.5 nm Wavelength Range:Operational emission: 200 - 900 nm Operational excitation: 200 - 900 nm Depth:644 mm Height:271 mm Weight:30 kg Width:608 mm

Condition: new, *IMMEDIATELY AVAILABLE* Includes: Door/ramp combination, side door Equipment: - Aero Poly body - Ramp/door combination - Supports Net price: €15,546.22 / Gross price: €18,500.00 Article number: BVB235401820.01 Technical data: • Brand: Brian James • Model: Box Van 600 • Vehicle type: Box trailer • Vehicle condition: New • First registration: Without first registration • TÜV/MOT: 2 years from first registration • Internal dimensions (LxWxH): 419 x 178 x 201 cm • External dimensions (LxWxH): 589 x 228 x 259 cm • Loading height of the floor: 44 cm • Permissible total weight: 3,500 kg • Unladen weight: 1,025 kg • Payload: 2,475 kg • Chassis: High-loader (wheels under the body) • Tires: 155/70R12C • Suspension: ALKO rubber spring axle • Support wheel: Yes • 100 km/h approval: Optional, can be retrofitted DESCRIPTION • Black body made of high-quality, glass fiber reinforced plastic. Light in weight, yet extremely stable. • Daylight roof extending the entire length of the trailer. • 12-inch aluminum rims - black/silver • Maneuvering handles at the front and rear Djdpfjzy Awcex Abtjwb • Side doors on the front left and right, lockable • Full-height and full-width rear tailgate, lockable • Innovative door/ramp combination with extremely simple operation via the door lock: Can be used as a hinged door, ramp, or a combination of both. • Both ramps at the rear can also be individually switched to function as a door. • Internal height 2010 mm - Entry height at the rear 1990 mm • Recessed lashing rails on the left, right, and in the middle in the floor • Numerous lashing points offer flexible lashing options • Lashing rails mounted on the left and right on the side wall • Very stable steel frame, welded • Frame completely hot-dip galvanized • Spare wheel with holder mounted • Very stable V-drawbar, REINFORCED • ALKO overrun device and parking brake • Reversing assistance system • Steel casting coupling head with integrated high-security lock ALKO • Plastic mudguards • Rear supports at the rear on both sides with clamping bracket • 13-pole plug • Reversing lights • LED interior lights recessed in the roof with solar panel • Large LED safety lighting • Integrated rear fog light • Various marker lights at the front, side and rear • Heavy-duty support wheel • 5-year chassis warranty _____ Accessories can be retrofitted by our specialist workshop!! - Please feel free to request any desired additions! _____ - Financing or leasing possible - Nationwide delivery possible - All prices include VAT - Vehicle registration document can be sent in advance or transfer license plates (Germany) can be provided. - Export license plates incl. customs registration possible Descriptions and images are protected by copyright!! Anhänger Zentrum BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 1,200 trailers immediately available for you! We have been Brian James / Blyss / Debon / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Lorries / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialist dealer & repair - workshop for over 30 years. - Errors, omissions and prior sale excepted -

Condition: new, functionality: fully functional, machine/vehicle number: NEW-2, empty load weight: 782 kg, maximum load weight: 1,918 kg, overall weight: 2,700 kg, axle configuration: 2 axles, loading space length: 3,060 mm, loading space width: 1,700 mm, loading space height: 300 mm, suspension: other, tire size: 195 / 50 R 13, color: silver, trailer brake: trailer braked, Year of construction: 2026, brakes: other, SARIS K3 306 170 2700 2 Three-sided tipper + Integrated aluminum loading ramps + electric tipping control NEW VEHICLE Internal dimensions: 306cm x 170cm Side panel height: 30cm Loading platform height: 75cm Total weight: 2700kg Payload: 1974kg Braked tandem axle trailer Overrun brake and handbrake by AL-KO 2x 1350kg axle and brake Low chassis Fully welded, hot-dip galvanized steel frame Integrated aluminum loading ramps in the ramp compartment, 2.8t load capacity Electric tipping control 12V 95Ah AGM battery Electronic tipping limiter Plug + socket for charging Aluminum profile side panels with tensioning latch Can be folded down and removed on all sides 15mm thick, non-slip and robust screen-printed wooden floor Additional steel plate on the wooden floor Automatic support wheel with 400kg support load 8 noise-reducing lashing eyes with 800kg tensile force Reinforced 13" C tires with steel valve M+S tires Net/rope hook on the frame 13-pin plug LED marker lights at the front Rear lights with reversing light and triangular reflector Upper frame mounted on rubber Large tipping angle of 49 degrees backwards Lateral tipping by repositioning the safety pins Hand pump with adjustable handle U-rail for attaching the original SARIS loading ramp OPTIONAL ACCESSORIES PERMANENTLY REDUCED IN PRICE FROM FEBRUARY 2026 -Equipment for 100km/h (shock absorbers) -Spare wheel with holder -without side panels (price reduction) -Black Edition (Powder-coated side panels and rims in black) -35cm side panels -Charger -Remote control -Bluetooth remote control -Emergency hand pump in combination with electric operation -Safety support for maintenance work on the tilted vehicle -Folding crank rear supports -Complete LED lighting -Anti-theft device -Net with fine or coarse mesh -H-frame -Leaf grid in various heights, also closed -Extension side panels 30cm with tensioning latch -Flat cover with or without bow -High cover 160cm - 200cm More accessories available upon request! plus freight to Gera and vehicle registration certificate 250 € net Pictures are for example purposes only and may show optional accessories that incur an extra charge. Dodpfx Abezxr Smstowb Haven't found the right trailer yet? We have 50-100 vehicles permanently in stock and available for immediate pickup. The workshop is open on weekdays from 8:00 am to 5:00 pm for all types of repairs. Specialist in axle repair, also for caravans. In addition, we have a large selection of spare parts and accessories for trailers from various manufacturers. A wide selection of rental trailers can be found with us. Visit us online or come by!

Condition: used, Year of construction: 2011, total width: 2,400 mm, total length: 4,500 mm, total height: 2,200 mm, Empty weight: 3.000 kg Price: On request Dwsdoxrz Hmjpfx Abtjb Including various accessories, replacement parts and spare parts - Year: 2011 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Serial number: 289.112 - Drive system: CNC - Control system brand: Beckhoff - Power [kW]: 16.8 - Resonator brand: Hypertherm - Resonator type: Powermax 105 - X-axis travel [mm]: 3000 - Y-axis travel [mm]: 1500 - Max. material thickness [mm]: 32 - Control type: Beckhoff - Transport dimensions: 4500mm x 2400mm x 2200mm (l x w x h) - Transport weight [kg]: 3000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: like new (used), Year of construction: 2021, operating hours: 50 h, functionality: fully functional, machine/vehicle number: 0112-196, type of input current: three-phase, total width: 115 mm, total length: 400 mm, total height: 100 mm, input voltage: 400 V, Petratto Mini Metro 78 modular folding and gluing system (2021), consisting of two identical modules. Dwodezp Nkujpfx Abtob The machine has been lightly used and is in excellent condition. It consists of two Mini Metro 78 modules, providing a flexible configuration for a wide range of folding and gluing applications. The system is equipped with various accessories and tooling for folding and gluing, making it suitable for the production of presentation folders, sleeves, wallets, envelopes, cartons and many other paperboard converting applications. The modular design allows different configurations depending on the job requirements. The machine has been well maintained, is fully operational, and is ready for production. It is being offered for sale only because we have had very limited demand for this type of work.

Condition: good (used), Lathe Angelini MAS 160 (similar to Weiler Primus) Spindle speeds: 45-2840 rpm Three-jaw chuck: 140 mm Spindle bore approx. 35 mm Tailstock MK3 Dedpfx Aoy Ryrhsbtowb Distance between centers: 500 mm Center height approx. 140 mm Coolant system 2 tool holders and various accessories (blue box) The machine has been inspected and runs perfectly

Condition: defective spare-parts repository (used), Year of construction: 2013, operating hours: 2,281 h, functionality: not functional, machine/vehicle number: 8000221147, working width: 850 mm, overall weight: 350 kg, tank capacity: 170 l, water tank capacity: 145 l, battery voltage: 36 V, IPC Cleantime 160BT85, Ride-On Scrubber Dryer - Not operational - Faults: Brush motor / Rear wheel / Front wheel (drive) Without brushes / without batteries / without charger Color: green Working width: 850 mm (squeegee width 1010 mm) Solution tank: 145 l Recovery tank: 170 l Brush motor: 2 x 500 W Drive motor: 560 W Weight: 353 kg Various brushes, pad holders, and additional accessories available on request! Dwsdpoxlqq Usfx Abtob Key features: - 3 selectable programs for light, medium, and intensive cleaning - SLS system: brush head automatically compensates for uneven floors - Tool-free brush change from operator seat via button press - Solution flow adjusts automatically to driving speed - Continuously variable fresh water supply - Excellent service accessibility to all components - Flashing beacon as standard - Robust, impact-resistant plastic tanks - Large cleaning opening on recovery tank - Tilting tank for easy cleaning - Automatic squeegee lift in reverse - Automatic shutdown of brushes and water supply when stationary - 4-way reversible and tool-free squeegee blade replacement - Display with hour meter and diagnostic system - Quiet operation due to high-grade sound insulation

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, laser power: 30 W, type of cooling: air, total width: 404 mm, total height: 590 mm, total length: 556 mm, overall weight: 35 kg, table height: 100 mm, table length: 350 mm, table width: 170 mm, space requirement width: 404 mm, space requirement height: 590 mm, working height: 100 mm, space requirement length: 556 mm, working width: 350 mm, Professional Laser Engraving Machine Magic L3 30W - Great Opportunity! For sale is our high-quality Magic L3 laser engraving machine with a 30W fiber laser source. TECHNICAL DATA: • Model: Magic L3 30W (Red Technology) • Laser Type: 30W Fiber Laser • Original Price: 15,490 EUR (see manufacturer's website) • Working Area: 350 x 100 x 170 mm (W x H x D) • Engraving Speed: up to 4000 mm/s • Dimensions: 556 x 404 x 590 mm • Weight: approx. 35 kg ✅ CONDITION & USAGE: • Period of Use: February 2022 to September 2025 • Low Usage: Used only a few times per day for short periods • NO industrial continuous operation! • Well-maintained and fully functional • Automatic safety cover functions perfectly • Adaptive cooling system runs quietly and reliably IDEAL FOR: • Jewelers and goldsmiths Dwedoznnctepfx Abtjb • Engraving on gold, silver, stainless steel, aluminum, brass • Various engraving techniques: hatching, contour, blackening • Serial numbers, logos, texts, graphics SCOPE OF DELIVERY: • Magic L3 laser engraving machine • MagicArt 7 software (easy to use!) • Original accessories • Additional accessories available (see my other listings) ⭐ SPECIAL FEATURES: • Automatic safety cover (closes before laser operation) • Exhaust set connection available • Supports DXF, PLT, SVG, DGN, JPEG, PNG, BMP • Automatic number generation for series • Very low maintenance and long-lasting • German software interface possible PRICE: 8999 EUR (negotiable) A fair offer for a professional device in top condition! CONTACT & INSPECTION: • Inspection and demonstration possible by appointment • Pick-up only / Shipping by arrangement • VAT can be shown on request If you are interested or have any questions, please contact me! Keywords: Laser engraving, fiber laser, engraving machine, jeweler, goldsmith, jewelry engraving, metal engraving, Red Technology, Ingraser, marking laser

Condition: new, Year of construction: 2026, functionality: fully functional, total height: 850 mm, total length: 3,000 mm, total width: 1,500 mm, table height: 850 mm, table width: 1,500 mm, overall weight: 800 kg, height adjustment type: mechanical, Welcome, The welding table manufacturer, ATRIBU, offers a new welding table designed for both professional industrial environments and demanding hobbyist workshops. Short Description: DIMENSIONS: Tabletop: 3000 x 1500 mm with 200 mm high side walls. Both tabletop and side walls are 15.0 mm thick. HOLE SYSTEM: Precision-milled and chamfered holes, System 28 mm, 100 x 100 mm grid, with engraved scale/grid. MATERIAL: S355 J2+N Steel (high-strength structural steel). REINFORCEMENTS: Internal ribbing (160 x 6 mm plates) spaced every 40 cm for maximum stability. TOLERANCES: Maximum deviation of 0.5 mm per meter length. Maximum angular deviation of 0.5°. LEGS: 80 x 80 x 3 mm profiles, bolted, height-adjustable with swivel feet. Height adjustment range: 85–90 cm. PRICE: The price includes the table with standard metal-profile legs (wheels are not included in the base price). Swivel castors in various load capacities are available as an option for an additional fee. Full VAT invoices are issued. Detailed Description: Our tables are manufactured from high-grade S355 J2+N steel. The use of harder structural steel significantly reduces premature hole wear and ensures maximum structural durability. All holes are precision-milled and chamfered for optimal fit and tooling quality. Side walls are also made of S355 steel and feature a double row of holes. Table flatness remains within a maximum tolerance of 0.5 mm per meter. For tables of this size, we typically achieve a flatness of 0.2 mm per meter, ensuring near-perfect surfaces. The tabletop is protected with a mill scale layer for initial corrosion resistance. Additionally, each table is treated with a professional anti-spatter agent with a corrosion inhibitor prior to shipment. [Our welding tables are not plasma nitrided.] Robust internal ribbing provides necessary rigidity, even when welding heavy or complex assemblies. We also supply a full range of professional tools and accessories. Shipping: Affordable shipping across Europe is available (approx. 50–300 EUR depending on table dimensions). VAT Information: For private customers: Local VAT rates apply. Intra-community supply (B2B): With a valid EU VAT number, purchase at 0% VAT is possible. Custom Orders & Other Systems: Need a different size or thickness? We are happy to design and manufacture a customized solution for your requirements. Available Systems & Specifications: Hole Systems: System 28 / System 16 Tabletop Thicknesses: 8.0 mm / 12.0 mm / 15.0 mm Standard Sizes: 1200 x 800 mm 1200 x 1200 mm 1800 x 800 mm 2000 x 1000 mm Dedpfxoy Atrxj Abtowb 2400 x 1200 mm 3000 x 1500 mm Options: Wheels with 300 kg or 100 kg load capacity, HEX grid (additional holes), 50 x 50 mm grid. Available Accessories: Table extensions, towers, clamps, squares, bolts, accessory organizers, and more. Note: Welding tables are supplied without accessories. Please consult our catalog to select your tooling set. How to Order / Contact Us: Inquiry: Please send us an email with your requirements (size, thickness, etc.). We highly recommend requesting our comprehensive catalog, as selecting the right accessory set is essential for efficient work. Order: Once you’ve finalized your configuration, orders can be placed via email. We look forward to hearing from you! We welcome both long-term cooperation and single orders. Best regards, Team ATRIBU

Condition: good (used), Year of construction: 2013, TX8i-s / WinFlexIPS Bar diameter up to Ø 32 mm Design allows for conversion between long and short turning Controlled axes: 9 Tool holder WRV on top, X/Y/Z dual drive Counter spindle with WRV on the bottom, separate drive Dwjdpfxozzahze Abtjb Rear unit with drive Rated voltage 400 V, 3~, N, PE · 50 Hz Connection power 28 kVA, pre-fuse 63 A Recommended supply line: 16 mm² up to 30 m, otherwise 25 mm² Total drive power 46 kW · 73 A Compressed air requirement approx. 300 Nl/min Machine weight 6,850 kg Dimensions L × W × H 3,870 × 1,670 × 2,500 mm Safety standard EN ISO 23125, design type 3 small - Coolant lubrication with cutting oil — internal feed 30 bar, medium pressure 20 bar, high-pressure internal cooling 80–120 bar with its own pump - Coolant treatment system with strip filter (ELBARON) - Mist extraction and fume separator - Fire protection and extinguishing system — prerequisite for unmanned shifts with oil - Workpiece removal with linear unit (part gripper) - Incl. various clamping jaws - Linear measuring system in the X-axes - TRAUB tool monitoring and WinFlexIPS programming - Bar loader FMB turbo 3-36 for bars up to 3,200 mm, with synchronous and displacement device - Chip conveyor, hinged belt - Color: Dust gray RAL 7037 Machine operating time approx. 30,600 hours Machine price without the shown accessories (extensive accessories can be purchased separately) Errors and prior sale excepted. The machine can be inspected under power with short notice.

Condition: repair required (used), Year of construction: 1996, functionality: fully functional, machine/vehicle number: 2772, pressure: 12 bar, power: 6,744 kW (9,169.28 HP), Used steam boiler, MAHY TME.25, no. 2772, year 1996. Test pressure 12 barg, operating pressure possible up to 11 barg. The stated price is for the boiler in its current condition, but we can offer various additional options. For example: new insulation, control panel, overhaul and pressure test, burner and accessories, installation, etc. Dedjyu Iqrepfx Abtowb

Condition: good (used), mileage: 579,441 km, power: 118 kW (160.44 HP), first registration: 09/2001, fuel type: diesel, tire size: 215/75R17,5, axle configuration: 4x2, wheelbase: 3,650 mm, fuel: diesel, color: orange, driver cabin: day cab, gearing type: mechanical, number of gears: 5, emission class: euro2, suspension: steel, total length: 7,100 mm, total width: 2,400 mm, total height: 3,100 mm, loading space length: 4,860 mm, loading space width: 2,210 mm, loading space height: 1,950 mm, Year of construction: 2001, Equipment: ABS, = Additional Options and Accessories = - Tachograph (driver’s control unit) - Fixed - Halogen lamp - Short cab - Manual - Reversing camera - Fabric = Notes = Configuration: 4x2, Payload: 3330 kg, Unladen weight: 4160 kg, Gross vehicle weight: 7490 kg, Total tank capacity: 140 liters, Fifth wheel coupling: Fixed, Winch pulling capacity: 310 tons, Cab type: Short cab, Tachograph (driver’s control unit), Color: Orange, Reversing camera, Lighting type: Halogen lamp, Engine power: 118 kW (158 hp), Fuel: Diesel, Euro: 2, Transmission type: Manual, Gears: 5, Clutch pedal, Power steering, ABS, Seat configuration: 1+1, Seat covering: Fabric, Seat adjustment: Manual, Spare wheel, Spare wheel tread depth: 1% = Additional Information = Axle configuration Tire size: 215/75R17.5 Dwjdpfx Absy Turhotsb Brakes: Disc brakes Suspension: Leaf spring suspension Axle 1: Steered; Tire tread depth left: 6 mm; Tire tread depth right: 7 mm Axle 2: Dual tires; Tire tread depth left inner: 3 mm; Tire tread depth left outer: 6 mm; Tire tread depth right inner: 3 mm; Tire tread depth right outer: 4 mm Weights Unladen weight: 4,160 kg Payload: 3,330 kg GVW: 7,490 kg Functional Loading platform height: 95 cm Condition Technical condition: good Optical condition: good Damage: none Number of keys: 1 Identification License plate: BL-JD-20 = Company Information = Kleyn Trucks is one of the largest independent used vehicle dealerships in the world. Here you can choose from a constantly changing stock of 1200 used trucks, tractors, and trailers. Our range includes all European brands from various years of manufacture and price ranges. Why buy from Kleyn Trucks? Simple! • Large, rapidly changing stock • Recognizable quality • A good price • Correct business practices • We speak many languages • We understand our customers • Assistance with import and transport • (Export) registration can be arranged quickly • Expert technical services • The security of "recognizable quality" • And more.... Please visit our website for special offers and a complete inventory: Leasing through Kleyn Trucks is possible in most European countries! Quickly calculate your leasing rate and submit a request via our website. Ask directly about our European warranty package.

Condition: excellent (used), Year of construction: 2024, Stäubli TS2-40 SCARA Industrial Robot Manufacturer: Stäubli Faverges SCA Type: TS2-40 Robot Year of Manufacture: 05/2024 Machine Type: 4-Axis SCARA Industrial Robot Controller: Stäubli CS9 For sale is a used Stäubli TS2-40 SCARA industrial robot with CS9 controller and SP2 handheld device. This compact robot system is designed for fast and precise pick-and-place, assembly, handling, and automation tasks. The system is suitable for various applications, including electronics manufacturing, machine loading, packaging technology, laboratory automation, quality assurance, and general industrial applications. Technical data: Manufacturer: Stäubli Faverges SCA Model: TS2-40 Robot type: SCARA robot Dodpfezlhvuex Abtjwb Number of axes: 4 Robot year of manufacture: 05/2024 Reach: 460 mm Rated payload: 2.4 kg Maximum payload: 8.4 kg Z-axis stroke: 200 mm Repeatability XY: ±0.01 mm Repeatability Z: ±0.004 mm Repeatability Rz: ±0.002° Mounting type: Floor mounting Performance data: Maximum speed axis 1: 550°/s Maximum speed axis 2: 720°/s Maximum speed axis 3: 2,500 mm/s Maximum speed axis 4: 2,500°/s Cycles per minute: up to 240 Power consumption according to VDMA 24608: approx. 0.397 kW Controller: Manufacturer: Stäubli Type: CS9-TS2-40 Controller: CS9 Controller year of manufacture: 04/2024 Controller version: Rackable Power supply: 1 × 230 V AC / 50–60 Hz Connected power: 1,700 VA Communication: Ethernet / PROFINET Device Software: VAL 3 activated Handheld device: Manufacturer: Stäubli Model: SP2 Touchscreen color display Integrated emergency stop switch Operation and programming of the robot system Power supply: 24 V DC / 0.5 A Equipment: Stäubli TS2-40 SCARA robot Stäubli CS9 robot controller Stäubli SP2 handheld device Robot and connection cables Pneumatic and electrical connections in the robot arm Ethernet interface PROFINET interface VAL-3 programming system Gripper mounting according to images RoboticsControls software / DVD Technical documentation Dimensions: Maximum reach: 460 mm Z-axis stroke: 200 mm Dimensions CS9 controller (H × W × D): approx. 270 × 445 × 365 mm Condition: Used Year of manufacture 2024. Optical condition according to images. Scope of delivery: Stäubli TS2-40 SCARA industrial robot Stäubli CS9 controller Stäubli SP2 handheld device Robot cable and connection cables RoboticsControls software / DVD Technical documentation Accessories according to images Scope of delivery as shown in the pictures. The table shown in the photos, as well as any other items not explicitly mentioned, are not part of the sale. Subject to changes, errors and prior sale.

Condition: used, Year of construction: 2017, input voltage: 400 V, compressed air connection: 7 bar, type of input current: three-phase, power: 94 kW (127.80 HP), We are offering this used ROQ ROQPRINT ECO P14 XL screen printing machine, year of manufacture 2017. Includes a ROQ screen printing dryer from 2014. Both units are in good working condition with no known issues. The package includes numerous accessories such as various pallets, screen printing frames specifically designed for the Roq click system, squeegees, and extra squeegee rubbers. Optionally available: a table for fitting the click system onto the frames, a film printer, and a machine for sharpening squeegees. In short, everything you need to start immediately or take a significant step towards more professional production. Model: ROQPRINT ECO P14 XL Serial number: RPE-1601 Year: 2017 Dwjdpfxjyzr Suj Abtob Active power: 94 kW Voltage: 3×400 VAC Power: 94 kW Air pressure: 0.7 MPa (100 Psi) You are always welcome to visit and inspect the equipment. Some accessories are also sold separately. If you have any questions or need more information, please feel free to send us a message or give us a call.

Condition: used, functionality: fully functional, Equipment: foot remote control, We are selling a well-maintained profile steel shear/punching machine, Peddinghaus Type 210 AD/13, from our workshop. Integrated functions: Hole punch Bar steel shear Profile steel shear Flat steel shear Notching device The machine thus combines several processing steps in a compact unit and is ideally suited for flexible use in steel and metal construction. Condition: The Peddinghaus is in perfect working order and is ready for immediate use. Dwsdpsziz Ewjfx Abteb Accessories: Various tools included Foot pedal available Important note: Due to the machine's high weight, shipping is unfortunately very difficult or only possible with significant logistical effort. We therefore recommend picking it up. Inspection: The machine can be inspected on-site at any time and tested during a trial run – this way, you can convince yourself of its functionality. We are available to answer any questions and provide further details.

Condition: good (used), Year of construction: 2019, functionality: fully functional, power: 8 kW (10.88 HP), input voltage: 400 V, cutting height (max.): 360 mm, cutting width (max.): 500 mm, Equipment: CE marking, FOR SALE: PEGAS 360x500 SHI-LR – Semi-Automatic Band Saw for Professional Use For sale: High-performance, heavy-duty PEGAS 360x500 SHI-LR band saw designed for demanding metalworking applications. This machine offers an impressive cutting capacity and an efficient semi-automatic operation cycle. KEY FEATURES • Semi-Automatic Cycle: After manual adjustment of the vices, hydraulic clamping, cutting, and frame return are performed automatically according to user-defined parameters. • High Capacity: Capable of cutting round stock up to 360 mm and rectangular profiles up to 500 x 360 mm. • Versatile Mitre Cutting: The saw arm swivels to both sides (left/right) with precise mitre angles of 45° and 60°. • Infinitely Variable Speed Control: Blade speed is steplessly adjustable from 20–100 m/min, providing optimum cutting settings for various materials. TECHNICAL DATA • Blade Dimensions: 4780 x 34 x 1.1 mm • Drive Power: 3.0 kW (total power input 7.7 kW) • Controls: Hydraulic frame feed and vice clamping, manual material feed and blade tensioning. • Coolant & Cleaning: Equipped with an integrated coolant pump (0.44 kW) and a pulley-driven cleaning brush, maximizing blade lifespan. • Dimensions: Length: 2873 mm Width: 1080 mm Weight: 715 kg • Table Height: 812 mm CUTTING CAPACITY (mm) Angle Round (D) Rectangular (a x b) 0° 360 mm 500 x 360 mm 45° 360 mm 440 x 240 mm 60° 300 mm 290 x 280 mm STANDARD ACCESSORIES INCLUDED • Band saw blade • Set of service spanners • Operating instructions (on CD) Djdpfjy Rvcpox Abtjwb This saw is a robust and reliable solution for any workshop looking for precision and heavy-duty cutting performance. Built with durability and ease of maintenance in mind.