Used Vacuum Dry Chamber for sale (7,362)

Condition: used, Year of construction: 1988, Manufacturer : Comber Model: Pharmadry PH 100 Year : 1988 Type : vacuum dryer   Maximum temperature: 99°C Material: 304 and 316 stainless steel (in contact with product). Classification: Atex EEx IIB T4   Main tank diameter : ø 500 mm Main tank depth: 700 mm Bsdpfx Afsx R Avionewh Power: 4 HP Filter Pressurised receiver tank Tubular heat exchanger   Gaskets: new Paint: new Mechanical seal: As is, good condition

Condition: used, // Sold as is or reconditioned // Vacuum paddle dryer mixer Used for products such as powders/powdery substances. 316 stainless steel Bsdpfjx Rz Spex Afnowh Tank diameter 1000 x 2000 Volume: 1100 litres Jacketed 86 litres / 1 bar - 120°C Heated agitator 235 litres / 1 bar - 120°C Agitation by 8 scraping blades Loading via 400 diameter Discharge 350 diameter with guillotine valves ADF 15 kW motor Self-cleaning filter

Year of construction: 2026, condition: reconditioned (used), functionality: limited functionality, machine/vehicle number: 559, Dryer optimized for thick timber or hardwood Usable length: 5000 mm Usable height: 1100 mm Usable width: 1100 mm New electrical cabinet and sensors Controlled drying function Missing external rail and trolley (can be supplied or we will assist the buyer with fabrication) Dryer can be inspected in department 74 Bedpfx Ajya Ik Ajfnewh

Condition: excellent (used), Here we offer you a chamber dryer. Outer dimensions approx. width: 1.885 mm depth: 1.200 mm height: 2.425 mm Usable space dimensions approx. width: 1.030 mm depth: 1,000 mm Bodpfsgm Hwuex Afnowh Height: 2,100 mm Usable space: 2.2 m³ Nominal temperature: 100 °C Working temperature: 85 °C Heating medium: 3 x 400 V, 50 Hz Heating capacity: 20 kW Circulating air volume: 4,500 m³/h / 400 Pa Motor power: 1,1 kW Protection class: IP 54 The chamber heating furnace must not be used for flammable or explosive substances. The chamber heating furnace must not be installed in the Ex-area. Paternoster device External dimensions: Height: 1,880 mm Width: 809 mm Depth: 950 mm support sets: 13 pieces Pitch: 228 mm Carrying set width: 354 mm Carrying set depth: 320 mm useful height: 135 mm Power of drive motor: 0.25 kW at 189 Nm Transport speed: on average 5 m/min. Payload/carrier set: max. 10 kg total payload: max. 130 kg total weight loaded: max. 730 kg year of construction: 2005 Type: Ke/SO Condition: used / used Scope of delivery: (See picture) (Changes and errors in the technical data, data are reserved!) Further questions we can answer on the phone for you.

Condition: used, WSA Lignomat vacuum dryer Control unit: Bollmann Tromatic 910GH Depth approx. 10 m Bwsdpsxxpdtofx Afnoh

Year of construction: 2001, condition: excellent (used), RICE REDUCTION!!! Instead of 1.150 EUR only 950 EUR!!! Dryer with material conveyor Moretto Bwjdpfspgultox Afnjh Type SHD25 power 2940 Watt Moretto material conveyor Type T 2L Vacuum pump Moretto Type VI T2

Condition: ready for operation (used), Technical characteristics tank 1000 mm tank length 4600 mm trays dimension 700 x 4000 mm height 700 mm max closed length 4700 mm electric boiler programming example: wood thickness 45/60 mm initial humidity 35/45% plate temperature 45/60 C ° total time 90 H (manufacturer data cannot be committed) Power and Motors Voltage: 400 V Bedpfot Hzvwjx Afnswh Pluging: Three-phased Overall dimensions Lenght: 4600 mm Width: 1000 mm Height: 1100 mm Weight: 1500 Kg

Condition: ready for operation (used), Technical characteristics Bwjdpfxot Hzvqs Afneh Total volume 1,6m3 Length 4800 mm Width 700 mm Loading height 500 mm Brand new membrane Cycle and temperature adjustable on the control panel according to the species and thickness of the wood Brand new heating resistance and vacuum pump 6 heating plates Ideal for carpentry and fast drying (-90h) of small volumes of lumber Power and Motors Overall dimensions

Condition: ready for operation (used), Technical characteristics Volume: 12 m3 Useful dimensions : Length 7400 mm Width 1500 mm Height : 1350 mm External dimensions: 8400 mm x 2700 mm 28 circulation heating plates (Dimensions 6400 mm x 700 mm) Completely revised Bwodpfx Afet Hzvksnjh New vacuum pump 5,5 kW (TRAVIANNI) Power and Motors Overall dimensions

Year of construction: 2002, condition: excellent (used), Parts in contact with the product are made of stainless steel 1.4571, the rest of the dryer is made of 1.4301. Bedpfeitcu Esx Afnjwh Machine Name: Continuous Horizontal Vacuum Paddler Dryer used Manufacturer: AVA / Holland Merten GmbH Type: HTK 200 Construction year: 2002 Speed: 107 rpm Material: 1.4301 Driving force: 5,5 kW Model: EExdellCT4 Total content: 235 Liter Parts in contact with product: 1.4571 Equipment: Double jacket, mechanical seal Dimensions: L 3400 x W 1100 x H 1500 mm Empty weight: approx. 1600 kg Technical documentation: Yes Message: Operating temperature 130°C Design temperature 200°C Internal pressure mixer -1/+3 bar Pressure double jacket +6 bar Accessories: Base frame Condition: Used

Year of construction: 2025, condition: new, functionality: fully functional, overall weight: 700 kg, total length: 2,860 mm, total width: 1,230 mm, construction height: 1,700 mm, Fully operational exhibition dryer, Ø 1090 mm We are offering our fully operational exhibition dryer with a diameter of 1090 mm. The unit is very compact and practical in terms of required space and easy relocation. Technical Details: Connection: only a water connection for spraying and a 16A power plug are required Heating system: 4 kW electric heater Wood moisture measurement at 3 measuring points Bjdpfx Afoxbz Hrjnowh Plug-and-play design – ready for immediate use Advantages: Ideal for small carpentry workshops Easy to transport and flexible positioning

Condition: used, No. 3213 Thermal treatment system / vacuum dryer WTT Used, year of construction 2017 Thermal treatment system / thermal chamber for the modification of wood The WTT thermal chamber is a system for the thermal modification of wood. It enables efficient treatment of 2 to 3 batches per day, depending on the thickness and type of wood. The system has a powerful energy and heat transfer system and works with a gas or oil-fired boiler system that uses thermal oil as a heat transfer medium. Technical data: Capacity: 5950 - 9900 m³ of wood per year (for 330 working days) Usable volume: 9 m³ (with 50 mm wood thickness) Stack dimensions: 10500 x 1300 x 1100 mm LWH Bsdpev Si Szsfx Afnjwh Minimum board thickness: 10 mm Power connection: 3 x 400 V, 50 Hz + zero + earth, 63 A Specific power consumption: 15.9 kW/m³ Maximum heat output: 2 MW (230 °C - 250 °C thermal oil) Heat consumption: 120 kWh/m³ wood Autoclave length: 11,000 mm Autoclave diameter: 1,800 mm Autoclave material: 10 mm stainless steel duplex EN 4462 Door opens hydraulically, with 1.5 kW drive Working pressure: 0.1 to 15 bar (absolute) Working temperature: 0 °C to 220 °C 200 mm glass wool insulation, clad with 1 mm galvanized sheet steel Main components: 1. autoclave, in which the heat treatment takes place 2. vacuum system that sucks the air out of the autoclave before heat is applied 3. energy center with a 2 MW oil burner 4. 4 MW cooling system with dry coolers 5. nitrogen generator 6. gas cooler system Heating and cooling system: Heat exchanger: 8 units (4 on each side) Material: Stainless steel pipes (seawater resistant) Total floor area: 165 m² Cooling water consumption: 1000 l/batch (not contaminated, only heated) Control and operation: Control system: WTT ExoT (fully automatic) 22” color monitor, IBM computer, printer Sensors: 4 PT100 temperature sensors 2 mechanical thermometers 1 vacuum/pressure transmitter 1 mechanical vacuum/pressure gauge Special equipment: Hydraulic rail bridge for convenient transportation of wooden trolleys Automatic trolley extraction with cable winch (1.5 kW) 2 MW thermal oil boiler (heating) Fuel oil tank (4000 l) with measuring system Insulated 20 foot steel container for heating module Stainless steel safety chimney (300 mm diameter, 6000 mm length) Functional description: 1. filling the autoclave with wood 2. creating a pre-vacuum 3. filling with gas 4. heating 5. modifying 6. cooling 7. pressure equalization 8. creating a post-vacuum / drying 9. pressure equalization 10. emptying Certified EC Pressure Equipment Directive (PED) 97/23/EF Construction EN 13445 Sale on behalf of customer, from location near 5020 Salzburg (Austria), without dismantling, transportation and assembly Dismantling, loading and transportation by us optionally possible Subject to errors in the description and price To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended Sold as is Technical details, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “purchased as seen” Pictures and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices excl. VAT, payment before collection or dispatch Terms of delivery: ex location

Condition: as good as new (ex-display), Year of construction: 2021, Binder VDL 115 (2021) – Laboratory Vacuum Chamber, Perfect Condition, Demo Unit Model: Binder VDL 115 Year of manufacture: 2021 Condition: As new – showroom specimen, post-factory testing Capacity: 115 liters Power supply: 230 V Availability: Immediate Warranty: Yes (start-up warranty) VAT Invoice: Yes Location: Grabina 92-701, Poland Optional: Transport available — Description: We offer for sale a Binder VDL 115 vacuum chamber designed for drying organic solvents and flammable substances under vacuum conditions. This is a VDL safety series model meeting ATEX requirements, intended for operation in explosion hazard zones (class 3). The unit was used solely for demonstration purposes – it is in perfect visual and technical condition and comes with complete documentation. — Key features: • Temperature range: from +9°C above ambient to +200°C • Usable capacity: 115 liters • Interior made of stainless steel (1.4571) – chemically resistant and easy to clean • Controlled, safe vacuum with adjustable level • ATEX 2014/34/EU compliant, safety class 3 • Control panel with LCD display, programmable parameter regulation • Standard equipment: 2 aluminum shelves + inert gas valve — Applications: • Pharmaceutical and chemical industry • R&D laboratories • Drying of solvents, non-reactive materials, and temperature-sensitive samples • Production of electronic and precision components — Why it’s worth considering: • The chamber is in immaculate, as-new condition • No signs of wear, full technical documentation included • A perfect alternative to a new unit – no lead time • Attractive price, possibility for on-site testing or remote demonstration Bwjdpfx Aovq I Tnefnjh

Year of construction: 2020, condition: new, Description Automatic sprinkling chamber is a solution that allows you to reduce costs, improve quality and increase the efficiency of the surface preparation process. The automatic sprinkling chamber is equipped with a set of spray pumps, it was designed so that as little liquid as possible after the process migrates to subsequent processes, thus saving money and improving the quality of washing. This is very important, because apparent savings in systems made without the use of these solutions can generate in the future much higher costs associated with chemistry and waste disposal which will simply be more. Attention should also be paid to problems with maintaining the required bath parameters. Research and development work allowed us to develop a sprinkling chamber with the function of drying details (option) with hot air blown by a set of fans after the washing process. The sprinkling chamber is equipped with an advanced system for creating your own macro programs, which can consist of 10 steps each, depending on the number of tanks, processes can be repeated, their order can be changed, etc. Each tank has its own unique icon and name, enabling the operator to work intuitively. Optionally, the tanks can be equipped with bath replenishment systems, which can be performed e.g. between processes or at the end of the cycle. Bwjdpfx Afefzq Stsnjh • Control installed on the swivel arm for better access • PLC microprocessor control • 7 "touch operator panel • Very large number of nozzles, compared to other solutions • (Option) The possibility of drying details after the washing process • The ability to create your own advanced programs • Advanced damper system made of acid-resistant sheet metal, double protected by limit switches • Tight closing and full flap opening control system • To minimize fluid mixing, separate pipelines, nozzles, tanks for each treatment • Intelligent control - in the event of a power cut / sudden shutdown, no mixing of liquids possible • Fully automatic operation/ Prices are given in the catalog

Year of construction: 2020, condition: new, Description Automatic sprinkling chamber is a solution that allows you to reduce costs, improve quality and increase the efficiency of the surface preparation process. Bwedoflmdbjpfx Afnsh The automatic sprinkling chamber is equipped with a set of spray pumps, it was designed so that as little liquid as possible after the process migrates to subsequent processes, thus saving money and improving the quality of washing. This is very important, because apparent savings in systems made without the use of these solutions can generate in the future much higher costs associated with chemistry and waste disposal which will simply be more. Attention should also be paid to problems with maintaining the required bath parameters. Research and development work allowed us to develop a sprinkling chamber with the function of drying details (option) with hot air blown by a set of fans after the washing process. The sprinkling chamber is equipped with an advanced system for creating your own macro programs, which can consist of 10 steps each, depending on the number of tanks, processes can be repeated, their order can be changed, etc. Each tank has its own unique icon and name, enabling the operator to work intuitively. Optionally, the tanks can be equipped with bath replenishment systems, which can be performed e.g. between processes or at the end of the cycle. • Control installed on the swivel arm for better access • PLC microprocessor control • 7 "touch operator panel • Very large number of nozzles, compared to other solutions • (Option) The possibility of drying details after the washing process • The ability to create your own advanced programs • Advanced damper system made of acid-resistant sheet metal, double protected by limit switches • Tight closing and full flap opening control system • To minimize fluid mixing, separate pipelines, nozzles, tanks for each treatment • Intelligent control - in the event of a power cut / sudden shutdown, no mixing of liquids possible • Fully automatic operation/ Prices are given in the catalog

Year of construction: 2020, condition: new, Description Automatic sprinkling chamber is a solution that allows you to reduce costs, improve quality and increase the efficiency of the surface preparation process. The automatic sprinkling chamber is equipped with a set of spray pumps, it was designed so that as little liquid as possible after the process migrates to subsequent processes, thus saving money and improving the quality of washing. This is very important, because apparent savings in systems made without the use of these solutions can generate in the future much higher costs associated with chemistry and waste disposal which will simply be more. Attention should also be paid to problems with maintaining the required bath parameters. Research and development work allowed us to develop a sprinkling chamber with the function of drying details (option) with hot air blown by a set of fans after the washing process. The sprinkling chamber is equipped with an advanced system for creating your own macro programs, which can consist of 10 steps each, depending on the number of tanks, processes can be repeated, their order can be changed, etc. Each tank has its own unique icon and name, enabling the operator to work intuitively. Optionally, the tanks can be equipped with bath replenishment systems, which can be performed e.g. between processes or at the end of the cycle. • Control installed on the swivel arm for better access • PLC microprocessor control • 7 "touch operator panel Bedpfxjfy T Szs Afnswh • Very large number of nozzles, compared to other solutions • (Option) The possibility of drying details after the washing process • The ability to create your own advanced programs • Advanced damper system made of acid-resistant sheet metal, double protected by limit switches • Tight closing and full flap opening control system • To minimize fluid mixing, separate pipelines, nozzles, tanks for each treatment • Intelligent control - in the event of a power cut / sudden shutdown, no mixing of liquids possible • Fully automatic operation/ Prices are given in the catalog

Condition: new, Year of construction: 2026, functionality: fully functional, compressed air connection: 20 bar, total width: 500 mm, total length: 550 mm, total height: 1,000 mm, overall weight: 96 kg, input voltage: 230 V, warranty duration: 24 months, 💥 NozziTec X-Force Dry Ice Cleaning Machines – New & Immediately Available! 💥 Dry ice blaster / Cold Jet Quality Are you looking for top-quality industrial cleaning technology for your business? We offer brand-new NozziTec X-Force dry ice cleaning machines, exclusive and ready for immediate use. NozziTec is a leading manufacturer with over a decade of experience in dry ice cleaning technology — machines designed for maximum efficiency, reliability, and safety. 🛠️ Why choose NozziTec X-Force? ✅ Professional quality: Premium Polish engineering with rugged construction and high-grade components; ideal for demanding industrial environments. ✅ Durable & reliable: 24-month warranty and excellent support. ✅ Efficient & clean: Clean surfaces without water or chemicals — fast, sustainable, and environmentally friendly. ✅ Versatile: Perfect for maintenance, production cleaning, renovations, or deep degreasing in workshops, industry, and technical services. 📦 Available models 🔹 X-Force M1 – Efficient, low air consumption, and ideal for light to medium cleaning tasks. €21,000 🔹 X-Force M2 – Powerful all-round machine with extensive options for industrial applications. €23,000 🔹 X-Force M3 – 20 bar Unmatched cleaning power for the toughest conditions. €25,300 📌 Optional: Full range of accessories, nozzles, blast hoses & service kits available. 💼 Perfect for, among others: 👉 Injection molds and dies 👉 Industrial machinery & production lines 👉 Removal of paint, grease, oil, and fire residues 👉 Restoration and renovation of metal, stone, or wood 👉 Cleaning of electrical equipment (moisture-free) 📞 Quotation, demo, or questions? Interested? Request a quote, demonstration, or non-binding offer today! We are happy to assist you with tailored advice. Worldwide shipping. Bsdpfsyf Aaiox Afnswh

Condition: new, Year of construction: 2026, functionality: fully functional, overall weight: 30 kg, total length: 33 mm, total width: 40 mm, total height: 130 mm, operating pressure: 2 bar, final pressure: 2 bar, warranty duration: 24 months, Pneumatic Vacuum Liquid Filling Machine – Constant Fill Level This vacuum liquid filling machine operates fully pneumatically and requires no electricity. A small compressor is sufficient to operate the machine. Thanks to the vacuum-controlled constant-level filling principle, each bottle is filled to exactly the same liquid level, regardless of bottle volume variations. This ensures a consistent and professional final result. Compact, Lightweight, and Durable The machine is manufactured entirely from high-grade stainless steel, is compact in design, lightweight, and takes up little space. It is easy to place on a workbench, making it ideal for both production and testing environments. Versatile Applications Suitable for filling both small and larger volumes of liquid products, including: - Water - Perfume - Milk Bwedpfxsrivxyo Afnoh - Eye drops - Oils (such as sesame oil) - Beverages - Alcohol - And similar liquids Efficient Operation The machine is equipped with two filling heads, allowing for continuous operation. Depending on the operator and bottle volume, up to approximately 20 bottles per minute can be filled. Contact & Delivery For questions or further information, please feel free to contact us by email or telephone. Transport within and outside Europe is possible.

Condition: good (used), Busch Vacuum Pump Model 630 370 CFM Bjdpfx Afewa Nzqjnjwh

Condition: good (used), Busch Vacuum Pump Model 400 Bwjdpfxjwa Ra Uj Afnsh

Condition: good (used), Busch Vacuum Pump Type: 400-212 235 CFM Dimensions: 1300 mm x 800 mm x 1100 mm. Bodpfswa Ucgjx Afnjwh

Condition: good (used), Busch Vacuum Pump Model 400-212 Bwjdpfxowa Unpj Afnsh

Condition: excellent (used), I sell the pump FEZER 016-118 94213 Bedpsud Ryrjfx Afnswh - Pump in bdb condition. - Capacity 16m3/H

Condition: good (used), Forklift battery charger, industrial charger, forklift battery charger, industrial charger -24 volts -Power: 20 A -Connection: 230 volts -Number: 7 chargers available -Price: per piece -Weight: 18 kg/piece Bwsdpfx Asb A Hdzsfneh -functionally tested

Condition: excellent (used), Year of construction: 2002, ALU-profile mitre saw Fabr.Dry Tech Type:355 MLS Year 2002. Bodpjtwn E Usfx Afnewh Saw blade dm.355 mm Cutting range round max.120 mm Square max 120 mm X 120 mm