C22 Hastelloy 11m2 Vacuum Shelf Dryer

PINK

Condition: new, Year of construction: 2025, Working Area: 6100mm*1524mm/4000mm*1524mm/3048mm*1524mm Laser Output Power: 3000W/2000W/1500W/1000W Positioning accuracy: ±0.05mm Repositioning accuracy: ±0.03mm Max. linkage speed: 91m/min Max. acceleration: 1G 1. Stretched Aluminum Beam Kjdpfx Aeg Eglpoa Ejfa Aviation-level material with enhanced rigidity, greatly reduces beam deformation during high-speed operation, and improves high-speed directional sensitivity and processing efficiency. 2. Tenon-and-mortise Type Plate Welding Structure Bed Use Chinese traditional Tenon-and-mortise structure to provide stronger bearing capacity. Solder joint fixing and structural bearing ensure long-standing operation stability. Welded structure improves shock absorption effect, lowering deviation caused by shock, and offering more accurate cutting. 3. Double Automatic Centering Electric Chucks Double electric chucks with automatic centering function are easy to operate and require little maintenance. Brand new motor gives accurate control. Modular chuck components are independently developed and can be quickly replaced. 4. Automatic focusing function of laser head By setting perforation focal length and cutting focal length respectively, the cutting is more accurate. Suitable for multiple focal lengths, and focal position will be automatically adjusted based on thickness of different sheets. 5. Low Gas Pressure Alarm Function Real-time gas pressure detection and abnormal information report ensure cutting quality and precision, and remind operators to replace gas in time.

Year of construction: 2018, condition: new, Freeze dryer completly new. Pilot plant. Capacity:1 kg / 8hrs Effective Area :0.15 m2 Wet Input per 8 hr: 1 Kg Dry Output per 8 hr: 0,2 Kg Temp Range Drying: 30 ºC - 100 ºC Water Removal Capacity: 0,8 Kg Ultimate Condenser Temp: -40 ºC Defrosting Method: Natural Kfjdpfefn Iudsx Aa Eoa Total Connected Load : 1Ph/15 Amp Connection Average Connected Load: 1Ph/15 Amp Connection Plant dimensions: 1,1m*0,7m*1,5m 1. Freeze Drying Capacity: Wet input 1 kg. per shift. On a higher side, each shift shall be of 8 to 8.5 Hrs. The wet input can either be biological cultures, enzymes, polymers, extracts, sprouts, vegetables, fruits, nutraceuticals, herbs, spices, sea foods, instant curries/gravies etc. of minimum 15% solids. 2. Residual moisture: Final moisture content on the product shall be less than 4%. 3. Compressed air: Maximum pressure 5Kg/Sq.cm. Flow rate 3 cubic Meter/Hr. Material: Stainless steel 304 Flow rate vacuum pump: 13 m3/h

Condition: excellent (used), Year of construction: 1980, Westfalia Separator SA 40, used in beverage industry, in excellent condition. Kjdpfx Aaoq U Dbpe Ejfa

Condition: ready for operation (used), DANOBAT RTM 2500 – CNC Surface grinding machine | 2.500 mm Travel | 3.100 kg Table load High-capacity surface grinder designed for precision flat machining of large workpieces. Robust, accurate, and ready for demanding production environments. 🛠 Key technical features: • Max. grinding length: 2,500 mm • Max. grinding width (with 100 mm wheel): 900 mm • Max. grinding height (with Ø500 mm wheel): 1,000 mm • Table surface area: 2,500 x 800 mm • Max. table load: 3,100 kg Kfsdpfx Aaohq Ui Io Eja • Electromagnetic chuck: 2,000 x 550 mm • X-axis travel: 2,650 mm at 1–30 m/min • Z-axis travel (cross): 800 mm • Y-axis travel (vertical): 1,150 mm • Z feed speed: up to 8,000 mm/min • Y feed speed: up to 1,000 mm/min • Positioning resolution: 0.001 mm • Encoder measurement on Z and Y axes ⚙️ Grinding head details: • Wheel diameter: 500 mm • Bore diameter: 203.2 mm • Max. wheel width with recess: 100 mm • Peripheral speed: 26 m/s • Nominal speed: 1,000 rpm • Grinding motor power: 15 kW • Total installed power: 30 kW ✅ Additional features: • Prismatic guideways with Turcite coating • Angular grinding head • Paper band filtration system • Hydraulic unit power: 4 kW 📌 Perfect for high-precision large-part surface grinding. A solid solution for manufacturers who require size, stability, and sub-micron accuracy.

Condition: ready for operation (used), Size with continuous feeder: max 760x2000 mm min 150x180 mm Size cross fold: min 150x200 mm Size threefold: min 200x300 mm Size four fold: min 300x400 mm Speed: max 180 m/min Equipment feeder: • continuous feeder • vacutable 1st parallel folding unit: • 4 buckle plates • rear-mounted slitter shafts • noise prevention 1st cross-fold unit: • cross fold knife 2 nd cross fold unit: • cross fold knife left & right standard accessories: Ksdpfx Ajd N D Niea Ejfa • 1 set of operator manuals • 1set of electrical diagrams • further information: • as is, cleaned available: • immediately

Condition: ready for operation (used), Year of construction: 2008, • Glass thickness (mm): up to 30 Kedpfx Aaexgtqgo Eofa • Glass height (mm): up to 2000 • Cleaning brushes: 4 front and 4 rear

Condition: new, Year of construction: 2024, spindle bore: 82 mm, spindle speed (min.): 2,500 rpm, feed rate X-axis: 4 m/min, feed rate Z-axis: 8 m/min, overall weight: 2,750 kg, spindle nose: A2-8, power: 0.015 kW (0.02 HP), The Vurcon parallel cnc lathe is the perfect machine for your workshop, it is composed of a 6 position turret with a distance of 1500 mm in the Z axis travel and comes standard with the SIEMENS 828D control. Standard configuration cnc parallel lathe Vurcon PL50x1500 Numerical control Siemens 828D (PPU240) Shopturn function 15 kW main motor 2.500 rpm main spindle 6-position turret 3-jaw manual chuck USB interface Lubrication unit Kjdpfx Aasqmpbvs Eefa Coolant cooling system Complete fairing Electronic components CE marking

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, machine/vehicle number: 1000023523, Biesse Stream B MDS 2.0/15.0 is a single-sided edge banding center with automatic device with manual feeding to dimension and square panels in flexible way bу 4 run. Kfodpfx Ajpz Shkja Eoa Main technical data Сhаin advance speed: 10-25 m/min Panel length: 250-2700 mm Panel width: 120-1200 mm Panel thickness: 10-60 Panel weight: 75 kg Edge thickness: 0,3-3,0 mm Gluing unit: PU gluing kit, installed in place of to the standard device(EVA). The machine is equipped with a tool for processing edges with a radius R=1/1.5/2.0mm and a chamfer of 25 degrees. Technical condition: the machine is currently used in production.

Condition: excellent (used), Year of construction: 2001, Wenzel Lh 108 automatic measuring machine Measuring range: 1000x1600x800 Head: Renishaw Ph10M Tactile Sensor: TP20 Kfjdpfxoipq I Is Aa Eja Probe changer: -- Controller: Pantec Eagle Software: CMM Manager Lite 2024 Year of construction: 2001 Warranty: in terms to be agreed upon Description: machine fully functional and in excellent cosmetic condition: Pneumatic system completely overhauled;

Condition: ready for operation (used), Year of construction: 1999, A total of 7 weaving machines Dornier are available. 1) Dornier HTV8/SD, year of manufacture: 1991, working width: 3300mm. 2) Dornier HTVM/S, year of manufacture: 1998, working width: 3200mm. 3) Dornier HTVM/S, year of manufacture: 1998, working width: 3200mm. 4) Dornier HTVM/S, year of manufacture: 1998, working width: 3400mm. 5) Dornier HTV2/S, year of manufacture: 1998, working width: 4300mm. 6) Dornier HTV2/S, year of manufacture: 1998, working width: 4300mm. 7) Dornier HTV2/S, year of manufacture: 1999, working width: 4300mm. Starting from position 2, all machines are equipped with Neuenhauser winders. All machines are equipped for creel feeding and each equipped with 6 shaft units. Documentation available. An on-site inspection is possible. Individual sale possible. Kjdpfjxl Un Rox Aa Ejfa