Thermal treatment system / vacuum dryer
WTT Thermobehandlungsanlage / Vakuumtrockner

Condition

Used

Location

Salzburg

Thermal treatment system / vacuum dryer WTT Thermobehandlungsanlage / Vakuumtrockner

WTT Thermobehandlungsanlage / Vakuumtrockner

Machine data

Machine type:: Thermal treatment system / vacuum dryer

Manufacturer:: WTT

Model:: Thermobehandlungsanlage / Vakuumtrockner

Condition:: used

Price & Location

Location:: 5020 Salzburg, Österreich

Call

Details about the offer

Listing ID:: A18784181

Reference number:: 3213

Update:: 08.04.2025

Description

No. 3213

Thermal treatment system / vacuum dryer WTT

Used, year of construction 2017

Thermal treatment system / thermal chamber for the modiﬁcation of wood

The WTT thermal chamber is a system for the thermal modiﬁcation of wood. It enables efficient treatment of 2 to 3 batches per day, depending on the thickness and type of wood. The system has a powerful energy and heat transfer system and works with a gas or oil-fired boiler system that uses thermal oil as a heat transfer medium.

Technical data:

Capacity: 5950 - 9900 m³ of wood per year (for 330 working days)
Usable volume: 9 m³ (with 50 mm wood thickness)
Stack dimensions: 10500 x 1300 x 1100 mm LWH
Minimum board thickness: 10 mm
Power connection: 3 x 400 V, 50 Hz + zero + earth, 63 A
Speciﬁc power consumption: 15.9 kW/m³
Maximum heat output: 2 MW (230 °C - 250 °C thermal oil)
Heat consumption: 120 kWh/m³ wood
Autoclave length: 11,000 mm
Autoclave diameter: 1,800 mm
Autoclave material: 10 mm stainless steel duplex EN 4462
Door opens hydraulically, with 1.5 kW drive
Working pressure: 0.1 to 15 bar (absolute)
Working temperature: 0 °C to 220 °C
200 mm glass wool insulation, clad with 1 mm galvanized sheet steel

Main components:
1. autoclave, in which the heat treatment takes place
2. vacuum system that sucks the air out of the autoclave before heat is applied
3. energy center with a 2 MW oil burner
4. 4 MW cooling system with dry coolers
Fgsdpfxov Si Sze Ab Ajg
5. nitrogen generator
6. gas cooler system

Heating and cooling system:
Heat exchanger: 8 units (4 on each side)
Material: Stainless steel pipes (seawater resistant)
Total ﬂoor area: 165 m²
Cooling water consumption: 1000 l/batch (not contaminated, only heated)

Control and operation:
Control system: WTT ExoT (fully automatic)
22” color monitor, IBM computer, printer

Sensors:
4 PT100 temperature sensors
2 mechanical thermometers
1 vacuum/pressure transmitter
1 mechanical vacuum/pressure gauge

Special equipment:
Hydraulic rail bridge for convenient transportation of wooden trolleys
Automatic trolley extraction with cable winch (1.5 kW)
2 MW thermal oil boiler (heating)
Fuel oil tank (4000 l) with measuring system
Insulated 20 foot steel container for heating module
Stainless steel safety chimney (300 mm diameter, 6000 mm length)

Functional description:
1. filling the autoclave with wood
2. creating a pre-vacuum
3. filling with gas
4. heating
5. modifying
6. cooling
7. pressure equalization
8. creating a post-vacuum / drying
9. pressure equalization
10. emptying

Certiﬁed EC Pressure Equipment Directive (PED) 97/23/EF
Construction EN 13445

Sale on behalf of customer, from location near 5020 Salzburg (Austria), without dismantling, transportation and assembly
Dismantling, loading and transportation by us optionally possible

Subject to errors in the description and price

To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended

Sold as is

Technical details, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee
Subject to prior sale
For used machines, any warranty is excluded, the following applies: “purchased as seen”
Pictures and videos serve as examples and do not represent the actual scope of delivery

Terms of payment: Prices excl. VAT, payment before collection or dispatch

Terms of delivery: ex location

Seller

Last online: A week ago

Registered since: 2019

67 listings online

Call

Send inquiry

Telephone & Fax

+49 7361 ... show

Fax:

These listings may also fit your interest.

Listing

Two-shaft multi-saw with mechanization Socolest DAS 200

Miechucino

1,717 km

Two-shaft multi-saw with mechanization
SocolestDAS 200

Call

Condition: like new (used), Socolest DAS 200 twin-shaft multiblade feeding and receiving table - Made in Italy - centering feeding table - discharge receiving table Fgedpfequp Anjx Ab Ajg - top drawing rollers TECHNICAL PARAMETERS: - cutting height 200 mm - cutting width 400 mm - engine power 2 x 55 kW - track width 630 mm - disc diameter max 350 mm - feed speed 40 m / min - hydraulic roller height adjustment - hydraulic cutting height adjustment - hydraulic feed - four top pulling rollers - four rows of anti-rejection latches - shaft diameter 70 mm - sleeve diameter 90 mm - pneumatic side pressure centering - diameter of ferrules 2 x 250 mm - minimum workpiece length 720 mm - laser - feeding table belt 5700 mm - width of table 600 mm - top roller pneumatic pressure roller - speed of table regulated on inverter - receiving table 9200 mm - width of rollers 800 mm - diameter of rollers 135 mm - four drop chains - distance between chains 1900 mm Transport dimensions 1300 cm x 240 cm x 200 cm weight 8 t

See details

Listing

Automatic planer and moulder WEINIG Hydromat 1000

Bozen

1,593 km

Automatic planer and moulder
WEINIGHydromat 1000

Call

Condition: used, Year of construction: 2007, spindle diameter: 45 mm, number of spindles: 6, No. 3176 Automatic planer and moulder WEINIG Hydromat 1000 Used, year of construction 2007, machine already dismantled 6 spindles: bottom-right-left-top-top-bottom Electronic feed 6 - 60 m/min Working width 80 - 150 mm Working height 23 - 65 mm Finished slat widths 4 - 15 mm Max. number of slats 16 pieces Slat lengths 400 - 4000 mm 1st spindle horizontal at the bottom Brake motor 11 kW, 6000 rpm Spindle diameter 45 mm Tool flight circle 125 - 180 mm 2nd spindle vertical right Brake motor 7.5 kW, 6000 rpm Diameter 45 mm Tool flight circle 112 - 250 mm Max. Moulding depth 35 mm Axial adjustment travel 80 mm 3. spindle vertical left 7.5 kW, 6000 rpm Diameter 45 mm Tool flight circle 112 - 250 mm Max. Moulding depth 35 mm Axial adjustment travel 80 mm Pressure shoe in front of the spindle, swiveling away, pneumatic roller contact pressure 4. spindle horizontal top 15 kW, 6000 rpm, diameter 45 mm Tool flight circle 112 - 250 mm Max. Moulding depth 35 mm Axial adjustment path 45 mm Split pressure shoe in front of upper spindle, adjustable and swiveling away, pneumatic 5. horizontal top spindle as saw spindle Brake motor 37 kW, 5000 rpm Diameter 45 mm Axial adjustment travel reduced to 25 mm Tool flight circle 112 - 250 mm Max. Sawing depth 35 mm Fgjdeu Agh Sjpfx Ab Aeg Axial adjustment path 45 mm Split pressure shoe in front of upper spindle, adjustable and swiveling away, pneumatic 6. horizontal spindle at the bottom as saw spindle Brake motor 30 kW, 5000 rpm Axial adjustment travel reduced to 25 mm Diameter 45 mm Tool flight circle 112 - 250 mm Max. Sawing depth 35 mm Axial adjustment path 45 mm All moulder spindles with high-performance bearings Electronic feed 7.5 kW Adjustment travel of the feed rollers compared to the left-hand spindle, axial 35 mm Shorter roller distance compared to the right-hand spindles Running meter counter, electric, with 2 counters Short infeed table (1.2 m) with 2 driven rollers above the table 1 driven, toothed roller in the table, lateral pressure roller Automatic waxilite pump / lubricant pump Machine with 4-roller extension, pendulum shafts extended to 200 mm 2 driven, toothed rollers in the outfeed table 2 driven, toothed rollers in the machine table Pressure beam before and after upper spindle with mechanical digital display DigiSet (digital double display) for left and top spindles Electrical height adjustment of the upper spindles and the feed Sale on behalf of customer, ex location near 39100 Bolzano (Italy), without dismantling, without transport and assembly Dismantling, loading, and transport by us optionally available Subject to errors in the description and price To avoid any misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical specifications, condition description, year of construction and scope of delivery according to the manufacturer’s brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Photos and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices plus VAT, payment before collection or shipping Terms of delivery: Ex location

See details

Listing

Cegléd

2,095 km

Chamber dryer
ScolariDryer

€519,900

Fixed price plus VAT

Call

Condition: new, Year of construction: 2024, functionality: fully functional, Szárítórendszer - 1T 184 TPR Modell, (Mozgatható Szállítószalagos) Kiváló minőségű szárítórendszert kínálunk, mely ideális fafűrészpor, termény, újrahasznosítandó hulladék, ételipari alapanyagok szárítására. A szárítógép teljesen új állapotban van, eredeti csomagolásában. Fgodpfx Asua D U Ieb Asg

See details

Listing

Vacuum drying chamber, heated plate dryer ISVE 1,5

Karben

1,220 km

Vacuum drying chamber, heated plate dryer
ISVE1,5

Call

Listing

Stockheim

1,383 km

Drying chamber
VanicekV622/2D

Call

Year of construction: 1998, condition: ready for operation (used), functionality: fully functional, Vanicek drying chamber with post rack trolley Fjdpfx Abewxdqkj Aegg with in- and out-swing gates with control system and electrical control cabinet Dimensions: internal length 13.05 m, width 4.00 m, height 2.80 m Fan VMR 71-05-4, E-motor 1.1 kW/400V Dehumidification Ø 50, with actuator Dehumidification Ø 40, with actuator UGL sensors, humidification, heating valve (to be provided by client) Switchgear, heating coil, fan frame Stacking dimensions 1x12.5 m, 2x1.2 m, 2x1.0 m

See details

Listing

Brushing machine WOODLAND MACHINERY 1300-2S

Jonava

2,104 km

Brushing machine
WOODLAND MACHINERY1300-2S

€6,100

Fixed price plus VAT

Call

Listing

Automatic sharpener for carbide-tipped saw blades VOLLMER CHC 20 H

Geiselwind

1,352 km

Automatic sharpener for carbide-tipped saw blades
VOLLMERCHC 20 H

Call

Listing

Complete saw (stationary) Mebor - Complete sawmill line VTZ 1400, BM 900, SCEL 1000/10, VR 800 S

Slovenia

1,820 km

Complete saw (stationary)
Mebor - Complete sawmill lineVTZ 1400, BM 900, SCEL 1000/10, VR 800 S

€1,690,000

Fixed price plus VAT

Call

Condition: like new (used), Year of construction: 2023, functionality: fully functional, overall weight: 9,000 kg, cutting height (max.): 1,200 mm, cutting width (max.): 1,100 mm, roll diameter: 1,400 mm, total width: 2,100 mm, total length: 2,400 mm, input voltage: 220 V, saw band length: 10,450 mm, saw band width: 206 mm, power: 90 kW (122.37 HP), empty load weight: 19,000 kg, cutting speed: 40,000 mm/min, Equipment: cabin, We are selling a complete sawmill line with a VTZ 1400 PLUS vertical band saw from Mebor. The offer includes: - VTZ 1400 PLUS vertical band saw by Mebor - Heavy-duty log conveyor with loading arms - Log edger/canter BM900 by Mebor Fedpfxjxq Rgyo Ab Aegg - Operator cabin for the vertical band saw - Roller and chain conveyors - Edging line VR800 S by Mebor with servo-driven, high-speed circular saw positioning - Twin-shaft multi-blade circular saw VC 900 D by Mebor - Waste conveyor line - Chipper shredder for waste TH200/500/3 by Rudnick & Enners - Sorting line 47-14 by Holzmatic

See details

Listing

Planers/Moulding Machines SCM SUPERSET CLASS

Italy

2,009 km

Planers/Moulding Machines
SCMSUPERSET CLASS

Call

Listing

Beelen

1,113 km

Belt dryer
Babcock BSHTyp BDl460/22

Call

Condition: used, Year of construction: 1995, functionality: fully functional, total length: 36,000 mm, Ironing dryer, working width 4,600 mm, length 22,000 mm, of which 10,000 mm with press rollers, separate press cooling field, hot water heating medium, semi-automatic feeding device, type BFT46 and lifting platform, max. veneer length: 4,600 mm, roll width 600 mm, total length: 36,000 mm, 11 fans, PLC control renewed in 2017 Fgsdpfx Absv Hygfe Ajg A second ironing dryer of a similar design is available.

See details

Advertise here