Used Used Wood Lathe for sale (61,822)

Condition: good (used), Year of construction: 2010, functionality: fully functional, cooling capacity: 79 kW (107.41 HP), type of cooling: air, overall weight: 960 kg, total width: 1,300 mm, total length: 2,900 mm, total height: 2,100 mm, warranty duration: 6 months, AIRCOOLED CHILLER TRANE CGAM 030 79 kW Cooling capacity: 79 kw - 22.4 ton (12/7 — 35°C) Year of manufacture: 2010 Pgedpevn Nv Ejfx Ag Djw Heat exchanger: Plate Refrigerant circuit: 1 pcs. Type of refrigerant: R410A Compressors: 2 pcs. TRANE (scroll) Number of fans: 3 pcs. Dimensions: 2.9 x 1.3 x 2.1 m Weight: 960 kg Condition: Exelent

Condition: good (used), functionality: fully functional, Used, but fully operational complete line. The video shows the exact machine I am selling. New price starts at 337,605 USD without the upgrades. Please contact me for more details or pictures/videos. Pgjdpfx Aevn Ei Ujg Dow

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2012, operating hours: 19,000 h, Munch Pellet Mill with 2 only 200 hp motors (total 400 hp) electric controls and 60 hp centrifugal cooling fan also second 2011 model 650 pellet mill and 2 skids of new rolls and dies and spare parts. Second mill 2011 has no motors. It is working machine ready for use in case 2012 machine had problem. Psdpfsxc Nt Nsx Ag Djgw

Condition: new, Year of construction: 2025, power: 11 kW (14.96 HP), Rotary drum dryer for drying various kinds of materials like sand, biomass, sawdust, red mud, bentonite, coal Diameter: 1200mm Length: 10000mm Power: 11-13KW Gradient: 3% Capacity: 1.5-3 t/h Weight: 14Tons Besides this model, we also have the other models of rotary drum dryer 1500x12000mm, 2400x20000mm, and complete drying system for various materials, welcome to contact us for more details Our factory can design suitable solution according to your specific requirements. Rotary drum dryers are highly efficient machines used extensively in the processing of wood chips, sawdust, and biomass. They operate by utilizing a rotating drum that heats and dries the materials as they are transported through the cylinder. The design of these dryers allows them to handle a wide range of particle sizes and moisture levels, making them suitable for various types of biomass. They can also tolerate high-temperature exhaust gases, which contributes to their efficiency and versatility in industrial applications. Rotary Drum Dryer for Wood Chip, Sawdust, Biomass 🌳 Introduction to Rotary Drum Dryers In the realm of biomass processing, moisture control is key. Enter the Rotary Drum Dryer, an indispensable machine designed to efficiently reduce the moisture content of wood chips, sawdust, and biomass. This essential tool enhances productivity, improves fuel quality, and is pivotal in biomass energy production. Let’s explore its functionality and benefits! 💡 💼 Key Benefits of Using a Rotary Drum Dryer Pgodpfx Asq Igyvsg Djw 1. Energy Efficiency: Designed to optimize energy use, Rotary Drum Dryers consume less power while delivering high drying efficiency. 🌿💡 2. High Capacity: Capable of handling large volumes of biomass, these dryers are perfect for industrial applications where large-scale drying is needed. 🏭 3. Improved Product Quality: By achieving the optimal moisture content, the dryer enhances the quality of biomass for fuel, pellets, and other applications. 🔥 4. Versatility: Suitable for a wide range of materials including wood chips, sawdust, and various types of biomass, making it a versatile tool in any biomass processing plant. 🌳 # Application Fields and Materials of Rotary Drum Dryer II. Application Fields A. Agriculture - Drying of grains, seeds, and forage. - Processing of agricultural by-products like straw and husks. B. Food Industry - Dehydration of food products such as fruits, vegetables, and spices. - Preservation of food quality during drying. C. Chemical Industry - Drying of chemical powders, granules, and crystals. - Application in the production of fertilizers and detergents. D. Mining and Minerals - Drying of ores, coal, and mineral concentrates. - Reduction of moisture content for easier handling and processing. E. Construction Materials - Drying of sand, cement, and other construction aggregates. - Preparation of materials for manufacturing processes. F. Pharmaceuticals - Drying of pharmaceutical powders and active ingredients. III. Materials Processed by Rotary Drum Dryer A. Organic Materials - Biomass, wood chips, sawdust, and animal feed. B. Inorganic Materials - Sand, clay, limestone, and gypsum. C. Waste Products - Sludge from wastewater treatment plants. - Industrial by-products for recycling or reuse.

Condition: new, Year of construction: 2025, turning diameter over cross slide: 250 mm, turning length: 730 mm, turning diameter: 500 mm, spindle speed (max.): 1,800 rpm, CNC lathe machine CK 6150 with flat bed We offer a new CNC lathe machine model CK6150. We use this machine in our production and you can see it in operation before ordering. The CK 6150 lathe has a flat bed and hardening guides, which ensures a long period of operation of the equipment. The machine is equipped with a CNC system, the GSK CNC system is installed as standard. Optionally, the machine can be equipped with a Fanuc or Siemens CNC system. Pgedpfxexdmgvo Ag Dew The machine can have a tool holder for 4-6 or 8 tools, depending on the customer's wishes. It is possible to install a hydraulic chuck on the machine, which will greatly simplify the process of installing parts on it and a hydraulic tailstock. The CK 6150 lathe can be equipped with additional supporting frame for more accurate manufacturing of long parts. Technical specifications: Model CK 6150 x 1000 Maximum workpiece diameter over bed 500 mm Maximum workpiece diameter over support 250 mm Maximum workpiece length 1000 mm Maximum turning length 730 mm Spindle bore diameter 82 mm Spindle speed 150-1800 rpm Engine power 7.5 kW Mechanical chuck (hydraulic optional) Chuck size 250 mm. 4-position tool holder (6 or 8 optional) Maximum tool size for tool holder 25x25 mm Machine weight 2700 kg Machine dimensions 2650×1700×1820 mm We can also supply lathes CK 6140, CK 6150 and CK 6160 with other dimensions of the working part: CK 6140 dimensions of the working part 550/750 mm CK 6150 dimensions of the working part 1000/1500/2000 mm CK 6160 dimensions of the working part 1000/1500/2000 mm CK 6152E dimensions of the working part 1000/1500/2000/3000 mm CK 6165E dimensions of the working part 1000/1500/2000/3000 mm CK 6165E dimensions of the working part 1000/1500/2000/3000 mm CK 6185E dimensions of the working part 1000/1500/2000/3000/4000 mm CK 61100E dimensions of the working part 1000/1500/2000/3000 mm CK 61125E dimensions of the working part 1000/1500/2000/3000 mm

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, cooling capacity: 624 kW (848.40 HP), type of cooling: air, overall weight: 4,780 kg, total width: 2,300 mm, total length: 6,800 mm, total height: 2,400 mm, warranty duration: 6 months, heating capacity: 674 kW (916.38 HP), Aircooled chiller/Heat pump Daikin EWYQ630F 624 kW / 674 kW Cooling capacity: 624 kW / 177.4 tons (12/7 — 35°C) Heating capacity: 674 kW / 191.6 tons (40/45 —7°C) Year of manufacture: 2017 Options: Heat pump. Hydraulic module Refrigerant circuit: 2 pcs. Heat exchanger: Plate Condenser: Copper / Aluminum Compressors: 6 pcs. Copeland ZP485KCE-TWD-522 (scroll) Type of refrigerant: R410a Number of fans: 14 pcs. Daikin YDK1200-6AD Pedpfxsvl E A As Ag Djgw Hydraulic module: 1 pcs. water pump LOWARA PLM132B14S3/3110 (frequency converter) Dimensions: 6.8x2.3x2.4 m Weight: 4780 kg Condition: Excellent

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, type of cooling: air, overall weight: 2,310 kg, total width: 1,100 mm, total length: 4,400 mm, total height: 1,800 mm, warranty duration: 6 months, heating capacity: 265.5 kW (360.98 HP), HEAT PUMP KEYTER KWE6270QEP4W 265,5 Kw Heating capacity: 265.5 kW / 75.6 tons (40/45 — 7°C) Year of manufacture: 2019 Options: Hydraulic module Pedpfx Aovf Ebxog Djgw Refrigerant circuit: 2 pcs. Condenser: Copper / Aluminum Heat exchanger: Plate Type of refrigerant: R410A Compressors: 2 pcs. DANFOSS DSH240A4APC + DANFOSS DSH295A4APC (scroll) Number of fans: 3 pcs. EBMPAPST A3G800-AU25-01 Hydraulic module: 2 pcs. water pump EBARA 30/1 50-160/7.4 expansion vessel. Weight: 2310 kg. Dimensions: 4.4 x 1.1 x 1.8 m. Working hours: 1024/1024/1477/1474 h. Condition: Excellent

Condition: used, Year of construction: 2003, operating hours: 23,000 h, Equipment: all wheel drive, Liebherr 924 !!! SPECIAL EXCAVATOR FOR FOREST/WOOD !!!! built in 2003 23000h New pump with invoice 16200¤ New engine with invoice 17700¤ 16ton winch with RADIO Balloon tires Pgedpfx Asvm N Dteg Dow Hiab wood tongs built in 2016 Tel: We do your financing or leasing Sale EU: net after presentation of company documents and tax/VAT number Sale outside EU: deposit 500¤ we speak English govorimo srpsko-hrvatski our service for you:* Export papers and EUR1 * Customs license plate Transport worldwide * Accommodation options Transfer Munich airport or Passau train station Tel:

Condition: used, maximum load weight: 24,200 kg, overall weight: 30,000 kg, axle configuration: > 3 axles, first registration: 11/2011, Equipment: ABS, Manufacturer HFR Model 30 t. 4 axles Timber transport / Wood transport Year 2011 Condition Good Serial Number UH9PX301125HF1141 Ref. nr. 7949 Reg. date: 25-11-2011 Last seen: 10-12-2024 Disc brake: ? ABS: ? Rear axles: BPW Suspension: Air Tire Size: 265 / 70R19,5 Cover% left 100 - 100 - 80 - 100% Total weight: 30000 kg. Net weight: 5800 kg. Load capacity 24200 kg. Inside length: 7400 mm. Psdsw N Uuyjpfx Ag Djgw

Condition: used, 630x4000 Pgodpfx Ajcncghjg Djw Under power.

Condition: new, functionality: fully functional, Year of construction: 2025, Product overviews of Waste Industrial Timber Wood Pallet Double Shaft Shredder Shredders can generally be used to shred hard-to-break plastics, rubber, large tires, large nylon materials, large pieces of fishing nets, fibers, paper, wood, electrical devices, cables, PET bottles, cardboard, wood, plastic barrels, etc. Solid objects. The main function of the equipment is to squeeze the bulk materials and large-diameter drum metal materials that are not convenient for transportation through the shear of the shredder, and shred them into sheets that meet the requirements. The main structure of the double-shaft shredder is a feed hopper, a knife roller, a driving device, a bearing, a hydraulic system, and an electric control box system. Working principle: All kinds of waste materials enter the shredding chamber through the feeding hopper. The double-knife rollers do relative rotation to shred and cut the materials, and then the materials are discharged from the shredder to achieve the shredding of large pieces of materials. Applicable materials and fields Double shaft shredder is one of ethential equipment for waste recycling in following fields and materials: +Bulky Waste: Sofa,Mattress,Chair, Funiture,Windows,etc +Industrial Waste: Textiles,Leather,Rubbers, Leathers ,General industrial waste,etc +Hazardous Solid waste: Medical waste,Paint sludge,Radioactive waste,Hazardous waste oil drum,Jumbo bag,etc +Paper waste: Carton,Cardboard,Book,Newspaper,Document,Brochure,Packaging paper,etc +Garden waste: Branch, Wood pallet, Trunks, Boards,etc Pgedpfx Ajvn D I Nsg Djw +Domestic waste +Biomass straw: Straw, Bamboo, Corn, Sorghum straw, Bean straw, Fruit shell, Palm shell, etc +Scrap metal: Car Shell, Aluminum casting, Household appliances, Scrap light metal,Automobile hub,etc +Paper mill waste: Paper mill slag, Paper mill rope, Paper mill offcut,etc +Wood pallet, scrap furniture, waste chair, tree roots recycling, etc. Double shaft shredder main body: The main body is welded with excellent steel plate to ensure the stability of the equipment under heavy load for a long time. Bearing: The bearing seat is split and easy to disassemble, and the movable knife, fixed knife, bearing and other parts can be quickly removed, and it is easy to maintain and replace the knife. The sealing structure can avoid the contact of broken materials and grease, and can also protect bearings and gears when handling liquid materials.

Condition: used, Year of construction: 2003, operating hours: 23,000 h, Equipment: all wheel drive, Liebherr 924 !!! SPECIAL EXCAVATOR FOR FOREST/WOOD !!!! built in 2003 23000h New pump with invoice 16200¤ New engine with invoice 17700¤ 16ton winch with RADIO Balloon tires Hiab wood tongs built in 2016 Tel: We do your financing or leasing Sale EU: net after presentation of company documents and tax/VAT number Sale outside EU: deposit 500¤ we speak English govorimo srpsko-hrvatski our service for you:* Export papers and EUR1 * Customs license plate Transport worldwide * Accommodation options Transfer Munich airport or Passau train station Pgodpfevm N Dgsx Ag Djw Tel:

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: V16TC1548, workpiece weight (max.): 8,000 kg, workpiece diameter (max.): 2,000 mm, faceplate diameter: 1,600 mm, workpiece height (max.): 1,350 mm, faceplate torque: 18,000 Nm, TECHNICAL DETAILS Faceplate diameter: 1,600 mm Maximum faceplate torque: 18,000 Nm Psdsxvxrbopfx Ag Dsgw Maximum thread milling diameter: 1,800 mm Maximum facing diameter: 1,800 mm Maximum distance between the faceplate and the clamping surface of the inserted tool slide: 1,550 mm Slide dimensions: 220 × 220 mm Maximum workpiece diameter: 2,000 mm Maximum slide stroke: 900 mm Maximum workpiece height when using the 200 mm tool holder: 1,350 mm Maximum workpiece weight, depending on faceplate rotation: 8,000 kg Maximum tool shank diameter: 40 mm Maximum crossrail travel: 800 mm Crossrail feed rate: 170 mm/min Working feed rate: 1–2,000 mm/min Rapid traverse: 10,000 mm/min Feed per revolution: 0.001–50 mm/rev Rotating tool spindle speed, programmable in two ranges 1st range: 1–1,200 rpm 2nd range: 1,200–2,400 rpm Tool holder: ISO50 MACHINE DETAILS Total power requirement: 80 kW Dimensions & Weight Footprint approx.: 4.4 x 4.62 m Machine weight approx.: 25 t EQUIPMENT C-axis

Condition: ready for operation (used), Year of construction: 2013, operating hours: 24,412 h, functionality: fully functional, turning length: 1,000 mm, turning diameter: 300 mm, travel distance X-axis: 235 mm, travel distance Z-axis: 1,144 mm, controller model: OSP P300L-R, TECHNICAL DETAILS X-axis travel: 235 mm Pgodpfxjxxi Uls Ag Dow Z-axis travel: 1,144 mm Turning length: 1,000 mm Turning diameter: 300 mm Swing over bed: 450 mm Turret: 12 positions – all driven Spindle speed: 45 – 4,500 rpm Spindle bore: 68 mm Tool holder: VDI 40 MACHINE DETAILS Control: OSP P300L-R Weight: 6,600 kg Operating hours: 24,412 h EQUIPMENT Chip conveyor Chuck diameter 250 mm Touch setter Tailstock

Condition: ready for operation (used), Year of construction: 2005, functionality: fully functional, turning diameter: 380 mm, travel distance X-axis: 230 mm, travel distance Y-axis: 100 mm, travel distance Z-axis: 575 mm, bar passage: 77 mm, CNC Lathe with Loading and Unloading Robot and Chip Conveyor! TECHNICAL DETAILS Travel X-axis: 230 mm Travel Y-axis: 100 mm Travel Z-axis: 575 mm Maximum machining diameter: 380 mm Maximum cross slide swing diameter: 675 mm Maximum distance between spindles: 541 mm Maximum bar capacity: 77 mm Rapid traverse X-axis: 30 m/min Rapid traverse Y-axis: 21 m/min Pjdpoxxl S Tofx Ag Djgw Rapid traverse Z-axis: 33 m/min Main Spindle Speed: 4,000 rpm Motor (100% / 30 min): 22 / 26 kW Spindle bore: 88 mm Sub Spindle Speed: 6,000 rpm Motor (25% duty cycle): 7.5 kW Travel: 585 mm Tool Turret with Live Tools Number of stations: 12 Maximum speed: 4,500 rpm Motor: 5.5 kW Tool shank height: 25 mm Tool shank diameter: 40 mm MACHINE DETAILS Operating hours: approx. 66,000 h DIMENSIONS & WEIGHT Installation area (L x W x H): 285 x 187 x 187 cm Machine weight: 5,400 kg EQUIPMENT Mitsubishi RV-12SL-S12 loading and unloading robot Interface for bar feeder Automatic parts catcher Automatic door High-pressure cooling, 5 bar Chip conveyor

Condition: ready for operation (used), Year of construction: 2000, functionality: fully functional, machine/vehicle number: 1216/0166, spindle speed (max.): 10,000 rpm, bar diameter (max.): 16 mm, counter spindle speed (max.): 8,000 rpm, number of slots in tool magazine: 21, Equipment: chip conveyor, TECHNICAL DETAILS Max. Bar Diameter: 16 mm Axes: 7 linear axes + C-axes for main and sub spindle Main Spindle Spindle bore (main spindle): 18 mm Main spindle motor power: 3.7 kW Main spindle speed range: 10,000 rpm Main spindle indexing: C-axis, Full-C (0.001°) Max. drilling diameter (main spindle): 10 mm Max. thread size (main spindle): M8 / M6 Sub Spindle Max. clamping diameter (sub spindle): 16 mm Workpiece length (sub spindle): 125 mm Max. drilling diameter (sub spindle): 8 mm Max. thread size (back side): M6 Sub spindle speed range: 250 – 6,000 rpm (Full C-axis) Gang Tool Carrier Max. drilling diameter: 4.8 mm Max. thread size: M4 Max. speed: 200 – 8,000 rpm Turret Max. drilling diameter: 4.8 mm Max. thread size: M5 Max. speed: 200 – 6,500 / 8,000 rpm Driven Tools on the Back Side Max. drilling diameter: 5 mm Max. thread size: M5 Pgedpfx Agjxxlrye Dew Max. speed: up to 8,000 rpm Tools Total tool capacity: 21 positions Gang slide: 8 positions Turret: 10 positions Back side tools: 3 positions Turning tool shank: 10 × 10 mm Drill sleeve shank diameter: 19.05 mm Rapid traverse X/Z/Y: 32 m/min Rapid traverse X2/Y2: 8 – 16 m/min MACHINE DETAILS Control: Mitsubishi Dimensions & Weight Footprint (L × W × H): 2.0 m × 1.05 m × 1.7 m Weight: 2,500 – 2,950 kg Power Consumption (Rated): 7.9 kVA Main switch: 40 A EQUIPMENT Chip conveyor Parts conveyor Parts catcher Fire extinguishing system

Condition: used, Year of construction: 2014, functionality: fully functional, turning length: 3,200 mm, turning diameter: 900 mm, spindle speed (max.): 1,500 rpm, travel distance X-axis: 470 mm, travel distance Z-axis: 3,235 mm, spindle motor power: 45 W, total height: 2,780 mm, total length: 7,360 mm, quill travel distance: 150 mm, quill diameter: 160 mm, swing diameter over cross slide: 800 mm, overall weight: 21,800 kg, swing diameter over bed slide: 1,030 mm, bar passage: 164 mm, spindle nose: A1-15, Doosan Puma 700L Large Capacity Lathe Pgedpewqf Uujfx Ag Dsw Built 2014 Accessories include Swarf Conveyor, Tailstock with Mt #6 Taper, SMW Hydraulic Steady, 800mm 3 Jaw Chuck, FANUC 32i Control.

Condition: ready for operation (used), Year of construction: 2007, operating hours: 6,615 h, functionality: fully functional, machine/vehicle number: R2EV3403, turning length: 310 mm, turning diameter: 220 mm, spindle speed (max.): 6,300 rpm, turning diameter over bed slide: 430 mm, bar passage: 45 mm, TECHNICAL DETAILS Work Area Swing over bed: 430 mm Max. turning diameter: 220 mm Max. turning length: 310 mm Max. bar capacity: 45 mm Distance between centers: 687 mm Carriage Travel X-axis travel: 160 mm Z-axis travel: 310 mm Main Spindle Spindle nose to DIN: 55026 KK5 Front spindle bearing diameter: 80 mm Hollow clamping cylinder max. through bore: 45 mm Max. chuck size: 160 mm Speed range (infinitely variable): 0–6,300 rpm Max. torque: 78 Nm Pgjdpfx Aexvrv Teg Dow C Axis (Rotary Axis) Resolution: 0.001° Spindle indexing (disc brake, for driven tools): 0.01° Feed Drives Feed force X: 4 N Feed force Z: 6 N Rapid traverse speed X: 20 m/min Rapid traverse speed Z: 24 m/min Acceleration time from 0 to rapid traverse X/Z: 0.2 s Positioning spread P₉ as per VDI 3441 in X/Z: 3 / 3 µm Tool System Tool holders to DIN: 69880 VDI30 Tool cross section for square shank tools: 20 x 20 mm Shank diameter for boring bars: Ø32 mm Number of tool stations / powered (option): 12 / 6 Turret indexing time: 0.14 s MACHINE DETAILS Total power requirement: 17 kW Dimensions & Weight Footprint: 2.25 x 1.63 x 1.94 m Machine weight: 3.3 t Operating hours: 6,615 h EQUIPMENT - Integrated holding brake for driven tools - Disc turret with direction logic - AC motors on X and Z axes

Condition: ready for operation (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: M216/0316, spindle speed (max.): 10,000 rpm, bar diameter (max.): 16 mm, clamping diameter: 16 mm, counter spindle speed (max.): 8,000 rpm, Equipment: chip conveyor, TECHNICAL DETAILS Axes: 7 linear axes + C-axes for main and sub spindle Main Spindle Motor power: 3.7 kW Speed range: 10,000 rpm Indexing: 0.001° full C-axis Max. drilling diameter, frontal machining: 10 mm Max. thread size, frontal machining: M8 / M6 Sub Spindle Max. clamping diameter: 16 mm Workpiece length: 125 mm Max. drilling diameter: 8 mm Max. thread size, rear side: M6 Speed range: 250 – 6,000 rpm Gang Tool Holder (upper) Max. drilling diameter: 4.8 mm Max. thread size: M4 Speed: 200 – 8,000 rpm Turret, driven tools: Max. drilling diameter: 4.8 mm Max. thread size: M5 Speed: 200 – 6,500 / 8,000 rpm Pgodpfxsxxll Te Ag Dow Driven Tools, rear side Max. drilling diameter: 5 mm Max. thread size: M5 Max. speed: 8,000 rpm Tools Tool stations: 21 Gang slide: 8 positions Turret: 10 positions Rear side tools: 3 positions Tool Holders Turning tool shank: 10 × 10 mm Drill sleeve diameter: 19.05 mm Rapid Traverse Rapid traverse X/Y/Z: 32 m/min Rapid traverse X2/Y2: 8 – 16 m/min MACHINE DETAILS Control: Mitsubishi Dimensions & Weight Footprint (L × W × H): 2.0 m × 1.05 m × 1.7 m Weight: 2,500 – 2,950 kg Power consumption (nominal): 7.9 kVA Main switch: 40 A EQUIPMENT Chip conveyor Parts conveyor belt Parts catcher Fire extinguishing system

Condition: ready for operation (used), Year of construction: 2000, functionality: fully functional, machine/vehicle number: R6A N3602, turning length: 520 mm, turning diameter: 360 mm, overall weight: 3,800 kg, TECHNICAL DETAILS Pjdpfxjxvrruj Ag Dogw Turning diameter: 360 mm Turning length: 520 mm MACHINE DETAILS Total power requirement: 20 kW Dimensions & Weight Required space: 3 x 2 x 2 m Machine weight: 3.8 t

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, machine/vehicle number: M212/0062, turning length: 200 mm, spindle speed (max.): 12,000 rpm, bar diameter (max.): 12 mm, counter spindle speed (max.): 6,000 rpm, Equipment: chip conveyor, In recent years, investments exceeding €25,000 have been made in maintenance and repairs. Occasionally, a system error occurs (sporadically, e.g., after 2–5 days of operation); after powering the machine off and on, it is fully operational again. TECHNICAL DETAILS Max. bar diameter: 12 mm Max. machining length: 200 mm Axes: 7 linear axes + C-axes for main and sub-spindle Main spindle Spindle bore max.: approx. 14 mm Motor power: approx. 2.2 kW Speed range: 200 – 12,000 rpm Indexing: C-axis, full-C (0.001°) Front machining max. drilling diameter: 6 mm Max. thread: M6 Sub-spindle Clamping diameter max.: 12 mm Part length, rear side: 125 mm Max. drilling diameter: 5 mm Max. thread: M5 Speed range: 250 – 6,000 rpm Gang tool holder Max. drilling diameter: 5 mm Max. thread: M4 Max. speed: 200 – 8,000 rpm Turret Max. drilling diameter: 5 mm Max. thread: M5 Max. speed: 200 – 6,500 rpm Back working tools Max. drilling diameter: 5 mm Max. thread: M5 Speed: up to 8,000 rpm Tools Tool stations: 21 positions Gang slide: 8 positions Turret: 10 positions Back working tools: 3 positions Turning tool shank: 10 × 10 mm Drill bush diameter: 19.05 mm Rapid traverse X/Z/Y: 32 m/min Pgodpfx Ajxxlw Nsg Djw Rapid traverse X2/Y2: approx. 8–16 m/min MACHINE DETAILS Control: Mitsubishi Dimensions & weight Footprint L × W × H: approx. 2.5 m × 1.25 m × 1.7 m Weight: approx. 2,500 kg Power consumption (rated): approx. 6 kVA EQUIPMENT Chip conveyor

Condition: ready for operation (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: R2AP3901, turning length: 700 mm, turning diameter: 220 mm, travel distance X-axis: 160 mm, turning diameter over bed slide: 430 mm, workpiece length (max.): 510 mm, TECHNICAL DETAILS Turning diameter: 220 mm Turning length: 700 mm / 665 mm Swing diameter over bed: 430 mm Max. part length: 510 mm X-axis travel: 160 mm Spindle bore diameter: 45 mm MACHINE DETAILS Total power requirement: 17 kW Dimensions & Weight Required space approx.: 2.63 x 1.98 x 1.94 m Pgsdpfexvrn Njx Ag Dew Machine weight approx.: 2.6 t

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, machine/vehicle number: 1212/0058, turning length: 200 mm, spindle speed (max.): 12,000 rpm, bar diameter (max.): 12 mm, counter spindle speed (max.): 6,000 rpm, number of slots in tool magazine: 21, TECHNICAL DETAILS Maximum bar diameter: 12 mm Maximum machining length: 200 mm Axes: 7 linear axes + C axes for main and sub-spindle Main Spindle Spindle bore: 14 mm Motor power: 2.2 kW Speed range: 200 – 12,000 rpm Indexing: C axis, full-C (0.001°) Front machining maximum drilling diameter: 6 mm Maximum thread: M6 Sub-Spindle Maximum clamping diameter: 12 mm Part length (back side): 125 mm Maximum drilling diameter: 5 mm Maximum thread: M5 Maximum speed range: 250 – 6,000 rpm Gang Tool Holder Maximum drilling diameter: 5 mm Maximum thread: M4 Maximum speed: 200 – 8,000 rpm Turret Maximum drilling diameter: 5 mm Maximum thread: M5 Maximum speed: 200 – 6,500 rpm Maximum thread: M5 Maximum speed: 8,000 rpm Pgsdpfxexxlvre Ag Dew Tool Stations Total tool capacity: 21 positions Gang slide: 8 positions Turret: 10 positions Back working tools: 3 positions Tool Holders Turning tool: 10 × 10 mm Drill sleeves: diameter 19.05 mm Rapid traverse X/Z/Y: 32 m/min Rapid traverse X2/Y2: 8 – 16 m/min MACHINE DETAILS Control: Mitsubishi Dimensions & Weight Footprint (L × W × H): 2.5 m × 1.25 m × 1.7 m Weight: 2,500 kg Power Consumption (Rated): 6 kVA EQUIPMENT Chip conveyor

Condition: ready for operation (used), Year of construction: 2013, functionality: fully functional, machine/vehicle number: S.1003825.001, faceplate diameter: 800 mm, workpiece length (max.): 800 mm, workpiece width (max.): 720 mm, TECHNICAL DETAILS Faceplate diameter: 800 mm Clamping diameter: 800 mm Max. workpiece dimensions: 800 x 720 mm Tool interface: Capto C6 Tool magazine positions: 2 x 80 MACHINE DETAILS Psdpexvrhvefx Ag Dogw Total power requirement: 110 kW Dimensions & Weight Approximate machine weight: 37,000 kg / total 52,000 kg Transport dimensions (machine): 5.07 x 2.98 x 3.90 m EQUIPMENT C-axis

Condition: ready for operation (used), Year of construction: 2003, functionality: fully functional, turning length: 320 mm, spindle speed (max.): 8,000 rpm, turning diameter: 32 mm, spindle bore: 39 mm, controller model: Mitsubishi Meldas, TECHNICAL DETAILS Maximum machining diameter: 32 mm Maximum machining length per clamping: 320 mm Main spindle speed: 8,000 rpm Spindle bore: 39 mm Sub spindle (rear-side spindle): 32 mm Max. frontal milling/drilling: 12 mm Max. frontal thread cutting: M12 Tool capacity: 30 tools Number of axes: 7 Pgjdpsxxlkpsfx Ag Dew MACHINE DETAILS Control: Mitsubishi Meldas Connected load: 10 kW Dimensions & Weight Dimensions (L x W): 2,800 mm × 1,240 mm Machine weight: 2,800–2,900 kg EQUIPMENT High-pressure coolant system Fire suppression system Chip conveyor Parts catcher Parts conveyor belt 4 driven tool holders Standard tool holders