Used Used Silos for sale (44,560)

Condition: used, Used large-volume container, also known as a pallet box, made from recycled polypropylene (RPP), stackable and equipped with four swivel casters and a flap on the long side. Two of the four swivel casters are equipped with brakes. The container has a maximum load capacity of 500 kg and a capacity of 540 liters. The container can Knjdox Hugxspfx Aa Eof

Condition: used, Year of construction: 2014, empty load weight: 630 kg, Year: 2013-2014. Electric. Dimensions: 1.30 x 0.78 meters. Lifting capacity: 200 kilos. Knodpfjw S Nuyjx Aa Ejf Weight: 630 kilos. With CE certificate and safety inspection. incl. new batteries Price: €4,250. Ex VAT

Year of construction: 1999, condition: good (used), 4 bitumen storage silos Year: 1999 Kedpfx Aexzilpoa Esnf Capacity: 65,000 litres Price: €19,000 each

Condition: used, Belt sanding machine BÜRKLE BSU 2500/800 - used - Sanding belt cover, Extraction fan ----- Technical data ----- Table size: 2,500 x 800 mm, Motor: 5.5 kW, Sanding belt dimensions (LxW): 7,200 mm Knedpfx Aajxlt Ebe Esf

Condition: excellent (used), ABB IRC5 Controller USED DEVELOPMENT OF GSG ROBOTICS Knsdpsxq Tvdofx Aa Eof GSG Robotics GmbH,Founded in 2005 in Gütersloh, GSG Robotics GmbH has been based in Marl since 2015 with a generous service area for robot maintenance and repair. Over the years, we have developed to be a holistic partner in all matters relating to industrial robots and automation technology. We are a full-service provider for the two well-known robot manufacturers ABB and Fanuc.

Condition: excellent (used), - Dough capacity: 120 kg - Flour capacity: 75 kg Kjdpfewxvk Nsx Aa Eenf - Bowl capacity: 45 L - 2 speeds - With safety lid - Voltage: 400 V

Condition: ready for operation (used), Year of construction: 2020, operating hours: 10,000 h, functionality: fully functional, clamping force: 9,000 kN, screw diameter: 100 mm, displacement volume: 3,691 cm³, Clamping force 9000 kN Distance between tie bars (h x v) 1180 x 1000 mm Mould opening stroke 1600 / 1000 mm Mould height min 500 / 1400 mm Max. daylight 2400 mm Hydraulic ejector - stroke 300 mm Ksdpfx Asxcakroa Ejnf Ejector force 195 kN Injection unit: Screw diameter 100 mm Ls/D ratio 22 Injection pressure 1800 bar Stroke volume 3691 ccm Shot weight (PS) 3359 gr. Screw speed 135 1/min Plasticising rate max. 793 g/s Electric and Hydraulic Equipment: Nominal capacity of pump motor 85 kW Installed heating capacity 71 kW Reservoir capacity 780 ltr. Dimensions and weights: Dimensions of the machine ca. 9,24 x 3,21 x 2,88 m Total machine weight 38000 kg Accessories: - Anti vibration pads - 4 x 8-fold water flower Additional Options: - 2 x Air valves - 2 x hydr. Core pulls on movable plate - 2 x hydr. core pulls on fix plate - 1 x pneum. Core pull on movable plate - 1 x pneum. Core pull on fix plate - Robot interface according to Euromap 67

Condition: used, Cryogenic gas tank vessel used for Ethylene (ethene, C2H4). Ksdpfsx Hykcjx Aa Ejnf Export from EU We have also other tanks for different gases please contact us for more details

Condition: used, Year of construction: 2012, machine/vehicle number: IntNr230381, used CNC Tsugami HS2075AX with B-axis, year of manufacture 2012 Operating hours: 7,200 Control: Fanuc 31i-A Maximum machining length: 250 mm Number of controlled axes: 7 (up to 5-axis simultaneous machining) B-axis: 0°–130°, freely programmable Bar capacity: Ø 3 mm to max. Ø 20 mm Main spindle drive power: 3.7 kW Counter spindle drive power: 2.2 kW Main spindle speed: 10,000 rpm Counter spindle speed: 10,000 rpm C-axis: available on both main and counter spindle Number of linear tool carriers: 2 Total number of tools: 35 Dimensions (LxWxH): 2,110 x 1,200 x 1,885 mm Weight: 3,300 kg Convertible between long and short turning Deep-hole drilling stations NAKANISHI high-speed spindle Rear turret with Y-axis Cross-drilling on rear side Chip conveyor Fire suppression system FMB Minimag 20 bar feeder, year 2012 The machine can be inspected under power by prior arrangement. Technical data and information are subject to change and error; prior sale reserved. Knsdpfx Aajx Hib Rj Ejf

Condition: used, Veneer Press BÜRKLE U 80 - used - Emergency stop cable, Control via push button ----- Technical Data ----- Pressing area: 2,550 x 1,300 mm Knedexfg A Hjpfx Aa Eof Power per heating plate: 9,100 W Max. opening height: 4,000 mm Number of cylinders: 6 pcs. Dimensions (LxWxH): 3,150 x 1,450 x 1,785 mm Weight: 3,700 kg

Condition: used, Year of construction: 2007, operating hours: 32,000 h, machine/vehicle number: IntNr231374, STAR SA 16R CNC sliding head lathe, year of manufacture 2007 CNC control: FANUC 18i-T Operating hours: 32,000 Technical specifications: - Number of axes: 5 - Number of spindles: 2 MAIN SPINDLE - Maximum bar diameter: 16 mm - Z-axis travel: 140 mm - Spindle speed: 8,000 rpm - Spindle drive power: 2.2 kW Ksdsx Hiagspfx Aa Eenf - Number of tool stations: 13 SUB SPINDLE - Maximum bar diameter: 12 mm - Spindle speed: 8,000 rpm - Number of tool stations: 4 FMB Minimag bar feeder The machine can be inspected under power by appointment. Subject to prior sale. Technical specifications and details are subject to change and error.

Condition: excellent (used), -Dimensions: 500x860x1070mm -Serial number: 1006026 -Model: SM-25 -Dough capacity: 25 kg -Flour capacity: 15 kg -Bowl: 8 l -Year: 2010 -Digital control -Timer: for both speeds -Voltage: 220V -Power: 2.2 kW -Weight: 130 kg -Refurbished equipment: The equipment is prepared upon order, collection and return deadlines are agreed at this time (please request price after refurbishment) Ksdpfx Aaowxvlae Esnf

Condition: used, * For Weinig: Unimat, Profimat, Unicontrol, etc * For SCM: Profiiset, Sintex, Topset, and many more Knedpfx Aelnlgtsa Esf * Please send us an inquiry with the required dimensions.

Year of construction: 2005, condition: used, Item: AV-1832-Vertical-Tank140m3 Vertical Silos Tanks capacity 140.000 L Exterior dimensions: Dia Ø 3500 mm Total H 16750 mm. Vertical stainless steel tanks - 6 pcs. Standing on 4 legs. Knodpfxoh A H E Ee Aa Eef Klóper bottom with 4" outlet. Klóper top with ventilation. AISI 304

Condition: used, Year of construction: 2019, machine/vehicle number: IntNr231109, Technical data: first-class condition, only approx. 9000 operating hours Fanuc, high-performance CNC control series 31i-B5, 3-channel control, 3 turrets, 12 CNC axes, (X1/Z1/Y1/C1/X2/Z2/Y2/YA2/C2/X3/Z3/Y3), Rapid traverse speed 30 mm/min, Bar diameter max. 38 mm, Turning length max. 350 mm, Main spindle, max. speed 7,000 rpm, C-axis 0.001 degrees, Main spindle drive power 11 kW Counter spindle speed max. 7,000 rpm, C-axis 0.001 degrees, Counter spindle drive power 7.5 kW Turret Speed max. 5,700 rpm, (with corresponding tool holder also higher) Turret drive power 4 kW Tool holder stations for a total of 30 (10 per turret) (prepared for internally cooled tools) Tool holder set, (non-driven) Guide bushing unit (pull system, JBS) Oil cooler unit High-pressure conveyor (with integrated high-pressure unit) type Müller combistream CS 3 Coolant: Oil Weight: 6.25 tons Dimensions: (LxWxH) 3477x1860x1865 mm The machine can be inspected under power by appointment. Changes and errors in the technical data and information as well as prior sale reserved! Technical data: first-class condition, only approx. 9000 operating hours Ksdpfjx Hib Djx Aa Ejnf Fanuc, high performance CNC control series 31i-B5, 3-channel-control, 3 turrets, 12 CNC axes, (X1/Z1/Y1/C1/X2/Y2/YA2/C2/X3/Z3/Y3), rapid traverse speed 30 mm/min, bar diameter max. 38 mm, turning length max. 350 mm, main spindle, speed max. 7,000 rpm, C-axis 0.001 deg, main spindle drive power 11 kW Counter spindle speed max. 7,000 rpm, C-axis 0.001 deg, counter spindle drive power 7.5 kW Turret speed max. 5,700 rpm, (with appropriate tool holder also higher) turret drive power 4 kW Tool holder stations for a total of 30 (10 per turret) (prepared for internally cooled tools) Tool holder set, (non-driven) Guide bushing unit (tension system, JBS) Oil cooler unit High-pressure conveyor (with integrated high-pressure unit) type Müller combistream CS 3 coolant application: oil Weight: 6,25 to Dimensions: (LxWxH) 3477x1860x1865 mm The machine can be inspected under power by appointment. Changes and errors in the technical data and information and subject to prior sale!

Year of construction: 2016, condition: used, Empty weight: 150 kg CE mark: yes Transport dimensions (LxWxH): 1,05x1,2x2,2 Please contact Kenny Bongers, Tijmen Pesselse, DPX Power or Arjen van Dijk for more information Used tank Kedpfex Am Anjx Aa Eenf Capacity:1000 Liter 2 identical units available

Condition: like new (used), Year of construction: 2022, machine/vehicle number: IntNr231085, IntNr231085 1449 Oil/emulsion mist extraction system AR FILTRATIONI S.R.L. Extraction series ARNO 2: Air purifier mechanical AR 5-stage for emulsion mist/oil smoke Air output 2600 m3/h (1.5kW) Voltage frequency 230/400 50 V Hz Noise level dBa approx. 70 Stage 1 - centrifugal condenser, self-cleaning Stage 2 - metal mesh filter, washable Stage 3 - pocket filter Stage 4 - fine filter mat, washable Stage 5 - HEPA fine filter Filter performance of the entire unit: up to 99.97% • Quick and easy maintenance, once a year, high operational reliability • Robust design, small space requirement • Recovery of up to 80% of the condensed coolant • Design and function in accordance with current standards • Energy savings of around 415.00 euros per air purifier • Reduction of Emission of 9,000 kg CO2/year/system • Protection of the sensitive parts of the machine tool • Protects the environment and people Dimensions: approx. 990 x 570 x 1400 [mm] Weight: approx. 120 [kg] Delivery time at short notice by arrangement. The machine can be inspected by appointment. Subject to changes and errors in the technical data and information as well as prior sale! Knodpfex Hh Uiex Aa Ejf IntNo231084 AR FILTRATIONI S.R.L. Extraction series ARNO 2: Mechanical AR 5-stage air purifier for emulsion mist/oil smoke Air flow rate 2600 m3/h (1.5kW) Voltage Frequency 230/400 50 V Hz Noise level dBa approx. 70 Stage 1 - Centrifugal condenser, self-cleaning Stage 2 - Metal mesh filter, washable Stage 3 - Pocket filters Stage 4 - Fine filter mat, washable Stage 5 - Hepa ultra-fine filter Filter performance of the entire unit: up to 99.97% - Quick and easy maintenance, once a year, high operational reliability - Robust design, low space requirement - Recovery of up to 80% of the condensed cooling lubricant - Design and function in accordance with current standards - Energy savings of approx. 415.00 euros per air purifier - Reduction in emissions of 9,000 kg CO2/year/system - Protects the sensitive parts of the machine tool - Protects the environment and people Dimensions: approx. 990 x 570 x 1400 [mm] Weight: approx. 120 [kg] Delivery time at short notice by arrangement. The machine can be inspected by appointment. Changes and errors in the technical data and information as well as reserved before sale!

Condition: used, - Dimensions: 2150x1330x2100 mm - Door dimensions: 1010x1900 mm - 2 trolleys 600x800 or 800x800 - Serial number: 10130992 - Year of manufacture: 2005 - Voltage: 400 V - Frequency: 50 Hz Ksdpfx Aaox Arzco Esnf - Operating temperature: 32°C - Heating capacity: 2.5 kW - Cooling capacity: 2.99 kW - Weight: 420 kg

Condition: used, Maximum load: 750 kg Knsdpfxjlf Iy Ne Aa Eef

Condition: new, Year of construction: 2025, Item: A-10196-SS-horizontaltank-50m3 Capacity 50.000 L Exterior dimensions: L 8817 mm H 3200 mm Ø 2800 mm. Knjdpfxsq Daf No Aa Eef Horisontal stainless steel tank AISI 304. Newer used - NEW!

Condition: used, Year of construction: 2007, machine/vehicle number: IntNr231209, Item Description: Used LNS Express 220 Bar Feeder Year of Manufacture: 2007 Type: Bar Feeder Technical Details: Diameter Range: 2 mm to 20 mm Channel Diameter: 22 mm Maximum Bar Length: 3,000 mm Installation Dimensions (L × W × H): 3,970 × 480 × 1,250 mm Weight: approx. 850 kg Condition: Age-related wear and tear in line with the year of manufacture. Plexiglass cover is damaged; no other known faults. Special Features: Knjdpfx Aex Hia Tja Eof Stability and Precision: Structurally identical to the Express 220 and 320, built on the same base as the Express 332. Provides optimal stability and vibration-free operation, ensuring high surface quality and dimensional accuracy at maximum productivity levels. Loading Capacity: Integrated loading ramp with a capacity of 240 mm allows for long periods of autonomous operation. Fast Diameter Changeover: Quick retooling of the channel guide in less than 2 minutes. Complete change of the guide elements possible in under 8 minutes. Guidance for 2–20 mm Bar Stock: Special channel guide system prevents bars from kicking out. Automatic opening of the channel guide during material feed-through. Summary: The LNS Express 220 stands out with its robust construction, ease of use, and high reliability. This used model, despite age-related wear and minor defects, remains a solid basis for precise and efficient production processes. The machine can be inspected under power by appointment. Modifications and errors in technical data and specifications as well as prior sale reserved.

Condition: like new (used), Year of construction: 2022, machine/vehicle number: IntNr231084, IntNr231084 1449 Oil/emulsion mist extraction system AR FILTRATIONI S.R.L. Extraction series ARNO 2: Air purifier mechanical AR 5-stage for emulsion mist/oil smoke Air output 2600 m3/h (1.5kW) Voltage frequency 230/400 50 V Hz Noise level dBa approx. 70 Stage 1 - centrifugal condenser, self-cleaning Stage 2 - metal mesh filter, washable Stage 3 - pocket filter Stage 4 - fine filter mat, washable Stage 5 - HEPA fine filter Filter performance of the entire unit: up to 99.97% • Quick and easy maintenance, once a year, high operational reliability • Robust design, small space requirement • Recovery of up to 80% of the condensed coolant • Design and function in accordance with current standards • Energy savings of around 415.00 euros per air purifier • Reduction of Emission of 9,000 kg CO2/year/system • Protection of the sensitive parts of the machine tool • Protects the environment and people Dimensions: approx. 990 x 570 x 1400 [mm] Weight: approx. 120 [kg] Delivery time at short notice by arrangement. The machine can be inspected by appointment. Subject to changes and errors in the technical data and information as well as prior sale! Knedsx Hh T Sspfx Aa Ejf IntNo231084 AR FILTRATIONI S.R.L. Extraction series ARNO 2: Mechanical AR 5-stage air purifier for emulsion mist/oil smoke Air flow rate 2600 m3/h (1.5kW) Voltage Frequency 230/400 50 V Hz Noise level dBa approx. 70 Stage 1 - Centrifugal condenser, self-cleaning Stage 2 - Metal mesh filter, washable Stage 3 - Pocket filters Stage 4 - Fine filter mat, washable Stage 5 - Hepa ultra-fine filter Filter performance of the entire unit: up to 99.97% - Quick and easy maintenance, once a year, high operational reliability - Robust design, low space requirement - Recovery of up to 80% of the condensed cooling lubricant - Design and function in accordance with current standards - Energy savings of approx. 415.00 euros per air purifier - Reduction in emissions of 9,000 kg CO2/year/system - Protects the sensitive parts of the machine tool - Protects the environment and people Dimensions: approx. 990 x 570 x 1400 [mm] Weight: approx. 120 [kg] Delivery time at short notice by arrangement. The machine can be inspected by appointment. Changes and errors in the technical data and information as well as reserved before sale!

Condition: used, Year of construction: 2003, operating hours: 43,000 h, machine/vehicle number: IntNr231372, STAR SA 12 CNC sliding headstock lathe, year 2003 CNC control: FANUC 18i-T Operating hours: 43,000 Technical data: - Number of axes: 5 - Number of spindles: 2 MAIN SPINDLE - Max. bar diameter: 12 mm - Z-axis travel: 140 mm - Spindle speed: 8,000 rpm - Spindle drive power: 2.2 kW - Number of tool stations: 13 COUNTER SPINDLE - Max. bar diameter: 10 mm - Spindle speed: 8,000 rpm Knjdpfx Ajx Hia Hsa Ejf - Number of tool stations: 4 Includes FMB Minimag bar feeder. The machine can be inspected under power by appointment. Specifications and details subject to change, error, and prior sale.

Condition: used, Year of construction: 2020, operating hours: 6,875 h, machine/vehicle number: IntNr231185, EMAG WEISS cylindrical grinding machine EMAG WEISS type W11-CNC / UNIVERSAL CYLINDRICAL GRINDING MACHINE W 11-CNC SL650 Spindle hours: approx. 6,850 hours Power on hours: 20,422 hours This machine is characterized by its 2 in 1 control concept: 100% conventional cylindrical grinding or switching to 100% CNC cylindrical grinding Technical data: • Control: CNC-controlled (depending on year of manufacture Heidenhain, Siemens or Fanuc) Grinding length max. mm 650 / 1,500; in 25.5 / 59 Centre height mm 200 in 8 Grinding diameter outside mm1 / 390 in 0 / 15.5 Max. weight flying MK 4 kg 100 / lb 220.5 Max. workpiece weight between centres kg 250 /lb 551 Feed: X-axis travel mm 380 / 480 /in 15 / 19 Feed: Z-axis travel mm 1,150 / 1,650 in 45.5 / 65 Grinding wheel diameter mm 400 / 500 in 15.5 / 19.5 Rated power (100% ED) kW 9 / 11 hp 12 / 15 Peripheral speed m/s 20 - 50 Machine equipment: • Grinding wheel drive: Powerful Motor for precise grinding results • Tailstock: Adjustable tailstock for different workpiece lengths • Workpiece holder: Chuck or centering points (depending on the application) • Coolant system: Integrated, to avoid overheating and for optimal grinding results • User-friendly interface: Intuitive CNC user interface for easy programming and control • Measuring systems for real-time monitoring and quality assurance • Machine bed Cast bed Karstens base with high static-dynamic rigidity • X-axis High-precision linear guides, ball screw and glass scale • Z-axis V-flat or linear guides, ball screw and glass scale • Control Touch screen with integrated CNC control based on Windows Dialog programming, DIN programming, program memory. • Technical equipment Electrical cabinet according to VDE with CE mark • Coolant system and extraction system • Paper belt filter system with 250 | Container • Mechanical fume extraction with 1600 m²/3 with control without support foot • Measuring axis for moving to multiple diameters with wide range • Measuring head. Measuring position freely programmable. • Prepare robot interface. • Only provide 10 x l / O without interface plug software and PLC Applications: • Cylindrical external and internal machining • Precision grinding for mechanical engineering, the automotive industry and toolmaking • Production of shafts, bushings, rollers and other rotationally symmetrical workpieces Special features: • High rigidity of the machine body for vibration-free work • CNC control for complex grinding cycles and flexible processing • Adaptation to customer-specific requirements possible Optionally retrofittable Equipment: Kjdpfx Ajx Hh R Dsa Esnf • Automated loading and unloading systems • Special mounts and special grinding wheel holders Optional grinding wheels available: • See photos The machine can be inspected by appointment. Subject to changes and errors in the technical data and information as well as prior sale! EMAG WEISS Cylindrical Grinding Machine EMAG WEISS Type W11-CNC / UNIVERSAL CIRCULAR GRINDING MACHINE W 11-CNC SL650 Spindle Hours: approximately 6,850 hours Power On Hours: 20,422 hours 2 in 1 control concept characterizes this machine: 100% conventional cylindrical grinding or switch to 100% CNC cylindrical grinding Technical data: - Control: CNC-controlled (Heidenhain, Siemens or Fanuc, depending on year of manufacture) Grinding length max. mm 650 / 1,500 ; in 25.5/59 Center height mm 200 in 8 External grinding Ø mm1 / 390 in 0 / 15.5 max. weight fl

Condition: used, Year of construction: 2003, operating hours: 31,000 h, machine/vehicle number: IntNr231369, STAR SA 16RC CNC sliding head lathe, year of manufacture 2003 FANUC 18i-T CNC control Operating hours: 31,000 Technical specifications - Number of axes: 5 - Number of spindles: 2 MAIN SPINDLE - Max. bar diameter: 16 mm - Z-axis travel: 140 mm - Spindle speed: 8,000 rpm - Spindle drive power: 2.2 kW - Number of tool positions: 13 COUNTER SPINDLE - Max. bar diameter: 12 mm Kedpfx Asx Hh Rdja Ejnf - Spindle speed: 8,000 rpm - Number of tool positions: 4 FMB Minimag bar feeder included The machine can be inspected under power by appointment. Specifications and details subject to change and error. Prior sale reserved!